Package: src:linux
Version: 3.9.8-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
3.9.8-1 freezes the host when an Ubuntu 12.04 32-bit or 64-bit guest VM using
libvirt/KVM attempts to go through the virtual network bridge using the virtio
adapter. This freeze is reproducible 100% of the time. The guest is using the
default libvirt network setup (NAT'ed with the virtual bridge virbr0, virtio
network adapter) so nothing is strange there. I have not yet seen a panic.
This issue is not present with the previous version of linux-image-3.9-1:
3.9.6-1
This issue is not present if you select a different type of network adapter
(e.g. e1000).
If it helps, the version of libvirt is the latest from testing: libvirt-
bin/libvirt0 0.9.12-11+deb7u1
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (
debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
root=UUID=3feee5b3-a3ec-4889-bce2-ff6aad370844 ro vga=791
** Not tainted
** Kernel log:
[ 8.317763] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 8.317766] nouveau [ DRM] DCB outp 01: 02011300 00000028
[ 8.317769] nouveau [ DRM] DCB outp 02: 02022386 0f200010
[ 8.317772] nouveau [ DRM] DCB outp 03: 02022332 00020010
[ 8.317775] nouveau [ DRM] DCB outp 04: 040333a6 0f200010
[ 8.317778] nouveau [ DRM] DCB outp 05: 04033312 00020010
[ 8.317781] nouveau [ DRM] DCB conn 00: 00000041
[ 8.317784] nouveau [ DRM] DCB conn 01: 00000100
[ 8.317787] nouveau [ DRM] DCB conn 02: 00005246
[ 8.317790] nouveau [ DRM] DCB conn 03: 0000a346
[ 8.326487] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.331358] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.331362] [drm] No driver support for vblank timestamp query.
[ 8.331366] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 8.331523] nouveau [ DRM] 4 available performance level(s)
[ 8.331528] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100%
[ 8.331533] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 250MHz voltage 900mV fanspeed 100%
[ 8.331538] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 400MHz voltage 1090mV fanspeed 100%
[ 8.331543] nouveau [ DRM] 3: core 580MHz shader 1450MHz memory 400MHz voltage 1170mV fanspeed 100%
[ 8.331548] nouveau [ DRM] c: core 275MHz shader 550MHz memory 249MHz voltage 900mV
[ 8.349668] nouveau [ DRM] MM: using M2MF for buffer copies
[ 8.362467] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:e8:94:c8:ae
[ 8.362472] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 8.362505] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1004FF-0FF
[ 8.447002] nouveau [ DRM] allocated 1600x1200 fb: 0x60000, bo ffff88011582cc00
[ 8.447074] fbcon: nouveaufb (fb0) is primary device
[ 8.499105] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 8.519444] Console: switching to colour frame buffer device 200x75
[ 8.522617] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 8.522641] nouveau 0000:01:00.0: registered panic notifier
[ 8.522666] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 8.531982] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.543364] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.543430] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.543495] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.543558] input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.572040] usb 7-3: new high-speed USB device number 2 using ehci-pci
[ 8.704478] usb 7-3: New USB device found, idVendor=413c, idProduct=2513
[ 8.704522] usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.705056] hub 7-3:1.0: USB hub found
[ 8.705217] hub 7-3:1.0: 3 ports detected
[ 8.816044] usb 7-4: new high-speed USB device number 3 using ehci-pci
[ 8.855403] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 8.872584] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 8.948438] usb 7-4: New USB device found, idVendor=413c, idProduct=2513
[ 8.948455] usb 7-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.948736] hub 7-4:1.0: USB hub found
[ 8.948818] hub 7-4:1.0: 3 ports detected
[ 9.448037] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 9.625081] usb 3-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 9.625100] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.625114] usb 3-1: Product: 5880
[ 9.625126] usb 3-1: Manufacturer: Broadcom Corp
[ 9.625134] usb 3-1: SerialNumber: 0123456789ABCD
[ 9.625254] usb 3-1: config 0 descriptor??
[ 9.708206] usb 7-4.1: new low-speed USB device number 5 using ehci-pci
[ 9.825936] usb 7-4.1: New USB device found, idVendor=10d5, idProduct=5000
[ 9.825959] usb 7-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.825967] usb 7-4.1: Product: Combo Free KVM
[ 9.825972] usb 7-4.1: Manufacturer: No brand
[ 10.210228] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.245018] usbcore: registered new interface driver usbhid
[ 10.245030] usbhid: USB HID core driver
[ 10.250034] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.1/7-4.1:1.0/input/input14
[ 10.250153] hid-generic 0003:10D5:5000.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand Combo Free KVM] on usb-0000:00:1a.7-4.1/input0
[ 10.250651] input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4.1/7-4.1:1.1/input/input15
[ 10.250861] hid-generic 0003:10D5:5000.0002: input,hidraw1: USB HID v1.10 Mouse [No brand Combo Free KVM] on usb-0000:00:1a.7-4.1/input1
[ 11.775303] EXT3-fs (sda1): using internal journal
[ 12.256067] fuse init (API version 7.21)
[ 12.321024] loop: module loaded
[ 12.598053] bio: create slab <bio-1> at 1
[ 13.002285] Adding 4194300k swap on /dev/mapper/vg-swap. Priority:-1 extents:1 across:4194300k
[ 14.330204] kjournald starting. Commit interval 5 seconds
[ 14.330693] EXT3-fs (dm-1): using internal journal
[ 14.330698] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 15.089483] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.182942] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.563859] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 16.664129] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 16.664292] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.249798] lp0: using parport0 (interrupt-driven).
[ 18.290586] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 18.555529] ppdev: user-space parallel port driver
[ 19.652905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 19.653054] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.101837] Bridge firewalling registered
[ 22.162302] tun: Universal TUN/TAP device driver, 1.6
[ 22.162750] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 22.184157] device virbr0-nic entered promiscuous mode
[ 22.758983] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 26.038861] Ebtables v2.0 registered
[ 26.179325] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 106.004234] device vnet0 entered promiscuous mode
[ 106.018733] virbr0: topology change detected, propagating
[ 106.018738] virbr0: port 2(vnet0) entered forwarding state
[ 106.018746] virbr0: port 2(vnet0) entered forwarding state
[ 106.018804] IPv6: ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
[ 168.981852] virbr0: port 2(vnet0) entered disabled state
[ 168.982317] device vnet0 left promiscuous mode
[ 168.982320] virbr0: port 2(vnet0) entered disabled state
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A14
board_vendor: Dell Inc.
board_name: 0G868N
board_version:
** Loaded modules:
ip6table_filter
ip6_tables
ebtable_nat
ebtables
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
ipt_REJECT
xt_CHECKSUM
iptable_mangle
xt_tcpudp
tun
bridge
stp
llc
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
ppdev
lp
binfmt_misc
uinput
xt_limit
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
ip_tables
x_tables
loop
firewire_sbp2
fuse
dm_crypt
hid_generic
usbhid
hid
joydev
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
arc4
iwldvm
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
nouveau
mxm_wmi
e1000e
ttm
drm_kms_helper
ehci_pci
uhci_hcd
sg
mac80211
iTCO_wdt
ehci_hcd
coretemp
drm
snd_seq_device
sdhci_pci
usbcore
snd_timer
sdhci
kvm_intel
iTCO_vendor_support
sr_mod
i2c_algo_bit
acpi_cpufreq
mperf
mmc_core
firewire_ohci
firewire_core
cdrom
crc_itu_t
iwlwifi
snd
ptp
processor
kvm
parport_pc
parport
lpc_ich
mfd_core
usb_common
psmouse
pps_core
dell_laptop
dell_wmi
pcspkr
i2c_i801
i2c_core
soundcore
video
sparse_keymap
cfg80211
rfkill
serio_raw
wmi
battery
button
ac
evdev
dcdbas
ext3
mbcache
jbd
dm_mod
sd_mod
crc_t10dif
ahci
libahci
thermal
libata
thermal_sys
microcode
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f09fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f1c00000-f1efffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: f1b00000-f1bfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS 160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1bff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1bff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1bff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 003 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 007 Device 002: ID 413c:2513 Dell Computer Corp. internal USB Hub of E-Port Replicator
Bus 007 Device 003: ID 413c:2513 Dell Computer Corp. internal USB Hub of E-Port Replicator
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 005: ID 10d5:5000 Uni Class Technology Co., Ltd
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false