Re: Linux/m68k on Atari
Hi,
> OK, I was able to setup debug through serial console, using
> $ minicom -o -c on
> and adding
> debug=ser console=tty0 console=ttyS0,9600n8
> in kernel command line
FWIW, it should be console=ttyS1,9600n8 (the modem port is ttyS1). With
debug=ser, this does not matter.
> [ 0.000000] atari_stram pool, start=00373210, end=003f320f
This patch actually never made it into Geert's tree. Bummer.
Anyway: do you have a section like this in your log?
Ignoring memory chunk at 0x0:0xe00000 before the first chunk
Fix your bootloader or use a memfile to make use of this area!
The whole of ST-RAM is being ignored (2.6.29). No wonder there's no suitable RAM
for atafb. How do I use a memfile with ataboot?
Messages like
scsi: On host 0 channel 0 id 5 only 511 (max_scsi_report_luns) of 201703552 lun.
spell all sorts of trouble with stuff needing DMA memory. Yikes.
Michael
Reply to: