Re: recs1440.bin boot fails in SCSI init
On Fri, 03 Sep 1999, Tom Kuiper wrote:
> While booting an AST Premmia LX P/60 from a resc1440.bin or resc1440-safe.bin
> disk (images from the official 2.1 CD-ROM) the booting hangs during the SCSI
> initialization. It gets this far:
> ...
> ((scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 14/0
> (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
> (scsi0) Downloading sequencer code... 412 instructions.
>
> The same computer boots fine from a previous COL 1.1 kernel on its (SCSI)
> hard disk. In that case the SCSI driver is identified as aic7xxx.
>
> An almost identical machine (more meomory, IDE hard disk) works fine from a
> Slackware kernel which is a little over a year old and also uses the aic7xxx
> driver.
>
I am having the same problem with an Industrial Computer Source system.
Reply to: