--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: ov519 fails to handle Hercules Deluxe webcam
- From: Skippy le Grand Gourou <lecotegougdelaforce@free.fr>
- Date: Sun, 04 Mar 2012 23:32:39 +0100
- Message-id: <20120304223239.22117.54556.reportbug@deepthought>
Package: linux-2.6
Version: 2.6.32-41
Severity: normal
Hercules Deluxe USB webcam won't work, see the end of the kernel log.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 11 12:29:30 UTC 2012
** Command line:
root=/dev/sda2 ro quiet vga=791 edd=off
** Not tainted
** Kernel log:
[491441.842432] CPU2 attaching sched-domain:
[491441.842433] domain 0: span 0,2 level SIBLING
[491441.842435] groups: group c320370c cpus 2 (cpu_power = 589) group c300370c cpus 0 (cpu_power = 589)
[491441.842437] domain 1: span 0-3 level MC
[491441.842438] groups: group c3003778 cpus 0,2 (cpu_power = 1178) group c3103778 cpus 1,3 (cpu_power = 1178)
[491441.842442] CPU3 attaching sched-domain:
[491441.842443] domain 0: span 1,3 level SIBLING
[491441.842444] groups: group c330370c cpus 3 (cpu_power = 589) group c310370c cpus 1 (cpu_power = 589)
[491441.842447] domain 1: span 0-3 level MC
[491441.842448] groups: group c3103778 cpus 1,3 (cpu_power = 1178) group c3003778 cpus 0,2 (cpu_power = 1178)
[519546.470541] mtrr: no MTRR for c0000000,3ff0000 found
[521029.753152] usb 3-1.3: USB disconnect, address 8
[521029.753393] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[521029.753412] ftdi_sio 3-1.3:1.1: device disconnected
[521029.953358] usb 3-1.3: new full speed USB device using ehci_hcd and address 9
[521030.052884] usb 3-1.3: New USB device found, idVendor=9e88, idProduct=9e8f
[521030.052888] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[521030.052891] usb 3-1.3: Product: SheevaPlug JTAGKey FT2232D B
[521030.052894] usb 3-1.3: Manufacturer: FTDI
[521030.052896] usb 3-1.3: SerialNumber: FTTIQ4WN
[521030.052986] usb 3-1.3: configuration #1 chosen from 1 choice
[521030.056282] usb 3-1.3: Ignoring serial port reserved for JTAG
[521030.059523] ftdi_sio 3-1.3:1.1: FTDI USB Serial Device converter detected
[521030.059552] usb 3-1.3: Detected FT2232C
[521030.059554] usb 3-1.3: Number of endpoints 2
[521030.059558] usb 3-1.3: Endpoint 1 MaxPacketSize 64
[521030.059561] usb 3-1.3: Endpoint 2 MaxPacketSize 64
[521030.059564] usb 3-1.3: Setting MaxPacketSize 64
[521030.059747] usb 3-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[521039.216954] usb 3-1.4: USB disconnect, address 4
[521041.715018] usb 3-1.4: new full speed USB device using ehci_hcd and address 10
[521041.808598] usb 3-1.4: New USB device found, idVendor=05a9, idProduct=4519
[521041.808603] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[521041.808606] usb 3-1.4: Product: USB Camera
[521041.808608] usb 3-1.4: Manufacturer: OmniVision Technologies, Inc.
[521041.808701] usb 3-1.4: configuration #1 chosen from 1 choice
[521041.808976] gspca: probing 05a9:4519
[521042.469094] ov519: I2C synced in 3 attempt(s)
[521042.469097] ov519: starting OV7xx0 configuration
[521042.469793] ov519: Unknown image sensor version: 2
[521042.469795] ov519: Failed to configure OV7xx0
[521042.469797] ov519: OV519 Config failed
[521042.469807] ov519: probe of 3-1.4:1.0 failed with error -16
[521042.469884] gspca: probing 05a9:4519
[521467.885255] usbcore: deregistering interface driver ov519
[521467.885278] ov519: deregistered
[521467.900288] gspca: main deregistered
[521809.376462] dialog[12612]: segfault at 0 ip b77c6125 sp bf8861b0 error 4 in libncursesw.so.5.7[b77b5000+43000]
[524303.418813] usb 3-1.3: USB disconnect, address 9
[524303.419067] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[524303.419086] ftdi_sio 3-1.3:1.1: device disconnected
[524303.616307] usb 3-1.3: new full speed USB device using ehci_hcd and address 11
[524303.715679] usb 3-1.3: New USB device found, idVendor=9e88, idProduct=9e8f
[524303.715684] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[524303.715687] usb 3-1.3: Product: SheevaPlug JTAGKey FT2232D B
[524303.715689] usb 3-1.3: Manufacturer: FTDI
[524303.715691] usb 3-1.3: SerialNumber: FTTIQ4WN
[524303.715781] usb 3-1.3: configuration #1 chosen from 1 choice
[524303.719103] usb 3-1.3: Ignoring serial port reserved for JTAG
[524303.722377] ftdi_sio 3-1.3:1.1: FTDI USB Serial Device converter detected
[524303.722409] usb 3-1.3: Detected FT2232C
[524303.722413] usb 3-1.3: Number of endpoints 2
[524303.722416] usb 3-1.3: Endpoint 1 MaxPacketSize 64
[524303.722419] usb 3-1.3: Endpoint 2 MaxPacketSize 64
[524303.722422] usb 3-1.3: Setting MaxPacketSize 64
[524303.722667] usb 3-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[525406.832482] usb 3-1.3: USB disconnect, address 11
[525406.832714] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[525406.832734] ftdi_sio 3-1.3:1.1: device disconnected
[525407.030940] usb 3-1.3: new full speed USB device using ehci_hcd and address 12
[525407.130381] usb 3-1.3: New USB device found, idVendor=9e88, idProduct=9e8f
[525407.130385] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[525407.130388] usb 3-1.3: Product: SheevaPlug JTAGKey FT2232D B
[525407.130391] usb 3-1.3: Manufacturer: FTDI
[525407.130393] usb 3-1.3: SerialNumber: FTTIQ4WN
[525407.130486] usb 3-1.3: configuration #1 chosen from 1 choice
[525407.133991] usb 3-1.3: Ignoring serial port reserved for JTAG
[525407.137280] ftdi_sio 3-1.3:1.1: FTDI USB Serial Device converter detected
[525407.137313] usb 3-1.3: Detected FT2232C
[525407.137316] usb 3-1.3: Number of endpoints 2
[525407.137319] usb 3-1.3: Endpoint 1 MaxPacketSize 64
[525407.137322] usb 3-1.3: Endpoint 2 MaxPacketSize 64
[525407.137326] usb 3-1.3: Setting MaxPacketSize 64
[525407.137457] usb 3-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[528511.174900] usb 3-1.4: USB disconnect, address 10
[528513.420812] usb 3-1.4: new full speed USB device using ehci_hcd and address 13
[528513.515013] usb 3-1.4: New USB device found, idVendor=05a9, idProduct=4519
[528513.515018] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[528513.515021] usb 3-1.4: Product: USB Camera
[528513.515023] usb 3-1.4: Manufacturer: OmniVision Technologies, Inc.
[528513.515116] usb 3-1.4: configuration #1 chosen from 1 choice
[528513.524620] Linux video capture interface: v2.00
[528513.526783] gspca: main v2.7.0 registered
[528513.527299] gspca: probing 05a9:4519
[528514.190995] ov519: I2C synced in 3 attempt(s)
[528514.190998] ov519: starting OV7xx0 configuration
[528514.192570] ov519: Sensor is an OV7610
[528514.417110] ov519: probe of 3-1.4:1.0 failed with error -5
[528514.417139] usbcore: registered new interface driver ov519
[528514.417143] ov519: registered
** Model information
not available
** Loaded modules:
Module Size Used by
gspca_ov519 17142 0
gspca_main 15775 1 gspca_ov519
videodev 25605 1 gspca_main
v4l1_compat 10250 1 videodev
btrfs 367310 0
zlib_deflate 15822 1 btrfs
crc32c 2172 1
libcrc32c 770 1 btrfs
ufs 56214 0
qnx4 5118 0
hfsplus 61029 0
hfs 33117 0
minix 17822 0
ntfs 164093 0
vfat 6578 0
msdos 5118 0
fat 34944 2 vfat,msdos
jfs 134716 0
xfs 416017 0
exportfs 2626 1 xfs
reiserfs 176358 0
ext2 46277 0
joydev 6739 0
wacom 15720 0
i915 223118 0
drm_kms_helper 18577 1 i915
drm 112040 2 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
acpi_cpufreq 4959 0
cpufreq_stats 1997 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_userspace 1488 0
binfmt_misc 4915 1
fuse 44316 1
ext4 257032 0
jbd2 56219 1 ext4
crc16 1027 1 ext4
shpchp 21220 0
pci_hotplug 18545 1 shpchp
fakephp 1356 0
8139too 14973 0
asb100 8736 0
hwmon_vid 1528 1 asb100
i2c_nforce2 4464 0
firewire_sbp2 9663 0
loop 9777 0
snd_hda_codec_realtek 163318 0
snd_hda_intel 16831 2
snd_usb_audio 50678 1
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_lib 11200 1 snd_usb_audio
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
snd_pcm 47226 4 snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35495 3 snd_seq_midi,snd_seq_midi_event
snd_timer 12270 2 snd_pcm,snd_seq
usbhid 28040 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
ftdi_sio 28568 0
hid 50925 1 usbhid
usbserial 22116 1 ftdi_sio
snd 34431 19 snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
wmi 3575 0
soundcore 3450 1 snd
i2c_i801 6462 0
i2c_core 12795 8 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,asb100,i2c_nforce2,i2c_i801
pcspkr 1207 0
evdev 5609 10
video 14605 1 i915
snd_page_alloc 5061 2 snd_hda_intel,snd_pcm
output 1204 1 video
processor 26343 5 acpi_cpufreq
button 3598 1 i915
ext3 94484 8
jbd 32365 1 ext3
mbcache 3762 3 ext2,ext4,ext3
sd_mod 26029 12
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
firewire_ohci 16733 0
pata_marvell 1709 4
thermal 9206 0
r8169 31365 0
ehci_hcd 28749 0
firewire_core 31275 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
ahci 27418 8
mii 2714 2 8139too,r8169
libata 115925 3 ata_generic,pata_marvell,ahci
xhci 29589 0
scsi_mod 104909 3 firewire_sbp2,sd_mod,libata
thermal_sys 9378 3 video,processor,thermal
usbcore 99017 11 gspca_ov519,gspca_main,wacom,snd_usb_audio,snd_usb_lib,usbhid,ftdi_sio,usbserial,ehci_hcd,xhci
nls_base 4541 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DRAM Controller [8086:0100] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe708000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe707000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8436]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe600000-fe6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: bfa00000-bfafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.7 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe706000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Cougar Point LPC Controller [8086:1c4a] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at fe705000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8384]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:00.0 USB Controller [0c03]: Device [1b21:1042] (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Expansion ROM at d0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
07:00.0 PCI bridge [0604]: Device [1b21:1080] (rev 01) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=07, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
09:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c040 [size=8]
Region 1: I/O ports at c030 [size=4]
Region 2: I/O ports at c020 [size=8]
Region 3: I/O ports at c010 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at fe400000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
** USB devices:
Bus 001 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 012: ID 9e88:9e8f
Bus 003 Device 013: ID 05a9:4519 OmniVision Technologies, Inc. Webcam Classic
Bus 003 Device 005: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 006: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.41 Debian configuration management sy
ii initramfs-tools [linux-initra 0.100 generic modular initramfs generato
ii linux-base 3.4 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-66 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.35 Binary firmware for various driver
ii firmware-linux-nonfree 0.35 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
* linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---