This section will walk you through pre-installation hardware setup, if any, that you will need to do prior to installing Debian. Generally, this involves checking and possibly changing BIOS/system firmware settings for your system. The “BIOS” or “system firmware” is the core software used by the hardware; it is most critically invoked during the bootstrap process (after power-up).
The BIOS provides the basic functions needed to boot your machine and to allow your operating system to access your hardware. Your system provides a BIOS setup menu, which is used to configure the BIOS. To enter the BIOS setup menu you have to press a key or key combination after turning on the computer. Often it is the Delete or the F2 key, but some manufacturers use other keys. Usually upon starting the computer there will be a message stating which key to press to enter the setup screen.
Within the BIOS setup menu, you can select which devices shall be checked in which sequence for a bootable operating system. Possible choices usually include the internal harddisks, the CD/DVD-ROM drive and USB mass storage devices such as USB sticks or external USB harddisks. On modern systems there is also often a possibility to enable network booting via PXE.
Depending on the installation media (CD/DVD ROM, USB stick, network boot) you have chosen you should enable the appropriate boot devices if they are not already enabled.
Most BIOS versions allow to call up a boot menu on system startup in which you select from which device the computer should start for the current session. If this option is available, the BIOS usually displays a short message like “press F12 for boot menu” on system startup. The actual key used to select this menu varies from system to system; commonly used keys are F12, F11 and F8. Choosing a device from this menu does not change the default boot order of the BIOS, i.e. you can start once from a USB stick while having configured the internal harddisk as the normal primary boot device.
If your BIOS does not provide you with a boot menu to do ad-hoc choices
of the current boot device, you have to change your BIOS setup to make
the device from which the
debian-installer shall be booted the primary boot device.
Unfortunately some computers contain buggy BIOS versions. Booting
a USB stick might not work even if there is an appropriate option in the
BIOS setup menu and the stick is selected as the primary boot device. On
some of these systems using a USB stick as boot medium is impossible; others
can be tricked into booting from the stick by changing the device type in
the BIOS setup from the default “USB harddisk” or “USB
stick” to “USB ZIP” or “USB CDROM”.
If you cannot manipulate the BIOS to boot directly from a USB stick you
still have the option of using an ISO copied to the stick. Boot
using Section 4.4, “Preparing Files for Hard Disk Booting” and, after scanning the hard
drives for an installer ISO image, select the USB device and choose an