Product SiteDocumentation Site

15.2. بناء حزمتك الأولى

15.2.1. الحزم الفوقية أو الحزم الزائفة

تتشابه الحزم الزائفة (fake packages) مع الحزم الفوقية (meta-packages) من ناحية أن كلاً منها عبارة عن قواقع فارغة تستخدم فقط للاستفادة من تأثير بياناتها الفوقية على عملية معالجة الحزم.
The purpose of a fake package is to trick dpkg and apt into believing that some package is installed even though it is only an empty shell. This allows satisfying dependencies on a package when the corresponding software was installed outside the scope of the packaging system. Such a method works, but it should still be avoided whenever possible, since there is no guarantee that the manually installed software behaves exactly like the corresponding package would and other packages depending on it would not work properly.
من ناحية اخرى، تُمثّل الحزمة الفوقية مجموعة اعتماديات غالباً، حيث ينتج عن تثبيت الحزمة الفوقية تثبيت مجموعة من الحزم الأخرى بنقلة واحدة.
يمكن إنشاء هذين النوعين من الحزم باستخدام الأمرين equivs-control وequivs-build (من الحزمة equivs)، ينشئ الأمر equivs-control ملف ترويسة حزمة دبيان يجب تعديله حتى يحوي اسم الحزمة المنشأة، ورقم إصدارها، واسم مشرفها، واعتمادياتها، ووصفها. الحقول الأخرى التي لا تملك قيماً افتراضية ليست إلزامية ويمكن حذفها. الحقول Copyright وChangelog وReadme وExtra-Files ليست حقولاً معيارية في في حزم دبيان؛ لا معنى لهذه الحقول خارج نطاق equivs-build، وسوف تُحذَف من ترويسات الحزم المولّدة.

مثال 15.2. ملف ترويسة الحزمة الزائفة libxml-libxml-perl

Section: perl
Priority: optional
Standards-Version: 4.5.1

Package: libxml-libxml-perl
Version: 2.0207-1
Maintainer: Raphael Hertzog <hertzog@debian.org>
Depends: libxml2 (>= 2.9.10)
Architecture: all
Description: Fake package - module manually installed in site_perl
 This is a fake package to let the packaging system
 believe that this Debian package is installed.
 .
 In fact, the package is not installed since a newer version
 of the module has been manually compiled &amp; installed in the
 site_perl directory.
الخطوة التالية هي توليد حزمة دبيان باستخدام الأمر equivs-build file. تهانينا: أُنشِئَت الحزمة في المجلد الحالي ويمكن التعامل معها مثل أي حزمة دبيان أخرى.
$ equivs-build file
equivs-build control 
dpkg-buildpackage: info: source package libxml-libxml-perl
dpkg-buildpackage: info: source version 2.0207-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Raphael Hertzog <hertzog@debian.org>
dpkg-buildpackage: info: host architecture amd64
 dpkg-source --before-build .
 debian/rules clean
dh clean
   dh_clean
 debian/rules binary
dh binary
   dh_update_autotools_config
   dh_autoreconf
   create-stamp debian/debhelper-build-stamp
   dh_prep
   dh_install
   dh_installdocs
   dh_installchangelogs
   dh_perl
   dh_link
   dh_strip_nondeterminism
   dh_compress
   dh_fixperms
   dh_missing
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'libxml-libxml-perl' in '../libxml-libxml-perl_2.0207-1_all.deb'.
 dpkg-genbuildinfo --build=binary
 dpkg-genchanges --build=binary >../libxml-libxml-perl_2.0207-1_amd64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)

The package has been created.
Attention, the package has been created in the current directory,
not in ".." as indicated by the messaige above!

15.2.2. أرشيف ملفات بسيط

يحتاج مديرو النظم في شركة فلكوت إنشاء حزمة دبيان لتسهيل نشر مجموعة مستندات على عدد كبير من الأجهزة. بدأ مدير النظم المسؤول عن هذه المهمة بقراءة ”New Maintainer's Guide“ (دليل المشرف الجديد)، ثم شرع يعمل على حزمته الأولى.
الخطوة الأولى هي إنشاء مجلد بالاسم falcot-data-1.0 لتخزين الحزمة المصدرية. سوف تُسمّى الحزمة ‒منطقياً‒ falcot-data وستحمل رقم الإصدار 1.0. بعدها يضع مدير النظام المستندات في المجلد الفرعي data. ثم يستدعي الأمر dh_make (من الحزمة dh-make) لإضافة الملفات اللازمة لعملية توليد الحزمة، التي ستحفظ جميعاً في المجلد الفرعي debian:
$ cd falcot-data-1.0
$ dh_make --native

Type of package: (single, indep, library, python)
[s/i/l/p]? i

Maintainer Name     : Raphael Hertzog
Email-Address       : hertzog@debian.org
Date                : Sat, 26 Feb 2021 13:02:06 +0100
Package Name        : falcot-data
Version             : 1.0
License             : gpl3
Package Type        : indep
Are the details correct? [Y/n/q]
Currently there is not top level Makefile. This may require additional tuning
Done. Please edit the files in the debian/ subdirectory now.

$
The selected type of package (indep) indicates that this source package will generate a single binary package that can be shared across all architectures (Architecture: all in debian/control). single acts as a counterpart, and leads to a single binary package that is dependent on the target architecture (Architecture: any). In this case, the former choice is more relevant since the package only contains documents and no binary programs, so it can be used similarly on computers of all architectures.
The library type corresponds to a source package leading to several binary packages. It is useful for shared libraries, since they need to follow strict packaging rules.
The dh_make command created a debian subdirectory with many files. Some are required, in particular rules, control, changelog and copyright. Files with the .ex extension are example files that can be used by modifying them (and removing the extension) when appropriate. When they are not needed, removing them is recommended. The compat file is not used nor created anymore. Instead of defining the debhelper compatibility level as a number in this file, it is now defined as a build-dependency on the debhelper-compat virtual package in the Build-Depends file in debian/control.
The copyright file must contain information about the authors of the documents included in the package, and the related copyright and license. In our case, these are internal documents and their use is restricted to within the Falcot Corp company. The default format used for this file is defined in the Format field.
The default changelog file is generally appropriate; replacing the “Initial release” with a more verbose explanation and changing the distribution from UNRELEASED or unstable to the target release name is enough.
The control file must also be updated: the Section field can be changed to misc and the Homepage, Vcs-Git and Vcs-Browser fields were removed. The Depends fields was completed with firefox-esr | www-browser so as to ensure the availability of a web browser able to display the documents in the package. If the package does not require to run any commands as root (see أدوات fakeroot), the Rules-Requires-Root field can be left as is.

مثال 15.3. ملف control

Source: falcot-data
Section: misc
Priority: optional
Maintainer: Raphael Hertzog <hertzog@debian.org>
Build-Depends: debhelper-compat (= 13)
Standards-Version: 4.5.1
Rules-Requires-Root: no

Package: falcot-data
Architecture: all
Depends: firefox-esr | www-browser, ${misc:Depends}
Description: Internal Falcot Corp Documentation
 This package provides several documents describing the internal
 structure at Falcot Corp.  This includes:
  - organization diagram
  - contacts for each department.
 .
 These documents MUST NOT leave the company.
 Their use is INTERNAL ONLY.

مثال 15.4. ملف changelog

falcot-data (1.0) bullseye; urgency=low

  * Initial Release.
  * Let's start with few documents:
    - internal company structure;
    - contacts for each department.

 -- Raphael Hertzog <hertzog@debian.org>  Sat, 26 Feb 2022 15:12:06 +0100

مثال 15.5. ملف copyright

Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: falcot-data

Files: *
Copyright: 2004-2021 Falcot Corp
License:
 All rights reserved.
يجوي الملف rules عادة مجموعة قواعد تستخدم لضبط وبناء وتثبيت البرنامج في مجلد فرعي مخصص (يسمى حسب اسم الحزمة الثنائية). بعدها تؤرشف محتويات هذا المجلد الفرعي في حزمة دبيان كما لو كانت جذر نظام الملفات. في حالتنا، سوف تثبت الملفات في المجلد الفرعي debian/falcot-data/usr/share/falcot-data/، حتى يؤدي تثبيت الحزمة المولّدة لنشر الملفات في /usr/share/falcot-data/. يستخدم الملف rules كملف Makefile فيه بضعة أهداف قياسية (منها clean الذي يستخدم لتنظيف المجلد المصدر، وbinary الذي يستخدم لتوليد الحزمة الثنائية).
رغم أن هذا الملف هو لبُّ العملية، إلا أنه لم يعد يحوي إلا القليل اللازم لاستدعاء مجموعة قياسية من الأوامر التي توفرها الأداة debhelper. وهذه هي حالة الملفات التي يولدها dh_make. لتثبيت ملفاتنا، علينا فقط ضبط سلوك الأمر dh_install عبر إنشاء ملف debian/falcot-data.install التالي:
data/* usr/share/falcot-data/
At this point, the package can be created. We will, however, add a lick of paint. Since the administrators want the documents to be easily accessed from the menus of graphical desktop environments, we add a falcot-data.desktop file and get it installed in /usr/share/applications by adding a second line to debian/falcot-data.install.

مثال 15.6. ملف falcot-data.desktop

[Desktop Entry]
Name=Internal Falcot Corp Documentation
Comment=Starts a browser to read the documentation
Exec=x-www-browser /usr/share/falcot-data/index.html
Terminal=false
Type=Application
Categories=Documentation;
الملف debian/falcot-data.install كما يبدو بعد تحديثه:
data/* usr/share/falcot-data/
falcot-data.desktop usr/share/applications/
Our source package is now ready. All that is left to do is to generate the binary package, with the same method we used previously for rebuilding packages: we run the dpkg-buildpackage -us -uc command from within the falcot-data-1.0 directory.