To find the nearest (and thus probably the fastest) mirror, see the list of Debian mirrors.
When downloading files from a Debian mirror using FTP, be sure to download the files in binary mode, not text or automatic mode.
The installation images are located on each Debian mirror in the directory debian/dists/jessie/main/installer-armhf/current/images/ — the MANIFEST lists each image and its purpose.
The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install Debian. These images can be obtained from .../images/orion5x/network-console/buffalo/kuroboxpro .
A firmware image is provided for the HP mv2120 which will automatically
debian-installer. This image can be installed
with uphpmvault on Linux and other systems and with the HP Media
Vault Firmware Recovery Utility on Windows. The firmware image can be
The installation files for the QNAP Turbo Station consist of a kernel and ramdisk as well as a script to write these images to flash. You can obtain the installation files for QNAP TS-11x, TS-21x and TS-41x models from .../images/kirkwood/network-console/qnap/ .
The installation files for plug computers (SheevaPlug, GuruPlug, DreamPlug etc) and OpenRD devices consist of a kernel and initrd for U-Boot. You can obtain these files from .../images/kirkwood/netboot/marvell/ .
The installation files for LaCie NASes (Network Space v2, Network Space Max v2, Internet Space v2, d2 Network v2, 2Big Network v2 and 5Big Network v2) consist of a kernel and initrd for U-Boot. You can obtain these files from .../images/kirkwood/network-console/lacie/ .
The installation files for systems supported by the armhf multiplatform kernel (see Section 188.8.131.52, “Platforms supported by Debian/armhf”) consist of a standard Linux kernel image, a standard Linux initial ramdisk image and a system-specific device-tree blob. The kernel and the initial ramdisk image can be obtained from .../images/armmp/netboot/ and the device-tree blob can be obtained from .../images/armmp/device-tree/ .