[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#563605: marked as done (linux-image-2.6.32-trunk-amd64: Intel VT flags missing on Q45 chipset)

Your message dated Mon, 1 Feb 2010 08:47:07 +0000
with message-id <20100201084707.GA4174@lupin.powdarrmonkey.net>
and subject line Re: Bug#563605: linux-image-2.6.32-trunk-amd64: Intel VT flags missing on Q45 chipset
has caused the Debian Bug report #563605,
regarding linux-image-2.6.32-trunk-amd64: Intel VT flags missing on Q45 chipset
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
563605: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=563605
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.32-3
Severity: normal

I don't seem to have the CPU flags for Intel virtualisation from the processor
to run KVM, Xen and friends. I double-checked the BIOS and virtualisation
is enabled (it's a Q45 chipset with a Core2Duo E7400 processor, and a recent
BIOS).

I'm happy to include other information or try things if you direct me, since my
kernel experience is limited. I did wonder if I needed to load a module.

Thanks.



-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-3) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sat Dec 26 17:13:29 UTC 2009

** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=UUID=674d09bc-8ab6-4744-8b4f-b1e5c3a61e54 ro quiet

** Not tainted

** Kernel log:
[    4.788413] EXT3-fs: mounted filesystem with ordered data mode.
[    5.806669] udev: starting version 149
[    6.013774] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.123250] ACPI: SSDT 00000000bd94cc18 002CC (v01    AMI      IST 00000001 MSFT 03000001)
[    6.123774] Marking TSC unstable due to TSC halts in idle
[    6.123848] processor LNXCPU:00: registered as cooling_device0
[    6.124084] processor LNXCPU:01: registered as cooling_device1
[    6.124387] Switching to clocksource acpi_pm
[    6.329255] cfg80211: Using static regulatory domain info
[    6.329257] cfg80211: Regulatory domain: US
[    6.329258] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.329260] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    6.329262] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329264] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329266] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329267] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.329269] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    6.329405] cfg80211: Calling CRDA for country: US
[    6.353684] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.560504] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[    6.631671] phy0: Selected rate control algorithm 'minstrel'
[    6.632129] Registered led device: b43-phy0::tx
[    6.632141] Registered led device: b43-phy0::rx
[    6.632153] Registered led device: b43-phy0::radio
[    6.632193] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
[    6.822503] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.822559] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.248960] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    7.682349] EXT3 FS on sdb2, internal journal
[    7.752849] loop: module loaded
[    7.975459] kjournald starting.  Commit interval 5 seconds
[    7.975619] EXT3 FS on sda1, internal journal
[    7.975625] EXT3-fs: mounted filesystem with ordered data mode.
[    8.049323] kjournald starting.  Commit interval 5 seconds
[    8.049473] EXT3 FS on sdb5, internal journal
[    8.049477] EXT3-fs: mounted filesystem with ordered data mode.
[    8.072441] kjournald starting.  Commit interval 5 seconds
[    8.072669] EXT3 FS on sdb6, internal journal
[    8.072673] EXT3-fs: mounted filesystem with ordered data mode.
[    8.112049] kjournald starting.  Commit interval 5 seconds
[    8.112062] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[    8.112271] EXT3 FS on sdb7, internal journal
[    8.112274] EXT3-fs: mounted filesystem with ordered data mode.
[    8.145522] kjournald starting.  Commit interval 5 seconds
[    8.145773] EXT3 FS on sdb8, internal journal
[    8.145775] EXT3-fs: mounted filesystem with ordered data mode.
[    9.524042] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[    9.564087] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[    9.572774] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[    9.576175] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[    9.700047] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[    9.816622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.000361] wlan0: direct probe to AP 00:19:cb:01:96:ed (try 1)
[   10.002323] wlan0: direct probe responded
[   10.002325] wlan0: authenticate with AP 00:19:cb:01:96:ed (try 1)
[   10.004194] wlan0: authenticated
[   10.004203] wlan0: associate with AP 00:19:cb:01:96:ed (try 1)
[   10.006430] wlan0: RX AssocResp from 00:19:cb:01:96:ed (capab=0x431 status=0 aid=1)
[   10.006431] wlan0: associated
[   10.007194] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   10.024035] cfg80211: Calling CRDA for country: AU
[   13.294481] fuse init (API version 7.13)
[   20.340019] wlan0: no IPv6 routers present
[   23.519811] Bluetooth: Core ver 2.15
[   23.519883] NET: Registered protocol family 31
[   23.519885] Bluetooth: HCI device and connection manager initialized
[   23.519888] Bluetooth: HCI socket layer initialized
[   23.555228] Bluetooth: L2CAP ver 2.14
[   23.555231] Bluetooth: L2CAP socket layer initialized
[   23.570446] Bluetooth: RFCOMM TTY layer initialized
[   23.570451] Bluetooth: RFCOMM socket layer initialized
[   23.570453] Bluetooth: RFCOMM ver 1.11
[   23.626561] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.626565] Bluetooth: BNEP filters: protocol multicast
[   23.645058] Bridge firewalling registered
[   23.669646] Bluetooth: SCO (Voice Link) ver 0.6
[   23.669648] Bluetooth: SCO socket layer initialized
[   25.302901] lp: driver loaded but no devices found
[   25.308289] ppdev: user-space parallel port driver
[   27.095908] [drm] Initialized drm 1.1.0 20060810
[   27.201428] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   27.201432] pci 0000:00:02.0: setting latency timer to 64
[   27.215799] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[   27.215802] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   27.215864]   alloc irq_desc for 26 on node -1
[   27.215866]   alloc kstat_irqs on node -1
[   27.215874] pci 0000:00:02.0: irq 26 for MSI/MSI-X
[   27.215955] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20090903/video-1882)
[   27.216026] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   27.216060] ACPI: Video Device [GFX0] (multi-head: no  rom: yes  post: no)
[   27.216074] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.369374] lo: Disabled Privacy Extensions
[   39.021077] CPU0 attaching NULL sched-domain.
[   39.021083] CPU1 attaching NULL sched-domain.
[   39.032097] CPU0 attaching sched-domain:
[   39.032101]  domain 0: span 0-1 level MC
[   39.032103]   groups: 0 1
[   39.032110] CPU1 attaching sched-domain:
[   39.032112]  domain 0: span 0-1 level MC
[   39.032114]   groups: 1 0

** Model information
sys_vendor:         
product_name:         
product_version:         
chassis_vendor:         
chassis_version:         
bios_vendor: Intel Corp.
bios_version: CBQ4510H.86A.0093.2009.0724.1353
board_vendor: Intel Corporation
board_name: DQ45CB
board_version: AAE30148-205

** Loaded modules:
Module                  Size  Used by
i915                  247359  2 
drm_kms_helper         18883  1 i915
drm                   137190  4 i915,drm_kms_helper
i2c_algo_bit            4225  1 i915
ppdev                   5030  0 
lp                      7462  0 
parport                27938  2 ppdev,lp
sco                     7193  2 
bridge                 39582  0 
stp                     1440  1 bridge
bnep                    9395  2 
rfcomm                 29501  0 
l2cap                  24656  4 bnep,rfcomm
crc16                   1319  1 l2cap
bluetooth              41795  6 sco,bnep,rfcomm,l2cap
acpi_cpufreq            5555  0 
cpufreq_powersave        902  0 
cpufreq_conservative     5162  0 
cpufreq_stats           2659  0 
cpufreq_userspace       1992  0 
binfmt_misc             6431  1 
fuse                   50078  1 
ext2                   52969  1 
coretemp                4165  0 
lm85                   18977  0 
hwmon_vid               1828  1 lm85
firewire_sbp2          11450  0 
loop                   11767  0 
snd_hda_codec_analog    64530  1 
snd_hda_intel          17851  1 
snd_hda_codec          52900  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               5364  1 snd_hda_codec
snd_pcm_oss            32415  0 
snd_mixer_oss          12606  1 snd_pcm_oss
snd_pcm                60615  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            4208  0 
snd_rawmidi            15291  1 snd_seq_midi
snd_seq_midi_event      4628  1 snd_seq_midi
snd_seq                42769  2 snd_seq_midi,snd_seq_midi_event
snd_timer              15502  2 snd_pcm,snd_seq
arc4                    1274  2 
snd_seq_device          4477  3 snd_seq_midi,snd_rawmidi,snd_seq
ecb                     1841  2 
b43                   144517  0 
rng_core                2990  2 b43
mac80211              135183  1 b43
snd                    44718  13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               4614  1 snd
i2c_i801                7590  0 
i2c_core               15584  5 i915,drm,i2c_algo_bit,lm85,i2c_i801
cfg80211              101285  2 b43,mac80211
rfkill                 12996  3 bluetooth,cfg80211
led_class               2401  1 b43
snd_page_alloc          6217  2 snd_hda_intel,snd_pcm
joydev                  8411  0 
processor              29479  3 acpi_cpufreq
evdev                   7336  19 
pcspkr                  1699  0 
serio_raw               3752  0 
psmouse                36039  0 
ext3                  106454  6 
jbd                    37037  1 ext3
mbcache                 4970  2 ext2,ext3
dm_mod                 53658  0 
usbhid                 31196  0 
hid                    62745  1 usbhid
sg                     18728  0 
sr_mod                 12602  0 
sd_mod                 29673  9 
crc_t10dif              1276  1 sd_mod
cdrom                  29399  1 sr_mod
ide_pci_generic         2788  0 
ide_core               76802  1 ide_pci_generic
uhci_hcd               18457  0 
ata_generic             2983  0 
ahci                   31494  7 
intel_agp              25521  1 
ata_piix               19757  0 
video                  17445  1 i915
output                  1692  1 video
agpgart                24733  3 drm,intel_agp
e1000e                109871  0 
libata                131655  3 ata_generic,ahci,ata_piix
button                  4618  1 i915
ehci_hcd               30578  0 
firewire_ohci          19436  0 
firewire_core          36560  2 firewire_sbp2,firewire_ohci
crc_itu_t               1307  1 firewire_core
ssb                    34873  1 b43
pcmcia                 19426  2 b43,ssb
pcmcia_core            24054  3 b43,ssb,pcmcia
scsi_mod              121909  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore               121559  4 usbhid,uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
thermal                11674  0 
fan                     3346  0 
thermal_sys            11878  4 processor,video,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f220 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d062a000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 10
	Region 0: I/O ports at f210 [size=8]
	Region 1: I/O ports at f200 [size=4]
	Region 2: I/O ports at f1f0 [size=8]
	Region 3: I/O ports at f1e0 [size=4]
	Region 4: I/O ports at f1d0 [size=16]
	Capabilities: <access denied>

00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at f1c0 [size=8]
	Region 1: Memory at d0629000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at d0600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at d0628000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f100 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at f0e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at f0c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at f0a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at d0627000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at d0620000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at f080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at f060 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at f040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d0626000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: d0500000-d05fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 25
	Region 0: I/O ports at f1b0 [size=8]
	Region 1: I/O ports at f1a0 [size=4]
	Region 2: I/O ports at f190 [size=8]
	Region 3: I/O ports at f180 [size=4]
	Region 4: I/O ports at f020 [size=32]
	Region 5: Memory at d0625000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at d0624000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f000 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at f170 [size=8]
	Region 1: I/O ports at f160 [size=4]
	Region 2: I/O ports at f150 [size=8]
	Region 3: I/O ports at f140 [size=4]
	Region 4: I/O ports at f130 [size=16]
	Region 5: I/O ports at f120 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
	Subsystem: Belkin F5D7000uk 54G Wireless Network Card [1799:7000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=8K]
	Kernel driver in use: b43-pci-bridge

01:01.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
	Subsystem: Intel Corporation Device [8086:1003]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at d0503000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at d0502000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci


** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:00e3 Microsoft Corp. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.28     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.11-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii  firmware-linux-free           2.6.32-3   Binary firmware for various driver

Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
  linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
  linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
  linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:

--- End Message ---
--- Begin Message --- 
On Tue, Jan 05, 2010 at 02:53:57AM +0000, Ben Hutchings wrote:
> According to <http://ark.intel.com/Product.aspx?id=36500#specs>, there
> are some variants of the E7400 which do not support VT-x.  These are
> distinguished by 'Ordering Code' and 'SPEC Code'; I assume one or both
> of these codes are shown on the processor packaging.  Please check
> whether you have one of these variants.

Sadly I can't find the original box (I suspect it's been thrown away in a
fit of tidying over the holiday) so I can't be sure about which processor I
have, but looking at the original invoice there's a good chance it's the
cheapest of the lot, which doesn't have vmx.

Thanks for the specs page, which I hadn't seen, and sorry for wasting your
time,

-- 
Jonathan Wiltshire

1024D: 0xDB800B52 / 4216 F01F DCA9 21AC F3D3  A903 CA6B EA3E DB80 0B52
4096R: 0xD3524C51 / 0A55 B7C5 1223 3942 86EC  74C3 5394 479D D352 4C51

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: