Re: Serveur Netfinity 3500 pb carte ethernet intégrée pb resolu
Le problème est résolu, nous utilisons la dernière version de
seepro100.c solutionne les problèmes
de timeout ( eth0: Transmit timed out: status 0050 0070 at 5954/5966
command 000c0000.)
L'autre problème
> nfs: server netix not responding, still trying
> nfs: server netix not responding, still trying
> nfs: task 32 can't get a request slot
était du à la taille de la mtu, le serveur nfs se trouve sur un réseau
token ring mtu à 2000
le client sur un réseau ethernet mut à 1500.
Vincent Morlot wrote:
>
> Bonjour,
>
> Nous possédons des serveurs Netfinity 3500 fonctionnant sous
> slink, avec carte ethernet intégrée OEM i8557/i8558 10/100
> Ethernet. Ces machines fonctionnent correctement avec les
> versions de noyaux 2.0.36 ou 2.0.38.
>
> Par contre nous devons installer un gestionnaire de bases de
> données dessus l'une d'elle (db2) qui nécessite la mise en
> place d'un noyau 2.2.X. Or après plusieurs tentatives nous
> n'arrivons pas à faire fonctionner correctement ces machines
> après mises à jour du noyau (essais avec 2.2.10 et 2.2.12).
> Le démarrage s'effectue correctement mais le simple
> lancement d'un apt-get update bloque la machine ou
> simplement un cp sur un répertoire monté via nfs.
>
> Les seuls messages obtenus dans les logs,
>
> eepro100.c:v1.09l 8/7/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers
> /eepro100.html
> The PCI BIOS has not enabled this device! Updating PCI
> command 0103->0107.
> eth0: OEM i82557/i82558 10/100 Ethernet at 0xd0046000,
> 00:04:AC:96:E2:4A, IRQ 14
> .
> Board assembly 000002-002, Physical connectors present:
> RJ45
> Primary interface chip i82555 PHY #1.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x24c9f043).
> Receiver lock-up workaround activated.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> nfs: server netix not responding, still trying
> nfs: server netix not responding, still trying
> nfs: task 32 can't get a request slot
> eth0: Transmit timed out: status 0050 0070 at 5954/5966
> command 000c0000.
> eth0: Tx ring dump, Tx queue 5966 / 5954:
> eth0: 0 000ca000.
> eth0: 1 000ca000.
> eth0: * 2 000c0000.
> eth0: 3 000ca000.
> eth0: 4 000ca000.
> eth0: 5 000ca000.
> eth0: 6 000ca000.
> eth0: 7 000ca000.
> eth0: 8 000ca000.
> eth0: 9 000ca000.
> eth0: 10 000ca000.
> eth0: 11 000ca000.
> eth0: 12 000ca000.
> eth0: 13 400ca000.
> eth0: =14 000ca000.
> eth0: 15 000ca000.
> eth0: 16 000ca000.
> eth0: 17 000ca000.
> eth0: 18 000ca000.
> eth0: 19 000ca000.
> eth0: 20 000ca000.
> eth0: 21 000ca000.
> eth0: 22 000ca000.
> eth0: 23 000ca000.
> eth0: 24 000ca000.
> eth0: 25 000ca000.
> eth0: 26 000ca000.
> eth0: 27 000ca000.
> eth0: 28 000ca000.
> eth0: 29 000ca000.
> eth0: 30 000ca000.
> eth0: 31 000ca000.
> eth0:Printing Rx ring (next to receive into 8628).
> Rx ring entry 0 00000001.
> Rx ring entry 1 00000001.
> Rx ring entry 2 00000001.
> Rx ring entry 3 00000001.
> Rx ring entry 4 00000001.
> Rx ring entry 5 00000001.
> Rx ring entry 6 00000001.
> Rx ring entry 7 00000001.
> Rx ring entry 8 00000001.
> Rx ring entry 9 00000001.
> Rx ring entry 10 00000001.
> Rx ring entry 11 00000001.
> Rx ring entry 12 00000001.
> Rx ring entry 13 00000001.
> Rx ring entry 14 00000001.
> Rx ring entry 15 00000001.
> Rx ring entry 16 00000001.
> Rx ring entry 17 00000001.
> Rx ring entry 18 00000001.
> Rx ring entry 19 c0000001.
> Rx ring entry 20 00000001.
> Rx ring entry 21 00000001.
> Rx ring entry 22 00000001.
> Rx ring entry 23 00000001.
> Rx ring entry 24 00000001.
> Rx ring entry 25 00000001.
> Rx ring entry 26 00000001.
> Rx ring entry 27 00000001.
> Rx ring entry 28 00000001.
> Rx ring entry 29 00000001.
> Rx ring entry 30 00000001.
> Rx ring entry 31 00000001.
> PHY index 1 register 0 is 3000.
> PHY index 1 register 1 is 782d.
> PHY index 1 register 2 is 02a8.
> PHY index 1 register 3 is 0150.
> PHY index 1 register 4 is 05e1.
> PHY index 1 register 5 is 45e1.
> PHY index 1 register 21 is 0000.
> eth0: Trying to restart the transmitter...
> eth0: Transmit timed out: status 0050 0070 at 9807/9819
> command 000c0000.
> eth0: Tx ring dump, Tx queue 9819 / 9807:
>
> Nous avons fait l'essai sur plusieurs machines, le problème
> est indépendant de la machine.
>
> La machine faisant office de serveur nfs n'est pas en cause,
> elle est accessible depuis les autres machines
>
> Merci
>
> --
> To UNSUBSCRIBE, email to debian-french-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
Vincent Morlot(VincentMorlot@csi.com)
Reply to: