Package: installation-reports Boot method: USB stick Image version: buster d-i RC1 amd64 netinst https://cdimage.debian.org/cdimage/buster_di_rc1/amd64/iso-cd/debian-buster-DI-rc1-amd64-netinst.iso Date: 2019-04-22 Machine: HP Mini 210 Processor: Intel(R) Atom(TM) CPU N450 Memory: 2 GiB Partitions: [lsblk -i] NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk |-sda1 8:1 0 285M 0 part /boot |-sda2 8:2 0 186.3G 0 part | `-sda2_crypt 254:0 0 186.3G 0 crypt | `-XXXXX-root 254:1 0 23.3G 0 lvm / |-sda3 8:3 0 7.5G 0 part | `-sda3_crypt 254:2 0 7.5G 0 crypt [SWAP] |-sda4 8:4 0 1K 0 part `-sda5 8:5 0 160G 0 part `-XXXXXhome-enchome 254:3 0 158.4G 0 lvm `-_dev_dm_3 254:4 0 158.4G 0 crypt /home [where XXXXX is the hostname; sda4/sda5/XXXXXhome etc were added after booting into the installed system, and use libpam-mount; all the other partitioning, encryption, and LVM was set up in d-i] Output of lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [103c:3660] 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [103c:3660] Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] Subsystem: Hewlett-Packard Company Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [103c:3660] 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family High Definition Audio Controller [103c:3660] Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller [103c:3660] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller [103c:3660] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller [103c:3660] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB UHCI Controller [103c:3660] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family USB2 EHCI Controller [103c:3660] Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Hewlett-Packard Company NM10 Family LPC Controller [103c:3660] Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family SATA Controller [AHCI mode] [103c:3660] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Hewlett-Packard Company NM10/ICH7 Family SMBus Controller [103c:3660] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 02) Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller [103c:3660] Kernel driver in use: r8169 Kernel modules: r8169 02:00.0 Network controller [0280]: Broadcom Limited BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Hewlett-Packard Company BCM4312 802.11b/g LP-PHY [103c:365e] Kernel driver in use: b43-pci-bridge Kernel modules: ssb Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: My biggest problem: my touchpad didn't work at all in the graphical installer; the mouse pointer is stuck in the centre of the screen and doesn't respond to movement on the touchpad. It works in the installed system, out of the box; I'm using Xfce4. I think it's a Synaptics sort of a device, but I'm a bit unclear on the details. Hopefully the attached files give enough detail. As a result, I couldn't take any screenshots (since the "Screenshot" button doesn't seem to be in the tab order, and I didn't find a keyboard shortcut for it). I ended up recording my installation with a camera. I was able to achieve everything else I wanted to do with the keyboard, though. I installed over a wired Ethernet connection, so I didn't try to use non-free b43 WiFi drivers in the installer. This was an install onto a new, blank SSD, but I changed my mind a lot about my partition and encryption layout; on my first d-i session I managed to get the partition/LVM/crypt system stuck in a state where I couldn't make certain changes (I think I wanted to trash an encrypted volume and start again or something); I had to reboot the installer to achieve what I wanted. Unfortunately I don't have good records of the exact steps I took, so this is probably not an actionable bug report. In the end, the installation was successful. Attached some files from /var/log/installer, lightly redacted. (These are from the final d-i session, so the installer finds traces of the previous partition attempt.)
Attachment:
hardware-summary.xz
Description: application/xz
Attachment:
syslog.xz
Description: application/xz
Attachment:
Xorg.0.log.xz
Description: application/xz