After booting, you will be prompted to complete the configuration of
your basic system, and then to select what additional packages you
wish to install. The application which guides you through this
process is called
base-config. Its concept is
very similar to the
debian-installer from the first stage. Indeed,
base-config consists of a number of specialized
components, where each component handles one configuration task,
contains “hidden menu in the background” and also uses
the same navigation system.
If you wish to re-run the
base-config at any
point after installation is complete, as root run
After a welcome screen, you will be prompted to configure your time zone. First select whether the hardware clock of your system is set to local time or Greenwich Mean Time (GMT or UTC). The time displayed in the dialog may help you decide on the correct option.
Depending on the location selected at the beginning of the installation process, you will next be shown either a single timezone or a list of timezones relevant for that location. If a single timezone is shown, chooseto confirm or choose to select from the full list of timezones. If a list is shown, select your timezone from the list, or select Other for the full list.
The root account is also called the super-user; it is a login that bypasses all security protection on your system. The root account should only be used to perform system administration, and only used for as short a time as possible.
Any password you create should contain at least 6 characters, and should contain both upper- and lower-case characters, as well as punctuation characters. Take extra care when setting your root password, since it is such a powerful account. Avoid dictionary words or use of any personal information which could be guessed.
If anyone ever tells you they need your root password, be extremely wary. You should normally never give your root password out, unless you are administering a machine with more than one system administrator.
The system will ask you whether you wish to create an ordinary user account at this point. This account should be your main personal log-in. You should not use the root account for daily use or as your personal login.
Why not? Well, one reason to avoid using root's privileges is that it is very easy to do irreparable damage as root. Another reason is that you might be tricked into running a Trojan-horse program — that is a program that takes advantage of your super-user powers to compromise the security of your system behind your back. Any good book on Unix system administration will cover this topic in more detail — consider reading one if it is new to you.
You will first be prompted for the user's full name. Then you'll be asked for a name for the user account; generally your first name or something similar will suffice and indeed will be the default. Finally, you will be prompted for a password for this account.
If at any point after installation you would like to create another account, use the adduser command.
If no network was configured during the first stage of the installation, you will next be asked whether you wish to install the rest of the system using PPP. PPP is a protocol used to establish dialup connections with modems. If you configure the modem at this point, the installation system will be able to download additional packages or security updates from the Internet during the next steps of the installation. If you don't have a modem in your computer or if you prefer to configure your modem after the installation, you can skip this step.
In order to configure your PPP connection, you will need some information from your Internet Service Provider (ISP), including phone number, username, password and DNS servers (optional). Some ISPs provide installation guidelines for Linux distributions. You can use that information even if they don't specifically target Debian since most of the configuration parameters (and software) is similar amongst Linux distributions.
If you do choose to configure PPP at this point, a program named
pppconfig will be run. This program helps you
configure your PPP connection. Make sure, when it asks you
for the name of your dialup connection, that you name it
Hopefully, the pppconfig program will walk you through a trouble-free PPP connection setup. However, if it does not work for you, see below for detailed instructions.
In order to setup PPP, you'll need to know the basics of file viewing
and editing in GNU/Linux. To view files, you should use
more, and zmore for compressed
files with a
.gz extension. For example, to
README.debian.gz. The base system comes with an editor
named nano, which is very simple to use, but does
not have a lot of features. You will probably want to install more
full-featured editors and viewers later, such as
less, and emacs.
/etc/ppp/peers/provider and replace
# stands for the number of your serial
port. In Linux, serial ports are counted from 0; your first serial
/dev/ttyS0 under Linux.
The next step is to edit
/etc/chatscripts/provider and insert your
provider's phone number, your user-name and password. Please do not
delete the “\q” that precedes the password. It hides the
password from appearing in your log files.
Many providers use PAP or CHAP for login sequence instead of text mode
authentication. Others use both. If your provider requires PAP or
CHAP, you'll need to follow a different procedure. Comment out
everything below the dialing string (the one that starts with
/etc/ppp/peers/provider as described above, and
name stands for your user-name for the
provider you are trying to connect to. Next, edit
/etc/ppp/chap-secrets and enter your password
You will also need to edit
add your provider's name server (DNS) IP addresses. The lines in
/etc/resolv.conf are in the following format:
xs stand for numbers in your IP
address. Optionally, you could add the
usepeerdns option to the
/etc/ppp/peers/provider file, which will enable
automatic choosing of appropriate DNS servers, using settings the
remote host usually provides.
Unless your provider has a login sequence different from the majority of ISPs, you are done! Start the PPP connection by typing pon as root, and monitor the process using plog command. To disconnect, use poff, again, as root.
/usr/share/doc/ppp/README.Debian.gz file for
more information on using PPP on Debian.
For static SLIP connections, you will need to add the
slattach command (from the
net-tools package) into
/etc/init.d/network. Dynamic SLIP will require
PPPOE is a protocol related to PPP used for some broadband connections. There is currently no support in base configuration to help you set this up. However, the necessary software has been installed, which means you can configure PPPOE manually at this stage of the installation by switching to VT2 and running pppoeconf.
The main means that people use to install packages on their system is
via a program called apt-get, from the
Other front-ends for package management, like aptitude,
synaptic and the older dselect also
use and depend on apt-get. These front-ends are recommended
for new users, since they integrate some additional features (package
searching and status checks) in a nice user interface.
APT must be configured so that it knows where to retrieve packages from. The helper application which assists in this task is called apt-setup.
The next step in your configuration process is to tell APT where other
Debian packages can be found. Note that you can re-run this tool at
any point after installation by running apt-setup,
or by manually editing
If an official CD-ROM is in the drive at this point, then that CD-ROM should automatically be configured as an apt source without prompting. You will notice this because you will see the CD-ROM being scanned.
For users without an official CD-ROM, you will be offered an array of choices for how Debian packages are accessed: FTP, HTTP, CD-ROM, or a local file system.
You should know that it's perfectly acceptable to have a number of different APT sources, even for the same Debian archive. apt-get will automatically pick the package with the highest version number given all the available versions. Or, for instance, if you have both an HTTP and a CD-ROM APT source, apt-get should automatically use the local CD-ROM when possible, and only resort to HTTP if a newer version is available there. However, it is not a good idea to add unnecessary APT sources, since this will tend to slow down the process of checking the network archives for new versions.
If you plan on installing the rest of your system via the network, the
most common option is to select the
ftp source is also acceptable, but
tends to be somewhat slower making connections.
The next step during the configuration of network package sources is to tell apt-setup which country you live in. This configures which of the official Debian Internet mirrors you will connect to. Depending on which country you select, you will be presented with a list of possible servers. It's generally fine to pick the one at the top of the list, but any of them should work. Note however that the mirror list provided by the installation was generated when this version of Debian was released and some mirrors may no longer be available.
After you have selected a mirror, you will be asked if a proxy server should be used. A proxy server is a server that will forward all your HTTP and/or FTP requests to the Internet and is most often used to regulate and optimize access to the Internet on corporate networks. In some networks only the proxy server is allowed access to the Internet, in which case you will have to enter the name of the proxy server. You may also have to include an user name and password. Most home users will not need to specify a proxy server, although some ISPs may provide proxy servers for their users.
After you select a mirror, your new network package source will be tested. If all goes well, you will be prompted whether you want to add another package source. If you have any problems using the package source you selected, try using a different mirror (either from your country list or from the global list), or try using a different network package source.
Next you will be offered a number of pre-rolled software configurations offered by Debian. You could always choose, package by package, what you want to install on your new machine. This is the purpose of the aptitude program, described below. But this can be a long task with around 14700 packages available in Debian!
So, you have the ability to choose tasks first, and then add on more individual packages later. These tasks loosely represent a number of different jobs or things you want to do with your computer, such as “desktop environment”, “web server”, or “print server”. Section C.3, “Disk Space Needed for Tasks” lists the space requirements for the available tasks.
Once you've selected your tasks, select aptitude will install the packages you've selected.. At this point,
Even if you did not select any tasks at all, any standard,
important, or required priority packages that are not yet present on
your system will be installed. This functionality is the same as
tasksel -ris at the command line, and
a download of about 37M of archives. You will be shown the number of
packages to be installed, and how many kilobytes of packages, if any,
need to be downloaded.
If you do want to choose what to install on a package by package basis,
select the “manual package selection” option in
tasksel. If you select one or more tasks alongside
this option, aptitude will be called with the
--visual-preview option. This means you will be able to review the packages that are to be installed. If you do not select any
tasks, the normal aptitude screen will be displayed. After
making your selections you should press “
to start the download and installation of packages.
If you choose “manual package selection” without selecting any tasks, no packages will be installed by default. This means you can use this option if you want to install a minimal system, but also that the responsibility for selecting any packages not installed as part of the base system (before the reboot) that might be required for your system lies with you.
packages available in Debian, only
a small minority are covered by tasks offered in the Task Installer.
To see information on more packages, either use
search for some
given search string (see the apt-cache(8) man page), or run
aptitude as described below.
Aptitude is a modern program for managing packages. aptitude allows you to select individual packages, set of packages matching given criteria (for advanced users), or whole tasks.
The most basic keybindings are:
|Up, Down||Move selection up or down.|
|+||Mark package for installation.|
|-||Mark package for removal.|
|d||Show package dependencies.|
|g||Actually download/install/remove packages.|
|q||Quit current view.|
For more commands see the online help under the ? key.
Each package you selected with tasksel or aptitude is downloaded, unpacked and then installed in turn by the apt-get and dpkg programs. If a particular program needs more information from the user, it will prompt you during this process. You might also want to keep an eye on the output during the process, to watch for any installation errors (although you will be asked to acknowledge errors which prevented a package's installation).
Today, email is a very important part of many people's life, so it's no surprise Debian lets you configure your mail system right as a part of the installation process. The standard mail transport agent in Debian is exim4, which is relatively small, flexible, and easy to learn.
You may ask if this is needed even if your computer is not connected to any network. The short answer is: Yes. The longer explanation: Some system utilities (like cron, quota, aide, …) may send you important notices via email.
So on the first screen you will be presented with several common mail scenarios. Choose the one that most closely resembles your needs:
Your system is connected to a network and your mail is sent and received directly using SMTP. On the following screens you will be asked a few basic questions, like your machine's mail name, or a list of domains for which you accept or relay mail.
In this scenario is your outgoing mail forwarded to another machine, called a “smarthost”, which does the actual job for you. Smarthost also usually stores incoming mail addressed to your computer, so you don't need to be permanently online. That also means you have to download your mail from the smarthost via programs like fetchmail. This option is suitable for dial-up users.
Your system is not on a network and mail is sent or received only between local users. Even if you don't plan to send any messages, this option is highly recommended, because some system utilities may send you various alerts from time to time (e.g. beloved “Disk quota exceeded”). This option is also convenient for new users, because it doesn't ask any further questions.
Choose this if you are absolutely convinced you know what you are doing. This will leave you with an unconfigured mail system — until you configure it, you won't be able to send or receive any mail and you may miss some important messages from your system utilities.
If none of these scenarios suits your needs, or if you need a finer
setup, you will need to edit configuration files under the
/etc/exim4 directory after the installation is
complete. More information about exim4 may be found
 Note that the actual program that installs packages is called dpkg. However, this package is more of a low-level tool. apt-get is a higher-level tool as it will invoke dpkg as appropriate and also because it knows to install other packages which are required for the package you're trying to install, as well as how to retrieve the package from your CD, the network, or wherever.
You should know that to present this list,
base-config is merely invoking the
tasksel program. For manual package
aptitude program is being run. Any of these can be
run at any time after installation to install (or remove) more
packages. If you are looking for a specific single package, after
installation is complete, simply run
package is the name of the package you are
 You can also change the default selections. If you would like to select any additional package, use -> .