#! /bin/sh
set -e

VERSION="1.45"

# WARNING: This script is now replaced by ftpsync scripts:
# see https://www.debian.org/mirror/ftpmirror#how

# This script originates from https://www.debian.org/mirror/anonftpsync

# CVS: cvs.debian.org:/cvs/webwml - webwml/english/mirror/anonftpsync
# Version: $Id: anonftpsync,v 1.48 2014/08/28 21:11:09 spaillard Exp $ 

# Note: You MUST have rsync 2.6.4 or newer, which is available in sarge
# and all newer Debian releases, or at http://rsync.samba.org/

# Don't forget:
# chmod u+x anonftpsync

# Set the variables below to fit your site. You can then use cron to have
# this script run daily to automatically update your copy of the archive.

# TO is the destination for the base of the Debian mirror directory
# (the dir that holds dists/ and ls-lR).
# (mandatory)

TO=

# RSYNC_HOST is the site you have chosen from the mirrors file.
# (https://www.debian.org/mirror/list-full)
# (mandatory)

RSYNC_HOST=

# RSYNC_DIR is the directory given in the "Packages over rsync:" line of
# the mirrors file for the site you have chosen to mirror.
# (mandatory)

RSYNC_DIR=debian

# LOGDIR is the directory where the logs will be written to
# (mandatory)

LOGDIR=

# ARCH_EXCLUDE can be used to exclude a complete architecture from
# mirrorring. Please use as space seperated list.
# Possible values are:
# alpha amd64 arm arm64 armel hppa hurd-i386 i386 ia64 m68k mipsel mips powerpc
# ppc64 s390 sh sparc
#
# There is one special value: source
# This is not an architecture but will exclude all source code in /pool
#
# eg.
# ARCH_EXCLUDE="alpha arm armel hppa hurd-i386 ia64 m68k mipsel mips s390 sparc"
# 
# With a blank ARCH_EXCLUDE you will mirror all available architectures
# (optional)

ARCH_EXCLUDE=

# EXCLUDE is a list of parameters listing patterns that rsync will exclude, in
# addition to the architectures excluded by ARCH_EXCLUDE.
#
# Use ARCH_EXCLUDE to exclude specific architectures or all sources
#
# --exclude stable, testing, unstable options DON'T remove the packages of
# the given distribution. If you want do so, use debmirror instead.
#
# The following example would exclude mostly everything:
#EXCLUDE="\
#  --exclude stable/ --exclude testing/ --exclude unstable/ \
#  --exclude source/ \
#  --exclude *.orig.tar.gz --exclude *.diff.gz --exclude *.dsc \
#  --exclude /contrib/ --exclude /non-free/ \
# "

# With a blank EXCLUDE you will mirror the entire archive, except the
# architectures excluded by ARCH_EXCLUDE.
# (optional)

EXCLUDE=

# MAILTO is the address to send logfiles to;
# if it is not defined, no mail will be sent
# (optional)

MAILTO=

# LOCK_TIMEOUT is a timeout in minutes.  Defaults to 360 (6 hours).
# This program creates a lock to ensure that only one copy
# of it is mirroring any one archive at any one time.
# Locks held for longer than the timeout are broken, unless
# a running rsync process appears to be connected to $RSYNC_HOST.

LOCK_TIMEOUT=360

# You may establish the connection via a web proxy by setting the environment
# variable RSYNC_PROXY to a hostname:port pair pointing to your web proxy.  Note
# that your web proxy’s configuration must support proxy connections to port 873.
#
# RSYNC_PROXY="IP:PORT"
# export RSYNC_PROXY=$RSYNC_PROXY

# There should be no need to edit anything below this point, unless there
# are problems.

#-----------------------------------------------------------------------------#

# If you are accessing a rsync server/module which is password-protected,
# uncomment the following lines (and edit the other file).

# . ftpsync.conf
# export RSYNC_PASSWORD
# RSYNC_HOST=$RSYNC_USER@$RSYNC_HOST

#-----------------------------------------------------------------------------#

# Check for some environment variables
if [ -z "$TO" ] || [ -z "$RSYNC_HOST" ] || [ -z "$RSYNC_DIR" ] || [ -z "$LOGDIR" ]; then
	echo "One of the following variables seems to be empty:"
	echo "TO, RSYNC_HOST, RSYNC_DIR or LOGDIR"
	exit 2
fi

# Note: on some non-Debian systems, hostname doesn't accept -f option.
# If that's the case on your system, make sure hostname prints the full
# hostname, and remove the -f option. If there's no hostname command,
# explicitly replace `hostname -f` with the hostname.

HOSTNAME=`hostname -f`

# The hostname must match the "Site" field written in the list of mirrors.
# If hostname doesn't returns the correct value, fill and uncomment below 
# HOSTNAME=mirror.domain.tld
 
LOCK="${TO}/Archive-Update-in-Progress-${HOSTNAME}"

# The temp directory used by rsync --delay-updates is not
# world-readable remotely. It must be excluded to avoid errors. 
TMP_EXCLUDE="--exclude .~tmp~/"

# Exclude architectures defined in $ARCH_EXCLUDE
for ARCH in $ARCH_EXCLUDE; do
	EXCLUDE=$EXCLUDE"\
		--exclude binary-$ARCH/ \
		--exclude disks-$ARCH/ \
		--exclude installer-$ARCH/ \
		--exclude Contents-$ARCH.bz2 \
		--exclude Contents-$ARCH.gz \
		--exclude Contents-$ARCH.diff/ \
		--exclude arch-$ARCH.files \
		--exclude arch-$ARCH.list.gz \
		--exclude *_$ARCH.changes \
		--exclude *_$ARCH.deb \
		--exclude *_$ARCH.udeb "
	if [ "$ARCH" = "source" ]; then
		SOURCE_EXCLUDE="\
		--exclude source/ \
		--exclude *.tar.bz2 \
		--exclude *.diff.bz2 \
		--exclude *.tar.gz \
		--exclude *.diff.gz \
		--exclude *.dsc "
	fi
done

# Logfile
LOGFILE=$LOGDIR/debian-mirror.log
# optionally, use the rsync module name in the log file name:
# LOGFILE=$LOGDIR/$(echo $RSYNC_DIR | tr / _)-mirror.log
# LOGFILE=$LOGDIR/${RSYNC_DIR/\//_}-mirror.log

# Get in the right directory and set the umask to be group writable
# 
cd $HOME
umask 002

# If we are running mirror script for the first time, create the
# destination directory and the trace directory underneath it
if [ ! -d "${TO}/project/trace/" ]; then
  mkdir -p ${TO}/project/trace
fi

# Check to see if another sync is in progress
if [ -f "$LOCK" ]; then
# Note: this requires the findutils find; for other finds, adjust as necessary
  if [ "`find $LOCK -maxdepth 1 -cmin -$LOCK_TIMEOUT`" = "" ]; then
# Note: this requires the procps ps; for other ps', adjust as necessary
    if ps ax | grep '[r]'sync | grep -q $RSYNC_HOST; then
      echo "stale lock found, but a rsync is still running, aiee!"
      exit 1
    else
      echo "stale lock found (not accessed in the last $LOCK_TIMEOUT minutes), forcing update!"
      rm -f $LOCK
    fi
  else
    echo "current lock file exists, unable to start rsync!"
    exit 1
  fi
fi

touch $LOCK
# Note: on some non-Debian systems, trap doesn't accept "exit" as signal
# specification. If that's the case on your system, try using "0".
trap "rm -f $LOCK" exit

set +e

# First sync /pool
rsync --recursive --links --hard-links --times \
     --verbose \
     --timeout=3600 \
     $TMP_EXCLUDE $EXCLUDE $SOURCE_EXCLUDE \
     $RSYNC_HOST::$RSYNC_DIR/pool/ $TO/pool/ >> $LOGFILE 2>&1
result=$?

if [ "$result" = 0 ]; then
	# Now sync the remaining stuff
	rsync --recursive --links --hard-links --times \
	     --verbose \
	     --delay-updates --delete-after \
	     --timeout=3600 \
	     --exclude "Archive-Update-in-Progress-${HOSTNAME}" \
	     --exclude "project/trace/${HOSTNAME}" \
	     $TMP_EXCLUDE $EXCLUDE $SOURCE_EXCLUDE \
	     $RSYNC_HOST::$RSYNC_DIR/ $TO >> $LOGFILE 2>&1

	LANG=C date -u > "${TO}/project/trace/${HOSTNAME}"
	echo "Used anonftpsync version: ${VERSION}" >> "${TO}/project/trace/${HOSTNAME}"
	echo "Upstream-mirror: ${RSYNC_HOST}" >> "${TO}/project/trace/${HOSTNAME}"
	echo "Revision: i18n inRelease AUIP" >> "${TO}/project/trace/${HOSTNAME}"
else
	echo "ERROR: Help, something weird happened" | tee -a $LOGFILE
	echo "mirroring /pool exited with exitcode" $result | tee -a $LOGFILE
fi


if [ -n "$MAILTO" ]; then
	mail -s "debian archive synced" $MAILTO < $LOGFILE
fi

savelog $LOGFILE >/dev/null

rm $LOCK