RE: SS4000E Fan speed, LEDS and power button
I wonder if you could expand on how you built the 3.4 kernel? I've not
succeeded to define a kernel config that will create a bootable kernel and
launch the debian installer as the does the kernel at
http://d-i.debian.org/daily-images/armel/daily/iop32x/netboot/ss4000e/.
-cjw-
-----Original Message-----
From: Arnaud Patard (Rtp) [mailto:arnaud.patard@rtp-net.org]
Sent: Tuesday, July 17, 2012 3:44 PM
To: Chris Wilkinson
Cc: debian-arm@lists.debian.org
Subject: Re: SS4000E Fan speed, LEDS and power button
"Chris Wilkinson" <kinsham@verizon.net> writes:
Please note that I'm about to talk about em7210 so things may be different
on em7220.
> Has anyone succeeded to control the fan speed according to
> temperature,
the fan is handled by a w83792*.
> control the front panel LEDS and power off with the power button on
> this device?
The leds are handled by the f75111 chip from fintek. There's a driver here
http://git.rtp-net.org/?p=ss4000e.git;a=tree The needed patches are :
f75111.patch
add_f75111_pdata.patch
em7210_add_missing_leds.patch
I'm using them on top of 3.4 for several weeks now.
For the buttons, there's em7210_add_gpio_keys.patch. It was relying on
custom gpio input driver but there's nowadays needed stuff in mainline.
>
> I built http://lm-sensors.org/ but it couldn't recognize any sensors.
>
> I also haven't been able to figure out how to set up 4 disks in a
> RAID5. The d-I only prompted to install 1 disk. I can format/mount the
> other 3 and but don't know how to create the 4-disk RAID.
RAID5 needs only 3 drives, so create the RAID5 on 3 drives and then add the
last one as spare.
Arnaud
--
To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Archive: http://lists.debian.org/871ukacgwj.fsf@lebrac.rtp-net.org
Reply to: