To prepare the USB stick, we recommend to use a system where GNU/Linux is
already running and where USB is supported. With current GNU/Linux systems
the USB stick should be automatically recognized when you insert it. If
it is not you should check that the usb-storage kernel module is loaded.
When the USB stick is inserted, it will be mapped to a device named
/dev/sdX, where the “X” is a letter
in the range a-z. You should be able to see to which device the USB
stick was mapped by running the command lsblk before
and after inserting it. (The output of dmesg (as root) is
another possible method for that.)
To write to your stick, you may have to turn off its write
The procedures described in this section will destroy anything already on the device! Make very sure that you use the correct device name for your USB stick. If you use the wrong device the result could be that all information on, for example, a hard disk is lost.
Debian installation images for this architecture are created using the isohybrid technology; that means they can be written directly to a USB stick, which is a very easy way to make an installation media. Simply choose an image (such as the netinst, CD or DVD-1) that will fit on your USB stick. See Section 4.1, “Official Debian GNU/Linux installation images” to get an installation image.
The installation image you choose should be written directly to the USB stick, overwriting its current contents. For example, when using an existing GNU/Linux system, the image file can be written to a USB stick as follows, after having made sure that the stick is unmounted:
Simply writing the installation image to USB like this should work fine for most users. For special needs there is this wiki page.
Information about how to do this on other operating systems can be found in the Debian CD FAQ.
The image must be written to the whole-disk device and not a partition, e.g. /dev/sdb and not /dev/sdb1. Do not use tools like unetbootin which alter the image.