4.3. USB メモリでの起動用ファイルの準備

To prepare the USB stick, we recommend to use a system where GNU/Linux is already running and where USB is supported. With current GNU/Linux systems the USB stick should be automatically recognized when you insert it. If it is not you should check that the usb-storage kernel module is loaded. When the USB stick is inserted, it will be mapped to a device named /dev/sdX, where the X is a letter in the range a-z. You should be able to see to which device the USB stick was mapped by running the command lsblk before and after inserting it. (The output of dmesg (as root) is another possible method for that.) To write to your stick, you may have to turn off its write protection switch.

[警告] 警告

The procedures described in this section will destroy anything already on the device! Make very sure that you use the correct device name for your USB stick. If you use the wrong device the result could be that all information on, for example, a hard disk is lost.

4.3.1. ハイブリッド CD/DVD イメージを使った USB メモリの準備

Debian installation images for this architecture are created using the isohybrid technology; that means they can be written directly to a USB stick, which is a very easy way to make an installation media. Simply choose an image (such as the netinst, CD or DVD-1) that will fit on your USB stick. See 「公式 Debian GNU/Linux インストールイメージ」 to get an installation image.

別の方法として、とても小さな、サイズが数メガしかない USB メモリ用に、netboot ディレクトリから mini.iso をダウンロードできます (場所については 「どこでインストールファイルを探すか」 に記載があります)。

選択したインストールイメージは、既存の内容を上書きして、直接 USB メモリに書き込む必要があります。例えば、既存の GNU/Linux システムを使っている場合、以下のようにしてイメージファイルを USB メモリに書き込めます。完了したら、確実にアンマウントしてください。

# cp debian.iso /dev/sdX
# sync

他のオペレーティングシステムでのやり方については、Debian CD FAQ で確認できます。

[重要] 重要

イメージはパーティションではなくディスクデバイス全体を指定する必要があります。例えば /dev/sdb1 ではなく /dev/sdb となります。イメージの書き換える unetbootin のようなツールは使わないでください。

[重要] 重要

ほとんどのユーザは、インストールイメージを単にUSBメモリに書き込むだけでうまく行くでしょう。下記の選択肢はもっと複雑なので、主に特殊なニーズがあるユーザ向けです。

USB メモリに配置したハイブリッドイメージは、ストレージの領域すべてを専有するわけではありません。そのため、ファームウェアファイルやパッケージ、その他選んだファイルを保持するために、空き領域を使用するのを、検討する価値があるかもしれません。あなたが、ひとつしか USB メモリを持っていないか、ひとつのデバイスにすべて格納する必要があるときに便利です。

To do so, use cfdisk or any other partitioning tool to create an additional partition on the stick. Then create a (FAT) filesystem on the partition, mount it and copy or unpack the firmware onto it, for example with:

# mkdosfs -n FIRMWARE /dev/sdX3
# mount /dev/sdX3 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt

Take care that you use the correct device name for your USB stick. The mkdosfs command is contained in the dosfstools Debian package.

[注記] 注記

If you have chosen the mini.iso to be written to the USB stick, the second partition doesn't have to be created, as - very nicely - it will already be present. Unplugging and replugging the USB stick should make the two partitions visible.