Package: src:linux Version: 4.9.168-1 Severity: critical File: /boot/vmlinuz-4.9.0-9-686 Justification: breaks the whole system Dear Maintainer, Debian 9 fails to boot on a Soekris net5501 with a Geode LX processor. Debian 8 worked fine. Running Debian 9 on Linux 3.16.0-8-586 from Debian 8 works. (That's what I'm running Reportbug on.) Linux 4.9.0-7-686, 4.9.0-8-686 and 4.9.0-9-686 appear to hang early in the boot process. The disk activity light remains lit when the system hangs. I'm attaching a boot log acquired over a serial console. I'm reporting this against the kernel because replacing only the kernel works around the problem, but it looks like SystemD has been started when the hang occurs, so I suppose a userspace issue can't be completely ruled out. Given that a kernel compiled for i586 works and one compiled for i686 does not, one might suspect that the processor isn't i686-compatible. This seems to be rather unclear. According to the release notes this processor should still be supported. It has all of the flags that this script tests for: https://www.debian.org/releases/stretch/i386/release-notes/ch-information#i386-is-now-almost-i686 On the debian-user mailing list, some people say that support for Geode LX has been dropped. Others say it should work. If it is actually no longer supported, then please reassign this bug report to the release notes. In that case the release notes should be updated to document this, and provide an accurate test. As near as I can tell this processor is a Geode LX 800. The bios boot screen calls it "Geode LX 500 MHz". It looks very much like this: https://commons.wikimedia.org/wiki/File:AMD_Geode_LX_800_CPU.jpg The text on the processor is: AMD Geode ALXC800EETJCVC 0703CQA 2003-05 C1 TAIWAN $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 5 model : 10 model name : Geode(TM) Integrated Processor by AMD PCS stepping : 2 microcode : 0x8b cpu MHz : 499.900 cache size : 128 KB fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de pse tsc msr cx8 sep pge cmov clflush mmx mmxext 3dnowext 3dnow vmmcall bogomips : 999.80 clflush size : 32 cache_alignment : 32 address sizes : 32 bits physical, 32 bits virtual power management: -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information ** PCI devices: 00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 31) Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices, Inc. [AMD] Geode LX AES Security Block [1022:2082] Subsystem: Advanced Micro Devices, Inc. [AMD] Geode LX AES Security Block [1022:2082] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: Geode LX AES Kernel modules: geode_rng, geode_aes 00:06.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e100 [size=256] Region 1: Memory at a0004000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine Kernel modules: via_rhine 00:07.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e200 [size=256] Region 1: Memory at a0004100 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine Kernel modules: via_rhine 00:08.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at e300 [size=256] Region 1: Memory at a0004200 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine Kernel modules: via_rhine 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at e400 [size=256] Region 1: Memory at a0004300 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine Kernel modules: via_rhine 00:14.0 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] ISA [1022:2090] Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 6000 [size=8] Region 1: I/O ports at 6100 [size=256] Region 2: I/O ports at 6200 [size=64] Kernel driver in use: cs5535-mfd Kernel modules: cs5535_mfd 00:14.2 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master]) Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] IDE [1022:209a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at e000 [size=16] Kernel driver in use: pata_amd Kernel modules: pata_amd, pata_cs5536, ata_generic 00:15.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] OHC [1022:2094] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 15 Region 0: Memory at a0005000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:15.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] EHC [1022:2095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 15 Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ehci-pci Kernel modules: ehci_pci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 9.9 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-debug'), (500, 'stable') Architecture: i386 (i586) Kernel: Linux 3.16.0-8-586 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.9.0-9-686 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 23-2 ii linux-base 4.5 Versions of packages linux-image-4.9.0-9-686 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2.3 Versions of packages linux-image-4.9.0-9-686 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta3-5+deb9u1 pn linux-doc-4.9 <none> Versions of packages linux-image-4.9.0-9-686 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
Loading Linux 4.9.0-9-686 ... Loading initial ramdisk ... [ 0.000000] Linux version 4.9.0-9-686 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.168-1 (2019-04-12) [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] e820: last_pfn = 0x20000 max_arch_pfn = 0x100000 [ 0.000000] MTRR: Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] RAMDISK: [mem 0x1e997000-0x1f9f8fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20160831/tbxfroot-244) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 20000000 [ 0.000000] low ram: 0 - 20000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffffff] [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x20000000-0xffefffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @dfb6a000 s47948 r0 d29876 u77824 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129822 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-9-686 root=UUID=85c73214-64f2-471b-8907-f38b7c9e3450 ro single console=ttyS0,19200n8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 492176K/523896K available (5749K kernel code, 650K rwdata, 1708K rodata, 720K init, 436K bss, 31720K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] .init : 0xdc7ef000 - 0xdc8a3000 ( 720 kB) [ 0.000000] .data : 0xdc59d9a0 - 0xdc7ed880 (2367 kB) [ 0.000000] .text : 0xdc000000 - 0xdc59d9a0 (5750 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 499.903 MHz processor [ 0.012035] Calibrating delay loop (skipped), value calculated using timer frequency.. 999.80 BogoMIPS (lpj=1999612) [ 0.020016] pid_max: default: 32768 minimum: 301 [ 0.024421] Security Framework initialized [ 0.028017] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.032051] AppArmor: AppArmor disabled by boot time parameter [ 0.036145] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.040020] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.045723] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.048022] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.052022] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [ 0.056014] Spectre V2 : Mitigation: Full generic retpoline [ 0.060013] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.064014] Speculative Store Bypass: Vulnerable [ 0.092731] Freeing SMP alternatives memory: 24K [ 0.103266] ftrace: allocating 23797 entries in 47 pages [ 0.200407] smpboot: Max logical packages: 1 [ 0.204031] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.208015] smpboot: SMP motherboard not detected [ 0.212014] smpboot: SMP disabled [ 0.216016] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.220016] Performance Events: no PMU driver, software events only. [ 0.232082] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.236018] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.240118] x86: Booted up 1 node, 1 CPUs [ 0.244022] smpboot: Total of 1 processors activated (999.80 BogoMIPS) [ 0.248889] devtmpfs: initialized [ 0.257905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.260038] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.264228] pinctrl core: initialized pinctrl subsystem [ 0.269129] NET: Registered protocol family 16 [ 0.274066] cpuidle: using governor ladder [ 0.276020] cpuidle: using governor menu [ 0.280223] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.290433] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=0 [ 0.292014] PCI: Using configuration type 1 for base access [ 0.308071] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.313795] ACPI: Interpreter disabled. [ 0.316461] vgaarb: loaded [ 0.320352] dmi: Firmware registration failed. [ 0.324290] PCI: Probing PCI hardware [ 0.328393] PCI host bridge to bus 0000:00 [ 0.332032] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.336025] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.340022] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.352990] pci 0000:00:14.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 0.356146] pci 0000:00:14.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 0.360143] pci 0000:00:14.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 0.364577] pci 0000:00:14.0: [Firmware Bug]: CS5536 ISA bridge quirk: reg 0x10: [io 0x6000-0x6007] [ 0.368043] pci 0000:00:14.0: [Firmware Bug]: CS5536 ISA bridge quirk: reg 0x14: [io 0x6100-0x61ff] [ 0.372043] pci 0000:00:14.0: [Firmware Bug]: CS5536 ISA bridge quirk: reg 0x18: [io 0x6200-0x623f] [ 0.376020] pci 0000:00:14.0: CS5536 ISA bridge bug detected (incorrect header); workaround applied [ 0.381632] pci 0000:00:14.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.384024] pci 0000:00:14.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.388023] pci 0000:00:14.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.392022] pci 0000:00:14.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.405341] clocksource: Switched to clocksource pit [ 0.483690] VFS: Disk quotas dquot_6.6.0 [ 0.487337] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.493673] pnp: PnP ACPI: disabled [ 0.498613] PnPBIOS: Scanning system for PnP BIOS support... [ 0.500986] PnPBIOS: PnP BIOS support was not detected. [ 0.523097] NET: Registered protocol family 2 [ 0.530464] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.532797] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.535530] TCP: Hash tables configured (established 4096 bind 4096) [ 0.541751] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.544760] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.550559] NET: Registered protocol family 1 [ 0.553676] Unpacking initramfs... [ 1.022768] random: fast init done [ 3.774045] Freeing initrd memory: 16776K [ 3.778646] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 3.796125] net5501: system is recognized as "net5501" [ 3.801327] audit: initializing netlink subsys (disabled) [ 3.805802] audit: type=2000 audit(1556748190.804:1): initialized [ 3.812580] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 3.815336] zbud: loaded [ 3.829162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.833794] io scheduler noop registered [ 3.837406] io scheduler deadline registered [ 3.839219] io scheduler cfq registered (default) [ 3.844303] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.849843] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.853700] unchecked MSR access error: RDMSR from 0x179 at rIP: 0xdc043b6a (native_read_msr+0xa/0x40) [ 3.857499] dc81e196 dc821987 dc88544c de4b3f84 dc8219a1 de4b3f10 dc40c71b de4b3f84 [ 3.892853] 2c654cf9 2c654cf9 2c654cf9 00000000 dc0004f5 dc7ef51a de4b3f70 dc7ef529 [ 3.924062] dfb7fc59 dc74a604 dc075376 00000000 de4f9200 00000001 dc769010 00000003 [ 3.959319] Call Trace: [ 3.966062] [<dc81e196>] ? efifb_driver_init+0xc/0xc [ 3.968358] [<dc821987>] ? ghes_init+0x176/0x176 [ 3.972585] [<dc8219a1>] ? extlog_init+0x1a/0x30c [ 3.977338] [<dc40c71b>] ? driver_register+0x8b/0xf0 [ 3.979640] [<dc0004f5>] ? do_one_initcall+0x45/0x180 [ 3.986479] [<dc7ef51a>] ? set_debug_rodata+0xa/0xa [ 3.988262] [<dc7ef529>] ? repair_env_string+0xf/0x50 [ 3.991098] [<dc075376>] ? parse_args+0x2c6/0x580 [ 3.995848] [<dc7efc66>] ? kernel_init_freeable+0x139/0x1b2 [ 4.001797] [<dc5943a0>] ? rest_init+0x70/0x70 [ 4.004981] [<dc5943b0>] ? kernel_init+0x10/0x100 [ 4.009733] [<dc0820c1>] ? schedule_tail+0x11/0x50 [ 4.010995] [<dc5943a0>] ? rest_init+0x70/0x70 [ 4.018187] [<dc59aa3c>] ? ret_from_fork+0x30/0x3c [ 4.019804] isapnp: Scanning for PnP cards... [ 4.381808] isapnp: No Plug & Play device found [ 4.385564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.392194] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.403873] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.412802] Linux agpgart interface v0.103 [ 4.419823] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.679377] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.686207] mousedev: PS/2 mouse device common for all mice [ 4.688465] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 4.694654] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 4.696988] ledtrig-cpu: registered to indicate activity on CPUs [ 4.700997] dmi-sysfs: dmi entry is absent. [ 4.707187] NET: Registered protocol family 10 [ 4.715413] mip6: Mobile IPv6 [ 4.721364] NET: Registered protocol family 17 [ 4.724041] mpls_gso: MPLS GSO support [ 4.730542] mce: Unable to init device /dev/mcelog (rc: -5) [ 4.732211] Using IPI No-Shortcut mode [ 4.739943] registered taskstats version 1 [ 4.744608] zswap: loaded using pool lzo/zbud [ 4.751105] ima: No TPM chip found, activating TPM-bypass! [ 4.756064] ima: Allocated hash algorithm: sha256 [ 4.761262] rtc_cmos rtc_cmos: setting system clock to 2019-05-01 22:03:18 UTC (1556748198) [ 4.764806] Freeing unused kernel memory: 720K [ 4.767922] Write protecting the kernel text: 5752k [ 4.773511] Write protecting the kernel read-only data: 1716k [ 4.799152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe695fdcd74, max_idle_ns: 881590490404 ns [ 4.808332] clocksource: Switched to clocksource tsc Loading, please wait... starting version[ 4.943400] random: systemd-udevd: uninitialized urandom read (16 bytes read) 232 [ 5.001964] random: udevadm: uninitialized urandom read (16 bytes read) [ 5.042639] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 5.235550] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker [ 5.391364] SCSI subsystem initialized [ 5.430329] usbcore: registered new interface driver usbfs [ 5.547356] via-rhine 0000:00:06.0 eth0: VIA Rhine III (Management Adapter) at 0x1e100, 00:00:24:c9:2e:0c, IRQ 11 [ 5.609732] via-rhine 0000:00:06.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1 [ 5.708409] usbcore: registered new interface driver hub [ 5.840460] usbcore: registered new device driver usb [ 5.950561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.996188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.035952] ehci-pci: EHCI PCI platform driver [ 6.070464] scsi host0: pata_amd [ 6.091936] scsi host1: pata_amd [ 6.114215] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 6.156075] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 6.209469] via-rhine 0000:00:07.0 eth1: VIA Rhine III (Management Adapter) at 0x1e200, 00:00:24:c9:2e:0d, IRQ 5 [ 6.271291] via-rhine 0000:00:07.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 [ 6.331169] ehci-pci 0000:00:15.1: EHCI Host Controller [ 6.362947] ehci-pci 0000:00:15.1: new USB bus registered, assigned bus number 1 [ 6.407833] ata1.00: supports DRM functions and may not be fully accessible [ 6.449569] ata1.00: ATA-9: Samsung SSD 850 PRO 1TB, EXM02B6Q, max UDMA/133 [ 6.491306] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 6.531870] ehci-pci 0000:00:15.1: irq 15, io mem 0xa0006000 [ 6.580102] ehci-pci 0000:00:15.1: USB 2.0 started, EHCI 1.00 [ 6.614923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.655606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.698919] usb usb1: Product: EHCI Host Controller [ 6.728177] usb usb1: Manufacturer: Linux 4.9.0-9-686 ehci_hcd [ 6.763165] usb usb1: SerialNumber: 0000:00:15.1 [ 6.794351] hub 1-0:1.0: USB hub found [ 6.817014] hub 1-0:1.0: 4 ports detected [ 6.851916] ohci-pci: OHCI PCI platform driver [ 6.887464] via-rhine 0000:00:08.0 eth2: VIA Rhine III (Management Adapter) at 0x1e300, 00:00:24:c9:2e:0e, IRQ 9 [ 6.949359] via-rhine 0000:00:08.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 [ 7.015856] ohci-pci 0000:00:15.0: OHCI PCI host controller [ 7.049440] ohci-pci 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 7.094018] ohci-pci 0000:00:15.0: irq 15, io mem 0xa0005000
Attachment:
pgp6Ebh842465.pgp
Description: OpenPGP digital signatur