Debian Policy Manual
Footnotes

1

Informally, the criteria used for inclusion is that the material meet one of the following requirements:

Standard interfaces

The material presented represents an interface to the packaging system that is mandated for use, and is used by, a significant number of packages, and therefore should not be changed without peer review. Package maintainers can then rely on this interface not changing, and the package management software authors need to ensure compatibility with this interface definition. (Control file and changelog file formats are examples.)

Chosen Convention

If there are a number of technically viable choices that can be made, but one needs to select one of these options for inter-operability. The version number format is one example.

Please note that these are not mutually exclusive; selected conventions often become parts of standard interfaces.

2

Compare RFC 2119. Note, however, that these words are used in a different way in this document.

3

The Debian archive software uses the term "component" internally and in the Release file format to refer to the division of an archive. The Debian Social Contract simply refers to "areas." This document uses terminology similar to the Social Contract.

4

See What Does Free Mean? for more about what we mean by free software.

5

It is possible that there are policy requirements which the package is unable to meet, for example, if the source is unavailable. These situations will need to be handled on a case-by-case basis.

6

This is an important criterion because we are trying to produce, amongst other things, a free Unix.

7

A sample implementation of such a whitelist written for the Mailman mailing list management software is used for mailing lists hosted by alioth.debian.org.

8

The detailed procedure for gracefully orphaning a package can be found in the Debian Developer's Reference (see Related documents, Section 1.4).

9

The blurb that comes with a program in its announcements and/or README files is rarely suitable for use in a description. It is usually aimed at people who are already in the community where the package is used.

10

Essential is needed in part to avoid unresolvable dependency loops on upgrade. If packages add unnecessary dependencies on packages in this set, the chances that there will be an unresolvable dependency loop caused by forcing these Essential packages to be configured first before they need to be is greatly increased. It also increases the chances that frontends will be unable to calculate an upgrade path, even if one exists.

Also, functionality is rarely ever removed from the Essential set, but packages have been removed from the Essential set when the functionality moved to a different package. So depending on these packages just in case they stop being essential does way more harm than good.

11

Debconf or another tool that implements the Debian Configuration Management Specification will also be installed, and any versioned dependencies on it will be satisfied before preconfiguration begins.

12

See the file upgrading-checklist for information about policy which has changed between different versions of this document.

13

Rationale:

14

The reason for this is that dependencies change, and you should list all those packages, and only those packages that you need directly. What others need is their business. For example, if you only link against libimlib, you will need to build-depend on libimlib2-dev but not against any libjpeg* packages, even though libimlib2-dev currently depends on them: installation of libimlib2-dev will automatically ensure that all of its run-time dependencies are satisfied.

15

Mistakes in changelogs are usually best rectified by making a new changelog entry rather than "rewriting history" by editing old changelog entries.

16

Although there is nothing stopping an author who is also the Debian maintainer from using this changelog for all their changes, it will have to be renamed if the Debian and upstream maintainers become different people. In such a case, however, it might be better to maintain the package as a non-native package.

17

To be precise, the string should match the following Perl regular expression:

     /closes:\s*(?:bug)?\#?\s?\d+(?:,\s*(?:bug)?\#?\s?\d+)*/i

Then all of the bug numbers listed will be closed by the archive maintenance software (dak) using the version of the changelog entry.

18

In the case of a sponsored upload, the uploader signs the files, but the changelog maintainer name and address are those of the person who prepared this release. If the preparer of the release is not one of the usual maintainers of the package (as listed in the Maintainer or Uploaders control fields of the package), the first line of the changelog is conventionally used to explain why a non-maintainer is uploading the package. The Debian Developer's Reference (see Related documents, Section 1.4) documents the conventions used.

19

This is the same as the format generated by date -R.

20

The rationale is that there is some information conveyed by knowing the age of the file, for example, you could recognize that some documentation is very old by looking at the modification time, so it would be nice if the modification time of the upstream source would be preserved.

21

This is not currently detected when building source packages, but only when extracting them.

Hard links may be permitted at some point in the future, but would require a fair amount of work.

22

Setgid directories are allowed.

23

Another common way to do this is for build to depend on build-stamp and to do nothing else, and for the build-stamp target to do the building and to touch build-stamp on completion. This is especially useful if the build routine creates a file or directory called build; in such a case, build will need to be listed as a phony target (i.e., as a dependency of the .PHONY target). See the documentation of make for more information on phony targets.

24

This split allows binary-only builds to not install the dependencies required for the build-indep target and skip any resource-intensive build tasks that are only required when building architecture-independent binary packages.

25

The fakeroot package often allows one to build a package correctly even without being root.

26

Some packages support any delimiter, but whitespace is the easiest to parse inside a makefile and avoids ambiguity with flag values that contain commas.

27

Packages built with make can often implement this by passing the -jn option to make.

28

files.new is used as a temporary file by dpkg-gencontrol and dpkg-distaddfile - they write a new version of files here before renaming it, to avoid leaving a corrupted copy if an error occurs.

29

For example, parts of the GNU build system work like this.

30

Having multiple copies of the same code in Debian is inefficient, often creates either static linking or shared library conflicts, and, most importantly, increases the difficulty of handling security vulnerabilities in the duplicated code.

31


dpkg's internal databases are in a similar format.

32

The paragraphs are also sometimes referred to as stanzas.

33

This folding method is similar to RFC 5322, allowing control files that contain only one paragraph and no multiline fields to be read by parsers written for RFC 5322.

34

It is customary to leave a space after the package name if a version number is specified.

35

In the past, people specified the full version number in the Standards-Version field, for example "2.3.0.0". Since minor patch-level changes don't introduce new policy, it was thought it would be better to relax policy and only require the first 3 components to be specified, in this example "2.3.0". All four components may still be used if someone wishes to do so.

36

Alphanumerics are A-Za-z0-9 only.

37

One common use of ~ is for upstream pre-releases. For example, 1.0~beta1~svn1245 sorts earlier than 1.0~beta1, which sorts earlier than 1.0.

38

The author of this manual has heard of a package whose versions went 1.1, 1.2, 1.3, 1, 2.1, 2.2, 2 and so forth.

39

Completely empty lines will not be rendered as blank lines. Instead, they will cause the parser to think you're starting a whole new record in the control file, and will therefore likely abort with an error.

40

Example distribution names in the Debian archive used in .changes files are:

unstable

This distribution value refers to the developmental part of the Debian distribution tree. Most new packages, new upstream versions of packages and bug fixes go into the unstable directory tree.

experimental

The packages with this distribution value are deemed by their maintainers to be high risk. Oftentimes they represent early beta or developmental packages from various sources that the maintainers want people to try, but are not ready to be a part of the other parts of the Debian distribution tree.

Others are used for updating stable releases or for security uploads. More information is available in the Debian Developer's Reference, section "The Debian archive".

41

The source formats currently supported by the Debian archive software are 1.0, 3.0 (native), and 3.0 (quilt).

42

Other urgency values are supported with configuration changes in the archive software but are not used in Debian. The urgency affects how quickly a package will be considered for inclusion into the testing distribution and gives an indication of the importance of any fixes included in the upload. Emergency and critical are treated as synonymous.

43

A space after each comma is conventional.

44

That is, the parts which are not the .dsc.

45

This is so that if an error occurs, the user interrupts dpkg or some other unforeseen circumstance happens you don't leave the user with a badly-broken package when dpkg attempts to repeat the action.

46

This can happen if the new version of the package no longer pre-depends on a package that had been partially upgraded.

47

For example, suppose packages foo and bar are "Installed" with foo depending on bar. If an upgrade of bar were started and then aborted, and then an attempt to remove foo failed because its prerm script failed, foo's postinst abort-remove would be called with bar only "Half-Installed".

48

This is often done by checking whether the command or facility the postrm intends to call is available before calling it. For example:

     if [ "$1" = purge ] && [ -e /usr/share/debconf/confmodule ]; then
             . /usr/share/debconf/confmodule
             db_purge
     fi

in postrm purges the debconf configuration for the package if debconf is installed.

49

Part of the problem is due to what is arguably a bug in dpkg.

50

Historical note: Truly ancient (pre-1997) versions of dpkg passed <unknown> (including the angle brackets) in this case. Even older ones did not pass a second argument at all, under any circumstance. Note that upgrades using such an old dpkg version are unlikely to work for other reasons, even if this old argument behavior is handled by your postinst script.

51

This approach makes dependency resolution easier. If two packages A and B are being upgraded, the installed package A depends on exactly the installed package B, and the new package A depends on exactly the new package B (a common situation when upgrading shared libraries and their corresponding development packages), satisfying the dependencies at every stage of the upgrade would be impossible. This relaxed restriction means that both new packages can be unpacked together and then configured in their dependency order.

52

It is possible that a future release of dpkg may add the ability to specify a version number for each virtual package it provides. This feature is not yet present, however, and is expected to be used only infrequently.

53

To see why Breaks is normally needed in addition to Replaces, consider the case of a file in the package foo being taken over by the package foo-data. Replaces will allow foo-data to be installed and take over that file. However, without Breaks, nothing requires foo to be upgraded to a newer version that knows it does not include that file and instead depends on foo-data. Nothing would prevent the new foo-data package from being installed and then removed, removing the file that it took over from foo. After that operation, the package manager would think the system was in a consistent state, but the foo package would be missing one of its files.

54

Replaces is a one way relationship. You have to install the replacing package after the replaced package.

55

There is no Build-Depends-Arch; this role is essentially met with Build-Depends. Anyone building the build-indep and binary-indep targets is assumed to be building the whole package, and therefore installation of all build dependencies is required.

The autobuilders use dpkg-buildpackage -B, which calls build, not build-arch since it does not yet know how to check for its existence, and binary-arch. The purpose of the original split between Build-Depends and Build-Depends-Indep was so that the autobuilders wouldn't need to install extra packages needed only for the binary-indep targets. But without a build-arch/build-indep split, this didn't work, since most of the work is done in the build target, not in the binary target.

56

Build-Depends in the source package is not adequate since it (rightfully) does not document the exact version used in the build.

57

The archive software might reject packages that refer to non-existent sources.

58

This is a convention of shared library versioning, but not a requirement. Some libraries use the SONAME as the full library file name instead and therefore do not need a symlink. Most, however, encode additional information about backwards-compatible revisions as a minor version number in the file name. The SONAME itself only changes when binaries linked with the earlier version of the shared library may no longer work, but the filename may change with each release of the library. See Run-time shared libraries, Section 8.1 for more information.

59

The package management system requires the library to be placed before the symbolic link pointing to it in the .deb file. This is so that when dpkg comes to install the symlink (overwriting the previous symlink pointing at an older version of the library), the new shared library is already in place. In the past, this was achieved by creating the library in the temporary packaging directory before creating the symlink. Unfortunately, this was not always effective, since the building of the tar file in the .deb depended on the behavior of the underlying file system. Some file systems (such as reiserfs) reorder the files so that the order of creation is forgotten. Since version 1.7.0, dpkg reorders the files itself as necessary when building a package. Thus it is no longer important to concern oneself with the order of file creation.

60

These are currently /usr/local/lib plus directories under /lib and /usr/lib matching the multiarch triplet for the system architecture.

61

During install or upgrade, the preinst is called before the new files are unpacked, so calling "ldconfig" is pointless. The preinst of an existing package can also be called if an upgrade fails. However, this happens during the critical time when a shared libs may exist on-disk under a temporary name. Thus, it is dangerous and forbidden by current policy to call "ldconfig" at this time.

When a package is installed or upgraded, "postinst configure" runs after the new files are safely on-disk. Since it is perfectly safe to invoke ldconfig unconditionally in a postinst, it is OK for a package to simply put ldconfig in its postinst without checking the argument. The postinst can also be called to recover from a failed upgrade. This happens before any new files are unpacked, so there is no reason to call "ldconfig" at this point.

For a package that is being removed, prerm is called with all the files intact, so calling ldconfig is useless. The other calls to "prerm" happen in the case of upgrade at a time when all the files of the old package are on-disk, so again calling "ldconfig" is pointless.

postrm, on the other hand, is called with the "remove" argument just after the files are removed, so this is the proper time to call "ldconfig" to notify the system of the fact that the shared libraries from the package are removed. The postrm can be called at several other times. At the time of "postrm purge", "postrm abort-install", or "postrm abort-upgrade", calling "ldconfig" is useless because the shared lib files are not on-disk. However, when "postrm" is invoked with arguments "upgrade", "failed-upgrade", or "disappear", a shared lib may exist on-disk under a temporary filename.

62

For example, a package-name-config script or pkg-config configuration files.

63

This wording allows the development files to be split into several packages, such as a separate architecture-independent libraryname-headers, provided that the development package depends on all the required additional packages.

64

Previously, ${Source-Version} was used, but its name was confusing and it has been deprecated since dpkg 1.13.19.

65

A shlibs file represents an SONAME as a library name and version number, such as libfoo VERSION, instead of recording the actual SONAME. If the SONAME doesn't match one of the two expected formats (libfoo-VERSION.so or libfoo.so.VERSION), it cannot be represented.

66

dpkg-shlibdeps will use a program like objdump or readelf to find the libraries and the symbols in those libraries directly needed by the binaries or shared libraries in the package.

67

The easiest way to call dpkg-shlibdeps correctly is to use a package helper framework such as debhelper. If you are using debhelper, the dh_shlibdeps program will do this work for you. It will also correctly handle multi-binary packages.

68

dh_shlibdeps from the debhelper suite will automatically add this option if it knows it is processing a udeb.

69

Again, dh_shlibdeps and dh_gencontrol will handle everything except the addition of the variable to the control file for you if you're using debhelper, including generating separate substvars files for each binary package and calling dpkg-gencontrol with the appropriate flags.

70

A good example of where this helps is the following. We could update libimlib with a new version that supports a new revision of a graphics format called dgf (but retaining the same major version number) and depends on a new library package libdgf4 instead of the older libdgf3. If we used ldd to add dependencies for every library directly or indirectly linked with a binary, every package that uses libimlib would need to be recompiled so it would also depend on libdgf4 in order to retire the older libdgf3 package. Since dependencies are only added based on ELF NEEDED attribute, packages using libimlib can rely on libimlib itself having the dependency on an appropriate version of libdgf and do not need rebuilding.

71

An example of an "unreasonable" program is one that uses library interfaces that are documented as internal and unsupported. If the only programs or libraries affected by a change are "unreasonable" ones, other techniques, such as declaring Breaks relationships with affected packages or treating their usage of the library as bugs in those packages, may be appropriate instead of changing the SONAME. However, the default approach is to change the SONAME for any change to the ABI that could break a program.

72

An example may clarify. Suppose the source package foo generates two binary packages, libfoo2 and foo-runtime. When building the binary packages, the contents of the packages are staged in the directories debian/libfoo2 and debian/foo-runtime respectively. (debian/tmp could be used instead of one of these.) Since libfoo2 provides the libfoo shared library, it will contain a symbols file, which will be installed in debian/libfoo2/DEBIAN/symbols, eventually to be included as a control file in that package. When dpkg-shlibdeps is run on the executable debian/foo-runtime/usr/bin/foo-prog, it will examine the debian/libfoo2/DEBIAN/symbols file to determine whether foo-prog's library dependencies are satisfied by any of the libraries provided by libfoo2. Since those binaries were linked against the just-built shared library as part of the build process, the symbols file for the newly-built libfoo2 must take precedence over a symbols file for any other libfoo2 package already installed on the system.

73

This can be determined by using the command

     		  readelf -d /usr/lib/libz.so.1.2.3.4 | grep SONAME

74

An example of where this may be needed is with a library that implements the libGL interface. All GL implementations provide the same set of base interfaces, and then may provide some additional interfaces only used by programs that require that specific GL implementation. So, for example, libgl1-mesa-glx may use the following symbols file:

     		  libGL.so.1 libgl1
     		  | libgl1-mesa-glx #MINVER#
     		  publicGlSymbol@Base 6.3-1
     		  [...]
     		  implementationSpecificSymbol@Base 6.5.2-7 1
     		  [...]

Binaries or shared libraries using only publicGlSymbol would depend only on libgl1 (which may be provided by multiple packages), but ones using implementationSpecificSymbol would get a dependency on libgl1-mesa-glx (>= 6.5.2-7)

75

This field should normally not be necessary, since if the behavior of any symbol has changed, the corresponding symbol minimal-version should have been increased. But including it makes the symbols system more robust by tightening the dependency in cases where the package using the shared library specifically requires at least a particular version of the shared library development package for some reason.

76

If you are using debhelper, dh_makeshlibs will take care of calling either dpkg-gensymbols or generating a shlibs file as appropriate.

77

This is what dh_makeshlibs in the debhelper suite does. If your package also has a udeb that provides a shared library, dh_makeshlibs can automatically generate the udeb: lines if you specify the name of the udeb with the --add-udeb option.

78

This is necessary in order to reserve the directories for use in cross-installation of library packages from other architectures, as part of multiarch.

79

This is necessary for architecture-dependant headers file to coexist in a multiarch setup.

80

This directory is used as mount point to mount virtual filesystems to get access to kernel information.

81

These directories are used to store translators and as a set of standard names for mount points, respectively.

82

/lib/lsb/init-functions, which assists in writing LSB-compliant init scripts, may fail if set -e is in effect and echoing status messages to the console fails, for example.

83

Creating, modifying or removing a file in /usr/lib/mime/packages/ using maintainer scripts will not activate the trigger. In that case, it can be done by calling dpkg-trigger --no-await /usr/lib/mime/packages from the maintainer script after creating, modifying, or removing the file.

84

If you are using GCC, -fPIC produces code with relocatable position independent code, which is required for most architectures to create a shared library, with i386 and perhaps some others where non position independent code is permitted in a shared library.

Position independent code may have a performance penalty, especially on i386. However, in most cases the speed penalty must be measured against the memory wasted on the few architectures where non position independent code is even possible.

85

Some of the reasons why this might be required is if the library contains hand crafted assembly code that is not relocatable, the speed penalty is excessive for compute intensive libs, and similar reasons.

86

Some of the reasons for linking static libraries with the -fPIC flag are if, for example, one needs a Perl API for a library that is under rapid development, and has an unstable API, so shared libraries are pointless at this phase of the library's development. In that case, since Perl needs a library with relocatable code, it may make sense to create a static library with relocatable code. Another reason cited is if you are distilling various libraries into a common shared library, like mklibs does in the Debian installer project.

87

You might also want to use the options --remove-section=.comment and --remove-section=.note on both shared libraries and executables, and --strip-debug on static libraries.

88

A common example are the so-called "plug-ins", internal shared objects that are dynamically loaded by programs using dlopen(3).

89

These files store, among other things, all libraries on which that shared library depends. Unfortunately, if the .la file is present and contains that dependency information, using libtool when linking against that library will cause the resulting program or library to be linked against those dependencies as well, even if this is unnecessary. This can create unneeded dependencies on shared library packages that would otherwise be hidden behind the library ABI, and can make library transitions to new SONAMEs unnecessarily complicated and difficult to manage.

90

Single UNIX Specification, version 3, which is also IEEE 1003.1-2004 (POSIX), and is available on the World Wide Web from The Open Group after free registration.

91

These features are in widespread use in the Linux community and are implemented in all of bash, dash, and ksh, the most common shells users may wish to use as /bin/sh.

92

This is necessary to allow top-level directories to be symlinks. If linking /var/run to /run were done with the relative symbolic link ../run, but /var were a symbolic link to /srv/disk1, the symbolic link would point to /srv/run rather than the intended target.

93

This notification could be done via a (low-priority) debconf message, or an echo (printf) statement.

94

It's better to use mkfifo rather than mknod to create named pipes so that automated checks for packages incorrectly creating device files with mknod won't have false positives.

95

The dpkg-maintscript-helper tool, available from the dpkg package, can help for this task.

96

Rationale: There are two problems with hard links. The first is that some editors break the link while editing one of the files, so that the two files may unwittingly become unlinked and different. The second is that dpkg might break the hard link while upgrading conffiles.

97

The traditional approach to log files has been to set up ad hoc log rotation schemes using simple shell scripts and cron. While this approach is highly customizable, it requires quite a lot of sysadmin work. Even though the original Debian system helped a little by automatically installing a system which can be used as a template, this was deemed not enough.

The use of logrotate, a program developed by Red Hat, is better, as it centralizes log management. It has both a configuration file (/etc/logrotate.conf) and a directory where packages can drop their individual log rotation configurations (/etc/logrotate.d).

98

When a package is upgraded, and the owner or permissions of a file included in the package has changed, dpkg arranges for the ownership and permissions to be correctly set upon installation. However, this does not extend to directories; the permissions and ownership of directories already on the system does not change on install or upgrade of packages. This makes sense, since otherwise common directories like /usr would always be in flux. To correctly change permissions of a directory the package owns, explicit action is required, usually in the postinst script. Care must be taken to handle downgrades as well, in that case.

99

Ordinary files installed by dpkg (as opposed to conffiles and other similar objects) normally have their permissions reset to the distributed permissions when the package is reinstalled. However, the use of dpkg-statoverride overrides this default behavior.

100

Internally, the package system normalizes the GNU triplets and the Debian arches into Debian arch triplets (which are kind of inverted GNU triplets), with the first component of the triplet representing the libc and ABI in use, and then does matching against those triplets. However, such triplets are an internal implementation detail that should not be used by packages directly. The libc and ABI portion is handled internally by the package system based on the os and cpu.

101

The Debian base system already provides an editor and a pager program.

102

If it is not possible to establish both locks, the system shouldn't wait for the second lock to be established, but remove the first lock, wait a (random) time, and start over locking again.

103

You will need to depend on liblockfile1 (>>1.01) to use these functions.

104

There are two traditional permission schemes for mail spools: mode 600 with all mail delivery done by processes running as the destination user, or mode 660 and owned by group mail with mail delivery done by a process running as a system user in group mail. Historically, Debian required mode 660 mail spools to enable the latter model, but that model has become increasingly uncommon and the principle of least privilege indicates that mail systems that use the first model should use permissions of 600. If delivery to programs is permitted, it's easier to keep the mail system secure if the delivery agent runs as the destination user. Debian Policy therefore permits either scheme.

105

This implements current practice, and provides an actual policy for usage of the xserver virtual package which appears in the virtual packages list. In a nutshell, X servers that interface directly with the display and input hardware or via another subsystem (e.g., GGI) should provide xserver. Things like Xvfb, Xnest, and Xprt should not.

106

"New terminal window" does not necessarily mean a new top-level X window directly parented by the window manager; it could, if the terminal emulator application were so coded, be a new "view" in a multiple-document interface (MDI).

107

For the purposes of Debian Policy, a "font for the X Window System" is one which is accessed via X protocol requests. Fonts for the Linux console, for PostScript renderer, or any other purpose, do not fit this definition. Any tool which makes such fonts available to the X Window System, however, must abide by this font policy.

108

This is because the X server may retrieve fonts from the local file system or over the network from an X font server; the Debian package system is empowered to deal only with the local file system.

109

Note that this mechanism is not the same as using app-defaults; app-defaults are tied to the client binary on the local file system, whereas X resources are stored in the X server and affect all connecting clients.

110

It is not very hard to write a man page. See the Man-Page-HOWTO, man(7), the examples created by dh_make, the helper program help2man, or the directory /usr/share/doc/man-db/examples.

111

Supporting this in man often requires unreasonable processing time to find a manual page or to report that none exists, and moves knowledge into man's database that would be better left in the file system. This support is therefore deprecated and will cease to be present in the future.

112

man will automatically detect whether UTF-8 is in use. In future, all manual pages will be required to use UTF-8.

113

At the time of writing, Chinese and Portuguese are the main languages with such differences, so pt_BR, zh_CN, and zh_TW are all allowed.

114

Normally, info documents are generated from Texinfo source. To include this information in the generated info document, if it is absent, add commands like:

     @dircategory Individual utilities
     @direntry
     * example: (example).               An example info directory entry.
     @end direntry

to the Texinfo source of the document and ensure that the info documents are rebuilt from source during the package build.

115

The system administrator should be able to delete files in /usr/share/doc/ without causing any programs to break.

116

Please note that this does not override the section on changelog files below, so the file /usr/share/doc/package/changelog.Debian.gz must refer to the changelog for the current version of package in question. In practice, this means that the sources of the target and the destination of the symlink must be the same (same source package and version).

117

At this phase of the transition, we no longer require a symbolic link in /usr/doc/. At a later point, policy shall change to make the symbolic links a bug.

118

The rationale: The important thing here is that HTML docs should be available in some package, not necessarily in the main binary package.

119

In particular, /usr/share/common-licenses/Apache-2.0, /usr/share/common-licenses/Artistic, /usr/share/common-licenses/GPL-1, /usr/share/common-licenses/GPL-2, /usr/share/common-licenses/GPL-3, /usr/share/common-licenses/LGPL-2, /usr/share/common-licenses/LGPL-2.1, /usr/share/common-licenses/LGPL-3, /usr/share/common-licenses/GFDL-1.2, and /usr/share/common-licenses/GFDL-1.3 respectively. The University of California BSD license is also included in base-files as /usr/share/common-licenses/BSD, but given the brevity of this license, its specificity to code whose copyright is held by the Regents of the University of California, and the frequency of minor wording changes, its text should be included in the copyright file rather than referencing this file.

120

Rationale: People should not have to look in places for upstream changelogs merely because they are given different names or are distributed in HTML format.

121

dpkg is targeted primarily at Debian, but may work on or be ported to other systems.

122

This is so that the control file which is produced has the right permissions

123

This is not currently detected when building source packages, but only when extracting them.

124

Hard links may be permitted at some point in the future, but would require a fair amount of work.

125

Setgid directories are allowed.

126

Renaming a file is not treated specially - it is seen as the removal of the old file (which generates a warning, but is otherwise ignored), and the creation of the new one.


Debian Policy Manual

version 3.9.6.1, 2014-11-22

The Debian Policy Mailing List