Bug#494051: eeepc-acpi-modules-2.6.26-1-686 hangs and then oops when unloading
Package: eeepc-acpi-modules-2.6.26-1-686
Version: 2.6.26+1.0-1
Severity: important
Hi,
I just updated my EEEPC 701 to linux-2.6.26, using the
eeepc-acpi-modules-2.6.26-1-686 package.
It seemed to work like a charm, but after a while, Fn+F[1-9] shortcuts
don't work anymore.
A few tests later, it seems that if you press Fn+F3 (for eg.)
continuously, shortcuts don't work anymore, whereas if you use them
sparingly, it works OK.
When shortcuts are off, if I try to unload the eeepc-acpi module, I got
a segmentation fault (I join the dmesg message with the oops trace as an
attachment). Subsequent unloading leads to a 'Device or resource busy'
error message.
I can give you more informations if needed, if you tell me what you
need (and how I can give it to you, this if the first I report a bug
against a driver!)
Thanks,
Jonathan
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.iso885915, LC_CTYPE=en_US.iso885915 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages eeepc-acpi-modules-2.6.26-1-686 depends on:
ii linux-image-2.6.26-1-686 [lin 2.6.26-1 Linux 2.6.26 image on PPro/Celeron
eeepc-acpi-modules-2.6.26-1-686 recommends no packages.
eeepc-acpi-modules-2.6.26-1-686 suggests no packages.
-- no debconf information
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-1) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Jul 30 20:02:15 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f780000 (usable)
[ 0.000000] BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 128896) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128896
[ 0.000000] HighMem 128896 -> 128896
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128896
[ 0.000000] On node 0 totalpages: 128896
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123825 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1F780000, 0034 (r1 A M I OEMRSDT 1000808 MSFT 97)
[ 0.000000] ACPI: FACP 1F780200, 0081 (r1 A M I OEMFACP 1000808 MSFT 97)
[ 0.000000] ACPI: DSDT 1F780400, 5F2B (r1 A0797 A0797000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 1F790000, 0040
[ 0.000000] ACPI: APIC 1F780390, 0068 (r1 A M I OEMAPIC 1000808 MSFT 97)
[ 0.000000] ACPI: OEMB 1F790040, 0046 (r1 A M I AMI_OEM 1000808 MSFT 97)
[ 0.000000] ACPI: MCFG 1F786330, 003C (r1 A M I OEMMCFG 1000808 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127889
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 630.086 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 501212k/515584k available (1758k kernel code, 13824k reserved, 743k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB)
[ 0.004000] .init : 0xc0379000 - 0xc03b6000 ( 244 kB)
[ 0.004000] .data : 0xc02b78eb - 0xc0371620 ( 743 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02b78eb (1758 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084326] Calibrating delay using timer specific routine.. 1262.12 BogoMIPS (lpj=2524240)
[ 0.084416] Security Framework initialized
[ 0.084430] SELinux: Disabled at boot.
[ 0.084440] Capability LSM initialized
[ 0.084477] Mount-cache hash table entries: 512
[ 0.084831] Initializing cgroup subsys ns
[ 0.084842] Initializing cgroup subsys cpuacct
[ 0.084851] Initializing cgroup subsys devices
[ 0.084901] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084909] CPU: L2 cache: 512K
[ 0.084921] Intel machine check architecture supported.
[ 0.084933] Intel machine check reporting enabled on CPU#0.
[ 0.084962] Checking 'hlt' instruction... OK.
[ 0.101075] SMP alternatives: switching to UP code
[ 0.114915] Freeing SMP alternatives: 16k freed
[ 0.114924] ACPI: Core revision 20080321
[ 0.140008] ENABLING IO-APIC IRQs
[ 0.140008] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.179755] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 08
[ 0.180011] APIC calibration not consistent with PM Timer: 136ms instead of 100ms
[ 0.180011] APIC delta adjusted to PM-Timer: 437544 (595095)
[ 0.180011] Brought up 1 CPUs
[ 0.180011] Total of 1 processors activated (1262.12 BogoMIPS).
[ 0.180011] CPU0 attaching sched-domain:
[ 0.180011] domain 0: span 0
[ 0.180011] groups: 0
[ 0.180011] net_namespace: 660 bytes
[ 0.180011] Booting paravirtualized kernel on bare hardware
[ 0.180011] NET: Registered protocol family 16
[ 0.180011] ACPI: bus type pci registered
[ 0.180011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180011] PCI: Not using MMCONFIG.
[ 0.180011] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.180011] PCI: Using configuration type 1 for base access
[ 0.180011] Setting up standard PCI resources
[ 0.198820] ACPI: EC: Look up EC in DSDT
[ 0.220013] ACPI: Interpreter enabled
[ 0.220013] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.220013] ACPI: Using IOAPIC for interrupt routing
[ 0.220013] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.226173] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.226181] PCI: Using MMCONFIG for extended config space
[ 0.241262] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.241272] ACPI: EC: driver started in poll mode
[ 0.241625] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.242754] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.242771] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.242781] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.243327] PCI: Transparent bridge - 0000:00:1e.0
[ 0.243388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.244309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.244576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.256851] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.257242] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.257623] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.258002] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.258376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.258751] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.259127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.259510] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.260016] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.260124] pnp: PnP ACPI init
[ 0.260146] ACPI: bus type pnp registered
[ 0.266647] pnp: PnP ACPI: found 13 devices
[ 0.266656] ACPI: ACPI bus type pnp unregistered
[ 0.266668] PnPBIOS: Disabled by ACPI PNP
[ 0.267345] PCI: Using ACPI for IRQ routing
[ 0.268078] hpet clockevent registered
[ 0.268094] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.268107] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.269207] ACPI: RTC can wake from S4
[ 0.269288] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.269319] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.269328] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.269336] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.269344] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.269354] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.269363] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.269372] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.269390] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.269399] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.269421] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.269438] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.269456] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.269464] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.269473] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.269482] system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
[ 0.301465] PCI: Bridge: 0000:00:1c.0
[ 0.301473] IO window: disabled.
[ 0.301483] MEM window: disabled.
[ 0.301490] PREFETCH window: disabled.
[ 0.301501] PCI: Bridge: 0000:00:1c.1
[ 0.301505] IO window: disabled.
[ 0.301515] MEM window: 0xfbf00000-0xfbffffff
[ 0.301523] PREFETCH window: disabled.
[ 0.301533] PCI: Bridge: 0000:00:1c.2
[ 0.301538] IO window: disabled.
[ 0.301547] MEM window: 0xf8000000-0xfbefffff
[ 0.301556] PREFETCH window: 0x00000000f0000000-0x00000000f6ffffff
[ 0.301568] PCI: Bridge: 0000:00:1e.0
[ 0.301572] IO window: disabled.
[ 0.301581] MEM window: disabled.
[ 0.301588] PREFETCH window: disabled.
[ 0.301638] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.301653] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.301683] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.301696] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.301726] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.301738] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.301756] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.301824] NET: Registered protocol family 2
[ 0.302080] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.302581] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.302853] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.303112] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.303119] TCP reno registered
[ 0.303336] NET: Registered protocol family 1
[ 0.303646] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.048046] it is
[ 1.860647] Freeing initrd memory: 6114k freed
[ 1.862233] audit: initializing netlink socket (disabled)
[ 1.862273] type=2000 audit(1218062791.860:1): initialized
[ 1.862560] Total HugeTLB memory allocated, 0
[ 1.862753] VFS: Disk quotas dquot_6.5.1
[ 1.862829] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.862925] msgmni has been set to 991
[ 1.863235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.863245] io scheduler noop registered
[ 1.863251] io scheduler anticipatory registered
[ 1.863257] io scheduler deadline registered
[ 1.863290] io scheduler cfq registered (default)
[ 1.863325] pci 0000:00:02.0: Boot video device
[ 1.863697] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.863753] assign_interrupt_mode Found MSI capability
[ 1.863811] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.863933] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.864065] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.864255] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.864306] assign_interrupt_mode Found MSI capability
[ 1.864358] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.864471] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.864580] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.864759] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.864810] assign_interrupt_mode Found MSI capability
[ 1.864862] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.865012] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.865119] Allocate Port Service[0000:00:1c.2:pcie03]
[ 1.865955] isapnp: Scanning for PnP cards...
[ 2.220114] isapnp: No Plug & Play device found
[ 2.227361] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.233025] brd: module loaded
[ 2.233300] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.266025] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.266047] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.266494] mice: PS/2 mouse device common for all mice
[ 2.266617] cpuidle: using governor ladder
[ 2.266624] cpuidle: using governor menu
[ 2.266636] No iBFT detected.
[ 2.267724] TCP cubic registered
[ 2.267735] NET: Registered protocol family 17
[ 2.267749] Using IPI No-Shortcut mode
[ 2.268129] registered taskstats version 1
[ 2.268419] Freeing unused kernel memory: 244k freed
[ 2.290358] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.491304] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.491433] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.491446] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.496523] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 2.496523] Marking TSC unstable due to: TSC halts in idle.
[ 2.752686] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 2.760191] ACPI: Thermal Zone [TZ00] (50 C)
[ 2.769255] Clocksource tsc unstable (delta = -262979858 ns)
[ 4.307199] usbcore: registered new interface driver usbfs
[ 4.307277] usbcore: registered new interface driver hub
[ 4.307374] usbcore: registered new device driver usb
[ 4.324308] USB Universal Host Controller Interface driver v3.0
[ 4.324417] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 4.324439] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.324449] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.324755] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.324813] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 4.325048] usb usb1: configuration #1 chosen from 1 choice
[ 4.325129] hub 1-0:1.0: USB hub found
[ 4.325151] hub 1-0:1.0: 2 ports detected
[ 4.407928] No dock devices found.
[ 4.428846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.428861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.428870] usb usb1: Product: UHCI Host Controller
[ 4.428876] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.428882] usb usb1: SerialNumber: 0000:00:1d.0
[ 4.428978] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.429009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.429018] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.429080] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.429141] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 4.429336] usb usb2: configuration #1 chosen from 1 choice
[ 4.429413] hub 2-0:1.0: USB hub found
[ 4.429432] hub 2-0:1.0: 2 ports detected
[ 4.532348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.532360] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.532368] usb usb2: Product: UHCI Host Controller
[ 4.532374] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.532380] usb usb2: SerialNumber: 0000:00:1d.1
[ 4.532474] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.532499] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.532508] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.532578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.532641] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 4.532854] usb usb3: configuration #1 chosen from 1 choice
[ 4.532935] hub 3-0:1.0: USB hub found
[ 4.532954] hub 3-0:1.0: 2 ports detected
[ 4.543408] SCSI subsystem initialized
[ 4.636327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.636342] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.636351] usb usb3: Product: UHCI Host Controller
[ 4.636357] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.636363] usb usb3: SerialNumber: 0000:00:1d.2
[ 4.636458] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 4.636482] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.636492] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.636555] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.636616] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 4.636820] usb usb4: configuration #1 chosen from 1 choice
[ 4.636904] hub 4-0:1.0: USB hub found
[ 4.636922] hub 4-0:1.0: 2 ports detected
[ 4.668980] libata version 3.00 loaded.
[ 4.740325] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.740337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.740348] usb usb4: Product: UHCI Host Controller
[ 4.740354] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.740360] usb usb4: SerialNumber: 0000:00:1d.3
[ 4.742695] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 4.742732] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.742742] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.742830] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.746770] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.746782] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.746800] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 4.760064] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.760297] usb usb5: configuration #1 chosen from 1 choice
[ 4.760387] hub 5-0:1.0: USB hub found
[ 4.760410] hub 5-0:1.0: 8 ports detected
[ 4.864355] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.864367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.864375] usb usb5: Product: EHCI Host Controller
[ 4.864381] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 4.864387] usb usb5: SerialNumber: 0000:00:1d.7
[ 4.865101] ata_piix 0000:00:1f.2: version 2.12
[ 4.865153] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.865168] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.865259] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.865423] scsi0 : ata_piix
[ 4.865645] scsi1 : ata_piix
[ 4.869840] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.869849] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.196433] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
[ 5.196447] ata2.00: 7815024 sectors, multi 0: LBA
[ 5.212370] ata2.00: configured for UDMA/66
[ 5.212655] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 5.242562] Uniform Multi-Platform E-IDE driver
[ 5.242576] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.260086] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 5.300252] Driver 'sd' needs updating - please use bus_type methods
[ 5.300512] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 5.300562] sd 1:0:0:0: [sda] Write Protect is off
[ 5.300570] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.300653] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.300832] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 5.300877] sd 1:0:0:0: [sda] Write Protect is off
[ 5.300888] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.300972] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.300988] sda: sda1
[ 5.302391] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.397773] usb 5-5: configuration #1 chosen from 1 choice
[ 5.399423] usb 5-5: New USB device found, idVendor=0951, idProduct=1606
[ 5.399435] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 5.399443] usb 5-5: Product: UB6225
[ 5.399449] usb 5-5: Manufacturer: ENE
[ 5.399454] usb 5-5: SerialNumber: 146030377350
[ 5.456077] Initializing USB Mass Storage driver...
[ 5.636064] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 5.769408] usb 5-8: configuration #1 chosen from 1 choice
[ 5.770072] usb 5-8: New USB device found, idVendor=eb1a, idProduct=2761
[ 5.770082] usb 5-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.770399] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.770730] usbcore: registered new interface driver usb-storage
[ 5.770739] USB Mass Storage support registered.
[ 5.771955] usb-storage: device found at 2
[ 5.771963] usb-storage: waiting for device to settle before scanning
[ 6.104274] udevd version 125 started
[ 8.846044] Linux agpgart interface v0.103
[ 8.867165] Atheros(R) L2 Ethernet Driver - version 2.0.3
[ 8.867174] Copyright (c) 2007 Atheros Corporation.
[ 8.867255] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 8.867277] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 8.940498] agpgart: Detected an Intel 915GM Chipset.
[ 8.940839] agpgart: Detected 7932K stolen memory.
[ 8.972644] agpgart: AGP aperture is 256M @ 0xd0000000
[ 10.627952] eeepc: Eee PC Hotkey Driver
[ 10.628224] eeepc: Hotkey init flags 0x41
[ 10.629468] eeepc: Get control methods supported: 0x101711
[ 10.686150] input: Power Button (FF) as /class/input/input1
[ 10.711126] ACPI: Power Button (FF) [PWRF]
[ 10.711348] input: Lid Switch as /class/input/input2
[ 10.737270] ACPI: Lid Switch [LID]
[ 10.737477] input: Sleep Button (CM) as /class/input/input3
[ 10.764686] ACPI: Sleep Button (CM) [SLPB]
[ 10.764834] input: Power Button (CM) as /class/input/input4
[ 10.768385] usb-storage: device scan complete
[ 10.796722] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 10.798709] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.805114] ACPI: Power Button (CM) [PWRB]
[ 11.098786] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.098840] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.752313] ACPI: AC Adapter [AC0] (on-line)
[ 13.303081] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 13.394777] ACPI: Battery Slot [BAT0] (battery present)
[ 13.936868] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.937045] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 13.937098] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.067331] input: Video Bus as /class/input/input5
[ 14.081058] input: PC Speaker as /class/input/input6
[ 14.094671] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.383067] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.531211] Linux video capture interface: v2.00
[ 14.570538] intel_rng: FWH not detected
[ 14.570890] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 14.606985] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[ 14.615814] input: UVC Camera (eb1a:2761) as /class/input/input7
[ 14.626312] usbcore: registered new interface driver uvcvideo
[ 14.626327] USB Video Class driver (v0.1.0)
[ 15.013183] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 15.013223] rtc0: alarms up to one month
[ 15.974885] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 16.060009] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 19.508164] loop: AES key scrubbing enabled
[ 19.508847] loop: loaded (max 8 devices)
[ 19.609545] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 19.721989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.729271] pciehp: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0
[ 19.729448] Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
[ 19.729476] pciehp: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0
[ 20.732047] pciehp: Device 0000:03:00.0 already exists at 3:0, cannot hot-add
[ 20.732204] pciehp: Cannot add device 0x3:0
[ 21.736049] Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
[ 21.736104] pciehp: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0
[ 21.736230] Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
[ 21.736263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 22.201062] Adding 262136k swap on /swap.file. Priority:-1 extents:138 across:278372k
[ 23.998632] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 25.565670] NET: Registered protocol family 10
[ 25.566727] lo: Disabled Privacy Extensions
[ 30.802280] [drm] Initialized drm 1.1.0 20060810
[ 30.812641] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.812670] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.812880] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 35.988024] eth0: no IPv6 routers present
[ 124.929309] BUG: unable to handle kernel NULL pointer dereference at 000000ec
[ 124.929309] IP: [<c02a9cb6>] klist_del+0x9/0x31
[ 124.929309] *pde = 00000000
[ 124.929309] Oops: 0000 [#1] SMP
[ 124.929309] Modules linked in: i915 drm ipv6 eeepc_acpi(-) pciehp pci_hotplug cpufreq_ondemand p4_clockmod speedstep_lib freq_table loop joydev psmouse rtc_cmos rtc_core rtc_lib serio_raw uvcvideo compat_ioctl32 i2c_i801 rng_core videodev v4l1_compat i2c_core pcspkr video output iTCO_wdt battery ac snd_hda_intel snd_pcm_oss snd_mixer_oss button eeepc_laptop snd_pcm snd_timer intel_agp atl2 snd agpgart soundcore snd_page_alloc evdev ext2 mbcache usb_storage sd_mod ide_pci_generic ide_core ata_generic ahci ata_piix libata scsi_mod dock ehci_hcd uhci_hcd usbcore thermal processor fan thermal_sys
[ 124.929309]
[ 124.929309] Pid: 2533, comm: rmmod Not tainted (2.6.26-1-686 #1)
[ 124.929309] EIP: 0060:[<c02a9cb6>] EFLAGS: 00010282 CPU: 0
[ 124.929309] EIP is at klist_del+0x9/0x31
[ 124.929309] EAX: 000000dc EBX: 000000dc ECX: 00000246 EDX: c032834d
[ 124.929309] ESI: 00000000 EDI: de2429f8 EBP: dd8f4000 ESP: dd8f5f30
[ 124.929309] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 124.929309] Process rmmod (pid: 2533, ti=dd8f4000 task=dec9fa00 task.ti=dd8f4000)
[ 124.929309] Stack: de2429f8 00000000 c0356ea0 c02a9d2e e033c350 c023990f e033c380 00000000
[ 124.929309] 00000880 e033b6d2 c013fc1b 70656565 63615f63 00006970 d954e1d0 00000000
[ 124.929309] d954e1d0 c016568d dd99ae40 d954e1d0 c0166004 ffffffff b7ee6000 b7ee7000
[ 124.929309] Call Trace:
[ 124.929309] [<c02a9d2e>] klist_remove+0x8/0x13
[ 124.929309] [<c023990f>] bus_remove_driver+0x59/0x7e
[ 124.929309] [<e033b6d2>] eeepc_hotk_exit+0xa/0x1a [eeepc_acpi]
[ 124.929309] [<c013fc1b>] sys_delete_module+0x194/0x1dd
[ 124.929309] [<c016568d>] remove_vma+0x3e/0x43
[ 124.929309] [<c0166004>] do_munmap+0x181/0x19b
[ 124.929309] [<c0103863>] sysenter_past_esp+0x78/0xb1
[ 124.929309] [<c02b0000>] init_intel_cacheinfo+0x95/0x467
[ 124.929309] =======================
[ 124.929309] Code: f3 ff 8b 04 24 89 46 08 8b 06 90 fe 00 85 ed 74 08 85 ff 74 04 89 f8 ff d5 8b 04 24 5a 5b 5e 5f 5d c3 57 89 c7 56 53 8b 18 89 d8 <8b> 73 10 e8 28 cc 00 00 89 f8 e8 70 ff ff ff 85 c0 b8 00 00 00
[ 124.929309] EIP: [<c02a9cb6>] klist_del+0x9/0x31 SS:ESP 0068:dd8f5f30
[ 124.929309] ---[ end trace baf82ae34250fbc9 ]---
Reply to: