[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1033921: debian-installer: Weekly build of d-i fails to find ipw2x00 firmware package



Package: debian-installer
Severity: normal
Tags: d-i
X-Debbugs-Cc: charlescurley@charlescurley.com

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

Once again I pulled in the weekly d-i netinst ISO and tried it on my IBM R51. This i386 machine uses the Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05), which requires the ipw 2200 firmware.

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

I ran my usual preseed file, which is set up to use the wifi network for Internet access.

   * What was the outcome of this action?

I only saw the Ethernet interface as an option. That works.

Grepping in the syslog indicates that the installer is looking in the wrong place on the CD-ROM.

At approximately 21:50:11 syslog reports that

check-missing-firmware: installing firmware package /cdrom/firmware/firmware-ipw2x00_20230210-4_all.deb

However, searching the CD-ROM indicates that the firmware package is elsewhere:

root@hawk:/crc/isos/debian/12.x/weekly# mkdir loop
root@hawk:/crc/isos/debian/12.x/weekly# mount debian-testing-i386-netinst.iso loop
mount: /crc/isos/debian/12.x/weekly/loop: WARNING: source write-protected, mounted read-only.
root@hawk:/crc/isos/debian/12.x/weekly# grep ipw loop/md5sum.txt 
7e6f43f1dd1ec551f5eed63652f35ff0  ./firmware/dep11/firmware-ipw2x00.component
e6eb2bebabf6d793ebd5ebe958461cde  ./firmware/dep11/firmware-ipw2x00.patterns
8ff7cc60a37ed026c84613021cd4eb05  ./pool/non-free-firmware/f/firmware-nonfree/firmware-ipw2x00_20230210-4_all.deb
root@hawk:/crc/isos/debian/12.x/weekly# ll loop/pool/non-free-firmware/f/firmware-nonfree/firmware-ipw2x00_20230210-4_all.deb 
-r--r--r-- 2 root root 279224 Mar 11 14:40 loop/pool/non-free-firmware/f/firmware-nonfree/firmware-ipw2x00_20230210-4_all.deb
root@hawk:/crc/isos/debian/12.x/weekly# 


   * What outcome did you expect instead?

Successful log in to the wifi network.
#_preseed_V1

#### From https://www.debian.org/releases/buster/example-preseed.txt
#### and other places.

debconf debconf/priority string critical

#### Contents of the preconfiguration file (for buster)
### Localization
# Preseeding only locale sets language, country and locale.
# d-i debian-installer/locale string en_US
d-i debian-installer/locale string en_US.UTF-8

# The values can also be preseeded individually for greater flexibility.
#d-i debian-installer/language string en
#d-i debian-installer/country string NL
d-i debian-installer/language string en
d-i debian-installer/country string US
#d-i debian-installer/locale string en_GB.UTF-8
# Optionally specify additional locales to be generated.
#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8

# Keyboard selection.
d-i keyboard-configuration/xkb-keymap select us
# d-i keyboard-configuration/toggle select No toggling

### Description: Keyboard layout:
#   Please select the layout matching the keyboard for this machine.
d-i keyboard-configuration/variant select English (US)
# Possible choices: ${CHOICES}

### Description: Compose key:
#   The Compose key (known also as Multi_key) causes the computer to interpret
#   the next few keystrokes as a combination in order to produce a character
#   not found on the keyboard.
#   .
#   On the text console the Compose key does not work in Unicode mode. If not
#   in Unicode mode, regardless of what you choose here, you can always also
#   use the Control+period combination as a Compose key.
# d-i keyboard-configuration/compose select No compose key
d-i keyboard-configuration/compose select Left Logo key
# Possible choices: No compose key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Logo key, Caps Lock


### Network configuration
# Disable network configuration entirely. This is useful for cdrom
# installations on non-networked devices where the network questions,
# warning and long timeouts are a nuisance.
#d-i netcfg/enable boolean false

### Description: Auto-configure networking?
#   Networking can be configured either by entering all the information
#   manually, or by using DHCP (or a variety of IPv6-specific methods) to
#   detect network settings automatically. If you choose to use
#   autoconfiguration and the installer is unable to get a working
#   configuration from the network, you will be given the opportunity to
#   configure the network manually.
d-i netcfg/use_autoconfig boolean true

# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
#d-i netcfg/choose_interface select auto

# To pick a particular interface instead:
#d-i netcfg/choose_interface select eth1

# To set a different link detection timeout (default is 3 seconds).
# Values are interpreted as seconds.
d-i netcfg/link_wait_timeout string 4

# If you have a slow dhcp server and the installer times out waiting for
# it, this might be useful.
#d-i netcfg/dhcp_timeout string 60
#d-i netcfg/dhcpv6_timeout string 60
d-i netcfg/dhcp_timeout string 30
d-i netcfg/dhcpv6_timeout string 6

# If you prefer to configure the network manually, uncomment this line and
# the static network configuration below.
#d-i netcfg/disable_autoconfig boolean true

# If you want the preconfiguration file to work on systems both with and
# without a dhcp server, uncomment these lines and the static network
# configuration below.
#d-i netcfg/dhcp_failed note
#d-i netcfg/dhcp_options select Configure network manually

# Static network configuration.
#
# IPv4 example
#d-i netcfg/get_ipaddress string 192.168.1.42
#d-i netcfg/get_netmask string 255.255.255.0
#d-i netcfg/get_gateway string 192.168.1.1
#d-i netcfg/get_nameservers string 192.168.1.1
#d-i netcfg/confirm_static boolean true
#
# IPv6 example
#d-i netcfg/get_ipaddress string fc00::2
#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
#d-i netcfg/get_gateway string fc00::1
#d-i netcfg/get_nameservers string fc00::1
#d-i netcfg/confirm_static boolean true

# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
# d-i netcfg/get_hostname string unassigned-hostname

# If you want to force a hostname, regardless of what either the DHCP
# server returns or what the reverse DNS entry for the IP is, uncomment
# and adjust the following line.
#d-i netcfg/hostname string somehost

# Disable that annoying WEP key dialog.
# d-i netcfg/wireless_wep string
# The wacky dhcp hostname that some ISPs use as a password of sorts.
#d-i netcfg/dhcp_hostname string radish

# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# change to false to disable asking.
d-i hw-detect/load_firmware boolean true

### Network console
# Use the following settings if you wish to make use of the network-console
# component for remote installation over SSH. This only makes sense if you
# intend to perform the remainder of the installation manually.
#d-i anna/choose_modules string network-console
#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
#d-i network-console/password password r00tme
#d-i network-console/password-again password r00tme

### Mirror settings
# If you select ftp, the mirror/country string does not need to be set.
#d-i mirror/protocol string ftp
d-i mirror/country string manual
# d-i mirror/http/hostname string http.us.debian.org
d-i mirror/http/hostname string deb.debian.org
d-i mirror/http/directory string /debian
# d-i mirror/http/proxy string
d-i mirror/http/proxy string http://aptcacher.localdomain:3142/

# Suite to install.
#d-i mirror/suite string testing
# Suite to use for loading installer components (optional).
#d-i mirror/udeb/suite string testing

### Account setup
# Skip creation of a root account (normal user account will be able to
# use sudo).
#d-i passwd/root-login boolean false
d-i passwd/root-login boolean true
# Alternatively, to skip creation of a normal user account.
#d-i passwd/make-user boolean false
d-i passwd/make-user boolean true

# Root password, either in clear text
# d-i passwd/root-password password r00tme
# d-i passwd/root-password-again password r00tme
# or encrypted using a crypt(3)  hash.
#d-i passwd/root-password-crypted password [crypt(3) hash]
# d-i passwd/root-password-crypted password $1$0jG8V.wJ$N6Z/DnaCW0TsDCWj0hspi0
d-i passwd/root-password-crypted password $6$SMEM/tTbE$eeQYJBRapfP2fnbTo725XHT5KT83ndPbQE5ejOYnrMkZD1lz7J2iSOauP1XZx9.iZJw3CEgOCuG8bfZRMXT061

# To create a normal user account.
d-i passwd/user-fullname string Charles Curley
d-i passwd/username string charles
# Normal user's password, either in clear text
# d-i passwd/user-password password r00tme
# d-i passwd/user-password-again password r00tme
# or encrypted using a crypt(3) hash.
# d-i passwd/user-password-crypted password $1$6Q4EynQU$dtmE994lMfHWJaPZUo8mx0
d-i passwd/user-password-crypted password $6$mjcd0SP7QTw8$oIqFBaWsBTiECqNodRGgD4o1vi/D1NDfpkCWVpg6OwDKhhg97G7iCLnOrFhV0FtxhZEQHZeqARGp3NSMRnyud/
# Create the first user with the specified UID instead of the default.
#d-i passwd/user-uid string 1010

# The user account will be added to some standard initial groups. To
# override that, use this.
#d-i passwd/user-default-groups string audio cdrom video

### Clock and time zone setup
# Controls whether or not the hardware clock is set to UTC. False for
# Windows.
# d-i clock-setup/utc boolean true
d-i clock-setup/utc boolean false

# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
# d-i time/zone string US/Eastern
d-i time/zone string US/Mountain

# Controls whether to use NTP to set the clock during the install
d-i clock-setup/ntp boolean true
# NTP server to use. The default is almost always fine here.
d-i clock-setup/ntp-server string ntp.localdomain ntp1.localdomain

### Partitioning
## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
# d-i partman-auto/method string crypto

# You can define the amount of space that will be used for the LVM volume
# group. It can either be a size with its unit (eg. 20 GB), a percentage of
# free space or the 'max' keyword.
# d-i partman-auto-lvm/guided_size string max

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
# d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
# d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
# d-i partman-lvm/confirm boolean true
# d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /var, and /tmp partitions
# d-i partman-auto/choose_recipe select home

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
# d-i partman-partitioning/confirm_write_new_label boolean true
# d-i partman/choose_partition select finish
# d-i partman/confirm boolean true
# d-i partman/confirm_nooverwrite boolean true

# When disk encryption is enabled, skip wiping the partitions beforehand.
#d-i partman-auto-crypto/erase_disks boolean false

# # For virtual machines on Hawk and likely elsewhere.
# d-i partman-auto/disk string /dev/vda
# d-i partman-auto/method string regular
# d-i partman-lvm/device_remove_lvm boolean true
# d-i partman-md/device_remove_md boolean true
# d-i partman-lvm/confirm boolean true
# d-i partman-lvm/confirm_nooverwrite boolean true
# d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              4915 512 1000000000 ext3                        \
#                      $primary{ }                             \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              1280 512 10000000000 fat16                      \
#                      $extended{ }                            \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ fat16 }   \
#              .                                               \
#              976 976 200% linux-swap                         \
#                      $primary{ }                             \
#                      method{ swap } format{ }                \
#              .                                               \

## Partitioning using RAID
# The method should be set to "raid".
#d-i partman-auto/method string raid
# Specify the disks to be partitioned. They will all get the same layout,
# so this will only work if the disks are the same size.
#d-i partman-auto/disk string /dev/sda /dev/sdb

# Next you need to specify the physical partitions that will be used. 
#d-i partman-auto/expert_recipe string \
#      multiraid ::                                         \
#              1000 5000 4000 raid                          \
#                      $primary{ } method{ raid }           \
#              .                                            \
#              64 512 300% raid                             \
#                      method{ raid }                       \
#              .                                            \
#              500 10000 1000000000 raid                    \
#                      method{ raid }                       \
#              .

# Last you need to specify how the previously defined partitions will be
# used in the RAID setup. Remember to use the correct partition numbers
# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
# devices are separated using "#".
# Parameters are:
# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
#          <devices> <sparedevices>

#d-i partman-auto-raid/recipe string \
#    1 2 0 ext3 /                    \
#          /dev/sda1#/dev/sdb1       \
#    .                               \
#    1 2 0 swap -                    \
#          /dev/sda5#/dev/sdb5       \
#    .                               \
#    0 2 0 ext3 /home                \
#          /dev/sda6#/dev/sdb6       \
#    .

# For additional information see the file partman-auto-raid-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository.

# # This makes partman automatically partition without confirmation.
# d-i partman-md/confirm boolean true
# d-i partman-partitioning/confirm_write_new_label boolean true
# d-i partman/choose_partition select finish
# d-i partman/confirm boolean true
# d-i partman/confirm_nooverwrite boolean true

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid

### Base system installation
# Configure APT to not install recommended packages by default. Use of this
# option can result in an incomplete system and should only be used by very
# experienced users.
#d-i base-installer/install-recommends boolean false

# The kernel image (meta) package to be installed; "none" can be used if no
# kernel is to be installed.
#d-i base-installer/kernel/image string linux-image-686
d-i base-installer/kernel/image string linux-image-686
# d-i base-installer/kernel/image string linux-image-amd64

### Apt setup
# You can choose to install non-free, non-free-firmware and contrib
# software.
d-i apt-setup/non-free boolean true
d-i apt-setup/contrib boolean true
d-i apt-setup/non-free-firmware boolean true
# Uncomment this if you don't want to use a network mirror.
#d-i apt-setup/use_mirror boolean false
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
d-i apt-setup/services-select multiselect security, updates
d-i apt-setup/security_host string security.debian.org

# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string \
#       http://local.server/debian stable main
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
#d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
#d-i apt-setup/local0/key string http://local.server/key

# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
# authentication. Warning: Insecure, not recommended.
#d-i debian-installer/allow_unauthenticated boolean true

# Uncomment this to add multiarch configuration for i386
#d-i apt-setup/multiarch string i386


# XFCE for dragon & other laptops & desktops. *NOT* for FIT-PCs and
# other server only. or tasksel it later...

### Package selection
#tasksel tasksel/first multiselect standard, web-server, kde-desktop
# tasksel tasksel/first multiselect standard, ssh-server

# or no tasksel run at all. Requires runing it manually after reboot.
d-i pkgsel/run_tasksel boolean false

# Individual additional packages to install
#d-i pkgsel/include string openssh-server build-essential
# d-i pkgsel/include string openssh-server net-tools console-setup
# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
#d-i pkgsel/upgrade select none

# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean false

### Boot loader installation
# Grub is the default boot loader (for x86). If you want lilo installed
# instead, uncomment this:
#d-i grub-installer/skip boolean true
# To also skip installing lilo, and install no bootloader, uncomment this
# too:
#d-i lilo-installer/skip boolean true


# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
# d-i grub-installer/only_debian boolean true

# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true

# Due notably to potential USB sticks, the location of the MBR can not be
# determined safely in general, so this needs to be specified:
d-i grub-installer/bootdev  string /dev/sda

# virtual machines.
# d-i grub-installer/bootdev  string /dev/vda

# To install to the first device (assuming it is not a USB stick):
# d-i grub-installer/bootdev  string default

# Alternatively, if you want to install to a location other than the mbr,
# uncomment and edit these lines:
#d-i grub-installer/only_debian boolean false
#d-i grub-installer/with_other_os boolean false
#d-i grub-installer/bootdev  string (hd0,1)
# To install grub to multiple disks:
#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)

# Optional password for grub, either in clear text
#d-i grub-installer/password password r00tme
#d-i grub-installer/password-again password r00tme
# or encrypted using an MD5 hash, see grub-md5-crypt(8).
#d-i grub-installer/password-crypted password [MD5 hash]

# Use the following option to add additional boot parameters for the
# installed system (if supported by the bootloader installer).
# Note: options passed to the installer will be added automatically.
#d-i debian-installer/add-kernel-opts string nousb

### Finishing up the installation
# During installations from serial console, the regular virtual consoles
# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
# line to prevent this.
#d-i finish-install/keep-consoles boolean true

# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
#d-i cdrom-detect/eject boolean false

# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true

### Preseeding other packages
# Depending on what software you choose to install, or if things go wrong
# during the installation process, it's possible that other questions may
# be asked. You can preseed those too, of course. To get a list of every
# possible question that could be asked during an install, do an
# installation, and then run these commands:
#   debconf-get-selections --installer > file
#   debconf-get-selections >> file


#### Advanced options
### Running custom commands during the installation
# d-i preseeding is inherently not secure. Nothing in the installer checks
# for attempts at buffer overflows or other exploits of the values of a
# preconfiguration file like this one. Only use preconfiguration files from
# trusted locations! To drive that home, and because it's generally useful,
# here's a way to run any shell command you'd like inside the installer,
# automatically.

# This first command is run as early as possible, just after
# preseeding is read.
#d-i preseed/early_command string anna-install some-udeb
# This command is run immediately before the partitioner starts. It may be
# useful to apply dynamic partitioner preseeding that depends on the state
# of the disks (which may not be visible when preseed/early_command runs).
#d-i partman/early_command \
#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh

# Now for entries imported from Steve McIntyre's preseed examples.


### Description: Drivers to include in the initrd:
#   The primary function of an initrd is to allow the kernel to mount the
#   root file system. It therefore needs to contain all drivers and supporting
#   programs required to do that.
#   .
#   A generic initrd is much larger than a targeted one and may even be so
#   large that some boot loaders are unable to load it but has the advantage that
#   it can be used to boot the target system on almost any hardware. With the
#   smaller targeted initrd there is a very small chance that not all needed
#   drivers are included.
# d-i base-installer/initramfs-tools/driver-policy select <choice>
# Possible choices: generic: include all available drivers, targeted: only include drivers needed for this system
d-i base-installer/initramfs-tools/driver-policy select targeted


### Description: Scan extra installation media?
#   Scanning your installation media finds the label:
#   .
#   ${LABEL}
#   .
#   You now have the option of scanning additional media for use by the package
#   manager (apt). Normally these should be from the same set as the one you
#   booted from. If you do not have any additional media, this step can just be
#   skipped.
#   .
#   If you wish to scan more media, please insert another one now.
# d-i apt-setup/cdrom/set-first boolean false
d-i apt-setup/cdrom/set-first boolean false

### Description: Enable source repositories in APT?
#   By default source repositories are listed in /etc/apt/sources.list (with
#   appropriate "deb-src" lines) so that "apt-get source" works. However, if
#   you don't need this feature, you can disable those entries and save some
#   bandwidth during "apt-get update" operations.
# d-i apt-setup/enable-source-repositories boolean true
d-i apt-setup/enable-source-repositories boolean false


### Description: Force GRUB installation to the EFI removable media path?
#   It seems that this computer is configured to boot via EFI, but maybe
#   that configuration will not work for booting from the hard
#   drive. Some EFI firmware implementations do not meet the EFI
#   specification (i.e. they are buggy!) and do not support proper
#   configuration of boot options from system hard drives.
#   .
#   A workaround for this problem is to install an extra copy of the EFI
#   version of the GRUB boot loader to a fallback location, the
#   "removable media path". Almost all EFI systems, no matter how buggy,
#   will boot GRUB that way.
#   .
#   Warning: If the installer failed to detect another operating system
#   that is present on your computer that also depends on this fallback,
#   installing GRUB there will make that operating system temporarily
#   unbootable. GRUB can be manually configured later to boot it if
#   necessary.
# d-i grub-installer/force-efi-extra-removable boolean false
d-i grub-installer/force-efi-extra-removable boolean false


### Description: Updates management on this system:
#   Applying updates on a frequent basis is an important part of keeping the
#   system secure.
#   .
#   By default, security updates are not automatically installed, as security
#   advisories should be reviewed before manual installation of the updates
#   using standard package management tools.
#   .
#   Alternatively the unattended-upgrades package can be installed, which will
#   install security updates automatically. Note however that automatic
#   installation of updates may occasionally cause unexpected downtime of
#   services provided by this machine in the rare cases where the update is
#   not fully backward-compatible, or where the security advisory requires the
#   administrator to perform some other manual operation.
# d-i pkgsel/update-policy select none
d-i pkgsel/update-policy select Install security updates automatically
# Possible choices: No automatic updates, Install security updates automatically

# For the next three items, see the Debian Installation Manual writeup
# on preseeding, specifically "Chainloading preconfiguration files"
# https://www.debian.org/releases/bookworm/amd64/apbs05.en.html#preseed-chainload

# Possibly set computer-specific items in chained preseed files?

# More than one file can be listed, separated by spaces; all will be
# loaded. The included files can have preseed/include directives of their
# own as well. Note that if the filenames are relative, they are taken from
# the same directory as the preconfiguration file that includes them.
#d-i preseed/include string x.cfg

# The installer can optionally verify checksums of preconfiguration files
# before using them. Currently only md5sums are supported, list the md5sums
# in the same order as the list of files to include.
#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d

# More flexibly, this runs a shell command and if it outputs the names of
# preconfiguration files, includes those files. 
#d-i preseed/include_command \
#      string if [ "`hostname`" = bob ]; then echo bob.cfg; fi

# Most flexibly of all, this downloads a program and runs it. The program
# can use commands such as debconf-set to manipulate the debconf database.
# More than one script can be listed, separated by spaces.
# Note that if the filenames are relative, they are taken from the same
# directory as the preconfiguration file that runs them.
#d-i preseed/run string foo.sh

# ### From Brian <ad44@cityscape.co.uk>
# # Subject: Re: Preseed Bug or User Error?
# # Date: Tue, 2 Mar 2021 10:25:02 +0000
# d-i netcfg/wireless_show_essids select manual
# Possible choices: ${essid_list} Enter ESSID manually

# Name: netcfg/wireless_adhoc_managed
# Type: select
# Default: Infrastructure (Managed) network
# Choices: Infrastructure (Managed) network, Ad-hoc network (Peer to peer)
# Description: Type of wireless network:
# Extended_description: Wireless networks are either managed or ad-hoc. If you use a real access point of some sort, your network is Managed. If another computer is your 'access point', then your network may be Ad-hoc.

d-i netcfg/wireless_adhoc_managed string Infrastructure (Managed) network

# Wireless interface. This is for dragon, which does not like the gl
# AP, so we use the tp-link ap for it. gl stuff below. And comment
# all of this out if the target doesn't use wireless.

### Description: Wireless ESSID for ${iface}:
#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
#   of the wireless network you would like ${iface} to use. If you would like
#   to use any available network, leave this field blank.
# d-i netcfg/wireless_essid string CurleyNet314159

### Description: Wireless ESSID for ${iface}:
#   Attempting to find an available wireless network failed.
#   .
#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
#   of the wireless network you would like ${iface} to use. To connect to any
#   available network, leave this field blank.
# d-i netcfg/wireless_essid_again string CurleyNet314159

### Description: Wireless network type for ${iface}:
#   Choose WEP/Open if the network is open or secured with WEP.
#   Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK
#   (Pre-Shared Key).
# d-i netcfg/wireless_security_type select WEP/Open Network
# d-i netcfg/wireless_security_type select WPA/WPA2 PSK
# Possible choices: WEP/Open Network, WPA/WPA2 PSK

### Description: WEP key for wireless device ${iface}:
#   If applicable, please enter the WEP security key for the wireless
#   device ${iface}. There are two ways to do this:
#   .
#   If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn',
#   or 'nnnnnnnn', where n is a number, just enter it as it is into this field.
#   .
#   If your WEP key is in the format of a passphrase, prefix it with 's:'
#   (without quotes).
#   .
#   Of course, if there is no WEP key for your wireless network, leave this
#   field blank.
# d-i netcfg/wireless_wep string <string>

### Description: WPA/WPA2 passphrase for wireless device ${iface}:
#   Enter the passphrase for WPA/WPA2 PSK authentication. This should be the
#   passphrase defined for the wireless network you are trying to use.
# d-i netcfg/wireless_wpa string <redacted>


# # gl AP here....

### Description: Wireless ESSID for ${iface}:
#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
#   of the wireless network you would like ${iface} to use. If you would like
#   to use any available network, leave this field blank.
d-i netcfg/wireless_essid string Curleynet2

### Description: Wireless ESSID for ${iface}:
#   Attempting to find an available wireless network failed.
#   .
#   ${iface} is a wireless network interface. Please enter the name (the ESSID)
#   of the wireless network you would like ${iface} to use. To connect to any
#   available network, leave this field blank.#
d-i netcfg/wireless_essid_again string Curleynet2

### Description: Wireless network type for ${iface}:
#   Choose WEP/Open if the network is open or secured with WEP.
#   Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK
#   (Pre-Shared Key).
# d-i netcfg/wireless_security_type select wpa
d-i netcfg/wireless_security_type select WPA/WPA2 PSK
# Possible choices: WEP/Open Network, WPA/WPA2 PSK

### Description: WEP key for wireless device ${iface}:
#   If applicable, please enter the WEP security key for the wireless
#   device ${iface}. There are two ways to do this:
#   .
#   If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn',
#   or 'nnnnnnnn', where n is a number, just enter it as it is into this field.
#   .
#   If your WEP key is in the format of a passphrase, prefix it with 's:'
#   (without quotes).
#   .
#   Of course, if there is no WEP key for your wireless network, leave this
#   field blank.
# d-i netcfg/wireless_wep string <string>

### Description: WPA/WPA2 passphrase for wireless device ${iface}:
#   Enter the passphrase for WPA/WPA2 PSK authentication. This should be the
#   passphrase defined for the wireless network you are trying to use.
d-i netcfg/wireless_wpa string <redacted>


d-i firmware-ipw2x00/license/accepted boolean true
Apr  3 21:46:19 syslogd started: BusyBox v1.35.0
Apr  3 21:46:19 kernel: klogd started: BusyBox v1.35.0 (Debian 1:1.35.0-4+b2)
Apr  3 21:46:19 kernel: [    0.000000] Linux version 6.1.0-7-686 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.20-1 (2023-03-19)
Apr  3 21:46:19 kernel: [    0.000000] Disabled fast string operations
Apr  3 21:46:19 kernel: [    0.000000] x86/fpu: x87 FPU will use FXSAVE
Apr  3 21:46:19 kernel: [    0.000000] signal: max sigframe size: 1440
Apr  3 21:46:19 kernel: [    0.000000] BIOS-provided physical RAM map:
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004ff5ffff] usable
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x000000004ff60000-0x000000004ff76fff] ACPI data
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x000000004ff77000-0x000000004ff78fff] ACPI NVS
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x000000004ff80000-0x000000004fffffff] reserved
Apr  3 21:46:19 kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
Apr  3 21:46:19 kernel: [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
Apr  3 21:46:19 kernel: [    0.000000] SMBIOS 2.3 present.
Apr  3 21:46:19 kernel: [    0.000000] DMI: IBM 1836Q4U/1836Q4U, BIOS 1RETDLWW (3.17 ) 07/27/2005
Apr  3 21:46:19 kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Apr  3 21:46:19 kernel: [    0.000000] tsc: Detected 1598.712 MHz processor
Apr  3 21:46:19 kernel: [    0.005104] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Apr  3 21:46:19 kernel: [    0.005111] e820: remove [mem 0x000a0000-0x000fffff] usable
Apr  3 21:46:19 kernel: [    0.005124] last_pfn = 0x4ff60 max_arch_pfn = 0x100000
Apr  3 21:46:19 kernel: [    0.005158] x86/PAT: PAT not supported by the CPU.
Apr  3 21:46:19 kernel: [    0.005329] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
Apr  3 21:46:19 kernel: [    0.014041] initial memory mapped: [mem 0x00000000-0x083fffff]
Apr  3 21:46:19 kernel: [    0.014103] RAMDISK: [mem 0x4cebb000-0x4ff5ffff]
Apr  3 21:46:19 kernel: [    0.014106] Allocated new RAMDISK: [mem 0x33b59000-0x36bfdf07]
Apr  3 21:46:19 kernel: [    0.138226] Move RAMDISK from [mem 0x4cebb000-0x4ff5ff07] to [mem 0x33b59000-0x36bfdf07]
Apr  3 21:46:19 kernel: [    0.138240] ACPI: Early table checksum verification disabled
Apr  3 21:46:19 kernel: [    0.138251] ACPI: RSDP 0x00000000000F6D70 000024 (v02 IBM   )
Apr  3 21:46:19 kernel: [    0.138264] ACPI: XSDT 0x000000004FF6A6CD 00004C (v01 IBM    TP-1R    00003170  LTP 00000000)
Apr  3 21:46:19 kernel: [    0.138278] ACPI: FACP 0x000000004FF6A800 0000F4 (v03 IBM    TP-1R    00003170 IBM  00000001)
Apr  3 21:46:19 kernel: [    0.138290] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20220331/tbfadt-564)
Apr  3 21:46:19 kernel: [    0.138298] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20220331/tbfadt-615)
Apr  3 21:46:19 kernel: [    0.138309] ACPI: DSDT 0x000000004FF6A9E7 00C4D5 (v01 IBM    TP-1R    00003170 MSFT 0100000E)
Apr  3 21:46:19 kernel: [    0.138318] ACPI: FACS 0x000000004FF78000 000040
Apr  3 21:46:19 kernel: [    0.138325] ACPI: FACS 0x000000004FF78000 000040
Apr  3 21:46:19 kernel: [    0.138331] ACPI: SSDT 0x000000004FF6A9B4 000033 (v01 IBM    TP-1R    00003170 MSFT 0100000E)
Apr  3 21:46:19 kernel: [    0.138340] ACPI: ECDT 0x000000004FF76EBC 000052 (v01 IBM    TP-1R    00003170 IBM  00000001)
Apr  3 21:46:19 kernel: [    0.138349] ACPI: TCPA 0x000000004FF76F0E 000032 (v01 IBM    TP-1R    00003170 PTL  00000001)
Apr  3 21:46:19 kernel: [    0.138357] ACPI: BOOT 0x000000004FF76FD8 000028 (v01 IBM    TP-1R    00003170  LTP 00000001)
Apr  3 21:46:19 kernel: [    0.138365] ACPI: Reserving FACP table memory at [mem 0x4ff6a800-0x4ff6a8f3]
Apr  3 21:46:19 kernel: [    0.138368] ACPI: Reserving DSDT table memory at [mem 0x4ff6a9e7-0x4ff76ebb]
Apr  3 21:46:19 kernel: [    0.138371] ACPI: Reserving FACS table memory at [mem 0x4ff78000-0x4ff7803f]
Apr  3 21:46:19 kernel: [    0.138374] ACPI: Reserving FACS table memory at [mem 0x4ff78000-0x4ff7803f]
Apr  3 21:46:19 kernel: [    0.138377] ACPI: Reserving SSDT table memory at [mem 0x4ff6a9b4-0x4ff6a9e6]
Apr  3 21:46:19 kernel: [    0.138380] ACPI: Reserving ECDT table memory at [mem 0x4ff76ebc-0x4ff76f0d]
Apr  3 21:46:19 kernel: [    0.138383] ACPI: Reserving TCPA table memory at [mem 0x4ff76f0e-0x4ff76f3f]
Apr  3 21:46:19 kernel: [    0.138385] ACPI: Reserving BOOT table memory at [mem 0x4ff76fd8-0x4ff76fff]
Apr  3 21:46:19 kernel: [    0.138411] 403MB HIGHMEM available.
Apr  3 21:46:19 kernel: [    0.138413] 875MB LOWMEM available.
Apr  3 21:46:19 kernel: [    0.138415]   mapped low ram: 0 - 36bfe000
Apr  3 21:46:19 kernel: [    0.138417]   low ram: 0 - 36bfe000
Apr  3 21:46:19 kernel: [    0.138439] Zone ranges:
Apr  3 21:46:19 kernel: [    0.138440]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Apr  3 21:46:19 kernel: [    0.138445]   Normal   [mem 0x0000000001000000-0x0000000036bfdfff]
Apr  3 21:46:19 kernel: [    0.138449]   HighMem  [mem 0x0000000036bfe000-0x000000004ff5ffff]
Apr  3 21:46:19 kernel: [    0.138453] Movable zone start for each node
Apr  3 21:46:19 kernel: [    0.138454] Early memory node ranges
Apr  3 21:46:19 kernel: [    0.138456]   node   0: [mem 0x0000000000001000-0x000000000009efff]
Apr  3 21:46:19 kernel: [    0.138459]   node   0: [mem 0x0000000000100000-0x000000004ff5ffff]
Apr  3 21:46:19 kernel: [    0.138463] Initmem setup node 0 [mem 0x0000000000001000-0x000000004ff5ffff]
Apr  3 21:46:19 kernel: [    0.138490] On node 0, zone DMA: 1 pages in unavailable ranges
Apr  3 21:46:19 kernel: [    0.138728] On node 0, zone DMA: 97 pages in unavailable ranges
Apr  3 21:46:19 kernel: [    0.164030] Using APIC driver default
Apr  3 21:46:19 kernel: [    0.164171] ACPI: PM-Timer IO Port: 0x1008
Apr  3 21:46:19 kernel: [    0.164179] Local APIC disabled by BIOS -- you can enable it with "lapic"
Apr  3 21:46:19 kernel: [    0.164181] APIC: disable apic facility
Apr  3 21:46:19 kernel: [    0.164182] APIC: switched to apic NOOP
Apr  3 21:46:19 kernel: [    0.164186] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Apr  3 21:46:19 kernel: [    0.164215] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
Apr  3 21:46:19 kernel: [    0.164219] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Apr  3 21:46:19 kernel: [    0.164222] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
Apr  3 21:46:19 kernel: [    0.164224] PM: hibernation: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
Apr  3 21:46:19 kernel: [    0.164226] PM: hibernation: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
Apr  3 21:46:19 kernel: [    0.164229] PM: hibernation: Registered nosave memory: [mem 0x000dc000-0x000fffff]
Apr  3 21:46:19 kernel: [    0.164234] [mem 0x50000000-0xff7fffff] available for PCI devices
Apr  3 21:46:19 kernel: [    0.164237] Booting paravirtualized kernel on bare hardware
Apr  3 21:46:19 kernel: [    0.164246] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Apr  3 21:46:19 kernel: [    0.164261] setup_percpu: NR_CPUS:32 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
Apr  3 21:46:19 kernel: [    0.164599] percpu: Embedded 32 pages/cpu s99668 r0 d31404 u131072
Apr  3 21:46:19 kernel: [    0.164611] pcpu-alloc: s99668 r0 d31404 u131072 alloc=32*4096
Apr  3 21:46:19 kernel: [    0.164619] pcpu-alloc: [0] 0 
Apr  3 21:46:19 kernel: [    0.164665] Built 1 zonelists, mobility grouping on.  Total pages: 325232
Apr  3 21:46:19 kernel: [    0.164673] Kernel command line: BOOT_IMAGE=/install.386/vmlinuz priority=low vga=788 initrd=/install.386/gtk/initrd.gz ---  auto file=/media/preseed.cfg
Apr  3 21:46:19 kernel: [    0.165127] Unknown kernel command line parameters "--- auto BOOT_IMAGE=/install.386/vmlinuz priority=low vga=788 file=/media/preseed.cfg", will be passed to user space.
Apr  3 21:46:19 kernel: [    0.165720] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Apr  3 21:46:19 kernel: [    0.166075] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Apr  3 21:46:19 kernel: [    0.166133] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
Apr  3 21:46:19 kernel: [    0.166142] Initializing HighMem for node 0 (00036bfe:0004ff60)
Apr  3 21:46:19 kernel: [    0.239961] Initializing Movable for node 0 (00000000:00000000)
Apr  3 21:46:19 kernel: [    0.258948] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr  3 21:46:19 kernel: [    0.258975] Memory: 1230496K/1309688K available (9217K kernel code, 1234K rwdata, 2964K rodata, 884K init, 464K bss, 79192K reserved, 0K cma-reserved, 413064K highmem)
Apr  3 21:46:19 kernel: [    0.260332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Apr  3 21:46:19 kernel: [    0.260394] ftrace: allocating 36537 entries in 72 pages
Apr  3 21:46:19 kernel: [    0.273138] ftrace: allocated 72 pages with 2 groups
Apr  3 21:46:19 kernel: [    0.273564] trace event string verifier disabled
Apr  3 21:46:19 kernel: [    0.273694] Dynamic Preempt: voluntary
Apr  3 21:46:19 kernel: [    0.273800] rcu: Preemptible hierarchical RCU implementation.
Apr  3 21:46:19 kernel: [    0.273802] rcu: 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
Apr  3 21:46:19 kernel: [    0.273806] 	Trampoline variant of Tasks RCU enabled.
Apr  3 21:46:19 kernel: [    0.273807] 	Rude variant of Tasks RCU enabled.
Apr  3 21:46:19 kernel: [    0.273809] 	Tracing variant of Tasks RCU enabled.
Apr  3 21:46:19 kernel: [    0.273811] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Apr  3 21:46:19 kernel: [    0.273813] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Apr  3 21:46:19 kernel: [    0.292835] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
Apr  3 21:46:19 kernel: [    0.293102] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Apr  3 21:46:19 kernel: [    0.293283] Console: colour dummy device 80x25
Apr  3 21:46:19 kernel: [    0.293862] printk: console [tty0] enabled
Apr  3 21:46:19 kernel: [    0.293887] ACPI: Core revision 20220331
Apr  3 21:46:19 kernel: [    0.294050] ACPI: setting ELCR to 0200 (from 0800)
Apr  3 21:46:19 kernel: [    0.294114] APIC: Keep in PIC mode(8259)
Apr  3 21:46:19 kernel: [    0.294124] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170b6443fb6, max_idle_ns: 440795276958 ns
Apr  3 21:46:19 kernel: [    0.294153] Calibrating delay loop (skipped), value calculated using timer frequency.. 3197.42 BogoMIPS (lpj=6394848)
Apr  3 21:46:19 kernel: [    0.294170] pid_max: default: 32768 minimum: 301
Apr  3 21:46:19 kernel: [    0.294450] LSM: Security Framework initializing
Apr  3 21:46:19 kernel: [    0.294504] landlock: Up and running.
Apr  3 21:46:19 kernel: [    0.294511] Yama: disabled by default; enable with sysctl kernel.yama.*
Apr  3 21:46:19 kernel: [    0.294661] AppArmor: AppArmor initialized
Apr  3 21:46:19 kernel: [    0.294672] TOMOYO Linux initialized
Apr  3 21:46:19 kernel: [    0.294695] LSM support for eBPF active
Apr  3 21:46:19 kernel: [    0.294823] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Apr  3 21:46:19 kernel: [    0.294845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Apr  3 21:46:19 kernel: [    0.295818] Disabled fast string operations
Apr  3 21:46:19 kernel: [    0.295894] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Apr  3 21:46:19 kernel: [    0.295904] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
Apr  3 21:46:19 kernel: [    0.295918] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Apr  3 21:46:19 kernel: [    0.295932] Spectre V2 : Mitigation: Retpolines
Apr  3 21:46:19 kernel: [    0.295939] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Apr  3 21:46:19 kernel: [    0.295948] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Apr  3 21:46:19 kernel: [    0.295956] Speculative Store Bypass: Vulnerable
Apr  3 21:46:19 kernel: [    0.295963] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
Apr  3 21:46:19 kernel: [    0.295974] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Apr  3 21:46:19 kernel: [    0.295981] MMIO Stale Data: Unknown: No mitigations
Apr  3 21:46:19 kernel: [    0.304971] Freeing SMP alternatives memory: 32K
Apr  3 21:46:19 kernel: [    0.306430] smpboot: weird, boot CPU (#0) not listed by the BIOS
Apr  3 21:46:19 kernel: [    0.306440] smpboot: SMP disabled
Apr  3 21:46:19 kernel: [    0.306865] cblist_init_generic: Setting adjustable number of callback queues.
Apr  3 21:46:19 kernel: [    0.306877] cblist_init_generic: Setting shift to 0 and lim to 1.
Apr  3 21:46:19 kernel: [    0.306965] cblist_init_generic: Setting shift to 0 and lim to 1.
Apr  3 21:46:19 kernel: [    0.307063] cblist_init_generic: Setting shift to 0 and lim to 1.
Apr  3 21:46:19 kernel: [    0.307144] Performance Events: 
Apr  3 21:46:19 kernel: [    0.307149] no APIC, boot with the "lapic" boot parameter to force-enable it.
Apr  3 21:46:19 kernel: [    0.307162] no hardware sampling interrupt available.
Apr  3 21:46:19 kernel: [    0.307169] p6 PMU driver.
Apr  3 21:46:19 kernel: [    0.307176] ... version:                0
Apr  3 21:46:19 kernel: [    0.307182] ... bit width:              32
Apr  3 21:46:19 kernel: [    0.307189] ... generic registers:      2
Apr  3 21:46:19 kernel: [    0.307194] ... value mask:             00000000ffffffff
Apr  3 21:46:19 kernel: [    0.307202] ... max period:             000000007fffffff
Apr  3 21:46:19 kernel: [    0.307208] ... fixed-purpose events:   0
Apr  3 21:46:19 kernel: [    0.307214] ... event mask:             0000000000000003
Apr  3 21:46:19 kernel: [    0.310253] rcu: Hierarchical SRCU implementation.
Apr  3 21:46:19 kernel: [    0.310262] rcu: 	Max phase no-delay instances is 1000.
Apr  3 21:46:19 kernel: [    0.311048] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Apr  3 21:46:19 kernel: [    0.311148] smp: Bringing up secondary CPUs ...
Apr  3 21:46:19 kernel: [    0.311157] smp: Brought up 1 node, 1 CPU
Apr  3 21:46:19 kernel: [    0.311164] smpboot: Max logical packages: 1
Apr  3 21:46:19 kernel: [    0.311171] smpboot: Total of 1 processors activated (3197.42 BogoMIPS)
Apr  3 21:46:19 kernel: [    0.311579] devtmpfs: initialized
Apr  3 21:46:19 kernel: [    0.312250] ACPI: PM: Registering ACPI NVS region [mem 0x4ff77000-0x4ff78fff] (8192 bytes)
Apr  3 21:46:19 kernel: [    0.312392] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Apr  3 21:46:19 kernel: [    0.312427] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
Apr  3 21:46:19 kernel: [    0.312558] pinctrl core: initialized pinctrl subsystem
Apr  3 21:46:19 kernel: [    0.313348] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Apr  3 21:46:19 kernel: [    0.313702] audit: initializing netlink subsys (disabled)
Apr  3 21:46:19 kernel: [    0.314176] thermal_sys: Registered thermal governor 'fair_share'
Apr  3 21:46:19 kernel: [    0.314180] thermal_sys: Registered thermal governor 'bang_bang'
Apr  3 21:46:19 kernel: [    0.314189] thermal_sys: Registered thermal governor 'step_wise'
Apr  3 21:46:19 kernel: [    0.314196] thermal_sys: Registered thermal governor 'user_space'
Apr  3 21:46:19 kernel: [    0.314203] thermal_sys: Registered thermal governor 'power_allocator'
Apr  3 21:46:19 kernel: [    0.314248] cpuidle: using governor ladder
Apr  3 21:46:19 kernel: [    0.314385] Simple Boot Flag at 0x35 set to 0x1
Apr  3 21:46:19 kernel: [    0.314403] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
Apr  3 21:46:19 kernel: [    0.314439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Apr  3 21:46:19 kernel: [    0.314819] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
Apr  3 21:46:19 kernel: [    0.314830] PCI: Using configuration type 1 for base access
Apr  3 21:46:19 kernel: [    0.317728] audit: type=2000 audit(1680558370.020:1): state=initialized audit_enabled=0 res=1
Apr  3 21:46:19 kernel: [    0.317861] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
Apr  3 21:46:19 kernel: [    0.371515] HugeTLB: registered 4.00 MiB page size, pre-allocated 0 pages
Apr  3 21:46:19 kernel: [    0.371533] HugeTLB: 0 KiB vmemmap can be freed for a 4.00 MiB page
Apr  3 21:46:19 kernel: [    0.372640] ACPI: Added _OSI(Module Device)
Apr  3 21:46:19 kernel: [    0.372650] ACPI: Added _OSI(Processor Device)
Apr  3 21:46:19 kernel: [    0.372657] ACPI: Added _OSI(3.0 _SCP Extensions)
Apr  3 21:46:19 kernel: [    0.372664] ACPI: Added _OSI(Processor Aggregator Device)
Apr  3 21:46:19 kernel: [    0.387628] ACPI: 2 ACPI AML tables successfully acquired and loaded
Apr  3 21:46:19 kernel: [    0.388645] ACPI: EC: EC started
Apr  3 21:46:19 kernel: [    0.388652] ACPI: EC: interrupt blocked
Apr  3 21:46:19 kernel: [    0.390136] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr  3 21:46:19 kernel: [    0.390153] ACPI: EC: Boot ECDT EC used to handle transactions
Apr  3 21:46:19 kernel: [    0.399437] ACPI: Interpreter enabled
Apr  3 21:46:19 kernel: [    0.399484] ACPI: PM: (supports S0 S3 S4 S5)
Apr  3 21:46:19 kernel: [    0.399492] ACPI: Using PIC for interrupt routing
Apr  3 21:46:19 kernel: [    0.399528] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Apr  3 21:46:19 kernel: [    0.399540] PCI: Using E820 reservations for host bridge windows
Apr  3 21:46:19 kernel: [    0.399867] ACPI: Enabled 1 GPEs in block 00 to 1F
Apr  3 21:46:19 kernel: [    0.405193] ACPI: PM: Power Resource [PUBS]
Apr  3 21:46:19 kernel: [    0.411119] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
Apr  3 21:46:19 kernel: [    0.412790] acpi LNXDOCK:00: ACPI dock station (docks/bays count: 2)
Apr  3 21:46:19 kernel: [    0.414221] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 3)
Apr  3 21:46:19 kernel: [    0.417839] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.418056] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.418298] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.418511] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.418724] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.418881] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
Apr  3 21:46:19 kernel: [    0.418891] ACPI: PCI: Interrupt link LNKF disabled
Apr  3 21:46:19 kernel: [    0.419043] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
Apr  3 21:46:19 kernel: [    0.419052] ACPI: PCI: Interrupt link LNKG disabled
Apr  3 21:46:19 kernel: [    0.419262] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
Apr  3 21:46:19 kernel: [    0.419752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr  3 21:46:19 kernel: [    0.419772] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
Apr  3 21:46:19 kernel: [    0.419784] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
Apr  3 21:46:19 kernel: [    0.419807] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Apr  3 21:46:19 kernel: [    0.419845] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
Apr  3 21:46:19 kernel: [    0.419850] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
Apr  3 21:46:19 kernel: [    0.419854] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
Apr  3 21:46:19 kernel: [    0.419858] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
Apr  3 21:46:19 kernel: [    0.419863] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff window] (ignored)
Apr  3 21:46:19 kernel: [    0.419867] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff window] (ignored)
Apr  3 21:46:19 kernel: [    0.419871] acpi PNP0A03:00: host bridge window [mem 0x50000000-0xfebfffff window] (ignored)
Apr  3 21:46:19 kernel: [    0.419875] PCI: root bus 00: using default resources
Apr  3 21:46:19 kernel: [    0.420223] PCI host bridge to bus 0000:00
Apr  3 21:46:19 kernel: [    0.420232] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Apr  3 21:46:19 kernel: [    0.420243] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
Apr  3 21:46:19 kernel: [    0.420253] pci_bus 0000:00: root bus resource [bus 00-ff]
Apr  3 21:46:19 kernel: [    0.420289] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000
Apr  3 21:46:19 kernel: [    0.420309] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
Apr  3 21:46:19 kernel: [    0.420465] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400
Apr  3 21:46:19 kernel: [    0.420700] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
Apr  3 21:46:19 kernel: [    0.420757] pci 0000:00:1d.0: reg 0x20: [io  0x1800-0x181f]
Apr  3 21:46:19 kernel: [    0.420984] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
Apr  3 21:46:19 kernel: [    0.421041] pci 0000:00:1d.1: reg 0x20: [io  0x1820-0x183f]
Apr  3 21:46:19 kernel: [    0.421234] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
Apr  3 21:46:19 kernel: [    0.421292] pci 0000:00:1d.2: reg 0x20: [io  0x1840-0x185f]
Apr  3 21:46:19 kernel: [    0.421501] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
Apr  3 21:46:19 kernel: [    0.421530] pci 0000:00:1d.7: reg 0x10: [mem 0xc0000000-0xc00003ff]
Apr  3 21:46:19 kernel: [    0.421635] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.421848] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
Apr  3 21:46:19 kernel: [    0.422081] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
Apr  3 21:46:19 kernel: [    0.422176] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
Apr  3 21:46:19 kernel: [    0.422192] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
Apr  3 21:46:19 kernel: [    0.422425] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
Apr  3 21:46:19 kernel: [    0.422451] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
Apr  3 21:46:19 kernel: [    0.422469] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
Apr  3 21:46:19 kernel: [    0.422485] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
Apr  3 21:46:19 kernel: [    0.422502] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
Apr  3 21:46:19 kernel: [    0.422518] pci 0000:00:1f.1: reg 0x20: [io  0x1860-0x186f]
Apr  3 21:46:19 kernel: [    0.422535] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
Apr  3 21:46:19 kernel: [    0.422555] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Apr  3 21:46:19 kernel: [    0.422565] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
Apr  3 21:46:19 kernel: [    0.422573] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Apr  3 21:46:19 kernel: [    0.422582] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
Apr  3 21:46:19 kernel: [    0.422759] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
Apr  3 21:46:19 kernel: [    0.422816] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
Apr  3 21:46:19 kernel: [    0.422949] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
Apr  3 21:46:19 kernel: [    0.422973] pci 0000:00:1f.5: reg 0x10: [io  0x1c00-0x1cff]
Apr  3 21:46:19 kernel: [    0.422990] pci 0000:00:1f.5: reg 0x14: [io  0x18c0-0x18ff]
Apr  3 21:46:19 kernel: [    0.423006] pci 0000:00:1f.5: reg 0x18: [mem 0xc0000c00-0xc0000dff]
Apr  3 21:46:19 kernel: [    0.423022] pci 0000:00:1f.5: reg 0x1c: [mem 0xc0000800-0xc00008ff]
Apr  3 21:46:19 kernel: [    0.423082] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.423200] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
Apr  3 21:46:19 kernel: [    0.423225] pci 0000:00:1f.6: reg 0x10: [io  0x2400-0x24ff]
Apr  3 21:46:19 kernel: [    0.423241] pci 0000:00:1f.6: reg 0x14: [io  0x2000-0x207f]
Apr  3 21:46:19 kernel: [    0.423315] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.423491] pci_bus 0000:01: extended config space not accessible
Apr  3 21:46:19 kernel: [    0.423580] pci 0000:01:00.0: [1002:4c57] type 00 class 0x030000
Apr  3 21:46:19 kernel: [    0.423602] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
Apr  3 21:46:19 kernel: [    0.423618] pci 0000:01:00.0: reg 0x14: [io  0x3000-0x30ff]
Apr  3 21:46:19 kernel: [    0.423633] pci 0000:01:00.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
Apr  3 21:46:19 kernel: [    0.423664] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
Apr  3 21:46:19 kernel: [    0.423689] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.423724] pci 0000:01:00.0: supports D1 D2
Apr  3 21:46:19 kernel: [    0.423914] pci 0000:00:01.0: PCI bridge to [bus 01]
Apr  3 21:46:19 kernel: [    0.423925] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
Apr  3 21:46:19 kernel: [    0.423935] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
Apr  3 21:46:19 kernel: [    0.423946] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
Apr  3 21:46:19 kernel: [    0.423987] pci_bus 0000:02: extended config space not accessible
Apr  3 21:46:19 kernel: [    0.424115] acpiphp: Slot [1-1] registered
Apr  3 21:46:19 kernel: [    0.424141] pci 0000:02:00.0: [104c:ac46] type 02 class 0x060700
Apr  3 21:46:19 kernel: [    0.424166] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xb0000fff]
Apr  3 21:46:19 kernel: [    0.424211] pci 0000:02:00.0: supports D1 D2
Apr  3 21:46:19 kernel: [    0.424219] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.424439] pci 0000:02:02.0: [8086:4220] type 00 class 0x028000
Apr  3 21:46:19 kernel: [    0.424465] pci 0000:02:02.0: reg 0x10: [mem 0xc0204000-0xc0204fff]
Apr  3 21:46:19 kernel: [    0.424555] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.424677] pci 0000:02:08.0: [8086:103d] type 00 class 0x020000
Apr  3 21:46:19 kernel: [    0.424702] pci 0000:02:08.0: reg 0x10: [mem 0xc0205000-0xc0205fff]
Apr  3 21:46:19 kernel: [    0.424719] pci 0000:02:08.0: reg 0x14: [io  0x8000-0x803f]
Apr  3 21:46:19 kernel: [    0.424795] pci 0000:02:08.0: supports D1 D2
Apr  3 21:46:19 kernel: [    0.424803] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr  3 21:46:19 kernel: [    0.424949] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode)
Apr  3 21:46:19 kernel: [    0.424962] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
Apr  3 21:46:19 kernel: [    0.424974] pci 0000:00:1e.0:   bridge window [mem 0xc0200000-0xcfffffff]
Apr  3 21:46:19 kernel: [    0.424986] pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff pref]
Apr  3 21:46:19 kernel: [    0.424997] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
Apr  3 21:46:19 kernel: [    0.425008] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Apr  3 21:46:19 kernel: [    0.425044] pci_bus 0000:03: extended config space not accessible
Apr  3 21:46:19 kernel: [    0.425087] pci_bus 0000:03: busn_res: [bus 03-08] end is updated to 06
Apr  3 21:46:19 kernel: [    0.425110] pci_bus 0000:00: on NUMA node 0
Apr  3 21:46:19 kernel: [    0.427519] ACPI: EC: interrupt unblocked
Apr  3 21:46:19 kernel: [    0.427528] ACPI: EC: event unblocked
Apr  3 21:46:19 kernel: [    0.427537] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr  3 21:46:19 kernel: [    0.427545] ACPI: EC: GPE=0x1c
Apr  3 21:46:19 kernel: [    0.427552] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
Apr  3 21:46:19 kernel: [    0.427562] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
Apr  3 21:46:19 kernel: [    0.427843] iommu: Default domain type: Translated 
Apr  3 21:46:19 kernel: [    0.427852] iommu: DMA domain TLB invalidation policy: lazy mode 
Apr  3 21:46:19 kernel: [    0.428009] EDAC MC: Ver: 3.0.0
Apr  3 21:46:19 kernel: [    0.428759] NetLabel: Initializing
Apr  3 21:46:19 kernel: [    0.428767] NetLabel:  domain hash size = 128
Apr  3 21:46:19 kernel: [    0.428774] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Apr  3 21:46:19 kernel: [    0.428844] NetLabel:  unlabeled traffic allowed by default
Apr  3 21:46:19 kernel: [    0.428854] PCI: Using ACPI for IRQ routing
Apr  3 21:46:19 kernel: [    0.429035] PCI: pci_cache_line_size set to 64 bytes
Apr  3 21:46:19 kernel: [    0.429088] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
Apr  3 21:46:19 kernel: [    0.429093] e820: reserve RAM buffer [mem 0x4ff60000-0x4fffffff]
Apr  3 21:46:19 kernel: [    0.429213] pci 0000:01:00.0: vgaarb: setting as boot VGA device
Apr  3 21:46:19 kernel: [    0.429224] pci 0000:01:00.0: vgaarb: bridge control possible
Apr  3 21:46:19 kernel: [    0.429233] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Apr  3 21:46:19 kernel: [    0.429245] vgaarb: loaded
Apr  3 21:46:19 kernel: [    0.429455] clocksource: Switched to clocksource tsc-early
Apr  3 21:46:19 kernel: [    0.465270] VFS: Disk quotas dquot_6.6.0
Apr  3 21:46:19 kernel: [    0.465384] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr  3 21:46:19 kernel: [    0.465881] AppArmor: AppArmor Filesystem Enabled
Apr  3 21:46:19 kernel: [    0.465960] pnp: PnP ACPI init
Apr  3 21:46:19 kernel: [    0.467000] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467024] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467039] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467053] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467068] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467082] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
Apr  3 21:46:19 kernel: [    0.467203] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467216] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467226] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467236] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467247] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467257] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467267] system 00:00: [mem 0x00100000-0x4fffffff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467277] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
Apr  3 21:46:19 kernel: [    0.467595] system 00:01: [io  0x1000-0x107f] has been reserved
Apr  3 21:46:19 kernel: [    0.467609] system 00:01: [io  0x1180-0x11bf] has been reserved
Apr  3 21:46:19 kernel: [    0.467619] system 00:01: [io  0x15e0-0x15ef] has been reserved
Apr  3 21:46:19 kernel: [    0.467629] system 00:01: [io  0x1600-0x162f] has been reserved
Apr  3 21:46:19 kernel: [    0.467638] system 00:01: [io  0x1632-0x167f] has been reserved
Apr  3 21:46:19 kernel: [    0.467648] system 00:01: [io  0x1630-0x1631] has been reserved
Apr  3 21:46:19 kernel: [    0.469777] pnp: PnP ACPI: found 8 devices
Apr  3 21:46:19 kernel: [    0.469797] PnPBIOS: Disabled by ACPI PNP
Apr  3 21:46:19 kernel: [    0.509237] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Apr  3 21:46:19 kernel: [    0.509506] NET: Registered PF_INET protocol family
Apr  3 21:46:19 kernel: [    0.509779] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Apr  3 21:46:19 kernel: [    0.511027] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
Apr  3 21:46:19 kernel: [    0.511337] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Apr  3 21:46:19 kernel: [    0.511390] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Apr  3 21:46:19 kernel: [    0.511585] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
Apr  3 21:46:19 kernel: [    0.511686] TCP: Hash tables configured (established 8192 bind 8192)
Apr  3 21:46:19 kernel: [    0.511959] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
Apr  3 21:46:19 kernel: [    0.512043] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Apr  3 21:46:19 kernel: [    0.512083] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Apr  3 21:46:19 kernel: [    0.512234] NET: Registered PF_UNIX/PF_LOCAL protocol family
Apr  3 21:46:19 kernel: [    0.512265] NET: Registered PF_XDP protocol family
Apr  3 21:46:19 kernel: [    0.512323] pci 0000:00:1f.1: BAR 5: assigned [mem 0x50000000-0x500003ff]
Apr  3 21:46:19 kernel: [    0.512347] pci 0000:00:01.0: PCI bridge to [bus 01]
Apr  3 21:46:19 kernel: [    0.512356] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
Apr  3 21:46:19 kernel: [    0.512368] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
Apr  3 21:46:19 kernel: [    0.512379] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
Apr  3 21:46:19 kernel: [    0.512398] pci 0000:02:00.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
Apr  3 21:46:19 kernel: [    0.512411] pci 0000:02:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
Apr  3 21:46:19 kernel: [    0.512421] pci 0000:02:00.0: BAR 13: assigned [io  0x4000-0x40ff]
Apr  3 21:46:19 kernel: [    0.512431] pci 0000:02:00.0: BAR 14: assigned [io  0x4400-0x44ff]
Apr  3 21:46:19 kernel: [    0.512442] pci 0000:02:00.0: CardBus bridge to [bus 03-06]
Apr  3 21:46:19 kernel: [    0.512450] pci 0000:02:00.0:   bridge window [io  0x4000-0x40ff]
Apr  3 21:46:19 kernel: [    0.512461] pci 0000:02:00.0:   bridge window [io  0x4400-0x44ff]
Apr  3 21:46:19 kernel: [    0.512472] pci 0000:02:00.0:   bridge window [mem 0xe8000000-0xebffffff pref]
Apr  3 21:46:19 kernel: [    0.512485] pci 0000:02:00.0:   bridge window [mem 0xc4000000-0xc7ffffff]
Apr  3 21:46:19 kernel: [    0.512497] pci 0000:00:1e.0: PCI bridge to [bus 02-08]
Apr  3 21:46:19 kernel: [    0.512506] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
Apr  3 21:46:19 kernel: [    0.512518] pci 0000:00:1e.0:   bridge window [mem 0xc0200000-0xcfffffff]
Apr  3 21:46:19 kernel: [    0.512530] pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff pref]
Apr  3 21:46:19 kernel: [    0.512546] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
Apr  3 21:46:19 kernel: [    0.512556] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
Apr  3 21:46:19 kernel: [    0.512565] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
Apr  3 21:46:19 kernel: [    0.512574] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
Apr  3 21:46:19 kernel: [    0.512584] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
Apr  3 21:46:19 kernel: [    0.512594] pci_bus 0000:02: resource 0 [io  0x4000-0x8fff]
Apr  3 21:46:19 kernel: [    0.512603] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xcfffffff]
Apr  3 21:46:19 kernel: [    0.512612] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xefffffff pref]
Apr  3 21:46:19 kernel: [    0.512622] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
Apr  3 21:46:19 kernel: [    0.512630] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
Apr  3 21:46:19 kernel: [    0.512640] pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
Apr  3 21:46:19 kernel: [    0.512649] pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
Apr  3 21:46:19 kernel: [    0.512657] pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]
Apr  3 21:46:19 kernel: [    0.512667] pci_bus 0000:03: resource 3 [mem 0xc4000000-0xc7ffffff]
Apr  3 21:46:19 kernel: [    0.513284] pci 0000:00:1d.0: Refused to change power state from D1 to D0
Apr  3 21:46:19 kernel: [    0.513625] ACPI: \_SB_.LNKA: Enabled at IRQ 11
Apr  3 21:46:19 kernel: [    0.513638] PCI: setting IRQ 11 as level-triggered
Apr  3 21:46:19 kernel: [    0.513704] pci 0000:00:1d.1: Refused to change power state from D1 to D0
Apr  3 21:46:19 kernel: [    0.513978] ACPI: \_SB_.LNKD: Enabled at IRQ 11
Apr  3 21:46:19 kernel: [    0.514301] ACPI: \_SB_.LNKC: Enabled at IRQ 11
Apr  3 21:46:19 kernel: [    0.514623] ACPI: \_SB_.LNKH: Enabled at IRQ 11
Apr  3 21:46:19 kernel: [    0.514740] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
Apr  3 21:46:19 kernel: [    0.514755] PCI: CLS 32 bytes, default 64
Apr  3 21:46:19 kernel: [    0.515061] Trying to unpack rootfs image as initramfs...
Apr  3 21:46:19 kernel: [    0.520423] Initialise system trusted keyrings
Apr  3 21:46:19 kernel: [    0.520478] Key type blacklist registered
Apr  3 21:46:19 kernel: [    0.523132] workingset: timestamp_bits=14 max_order=19 bucket_order=5
Apr  3 21:46:19 kernel: [    0.531994] zbud: loaded
Apr  3 21:46:19 kernel: [    0.532582] integrity: Platform Keyring initialized
Apr  3 21:46:19 kernel: [    0.532611] integrity: Machine keyring initialized
Apr  3 21:46:19 kernel: [    0.532621] Key type asymmetric registered
Apr  3 21:46:19 kernel: [    0.532630] Asymmetric key parser 'x509' registered
Apr  3 21:46:19 kernel: [    1.538251] tsc: Refined TSC clocksource calibration: 1598.641 MHz
Apr  3 21:46:19 kernel: [    1.538291] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170b211c09a, max_idle_ns: 440795214030 ns
Apr  3 21:46:19 kernel: [    1.538343] clocksource: Switched to clocksource tsc
Apr  3 21:46:19 kernel: [    2.676610] Freeing initrd memory: 49812K
Apr  3 21:46:19 kernel: [    2.684749] alg: self-tests for CTR-KDF (hmac(sha256)) passed
Apr  3 21:46:19 kernel: [    2.685173] bounce: pool size: 64 pages
Apr  3 21:46:19 kernel: [    2.685315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Apr  3 21:46:19 kernel: [    2.685434] io scheduler mq-deadline registered
Apr  3 21:46:19 kernel: [    2.689174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr  3 21:46:19 kernel: [    2.689789] ACPI: \_PR_.CPU_: Found 3 idle states
Apr  3 21:46:19 kernel: [    2.689804] tsc: Marking TSC unstable due to TSC halts in idle
Apr  3 21:46:19 kernel: [    2.690284] clocksource: Not enough CPUs to check clocksource 'tsc'.
Apr  3 21:46:19 kernel: [    2.690317] clocksource: Switched to clocksource acpi_pm
Apr  3 21:46:19 kernel: [    2.691603] thermal LNXTHERM:00: registered as thermal_zone0
Apr  3 21:46:19 kernel: [    2.691615] ACPI: thermal: Thermal Zone [THM0] (57 C)
Apr  3 21:46:19 kernel: [    2.691784] isapnp: Scanning for PnP cards...
Apr  3 21:46:19 kernel: [    3.044877] isapnp: No Plug & Play device found
Apr  3 21:46:19 kernel: [    3.045076] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr  3 21:46:19 kernel: [    3.045221] serial 00:05: [io  0x03f8-0x03ff]
Apr  3 21:46:19 kernel: [    3.045678] serial 00:05: activated
Apr  3 21:46:19 kernel: [    3.046865] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Apr  3 21:46:19 kernel: [    3.048641] ACPI: \_SB_.LNKB: Enabled at IRQ 11
Apr  3 21:46:19 kernel: [    3.048943] Linux agpgart interface v0.103
Apr  3 21:46:19 kernel: [    3.049152] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
Apr  3 21:46:19 kernel: [    3.063192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Apr  3 21:46:19 kernel: [    3.063740] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Apr  3 21:46:19 kernel: [    3.068944] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  3 21:46:19 kernel: [    3.068963] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  3 21:46:19 kernel: [    3.069303] mousedev: PS/2 mouse device common for all mice
Apr  3 21:46:19 kernel: [    3.069376] rtc_cmos 00:02: RTC can wake from S4
Apr  3 21:46:19 kernel: [    3.069739] rtc_cmos 00:02: registered as rtc0
Apr  3 21:46:19 kernel: [    3.069778] rtc_cmos 00:02: setting system clock to 2023-04-03T21:46:13 UTC (1680558373)
Apr  3 21:46:19 kernel: [    3.069857] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
Apr  3 21:46:19 kernel: [    3.069906] intel_pstate: CPU model not supported
Apr  3 21:46:19 kernel: [    3.069934] ledtrig-cpu: registered to indicate activity on CPUs
Apr  3 21:46:19 kernel: [    3.070784] vesafb: mode is 800x600x16, linelength=1600, pages=33
Apr  3 21:46:19 kernel: [    3.070795] vesafb: protected mode interface info at c000:5710
Apr  3 21:46:19 kernel: [    3.070803] vesafb: pmi: set display start = (ptrval), set palette = (ptrval)
Apr  3 21:46:19 kernel: [    3.070812] vesafb: pmi: ports = 
Apr  3 21:46:19 kernel: [    3.070814] 3010 
Apr  3 21:46:19 kernel: [    3.070820] 3016 
Apr  3 21:46:19 kernel: [    3.070825] 3054 
Apr  3 21:46:19 kernel: [    3.070830] 3038 
Apr  3 21:46:19 kernel: [    3.070834] 303c 
Apr  3 21:46:19 kernel: [    3.070839] 305c 
Apr  3 21:46:19 kernel: [    3.070844] 3000 
Apr  3 21:46:19 kernel: [    3.070849] 3004 
Apr  3 21:46:19 kernel: [    3.070854] 30b0 
Apr  3 21:46:19 kernel: [    3.070858] 30b2 
Apr  3 21:46:19 kernel: [    3.070863] 30b4 
Apr  3 21:46:19 kernel: [    3.070868] 
Apr  3 21:46:19 kernel: [    3.070876] vesafb: scrolling: redraw
Apr  3 21:46:19 kernel: [    3.070882] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Apr  3 21:46:19 kernel: [    3.070899] vesafb: framebuffer at 0xe0000000, mapped to 0x(ptrval), using 1875k, total 32704k
Apr  3 21:46:19 kernel: [    3.089643] Console: switching to colour frame buffer device 100x37
Apr  3 21:46:19 kernel: [    3.108284] fb0: VESA VGA frame buffer device
Apr  3 21:46:19 kernel: [    3.109117] NET: Registered PF_INET6 protocol family
Apr  3 21:46:19 kernel: [    3.110822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Apr  3 21:46:19 kernel: [    3.115927] Segment Routing with IPv6
Apr  3 21:46:19 kernel: [    3.116176] In-situ OAM (IOAM) with IPv6
Apr  3 21:46:19 kernel: [    3.116464] mip6: Mobile IPv6
Apr  3 21:46:19 kernel: [    3.116641] NET: Registered PF_PACKET protocol family
Apr  3 21:46:19 kernel: [    3.117843] mpls_gso: MPLS GSO support
Apr  3 21:46:19 kernel: [    3.118458] microcode: sig=0x6d6, pf=0x20, revision=0x18
Apr  3 21:46:19 kernel: [    3.118768] microcode: Microcode Update Driver: v2.2.
Apr  3 21:46:19 kernel: [    3.118778] IPI shorthand broadcast: enabled
Apr  3 21:46:19 kernel: [    3.119552] registered taskstats version 1
Apr  3 21:46:19 kernel: [    3.126328] Loading compiled-in X.509 certificates
Apr  3 21:46:19 kernel: [    3.347982] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Apr  3 21:46:19 kernel: [    3.355031] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
Apr  3 21:46:19 kernel: [    3.369330] zswap: loaded using pool lzo/zbud
Apr  3 21:46:19 kernel: [    3.376553] Key type .fscrypt registered
Apr  3 21:46:19 kernel: [    3.383373] Key type fscrypt-provisioning registered
Apr  3 21:46:19 kernel: [    3.394690] Key type encrypted registered
Apr  3 21:46:19 kernel: [    3.401518] AppArmor: AppArmor sha1 policy hashing enabled
Apr  3 21:46:19 kernel: [    3.408686] ima: No TPM chip found, activating TPM-bypass!
Apr  3 21:46:19 kernel: [    3.416019] ima: Allocated hash algorithm: sha256
Apr  3 21:46:19 kernel: [    3.423517] ima: No architecture policies found
Apr  3 21:46:19 kernel: [    3.431157] evm: Initialising EVM extended attributes:
Apr  3 21:46:19 kernel: [    3.439001] evm: security.selinux
Apr  3 21:46:19 kernel: [    3.446910] evm: security.SMACK64 (disabled)
Apr  3 21:46:19 kernel: [    3.454968] evm: security.SMACK64EXEC (disabled)
Apr  3 21:46:19 kernel: [    3.463122] evm: security.SMACK64TRANSMUTE (disabled)
Apr  3 21:46:19 kernel: [    3.471408] evm: security.SMACK64MMAP (disabled)
Apr  3 21:46:19 kernel: [    3.479775] evm: security.apparmor
Apr  3 21:46:19 kernel: [    3.488166] evm: security.ima
Apr  3 21:46:19 kernel: [    3.496474] evm: security.capability
Apr  3 21:46:19 kernel: [    3.504705] evm: HMAC attrs: 0x1
Apr  3 21:46:19 kernel: [    4.720172] Unstable clock detected, switching default tracing clock to "global"
Apr  3 21:46:19 kernel: [    4.720172] If you want to keep using the local clock, then add:
Apr  3 21:46:19 kernel: [    4.720172]   "trace_clock=local"
Apr  3 21:46:19 kernel: [    4.720172] on the kernel command line
Apr  3 21:46:19 kernel: [    4.756844] Freeing unused kernel image (initmem) memory: 884K
Apr  3 21:46:19 kernel: [    4.768913] Write protecting kernel text and read-only data: 12184k
Apr  3 21:46:19 kernel: [    4.776746] Run /init as init process
Apr  3 21:46:19 kernel: [    4.784512]   with arguments:
Apr  3 21:46:19 kernel: [    4.784516]     /init
Apr  3 21:46:19 kernel: [    4.784518]     ---
Apr  3 21:46:19 kernel: [    4.784521]     auto
Apr  3 21:46:19 kernel: [    4.784523]   with environment:
Apr  3 21:46:19 kernel: [    4.784526]     HOME=/
Apr  3 21:46:19 kernel: [    4.784528]     TERM=linux
Apr  3 21:46:19 kernel: [    4.784530]     BOOT_IMAGE=/install.386/vmlinuz
Apr  3 21:46:19 kernel: [    4.784533]     priority=low
Apr  3 21:46:19 kernel: [    4.784535]     vga=788
Apr  3 21:46:19 kernel: [    4.784537]     file=/media/preseed.cfg
Apr  3 21:46:19 kernel: [    5.023034] ACPI: battery: Slot [BAT0] (battery present)
Apr  3 21:46:19 kernel: [    5.058530] ACPI: video: Video Device [VID] (multi-head: yes  rom: no  post: no)
Apr  3 21:46:19 kernel: [    5.129346] intel_rng: FWH not detected
Apr  3 21:46:19 kernel: [    5.169506] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input2
Apr  3 21:46:19 kernel: [    5.206804] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
Apr  3 21:46:19 kernel: [    5.215711] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
Apr  3 21:46:19 kernel: [    5.224677] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
Apr  3 21:46:19 kernel: [    5.233605] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
Apr  3 21:46:19 kernel: [    5.290801] SCSI subsystem initialized
Apr  3 21:46:19 kernel: [    5.308265] ACPI: bus type USB registered
Apr  3 21:46:19 kernel: [    5.368780] usbcore: registered new interface driver usbfs
Apr  3 21:46:19 kernel: [    5.424001] usbcore: registered new interface driver hub
Apr  3 21:46:19 kernel: [    5.457490] usbcore: registered new device driver usb
Apr  3 21:46:19 kernel: [    5.497387] ehci-pci 0000:00:1d.7: EHCI Host Controller
Apr  3 21:46:19 kernel: [    5.515448] libata version 3.00 loaded.
Apr  3 21:46:19 kernel: [    5.521580] uhci_hcd 0000:00:1d.0: Refused to change power state from D1 to D0
Apr  3 21:46:19 kernel: [    5.532163] ata_piix 0000:00:1f.1: version 2.13
Apr  3 21:46:19 kernel: [    5.532180] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Apr  3 21:46:19 kernel: [    5.543906] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
Apr  3 21:46:19 kernel: [    5.554434] scsi host0: ata_piix
Apr  3 21:46:19 kernel: [    5.563301] ehci-pci 0000:00:1d.7: debug port 1
Apr  3 21:46:19 kernel: [    5.572264] scsi host1: ata_piix
Apr  3 21:46:19 kernel: [    5.584880] ehci-pci 0000:00:1d.7: irq 11, io mem 0xc0000000
Apr  3 21:46:19 kernel: [    5.593786] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
Apr  3 21:46:19 kernel: [    5.602672] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
Apr  3 21:46:19 kernel: [    5.626175] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr  3 21:46:19 kernel: [    5.635258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Apr  3 21:46:19 kernel: [    5.644601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  3 21:46:19 kernel: [    5.654089] usb usb1: Product: EHCI Host Controller
Apr  3 21:46:19 kernel: [    5.663651] usb usb1: Manufacturer: Linux 6.1.0-7-686 ehci_hcd
Apr  3 21:46:19 kernel: [    5.673358] usb usb1: SerialNumber: 0000:00:1d.7
Apr  3 21:46:19 kernel: [    5.684267] hub 1-0:1.0: USB hub found
Apr  3 21:46:19 kernel: [    5.693656] hub 1-0:1.0: 6 ports detected
Apr  3 21:46:19 kernel: [    5.703546] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11
Apr  3 21:46:19 kernel: [    5.713069] yenta_cardbus 0000:02:00.0: Socket status: 30000086
Apr  3 21:46:19 kernel: [    5.723215] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr  3 21:46:19 kernel: [    5.733362] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr  3 21:46:19 kernel: [    5.742798] uhci_hcd 0000:00:1d.0: detected 2 ports
Apr  3 21:46:19 kernel: [    5.752181] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
Apr  3 21:46:19 kernel: [    5.761752] uhci_hcd 0000:00:1d.0: irq 11, io port 0x00001800
Apr  3 21:46:19 kernel: [    5.774773] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff:
Apr  3 21:46:19 kernel: [    5.784734] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 1.04, max UDMA/33
Apr  3 21:46:19 kernel: [    5.800511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Apr  3 21:46:19 kernel: [    5.809931] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  3 21:46:19 kernel: [    5.819329] usb usb2: Product: UHCI Host Controller
Apr  3 21:46:19 kernel: [    5.828657] usb usb2: Manufacturer: Linux 6.1.0-7-686 uhci_hcd
Apr  3 21:46:19 kernel: [    5.838080] usb usb2: SerialNumber: 0000:00:1d.0
Apr  3 21:46:19 kernel: [    5.848006] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
Apr  3 21:46:19 kernel: [    5.857520] ata1.00: 488397168 sectors, multi 16: LBA48 
Apr  3 21:46:19 kernel: [    5.868352]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x8000-0x803f
Apr  3 21:46:19 kernel: [    5.893522] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff]
Apr  3 21:46:19 kernel: [    5.914028] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xcfffffff:
Apr  3 21:46:19 kernel: [    5.925617] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVE-0 1A01 PQ: 0 ANSI: 5
Apr  3 21:46:19 kernel: [    5.937107] hub 2-0:1.0: USB hub found
Apr  3 21:46:19 kernel: [    5.948517]  excluding 0xc0200000-0xc09fffff 0xc3a00000-0xc81fffff 0xcfa00000-0xd01fffff
Apr  3 21:46:19 kernel: [    5.959263] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref]
Apr  3 21:46:19 kernel: [    5.981250] hub 2-0:1.0: 2 ports detected
Apr  3 21:46:19 kernel: [    5.992239] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 1.04 PQ: 0 ANSI: 5
Apr  3 21:46:19 kernel: [    6.003612] usb 1-3: new high-speed USB device number 2 using ehci-pci
Apr  3 21:46:19 kernel: [    6.016011] uhci_hcd 0000:00:1d.1: Refused to change power state from D1 to D0
Apr  3 21:46:19 kernel: [    6.028356] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr  3 21:46:19 kernel: [    6.040083] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xefffffff:
Apr  3 21:46:19 kernel: [    6.051696] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Apr  3 21:46:19 kernel: [    6.063630]  excluding 0xe8000000-0xefffffff
Apr  3 21:46:19 kernel: [    6.075279] uhci_hcd 0000:00:1d.1: detected 2 ports
Apr  3 21:46:19 kernel: [    6.088676] uhci_hcd 0000:00:1d.1: irq 11, io port 0x00001820
Apr  3 21:46:19 kernel: [    6.140141] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
Apr  3 21:46:19 kernel: [    6.156391] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Apr  3 21:46:19 kernel: [    6.168231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  3 21:46:19 kernel: [    6.180099] usb usb3: Product: UHCI Host Controller
Apr  3 21:46:19 kernel: [    6.191887] usb usb3: Manufacturer: Linux 6.1.0-7-686 uhci_hcd
Apr  3 21:46:19 kernel: [    6.203728] usb usb3: SerialNumber: 0000:00:1d.1
Apr  3 21:46:19 kernel: [    6.218315] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Apr  3 21:46:19 kernel: [    6.230280] cdrom: Uniform CD-ROM driver Revision: 3.20
Apr  3 21:46:19 kernel: [    6.243388]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
Apr  3 21:46:19 kernel: [    6.262672] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
Apr  3 21:46:19 kernel: [    6.274713] usb 1-3: New USB device found, idVendor=0718, idProduct=0637, bcdDevice= 1.00
Apr  3 21:46:19 kernel: [    6.286530] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  3 21:46:19 kernel: [    6.298290] usb 1-3: Product: Nano Pro
Apr  3 21:46:19 kernel: [    6.309851] usb 1-3: Manufacturer: Imation
Apr  3 21:46:19 kernel: [    6.321343] usb 1-3: SerialNumber: 07A304030AAED7A9
Apr  3 21:46:19 kernel: [    6.337643]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
Apr  3 21:46:19 kernel: [    6.351064] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
Apr  3 21:46:19 kernel: [    6.368294]  clean
Apr  3 21:46:19 kernel: [    6.382750] hub 3-0:1.0: USB hub found
Apr  3 21:46:19 kernel: [    6.393956] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 60414 usecs (2910 samples)
Apr  3 21:46:19 kernel: [    6.416268] snd_intel8x0 0000:00:1f.5: clocking to 48000
Apr  3 21:46:19 kernel: [    6.432226] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
Apr  3 21:46:19 kernel: [    6.443778] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
Apr  3 21:46:19 kernel: [    6.455081] hub 3-0:1.0: 2 ports detected
Apr  3 21:46:19 kernel: [    6.466193] sd 0:0:0:0: [sda] Write Protect is off
Apr  3 21:46:19 kernel: [    6.476949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr  3 21:46:19 kernel: [    6.487023]  clean
Apr  3 21:46:19 kernel: [    6.498649] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr  3 21:46:19 kernel: [    6.513847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  3 21:46:19 kernel: [    6.537689] usb-storage 1-3:1.0: USB Mass Storage device detected
Apr  3 21:46:19 kernel: [    6.551109] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Apr  3 21:46:19 kernel: [    6.562123] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Apr  3 21:46:19 kernel: [    6.573970] scsi host2: usb-storage 1-3:1.0
Apr  3 21:46:19 kernel: [    6.584806]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Apr  3 21:46:19 kernel: [    6.596000] uhci_hcd 0000:00:1d.2: detected 2 ports
Apr  3 21:46:19 kernel: [    6.607088] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
Apr  3 21:46:19 kernel: [    6.619158] usbcore: registered new interface driver usb-storage
Apr  3 21:46:19 kernel: [    6.630111] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Apr  3 21:46:19 kernel: [    6.641100] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0/0x0, board id: 0, fw id: 4797594
Apr  3 21:46:19 kernel: [    6.663460] uhci_hcd 0000:00:1d.2: irq 11, io port 0x00001840
Apr  3 21:46:19 kernel: [    6.675897]  clean
Apr  3 21:46:19 kernel: [    6.686996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Apr  3 21:46:19 kernel: [    6.698323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  3 21:46:19 kernel: [    6.709624] usb usb4: Product: UHCI Host Controller
Apr  3 21:46:19 kernel: [    6.720776] usb usb4: Manufacturer: Linux 6.1.0-7-686 uhci_hcd
Apr  3 21:46:19 kernel: [    6.731803] usb usb4: SerialNumber: 0000:00:1d.2
Apr  3 21:46:19 kernel: [    6.742685] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
Apr  3 21:46:19 kernel: [    6.765274] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Apr  3 21:46:19 kernel: [    6.776966]  clean
Apr  3 21:46:19 kernel: [    6.788581] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
Apr  3 21:46:19 kernel: [    6.801102]  clean
Apr  3 21:46:19 kernel: [    6.813332] hub 4-0:1.0: USB hub found
Apr  3 21:46:19 kernel: [    6.825833] hub 4-0:1.0: 2 ports detected
Apr  3 21:46:19 kernel: [    6.843043]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Apr  3 21:46:19 kernel: [    6.856709] sd 0:0:0:0: [sda] Attached SCSI disk
Apr  3 21:46:19 kernel: [    6.887532] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
Apr  3 21:46:19 kernel: [    6.905422] usbcore: registered new interface driver uas
Apr  3 21:46:19 kernel: [    7.424073] sr 1:0:0:0: Attached scsi CD-ROM sr0
Apr  3 21:46:19 kernel: [    7.610022] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Apr  3 21:46:19 kernel: [    7.651411] scsi 2:0:0:0: Direct-Access     Imation  Nano Pro         PMAP PQ: 0 ANSI: 0 CCS
Apr  3 21:46:19 kernel: [    7.666267] sd 2:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.87 GiB)
Apr  3 21:46:19 kernel: [    7.679007] sd 2:0:0:0: [sdb] Write Protect is off
Apr  3 21:46:19 kernel: [    7.690660] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
Apr  3 21:46:19 kernel: [    7.691381] sd 2:0:0:0: [sdb] No Caching mode page found
Apr  3 21:46:19 kernel: [    7.702845] sd 2:0:0:0: [sdb] Assuming drive cache: write through
Apr  3 21:46:19 kernel: [    7.719658]  sdb: sdb1
Apr  3 21:46:19 kernel: [    7.731579] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Apr  3 21:46:19 kernel: [    7.908880] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
Apr  3 21:46:20 frontend: Setting debconf/priority to low
Apr  3 21:46:20 entropy-source: haveged needed: starting
Apr  3 21:46:20 haveged: haveged starting up
Apr  3 21:46:21 reopen-console: Found "auto" in the command line; falling back to simple mode for preseeding
Apr  3 21:46:21 reopen-console: Looking at console tty1 from /proc/consoles
Apr  3 21:46:21 reopen-console:    Adding tty0 to possible consoles list
Apr  3 21:46:21 reopen-console: Found no preferred console. Picking tty1
Apr  3 21:46:21 reopen-console: Running with preseeding. Picking preferred tty1 ONLY
Apr  3 21:46:21 reopen-console: Adding inittab entry for tty1
Apr  3 21:46:21 reopen-console: Restarting init to start d-i on the console(s) we found
Apr  3 21:46:21 init: reloading /etc/inittab
Apr  3 21:46:21 init: starting pid 374, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Apr  3 21:46:21 init: starting pid 375, tty '/dev/tty1': '/sbin/debian-installer'
Apr  3 21:46:22 init: process '/sbin/debian-installer' (pid 375) exited. Scheduling for restart.
Apr  3 21:46:22 kernel: [   12.294183] random: crng init done
Apr  3 21:46:23 init: starting pid 394, tty '/dev/tty1': '/sbin/debian-installer'
Apr  3 21:46:23 debconf: Setting debconf/language to en
Apr  3 21:46:23 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:46:30 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:46:30 main-menu[425]: INFO: Menu item 'cdrom-detect' selected
Apr  3 21:46:30 kernel: [   20.515270] intel_rng: FWH not detected
Apr  3 21:46:30 kernel: [   20.532918] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
Apr  3 21:46:30 kernel: [   20.547958]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
Apr  3 21:46:30 kernel: [   20.551371] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
Apr  3 21:46:30 kernel: [   20.551625]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
Apr  3 21:46:30 kernel: [   20.555725] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
Apr  3 21:46:30 kernel: [   20.559600]  clean
Apr  3 21:46:30 kernel: [   20.561701] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
Apr  3 21:46:30 kernel: [   20.564190]  clean
Apr  3 21:46:30 kernel: [   20.564244] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Apr  3 21:46:30 kernel: [   20.564256]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Apr  3 21:46:30 kernel: [   20.564562] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Apr  3 21:46:30 kernel: [   20.564585]  clean
Apr  3 21:46:30 kernel: [   20.564613] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Apr  3 21:46:30 kernel: [   20.564634]  clean
Apr  3 21:46:30 kernel: [   20.564663] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
Apr  3 21:46:30 kernel: [   20.566658]  clean
Apr  3 21:46:31 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Apr  3 21:46:33 hw-detect: Detected PCMCIA, installing pcmciautils.
Apr  3 21:46:33 apt-install: Queueing package pcmciautils for later installation
Apr  3 21:46:33 apt-install: Queueing package udev for later installation
Apr  3 21:46:33 apt-install: Queueing package pciutils for later installation
Apr  3 21:46:33 apt-install: Queueing package usbutils for later installation
Apr  3 21:46:33 apt-install: Queueing package eject for later installation
Apr  3 21:46:33 hw-detect: skipping check-missing-firmware as requested by the caller
Apr  3 21:46:33 cdrom-detect: Searching for Debian installation media...
Apr  3 21:46:33 cdrom-detect: Devices: '/dev/sr0'
Apr  3 21:46:33 kernel: [   23.488097] ISO 9660 Extensions: Microsoft Joliet Level 3
Apr  3 21:46:33 kernel: [   23.493118] ISO 9660 Extensions: RRIP_1991A
Apr  3 21:46:33 cdrom-detect: CD-ROM mount succeeded: device=/dev/sr0 fstype=iso9660
Apr  3 21:46:34 cdrom-detect: Detected CD 'Debian GNU/Linux testing "Bookworm" - Official Snapshot i386 NETINST with firmware 20230403-03:00'
Apr  3 21:46:35 cdrom-detect: Detected CD with 'testing' (bookworm) distribution
Apr  3 21:46:35 anna-install: Queueing udeb eject-udeb for later installation
Apr  3 21:46:37 anna-install: Queueing udeb apt-mirror-setup for later installation
Apr  3 21:46:37 anna-install: Queueing udeb apt-cdrom-setup for later installation
Apr  3 21:46:37 anna-install: Queueing udeb bookworm-support for later installation
Apr  3 21:46:37 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:46:45 init: starting pid 372, tty '/dev/tty2': '-/bin/sh'
Apr  3 21:46:55 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:46:55 main-menu[425]: INFO: Menu item 'file-preseed' selected
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sda on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): umount: can't unmount /media: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sda on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sdb on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): umount: can't unmount /media: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sdb on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sda1 on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): umount: can't unmount /media: Invalid argument
Apr  3 21:48:27 main-menu[425]: (process:923): mount: mounting /dev/sda1 on /media failed: Invalid argument
Apr  3 21:48:27 main-menu[425]: WARNING **: Configuring 'file-preseed' failed with error code 1
Apr  3 21:48:27 main-menu[425]: WARNING **: Menu item 'file-preseed' failed.
Apr  3 21:48:29 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:48:30 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:48:30 main-menu[425]: INFO: Menu item 'file-preseed' selected
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sda on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): umount: can't unmount /media: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sda on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sdb on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): umount: can't unmount /media: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sdb on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sda1 on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): umount: can't unmount /media: Invalid argument
Apr  3 21:48:37 main-menu[425]: (process:1122): mount: mounting /dev/sda1 on /media failed: Invalid argument
Apr  3 21:48:37 main-menu[425]: WARNING **: Configuring 'file-preseed' failed with error code 1
Apr  3 21:48:37 main-menu[425]: WARNING **: Menu item 'file-preseed' failed.
Apr  3 21:48:40 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:49:28 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:49:28 main-menu[425]: INFO: Menu item 'file-preseed' selected
Apr  3 21:49:28 debconf: Setting debconf/priority to critical
Apr  3 21:49:30 preseed: successfully loaded preseed file from file:///media/preseed.cfg
Apr  3 21:49:30 main-menu[425]: INFO: Priority changed externally, setting main-menu default to 'critical' (critical)
Apr  3 21:49:30 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:49:30 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:49:30 main-menu[425]: INFO: Menu item 'load-cdrom' selected
Apr  3 21:49:32 cdrom-retriever: warning: File /cdrom/dists/bookworm/main/debian-installer/binary-i386/Packages does not exist.
Apr  3 21:49:33 anna[3025]: DEBUG: resolver (fat-modules): package doesn't exist (ignored)
Apr  3 21:49:33 anna[3025]: DEBUG: resolver (scsi-modules): package doesn't exist (ignored)
Apr  3 21:49:33 anna[3025]: DEBUG: resolver (fat-modules): package doesn't exist (ignored)
Apr  3 21:49:33 anna[3025]: DEBUG: resolver (scsi-modules): package doesn't exist (ignored)
Apr  3 21:49:33 anna[3025]: DEBUG: retrieving apt-cdrom-setup 1:0.179
Apr  3 21:49:33 anna[3025]: DEBUG: retrieving apt-mirror-setup 1:0.179
Apr  3 21:49:33 anna[3025]: DEBUG: retrieving apt-setup-udeb 1:0.179
Apr  3 21:49:34 anna[3025]: DEBUG: retrieving base-installer 1.211
Apr  3 21:49:34 anna[3025]: DEBUG: retrieving bootstrap-base 1.211
Apr  3 21:49:34 anna[3025]: DEBUG: retrieving btrfs-progs-udeb 6.2-1
Apr  3 21:49:35 anna[3025]: DEBUG: retrieving choose-mirror-bin 2.119
Apr  3 21:49:35 anna[3025]: DEBUG: retrieving clock-setup 0.158
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving debian-archive-keyring-udeb 2023.3
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving di-utils-mapdevfs 1.145
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving debootstrap-udeb 1.0.128+nmu2
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving depthcharge-tools-installer 2
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving dmidecode-udeb 3.4-1
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving dosfstools-udeb 4.2-1
Apr  3 21:49:36 anna[3025]: DEBUG: retrieving e2fsprogs-udeb 1.47.0-2
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving finish-install 2.112
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving libfuse2-udeb 2.9.9-6+b1
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving fuse3-udeb 3.14.0-3
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving libfuse3-3-udeb 3.14.0-3
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving gpgv-udeb 2.2.40-1.1
Apr  3 21:49:37 anna[3025]: DEBUG: retrieving grub-installer 1.188
Apr  3 21:49:38 anna[3025]: DEBUG: retrieving grub-mount-udeb 2.06-8
Apr  3 21:49:38 anna[3025]: DEBUG: retrieving disk-detect 1.155
Apr  3 21:49:39 anna[3025]: DEBUG: retrieving ethdetect 1.155
Apr  3 21:49:39 anna[3025]: DEBUG: retrieving jfsutils-udeb 1.1.15-5
Apr  3 21:49:39 anna[3025]: DEBUG: retrieving kickseed-common 0.63
Apr  3 21:49:39 anna[3025]: DEBUG: retrieving libgcrypt20-udeb 1.10.1-3
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libgpg-error0-udeb 1.46-1
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libinih1-udeb 55-1
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libnl-3-200-udeb 3.7.0-0.2+b1
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libnl-genl-3-200-udeb 3.7.0-0.2+b1
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving liburcu8-udeb 0.13.2-1
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libzstd1-udeb 1.5.4+dfsg2-5
Apr  3 21:49:40 anna[3025]: DEBUG: retrieving libdevmapper1.02.1-udeb 2:1.02.185-2
Apr  3 21:49:41 anna[3025]: DEBUG: retrieving liblzo2-2-udeb 2.10-2
Apr  3 21:49:41 anna[3025]: DEBUG: retrieving mdadm-udeb 4.2-5
Apr  3 21:49:41 anna[3025]: DEBUG: retrieving ndisc6-udeb 1.0.5-1+b2
Apr  3 21:49:41 anna[3025]: DEBUG: retrieving rdnssd-udeb 1.0.5-1+b2
Apr  3 21:49:41 anna[3025]: DEBUG: retrieving netcfg 1.184
Apr  3 21:49:42 anna[3025]: DEBUG: retrieving nobootloader 1.65
Apr  3 21:49:42 anna[3025]: DEBUG: retrieving ntfs-3g-udeb 1:2022.10.3-1+b1
Apr  3 21:49:42 anna[3025]: DEBUG: retrieving open-iscsi-udeb 2.1.8-1
Apr  3 21:49:42 anna[3025]: DEBUG: retrieving libisns-udeb 0.101-0.2+b1
Apr  3 21:49:43 anna[3025]: DEBUG: retrieving os-prober-udeb 1.81
Apr  3 21:49:43 anna[3025]: DEBUG: retrieving libparted-fs-resize0-udeb 3.5-3
Apr  3 21:49:43 anna[3025]: DEBUG: retrieving libparted2-udeb 3.5-3
Apr  3 21:49:43 anna[3025]: DEBUG: retrieving partman-auto 160
Apr  3 21:49:43 anna[3025]: DEBUG: retrieving partman-auto-raid 49
Apr  3 21:49:44 anna[3025]: DEBUG: retrieving partman-base 222
Apr  3 21:49:44 anna[3025]: DEBUG: retrieving partman-utils 222
Apr  3 21:49:44 anna[3025]: DEBUG: retrieving partman-basicfilesystems 161
Apr  3 21:49:45 anna[3025]: DEBUG: retrieving partman-basicmethods 74
Apr  3 21:49:46 anna[3025]: DEBUG: retrieving partman-btrfs 57
Apr  3 21:49:46 anna[3025]: DEBUG: retrieving partman-cros 3
Apr  3 21:49:47 anna[3025]: DEBUG: retrieving partman-efi 98
Apr  3 21:49:47 anna[3025]: DEBUG: retrieving partman-ext3 111
Apr  3 21:49:48 anna[3025]: DEBUG: retrieving partman-iscsi 73
Apr  3 21:49:48 anna[3025]: DEBUG: retrieving partman-jfs 62
Apr  3 21:49:49 anna[3025]: DEBUG: retrieving partman-md 103
Apr  3 21:49:50 anna[3025]: DEBUG: retrieving partman-partitioning 144
Apr  3 21:49:50 anna[3025]: DEBUG: retrieving partman-target 125
Apr  3 21:49:51 anna[3025]: DEBUG: retrieving partman-xfs 68
Apr  3 21:49:52 anna[3025]: DEBUG: retrieving pkgsel 0.76
Apr  3 21:49:52 anna[3025]: DEBUG: retrieving network-preseed 1.113
Apr  3 21:49:53 anna[3025]: DEBUG: retrieving rdate-udeb 1:1.11-3
Apr  3 21:49:53 anna[3025]: DEBUG: retrieving tzsetup-udeb 1:0.120
Apr  3 21:49:54 anna[3025]: DEBUG: retrieving user-setup-udeb 1.93
Apr  3 21:49:55 anna[3025]: DEBUG: retrieving eject-udeb 2.38.1-5+b1
Apr  3 21:49:55 anna[3025]: DEBUG: retrieving libmount1-udeb 2.38.1-5+b1
Apr  3 21:49:56 anna[3025]: DEBUG: retrieving wide-dhcpv6-client-udeb 20080615-23
Apr  3 21:49:56 anna[3025]: DEBUG: retrieving libiw30-udeb 30~pre9-14
Apr  3 21:49:56 anna[3025]: DEBUG: retrieving wpasupplicant-udeb 2:2.10-12
Apr  3 21:49:56 anna[3025]: DEBUG: retrieving xfsprogs-udeb 6.1.0-1
Apr  3 21:49:56 anna[3025]: DEBUG: retrieving btrfs-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving crypto-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving efi-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving ext4-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving jfs-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving loop-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:57 anna[3025]: DEBUG: retrieving md-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:58 anna[3025]: DEBUG: retrieving mtd-core-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:49:58 anna[3025]: DEBUG: retrieving nic-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:00 anna[3025]: DEBUG: retrieving nic-pcmcia-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:01 anna[3025]: DEBUG: retrieving nic-shared-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:01 anna[3025]: DEBUG: retrieving nic-usb-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:01 anna[3025]: DEBUG: retrieving nic-wireless-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:03 anna[3025]: DEBUG: retrieving xfs-modules-6.1.0-7-686-di 6.1.20-1
Apr  3 21:50:06 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:50:06 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:50:06 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:50:06 main-menu[425]: INFO: Menu item 'ethdetect' selected
Apr  3 21:50:08 kernel: [  237.749721] intel_rng: FWH not detected
Apr  3 21:50:08 kernel: [  237.773894] e100: Intel(R) PRO/100 Network Driver
Apr  3 21:50:08 kernel: [  237.773905] e100: Copyright(c) 1999-2006 Intel Corporation
Apr  3 21:50:08 kernel: [  237.805327] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
Apr  3 21:50:08 kernel: [  237.808713]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
Apr  3 21:50:08 kernel: [  237.811392] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
Apr  3 21:50:08 kernel: [  237.812920]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
Apr  3 21:50:08 kernel: [  237.817612] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
Apr  3 21:50:08 kernel: [  237.819389] ACPI: \_SB_.LNKE: Enabled at IRQ 11
Apr  3 21:50:08 kernel: [  237.855042]  clean
Apr  3 21:50:08 kernel: [  237.855121] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
Apr  3 21:50:08 kernel: [  237.855523]  clean
Apr  3 21:50:08 kernel: [  237.855554] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Apr  3 21:50:08 kernel: [  237.855564]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Apr  3 21:50:08 kernel: [  237.855607] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Apr  3 21:50:08 kernel: [  237.855628]  clean
Apr  3 21:50:08 kernel: [  237.855656] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Apr  3 21:50:08 kernel: [  237.855676]  clean
Apr  3 21:50:08 kernel: [  237.855705] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
Apr  3 21:50:08 kernel: [  237.856118]  clean
Apr  3 21:50:08 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Apr  3 21:50:08 kernel: [  238.062059] e100 0000:02:08.0 eth0: addr 0xc0205000, irq 11, MAC addr 00:10:c6:c0:aa:26
Apr  3 21:50:08 kernel: [  238.088588] e100 0000:02:08.0 enp2s8: renamed from eth0
Apr  3 21:50:08 net/hw-detect.hotplug: Detected hotpluggable network interface enp2s8
Apr  3 21:50:08 kernel: [  238.171962] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Apr  3 21:50:08 kernel: [  238.174671] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
Apr  3 21:50:08 kernel: [  238.176711] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
Apr  3 21:50:08 kernel: [  238.178889] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Apr  3 21:50:08 kernel: [  238.178982] platform regulatory.0: firmware: direct-loading firmware regulatory.db
Apr  3 21:50:08 kernel: [  238.179026] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
Apr  3 21:50:08 kernel: [  238.192833] lib80211: common routines for IEEE802.11 drivers
Apr  3 21:50:08 kernel: [  238.192841] lib80211_crypt: registered algorithm 'NULL'
Apr  3 21:50:08 kernel: [  238.202134] libipw: 802.11 data/management/control stack, git-1.1.13
Apr  3 21:50:08 kernel: [  238.202139] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Apr  3 21:50:08 kernel: [  238.216045] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
Apr  3 21:50:08 kernel: [  238.216052] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Apr  3 21:50:08 kernel: [  238.216337] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Apr  3 21:50:08 kernel: [  238.216431] ipw2200 0000:02:02.0: firmware: failed to load ipw2200-bss.fw (-2)
Apr  3 21:50:08 kernel: [  238.216436] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
Apr  3 21:50:08 kernel: [  238.216461] ipw2200 0000:02:02.0: firmware: failed to load ipw2200-bss.fw (-2)
Apr  3 21:50:08 kernel: [  238.216465] ipw2200 0000:02:02.0: Direct firmware load for ipw2200-bss.fw failed with error -2
Apr  3 21:50:08 kernel: [  238.216472] ipw2200: Unable to load firmware: -2
Apr  3 21:50:08 kernel: [  238.216575] ipw2200: probe of 0000:02:02.0 failed with error -5
Apr  3 21:50:10 check-missing-firmware: looking at dmesg for the first time
Apr  3 21:50:10 check-missing-firmware: saving timestamp for a later use: [  238.216575]
Apr  3 21:50:10 check-missing-firmware: looking for firmware file ipw2200-bss.fw requested by ipw2200
Apr  3 21:50:10 check-missing-firmware: looking for firmware file ipw2200-bss.fw requested by ipw2200
Apr  3 21:50:10 check-missing-firmware: missing firmware files (ipw2200-bss.fw) for ipw2200
Apr  3 21:50:10 check-missing-firmware: mainloop iteration #1
Apr  3 21:50:10 check-missing-firmware: lookup with /cdrom/firmware/Contents-firmware
Apr  3 21:50:11 check-missing-firmware: installing firmware package /cdrom/firmware/firmware-ipw2x00_20230210-4_all.deb (non-free-firmware)
Apr  3 21:50:11 check-missing-firmware: removing and loading kernel module ipw2200
Apr  3 21:50:11 kernel: [  241.336392] libipw: 802.11 data/management/control stack, git-1.1.13
Apr  3 21:50:11 kernel: [  241.336404] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Apr  3 21:50:11 kernel: [  241.364937] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
Apr  3 21:50:11 kernel: [  241.364945] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Apr  3 21:50:11 kernel: [  241.365239] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Apr  3 21:50:11 kernel: [  241.365334] ipw2200 0000:02:02.0: firmware: failed to load ipw2200-bss.fw (-2)
Apr  3 21:50:11 kernel: [  241.365363] ipw2200 0000:02:02.0: firmware: failed to load ipw2200-bss.fw (-2)
Apr  3 21:50:11 kernel: [  241.365367] ipw2200 0000:02:02.0: Direct firmware load for ipw2200-bss.fw failed with error -2
Apr  3 21:50:11 kernel: [  241.365374] ipw2200: Unable to load firmware: -2
Apr  3 21:50:11 kernel: [  241.365478] ipw2200: probe of 0000:02:02.0 failed with error -5
Apr  3 21:50:12 check-missing-firmware: looking at dmesg again, restarting from timestamp: [  238.216575]
Apr  3 21:50:12 check-missing-firmware: timestamp found, truncating dmesg accordingly
Apr  3 21:50:12 check-missing-firmware: saving timestamp for a later use: [  241.365478]
Apr  3 21:50:12 check-missing-firmware: looking for firmware file ipw2200-bss.fw requested by ipw2200
Apr  3 21:50:12 check-missing-firmware: looking for firmware file ipw2200-bss.fw requested by ipw2200
Apr  3 21:50:12 check-missing-firmware: missing firmware files (ipw2200-bss.fw) for ipw2200
Apr  3 21:50:13 check-missing-firmware: taking network interface enp2s8 up/down
Apr  3 21:50:14 check-missing-firmware: looking at dmesg again, restarting from timestamp: [  241.365478]
Apr  3 21:50:14 check-missing-firmware: timestamp found, truncating dmesg accordingly
Apr  3 21:50:14 check-missing-firmware: keeping timestamp (no new lines): [  241.365478]
Apr  3 21:50:14 check-missing-firmware: no missing firmware in loaded kernel modules
Apr  3 21:50:14 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:50:14 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:50:14 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:50:14 main-menu[425]: INFO: Menu item 'netcfg' selected
Apr  3 21:50:14 netcfg[5074]: INFO: Starting netcfg v.1.184
Apr  3 21:50:14 netcfg[5074]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Apr  3 21:50:14 netcfg[5074]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Apr  3 21:50:14 netcfg[5074]: INFO: Taking down interface enp2s8
Apr  3 21:50:14 netcfg[5074]: INFO: Taking down interface lo
Apr  3 21:50:14 netcfg[5074]: INFO: Activating interface enp2s8
Apr  3 21:50:14 netcfg[5074]: DEBUG: State is now 0
Apr  3 21:50:14 netcfg[5074]: DEBUG: Want link on enp2s8
Apr  3 21:50:14 netcfg[5074]: INFO: Waiting time set to 4
Apr  3 21:50:15 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:15 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:15 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:15 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:16 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:16 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:16 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:16 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:17 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:17 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:17 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:17 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:18 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:18 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:18 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:18 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:50:18 netcfg[5074]: INFO: Reached timeout for link detection on enp2s8
Apr  3 21:50:18 netcfg[5074]: DEBUG: Commencing network autoconfiguration on enp2s8
Apr  3 21:50:18 netcfg[5074]: DEBUG: rdnssd started; PID: 5084
Apr  3 21:50:19 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:19 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:19 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:19 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:19 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:19 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:19 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:19 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:19 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:20 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:20 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:20 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:20 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:20 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:20 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:20 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:20 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:20 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:21 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:21 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:21 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:21 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:21 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:21 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:21 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:22 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:50:22 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:50:22 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:50:22 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:50:22 netcfg[5074]: INFO: No IPv6 support found... how does that happen?
Apr  3 21:50:22 netcfg[5074]: DEBUG: Stopping rdnssd, PID 5084
Apr  3 21:50:22 netcfg[5074]: DEBUG: No RA received; attempting IPv4 autoconfig
Apr  3 21:50:22 netcfg[5074]: WARNING **: Started DHCP client; PID is 5098
Apr  3 21:50:52 netcfg[5074]: DEBUG: Reading nameservers from /etc/resolv.conf
Apr  3 21:50:58 netcfg[5074]: DEBUG: State is now 3
Apr  3 21:50:58 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 198px. Clamping result to 191px!
Apr  3 21:50:58 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 198px. Clamping result to 191px!
Apr  3 21:51:04 netcfg[5074]: DEBUG: State is now 0
Apr  3 21:51:04 netcfg[5074]: DEBUG: Want link on enp2s8
Apr  3 21:51:04 netcfg[5074]: INFO: Waiting time set to 4
Apr  3 21:51:04 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:04 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:04 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:05 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:05 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:05 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:05 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:06 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:06 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:06 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:06 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:07 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:07 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:07 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:07 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:08 netcfg[5074]: INFO: ethtool-lite: enp2s8: carrier down
Apr  3 21:51:08 netcfg[5074]: INFO: Reached timeout for link detection on enp2s8
Apr  3 21:51:08 netcfg[5074]: DEBUG: Commencing network autoconfiguration on enp2s8
Apr  3 21:51:08 netcfg[5074]: DEBUG: rdnssd started; PID: 5103
Apr  3 21:51:08 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:08 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:08 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:08 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:08 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:08 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:08 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:08 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:09 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:09 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:09 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:09 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:09 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:09 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:09 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:09 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:09 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:10 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:10 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:10 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:10 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:10 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:10 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:10 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:10 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:10 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:11 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:11 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:11 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:11 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:11 netcfg[5074]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:51:11 netcfg[5074]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:51:11 netcfg[5074]: DEBUG: ip line: 2: enp2s8: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:51:11 netcfg[5074]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:51:11 netcfg[5074]: INFO: No IPv6 support found... how does that happen?
Apr  3 21:51:11 netcfg[5074]: DEBUG: Stopping rdnssd, PID 5103
Apr  3 21:51:11 netcfg[5074]: DEBUG: No RA received; attempting IPv4 autoconfig
Apr  3 21:51:11 netcfg[5074]: WARNING **: Started DHCP client; PID is 5117
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: started, v1.35.0
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: started, v1.35.0
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:51:40 main-menu[425]: (process:5073): udhcpc: broadca
Apr  3 21:51:41 netcfg[5074]: DEBUG: Reading nameservers from /etc/resolv.conf
Apr  3 21:53:02 main-menu[425]: sting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:53:02 main-menu[425]: (process:5073): u
Apr  3 21:54:06 main-menu[425]: dhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:54:06 main-menu[425]: (process:50
Apr  3 21:55:28 main-menu[425]: 73): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:55:28 main-menu[425]: (process:5073): udhcpc: broadcasting discov
Apr  3 21:56:32 main-menu[425]: er
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:56:32 main-menu[425]: (process:5073): udhcpc: broadcasting 
Apr  3 21:56:56 netcfg[5074]: DEBUG: State is now 3
Apr  3 21:56:56 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 198px. Clamping result to 191px!
Apr  3 21:56:56 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 198px. Clamping result to 191px!
Apr  3 21:57:04 main-menu[425]: discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: has been called with an unknown param: leasefail
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: received SIGTERM
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: broadcasting discover
Apr  3 21:57:04 main-menu[425]: (process:5073): udhcpc: received SIGTERM
Apr  3 21:57:04 main-menu[425]: INFO: Menu item 'netcfg' succeeded but requested to be left unconfigured.
Apr  3 21:57:04 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:04 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:57:13 kernel: [  663.298388] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
Apr  3 21:57:13 kernel: [  663.298493] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
Apr  3 21:57:16 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:16 main-menu[425]: INFO: Menu item 'netcfg' selected
Apr  3 21:57:16 netcfg[5176]: INFO: Starting netcfg v.1.184
Apr  3 21:57:16 netcfg[5176]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill.
Apr  3 21:57:16 netcfg[5176]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline
Apr  3 21:57:16 netcfg[5176]: INFO: Taking down interface enp2s8
Apr  3 21:57:16 netcfg[5176]: INFO: Taking down interface lo
Apr  3 21:57:16 netcfg[5176]: INFO: Activating interface enp2s8
Apr  3 21:57:16 netcfg[5176]: DEBUG: State is now 0
Apr  3 21:57:16 netcfg[5176]: DEBUG: Want link on enp2s8
Apr  3 21:57:16 netcfg[5176]: INFO: Waiting time set to 4
Apr  3 21:57:16 kernel: [  665.874323] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
Apr  3 21:57:16 kernel: [  665.878272] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
Apr  3 21:57:16 netcfg[5176]: INFO: ethtool-lite: enp2s8: carrier up
Apr  3 21:57:16 netcfg[5176]: INFO: Found link on enp2s8
Apr  3 21:57:16 netcfg[5176]: DEBUG: Commencing network autoconfiguration on enp2s8
Apr  3 21:57:16 netcfg[5176]: DEBUG: rdnssd started; PID: 5186
Apr  3 21:57:16 netcfg[5176]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:57:16 netcfg[5176]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:57:16 netcfg[5176]: DEBUG: ip line: 2: enp2s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:57:16 netcfg[5176]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:57:16 netcfg[5176]: DEBUG: ip line:     inet6 fe80::210:c6ff:fec0:aa26/64 scope link tentative 
Apr  3 21:57:16 netcfg[5176]: DEBUG: ip line:        valid_lft forever preferred_lft forever
Apr  3 21:57:17 netcfg[5176]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:57:17 netcfg[5176]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line: 2: enp2s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     inet6 fe80::210:c6ff:fec0:aa26/64 scope link tentative 
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:        valid_lft forever preferred_lft forever
Apr  3 21:57:17 netcfg[5176]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:57:17 netcfg[5176]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line: 2: enp2s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     inet6 fe80::210:c6ff:fec0:aa26/64 scope link tentative 
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:        valid_lft forever preferred_lft forever
Apr  3 21:57:17 netcfg[5176]: DEBUG: nc_v6_interface_configured(enp2s8, scope local)
Apr  3 21:57:17 netcfg[5176]: DEBUG: Running ip addr show enp2s8 to look for address
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line: 2: enp2s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel qlen 1000
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     link/ether 00:10:c6:c0:aa:26 brd ff:ff:ff:ff:ff:ff
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:     inet6 fe80::210:c6ff:fec0:aa26/64 scope link 
Apr  3 21:57:17 netcfg[5176]: DEBUG: Configured address found
Apr  3 21:57:17 netcfg[5176]: DEBUG: ip line:        valid_lft forever preferred_lft forever
Apr  3 21:57:17 netcfg[5176]: DEBUG: Running rdisc6 -1 -r 1 -w 500 -n enp2s8 to get IPv6 config flags
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:18 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:19 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:20 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:21 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:22 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: Soliciting ff02::2 (ff02::2) on enp2s8...
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: Timed out.
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 line: No response.
Apr  3 21:57:23 netcfg[5176]: DEBUG: rdisc6 parsing finished
Apr  3 21:57:23 netcfg[5176]: DEBUG: Stopping rdnssd, PID 5186
Apr  3 21:57:23 netcfg[5176]: DEBUG: No RA received; attempting IPv4 autoconfig
Apr  3 21:57:23 netcfg[5176]: WARNING **: Started DHCP client; PID is 5204
Apr  3 21:57:24 udhcpc: Got IP 192.168.100.5 (using enp2s8) and routing through 192.168.100.31
Apr  3 21:57:27 netcfg[5176]: DEBUG: Reading domain name returned via DHCP
Apr  3 21:57:27 netcfg[5176]: DEBUG: DHCP domain name is 'localdomain'
Apr  3 21:57:27 netcfg[5176]: DEBUG: Reading NTP servers from DHCP info
Apr  3 21:57:27 netcfg[5176]: DEBUG: Read NTP server 192.168.100.31
Apr  3 21:57:27 netcfg[5176]: DEBUG: Read NTP server 192.168.100.30
Apr  3 21:57:27 netcfg[5176]: DEBUG: Reading nameservers from /etc/resolv.conf
Apr  3 21:57:27 netcfg[5176]: DEBUG: Read nameserver 192.168.100.30
Apr  3 21:57:27 netcfg[5176]: DEBUG: Read nameserver 192.168.100.6
Apr  3 21:57:27 netcfg[5176]: DEBUG: Read nameserver 192.168.100.31
Apr  3 21:57:27 netcfg[5176]: DEBUG: State is now 1
Apr  3 21:57:27 netcfg[5176]: DEBUG: State is now 2
Apr  3 21:57:27 netcfg[5176]: DEBUG: State is now 5
Apr  3 21:57:27 netcfg[5176]: INFO: DHCP hostname: "dragonw"
Apr  3 21:57:27 netcfg[5176]: DEBUG: dragonw is a valid FQDN
Apr  3 21:57:27 netcfg[5176]: DEBUG: Preseeding domain from global: localdomain
Apr  3 21:57:27 netcfg[5176]: DEBUG: State is now 6
Apr  3 21:57:27 netcfg[5176]: DEBUG: Network config complete
Apr  3 21:57:27 netcfg[5176]: DEBUG: No interface given; clearing /etc/network/interfaces
Apr  3 21:57:27 netcfg[5176]: DEBUG: Writing informative header
Apr  3 21:57:27 netcfg[5176]: DEBUG: Success!
Apr  3 21:57:27 netcfg[5176]: DEBUG: Writing loopback interface
Apr  3 21:57:27 netcfg[5176]: DEBUG: Success!
Apr  3 21:57:27 netcfg[5176]: DEBUG: Writing DHCP stanza for enp2s8
Apr  3 21:57:27 netcfg[5176]: INFO: Detected enp2s8 as a hotpluggable device
Apr  3 21:57:27 netcfg[5176]: DEBUG: Success!
Apr  3 21:57:28 main-menu[425]: (process:5175): udhcpc: started, v1.35.0
Apr  3 21:57:28 main-menu[425]: (process:5175): udhcpc: broadcasting discover
Apr  3 21:57:28 main-menu[425]: (process:5175): udhcpc: broadcasting select for 192.168.100.5, server 192.168.100.30
Apr  3 21:57:28 main-menu[425]: (process:5175): udhcpc: lease of 192.168.100.5 obtained from 192.168.100.30, lease time 86400
Apr  3 21:57:28 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:28 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:57:28 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:28 main-menu[425]: INFO: Menu item 'user-setup-udeb' selected
Apr  3 21:57:29 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:29 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:57:29 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:29 main-menu[425]: INFO: Menu item 'clock-setup' selected
Apr  3 21:57:30 localechooser: info: debian-installer/language preseeded to 'en' (seen: true)
Apr  3 21:57:30 localechooser: info: debian-installer/country preseeded to 'US' (seen: true)
Apr  3 21:57:30 localechooser: info: debian-installer/locale preseeded to 'en_US.UTF-8' (seen: true)
Apr  3 21:57:30 debconf: Setting debconf/language to en
Apr  3 21:57:30 gtk-set-font: Switching to font 'DejaVu Sans' for 'en'
Apr  3 21:57:30 localechooser: info: Language = 'en'
Apr  3 21:57:30 localechooser: info: line=en;0;US;en_US.UTF-8;;console-setup
Apr  3 21:57:30 localechooser: info: Set debian-installer/language = 'en'
Apr  3 21:57:30 localechooser: info: Default country = 'US'
Apr  3 21:57:30 localechooser: info: Default locale = 'en_US.UTF-8'
Apr  3 21:57:30 localechooser: info: Set debian-installer/consoledisplay = 'console-setup'
Apr  3 21:57:30 debconf: Setting debconf/language to en
Apr  3 21:57:30 gtk-set-font: Switching to font 'DejaVu Sans' for 'en'
Apr  3 21:57:30 localechooser: info: Set debian-installer/country = 'US'
Apr  3 21:57:30 localechooser: info: Preseeded debian-installer/locale = 'en_US.UTF-8'
Apr  3 21:57:30 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Apr  3 21:57:30 localechooser: info: System locale (debian-installer/locale) = 'en_US.UTF-8'
Apr  3 21:57:30 clock-setup: rdate called using NTP server ntp.localdomain ntp1.localdomain.
Apr  3 21:57:30 clock-setup: rdate: ntp.localdomain ntp1.localdomain: Name or service not known
Apr  3 21:57:31 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:31 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:57:31 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:31 main-menu[425]: INFO: Menu item 'disk-detect' selected
Apr  3 21:57:32 kernel: [  681.955891] intel_rng: FWH not detected
Apr  3 21:57:32 net/hw-detect.hotplug: Detected hotpluggable network interface enp2s8
Apr  3 21:57:32 kernel: [  681.983303] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
Apr  3 21:57:32 kernel: [  681.983949]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
Apr  3 21:57:32 kernel: [  681.984411] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
Apr  3 21:57:32 kernel: [  681.984633]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
Apr  3 21:57:32 kernel: [  681.984856] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
Apr  3 21:57:32 kernel: [  681.985200]  clean
Apr  3 21:57:32 kernel: [  681.985228] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
Apr  3 21:57:32 kernel: [  681.985607]  clean
Apr  3 21:57:32 kernel: [  681.985636] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Apr  3 21:57:32 kernel: [  681.985647]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Apr  3 21:57:32 kernel: [  681.985688] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Apr  3 21:57:32 kernel: [  681.985709]  clean
Apr  3 21:57:32 kernel: [  681.985736] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Apr  3 21:57:32 kernel: [  681.985757]  clean
Apr  3 21:57:32 kernel: [  681.985785] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
Apr  3 21:57:32 kernel: [  682.035369]  clean
Apr  3 21:57:32 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Apr  3 21:57:34 check-missing-firmware: looking at dmesg again, restarting from timestamp: [  241.365478]
Apr  3 21:57:34 check-missing-firmware: timestamp found, truncating dmesg accordingly
Apr  3 21:57:34 check-missing-firmware: saving timestamp for a later use: [  682.035369]
Apr  3 21:57:34 check-missing-firmware: no missing firmware in loaded kernel modules
Apr  3 21:57:38 check-missing-firmware: looking at dmesg again, restarting from timestamp: [  682.035369]
Apr  3 21:57:38 check-missing-firmware: timestamp found, truncating dmesg accordingly
Apr  3 21:57:38 check-missing-firmware: keeping timestamp (no new lines): [  682.035369]
Apr  3 21:57:38 check-missing-firmware: no missing firmware in loaded kernel modules
Apr  3 21:57:39 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:39 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:57:39 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:57:39 main-menu[425]: INFO: Menu item 'partman-base' selected
Apr  3 21:57:39 anna-install: Installing partman-auto-lvm
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (cdebconf-udeb): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (di-utils): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (kernel-image-6.1.0-7-686-di): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (fat-modules): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (libdebian-installer4-udeb): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (archdetect): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: resolver (hw-detect): package doesn't exist (ignored)
Apr  3 21:57:39 anna[6647]: DEBUG: retrieving libaio1-udeb 0.3.113-4
Apr  3 21:57:39 anna[6647]: DEBUG: retrieving lvm2-udeb 2.03.16-2
Apr  3 21:57:40 anna[6647]: DEBUG: retrieving partman-auto-lvm 88
Apr  3 21:57:40 anna[6647]: DEBUG: retrieving partman-lvm 143
Apr  3 21:57:41 anna-install: Installing partman-auto-crypto
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (cdebconf-udeb): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (di-utils): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (kernel-image-6.1.0-7-686-di): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (fat-modules): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (libdebian-installer4-udeb): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (archdetect): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: resolver (hw-detect): package doesn't exist (ignored)
Apr  3 21:57:41 anna[6741]: DEBUG: retrieving partman-auto-crypto 34
Apr  3 21:57:42 anna[6741]: DEBUG: retrieving partman-crypto 118
Apr  3 21:57:45 kernel: [  694.402166] raid6: sse2x2   gen()  2532 MB/s
Apr  3 21:57:45 kernel: [  694.470164] raid6: sse2x1   gen()  2202 MB/s
Apr  3 21:57:45 kernel: [  694.538168] raid6: sse1x2   gen()  2420 MB/s
Apr  3 21:57:45 kernel: [  694.606171] raid6: sse1x1   gen()  1694 MB/s
Apr  3 21:57:45 kernel: [  694.606174] raid6: using algorithm sse2x2 gen() 2532 MB/s
Apr  3 21:57:45 kernel: [  694.674169] raid6: .... xor() 1479 MB/s, rmw enabled
Apr  3 21:57:45 kernel: [  694.674172] raid6: using intx1 recovery algorithm
Apr  3 21:57:45 kernel: [  694.678385] xor: measuring software checksum speed
Apr  3 21:57:45 kernel: [  694.680631]    pIII_sse        :  4391 MB/sec
Apr  3 21:57:45 kernel: [  694.682711]    prefetch64-sse  :  4797 MB/sec
Apr  3 21:57:45 kernel: [  694.682715] xor: using function: prefetch64-sse (4797 MB/sec)
Apr  3 21:57:45 kernel: [  694.950097] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
Apr  3 21:57:45 kernel: [  695.016458] JFS: nTxBlock = 8192, nTxLock = 65536
Apr  3 21:57:45 kernel: [  695.540379] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
Apr  3 21:57:48 md-devices: mdadm: No arrays found in config file or automatically
Apr  3 21:57:49 kernel: [  699.059827] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
Apr  3 21:57:49 kernel: [  699.059924] device-mapper: uevent: version 1.0.3
Apr  3 21:57:49 kernel: [  699.066207] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
Apr  3 21:57:49 partman:   No matching physical volumes found
Apr  3 21:58:04 main-menu[425]: (process:6633): depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/6.1.0-7-686: No such file or directory
Apr  3 21:58:04 main-menu[425]: (process:6633): mount: mounting none on /sys/firmware/efi/efivars failed: No such file or directory
Apr  3 21:58:04 main-menu[425]: INFO: Menu item 'partman-base' succeeded but requested to be left unconfigured.
Apr  3 21:58:05 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:58:05 depthcharge-tools-installer: Not installing to non-ChromeOS board.
Apr  3 21:58:11 main-menu[425]: INFO: Falling back to the package description for brltty-udeb
Apr  3 21:58:11 main-menu[425]: INFO: Menu item 'save-logs' selected
Apr  3 21:58:11 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 192px. Clamping result to 191px!
Apr  3 21:58:11 debconf: cdebconf_gtk (process:413): Gtk - WARNING: IA__gtk_text_layout_get_line_display: we asked Pango to wrap text for width 191px but it now wants 192px. Clamping result to 191px!

Reply to: