Re: install Etch with raid level 10
On Wednesday 26 September 2007 11:53, Gilles Mocellin wrote:
> Le Wednesday 26 September 2007 16:48:14 Scott Lair, vous avez écrit :
> > Dave Ewart wrote:
>
> [...]
>
> > > Normally, one makes a RAID-10 software setup as follows:
> > >
> > > mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sd[ab]1
> > > mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/sd[cd]1
> > > mdadm --create /dev/md2 --level=0 --raid-devices=2 /dev/md[01]
>
> [...]
>
> > I've got some time to mess with it for a while and I'll post
> > back the results.
> >
> > thanks,
> >
> > scott
>
> Instead of having md over md device, I suggest to do stripped LVM over RAID
> 1. And it is supported during installation !
Damn! That's a good idea. I'm kicking myself for not thinking of that.
cmr
--
Debian 'Etch' - Registered Linux User #241964
--------
"More laws, less justice." -- Marcus Tullius Ciceroca, 42 BC
Reply to: