Bug#392078: cannot boot 2.6.18-1 on sunblade 100
On 13/10/2006, at 3:32 PM, Jurij Smakov wrote:
Thanks. One more thing: at boot time a line like this is displayed:
/pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Clock regs at 000001fff1000000
Can you tell me (and send to the bug too), how this line looks for
non-working and working kernels? Presumably the address at the end of
the line should be different.
There is nothing like the line you described in either bad or good
kernels here.
For the not-working kernel:
<snip>
SILO Version 1.4.12
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loading initial ramdisk (1051222 bytes at 0xF800000 phys, 0x40C00000
virt)...
/
Remapping the kernel... done.
Booting Linux...
NVRAM: Low battery voltage!
CLOCK: Clock was stopped. Kick start
</snip>
That is all. The block cursor sits on the same line 2 spaces after
the "start"
I will attach dmesg output from the good kernel in case it helps...
happy to do anything else that might help too
thanks
jim
PROMLIB: Sun IEEE Boot Prom 4.0.45 2001/02/08 14:33
Linux version 2.6.16-1-sparc64 (Debian 2.6.16-12) (waldi@debian.org) (gcc version 4.0.4 20060422 (prerelease) (Debian 4.0.3-2)) #2 Thu May 4 12:36:43 PDT 2006
ARCH: SUN4U
Ethernet address: 00:03:ba:04:a4:ab
On node 0 totalpages: 31988
DMA zone: 31988 pages, LIFO batch:7
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(262144):line_sz(64)]
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro
PID hash table entries: 1024 (order: 10, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 253416k available (2032k kernel code, 696k data, 136k init) [fffff80000000000,000000000ff24000]
Calibrating delay loop... 1001.47 BogoMIPS (lpj=2002944)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs... it is
Freeing initrd memory: 979k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI quirk: region 0800-083f claimed by ali7101 ACPI
PCI quirk: region 0600-061f claimed by ali7101 SMB
PCI-IRQ: Routing bus[ 0] slot[ 8] map[0] to INO[23]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI-IRQ: Routing bus[ 0] slot[13] map[0] to INO[0f]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom]
power: Control reg at 000001fe02000800 ... powerd running.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
audit: initializing netlink socket (disabled)
audit(1160755649.192:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 235 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
Console: switching to colour frame buffer device 160x64
atyfb: fb0: ATY Mach64 frame buffer device on PCI
rtc_init: no PC rtc found
[drm] Initialized drm 1.0.1 20051102
ttyS0 at MMIO 0x1fe020003f8 (irq = 7246432) is a 16550A
ttyS1 at MMIO 0x1fe020002e8 (irq = 7246432) is a 16550A
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
rtc_sun_init: Registered Mostek RTC driver.
usbmon: debugfs is not available
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
TCP established hash table entries: 8192 (order: 3, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0c.3: OHCI Host Controller
ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0c.3: irq 9,7e4, io mem 0x1ff02000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ALI15X3: IDE controller at PCI slot 0000:00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
usb 1-4: new low speed USB device using ohci_hcd and address 2
usb 1-4: configuration #1 chosen from 1 choice
input: HID 0430:0005 as /class/input/input0
input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:0c.3-4
hda: ST315320A, ATA DISK drive
hdb: LTN485S, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 4,7cc
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 29888820 sectors (15303 MB) w/2048KiB Cache, CHS=29651/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 hda5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 437421, addr: 1
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:04:a4:ab
eth0: Found Generic MII PHY
hdb: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10,7dc] MMIO=[1ff00420000-1ff004207ff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe04a4ab]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
eth0: Link is up at 10 Mbps, half-duplex.
Adding 511544k swap on /dev/hda4. Priority:-1 extents:1 across:511544k
EXT3 FS on hda2, internal journal
Probing IDE interface ide1...
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Link is up at 10 Mbps, half-duplex.
eth0: Pause is disabled
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Reply to: