Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem
On Mon, Oct 16, 2017 at 09:39:36PM +0200, Jean-Louis Mounier wrote:
> for some reasons, I changed my mail configuration and I
> discovered your last request very recently (!) Sorry for the
> delay. Now I keep an eye on the bug thru the bug web page.
>
> I discovered a new installer release but the bug is still
> present.
>
> Now the test :
>
> => gpio clear PA17
> gpio: pin PA17 (gpio 17) value is 0
> =>run bootcmd
>
> after that, the installer got IPV4 and IPV6 addresses wwith DHCP and then
> ran fine.
>
> Hope it helps
Yes, that helps as it confirms that a change in u-boot alone is
enough to work around the issue in Linux as well (although it is
debateable whether the kernel should rely on the bootloader in
this case or not). There has recently been an attempt to address
the issue in mainline u-boot, but that didn't work out as planned
and the patch got rejected:
https://lists.denx.de/pipermail/u-boot/2017-September/307778.html
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
Reply to: