[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1025747: marked as done (linux-image-5.10.0-19: linux-image-5.10.0-19 not boot with XEN (mpt3sas error))



Your message dated Fri, 21 Apr 2023 14:07:21 +0000
with message-id <E1pprQ1-0097kA-OO@fasolo.debian.org>
and subject line Bug#1022126: fixed in linux 5.10.178-1
has caused the Debian Bug report #1022126,
regarding linux-image-5.10.0-19: linux-image-5.10.0-19 not boot with XEN (mpt3sas error)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1022126: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1022126
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 5.10.149-2
Severity: important
File: linux-image-5.10.0-19

Dear Maintainer,

Debian Bullseye not boot with XEN, linux-image-5.10.0-19.

Error: mpt3sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:12336/_scsih_probe()!

Previous kernel version (5.10.0-18) working good.



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R630
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 2.15.0
board_vendor: Dell Inc.
board_name: 0CNCJW
board_version: A11

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DMI2 [8086:2f00] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DMI2 [8086:0000]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 0
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed unknown (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>     Capabilities: [144 v1] Vendor Specific Information: ID=0004 Rev=1 Len=03c <?>     Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>     Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 [8086:2f02] (rev 02) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 218
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00002000-00002fff [size=4K]
    Memory behind bridge: 92100000-933fffff [size=19M]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00618  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #1, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 8GT/s (ok), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd+
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+              EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest+
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

00:02.0 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 [8086:2f04] (rev 02) (prog-if 00 [Normal decode])
    DeviceName: SLOT 3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 219
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 2 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00638  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #3, Speed 8GT/s, Width x16, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
            Slot #3, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:2f08] (rev 02) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 220
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 91f00000-91ffffff [size=1M]
    Prefetchable memory behind bridge: 0000000091a00000-0000000091afffff [size=1M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00658  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #7, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (downgraded), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

00:03.1 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:2f09] (rev 02) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 221
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 92000000-920fffff [size=1M]
    Prefetchable memory behind bridge: 0000000091b00000-0000000091bfffff [size=1M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00678  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #8, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (downgraded), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

00:03.2 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:2f0a] (rev 02) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 222
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00698  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #9, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

00:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Address Map, VTd_Misc, System Management [8086:2f28] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-

00:05.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Hot Plug [8086:2f29] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [100 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [110 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [120 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [130 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>

00:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 RAS, Control Status and Global Errors [8086:2f2a] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr+ UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-

00:05.4 PIC [0800]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 I/O APIC [8086:2f2c] (rev 02) (prog-if 20 [IO(X)-APIC])     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 I/O APIC [8086:0000]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at 91e14000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Unassigned class [ff00]: Intel Corporation C610/X99 series chipset SPSR [8086:8d7c] (rev 05)
    Subsystem: Dell C610/X99 series chipset SPSR [1028:0601]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [80] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

00:11.4 SATA controller [0106]: Intel Corporation C610/X99 series chipset sSATA Controller [AHCI mode] [8086:8d62] (rev 05) (prog-if 01 [AHCI 1.0])     Subsystem: Dell C610/X99 series chipset sSATA Controller [AHCI mode] [1028:0601]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 231
    Region 0: I/O ports at 3078 [size=8]
    Region 1: I/O ports at 308c [size=4]
    Region 2: I/O ports at 3070 [size=8]
    Region 3: I/O ports at 3088 [size=4]
    Region 4: I/O ports at 3040 [size=32]
    Region 5: Memory at 91e11000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00738  Data: 0000
    Capabilities: [70] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
    Kernel driver in use: ahci
    Kernel modules: ahci

00:14.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB xHCI Host Controller [8086:8d31] (rev 05) (prog-if 30 [XHCI])     Subsystem: Dell C610/X99 series chipset USB xHCI Host Controller [1028:0601]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 19
    Region 0: Memory at 91e00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [70] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation C610/X99 series chipset MEI Controller #1 [8086:8d3a] (rev 05)
    Subsystem: Dell C610/X99 series chipset MEI Controller [1028:0601]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 255
    Region 0: Memory at 3bffff03000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Kernel modules: mei_me

00:16.1 Communication controller [0780]: Intel Corporation C610/X99 series chipset MEI Controller #2 [8086:8d3b] (rev 05)
    Subsystem: Dell C610/X99 series chipset MEI Controller [1028:0601]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 255
    Region 0: Memory at 3bffff02000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000

00:1a.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 [8086:8d2d] (rev 05) (prog-if 20 [EHCI])
    DeviceName: Embedded EHCI USB Controller 2
    Subsystem: Dell C610/X99 series chipset USB Enhanced Host Controller [1028:0601]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at 91e13000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:1c.0 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #1 [8086:8d10] (rev d5) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 223
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr+ UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+ CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
             10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee006b8  Data: 0000
    Capabilities: [90] Subsystem: Dell C610/X99 series chipset PCI Express Root Port [1028:0601]
    Capabilities: [a0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation C610/X99 series chipset PCI Express Root Port #8 [8086:8d1e] (rev d5) (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 224
    Bus: primary=00, secondary=07, subordinate=0b, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 91000000-919fffff [size=10M]
    Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff [size=16M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
            Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
            Changed: MRL- PresDet- LinkState+
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee006d8  Data: 0000
    Capabilities: [90] Subsystem: Dell C610/X99 series chipset PCI Express Root Port [1028:0601]
    Capabilities: [a0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-         UESvrt:    DLP+ SDES- TLP+ FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 [8086:8d26] (rev 05) (prog-if 20 [EHCI])
    DeviceName: Embedded EHCI USB Controller 1
    Subsystem: Dell C610/X99 series chipset USB Enhanced Host Controller [1028:0601]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at 91e12000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation C610/X99 series chipset LPC Controller [8086:8d44] (rev 05)
    Subsystem: Dell C610/X99 series chipset LPC Controller [1028:0601]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] [8086:8d02] (rev 05) (prog-if 01 [AHCI 1.0])     Subsystem: Dell C610/X99 series chipset 6-Port SATA Controller [AHCI mode] [1028:0601]     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 232
    Region 0: I/O ports at 3068 [size=8]
    Region 1: I/O ports at 3084 [size=4]
    Region 2: I/O ports at 3060 [size=8]
    Region 3: I/O ports at 3080 [size=4]
    Region 4: I/O ports at 3020 [size=32]
    Region 5: Memory at 91e10000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee00758  Data: 0000
    Capabilities: [70] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
    Kernel driver in use: ahci
    Kernel modules: ahci

01:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
    DeviceName: NIC1
    Subsystem: Dell NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [1028:1f5b]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 41
    Region 0: Memory at 91b30000 (64-bit, prefetchable) [size=64K]
    Region 2: Memory at 91b40000 (64-bit, prefetchable) [size=64K]
    Region 4: Memory at 91b50000 (64-bit, prefetchable) [size=64K]
    Expansion ROM at 92000000 [disabled] [size=256K]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
        Product Name: Broadcom NetXtreme Gigabit Ethernet
        Read-only fields:
            [PN] Part number: BCM95720
            [MN] Manufacture ID: 1028
            [V0] Vendor specific: FFV22.00.6
            [V1] Vendor specific: DSV1028VPDR.VER1.0
            [V2] Vendor specific: NPY2
            [V3] Vendor specific: PMT1
            [V4] Vendor specific: NMVBroadcom Corp
            [V5] Vendor specific: DTINIC
            [V6] Vendor specific: DCM1001008d452101008d45
            [RV] Reserved: checksum good, 233 byte(s) reserved
        End
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [a0] MSI-X: Enable+ Count=17 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00001000
    Capabilities: [ac] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- FLReset-
            MaxPayload 256 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         CEMsk:    RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn+ ECRCChkCap+ ECRCChkEn+
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [13c v1] Device Serial Number 00-00-14-18-77-5c-7d-73
    Capabilities: [150 v1] Power Budgeting <?>
    Capabilities: [160 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Kernel driver in use: tg3
    Kernel modules: tg3

01:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
    DeviceName: NIC2
    Subsystem: Dell NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [1028:1f5b]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 45
    Region 0: Memory at 91b00000 (64-bit, prefetchable) [size=64K]
    Region 2: Memory at 91b10000 (64-bit, prefetchable) [size=64K]
    Region 4: Memory at 91b20000 (64-bit, prefetchable) [size=64K]
    Expansion ROM at 92040000 [disabled] [size=256K]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
        Product Name: Broadcom NetXtreme Gigabit Ethernet
        Read-only fields:
            [PN] Part number: BCM95720
            [MN] Manufacture ID: 1028
            [V0] Vendor specific: FFV22.00.6
            [V1] Vendor specific: DSV1028VPDR.VER1.0
            [V2] Vendor specific: NPY2
            [V3] Vendor specific: PMT1
            [V4] Vendor specific: NMVBroadcom Corp
            [V5] Vendor specific: DTINIC
            [V6] Vendor specific: DCM1001008d452101008d45
            [RV] Reserved: checksum good, 233 byte(s) reserved
        End
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [a0] MSI-X: Enable- Count=17 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00001000
    Capabilities: [ac] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
            MaxPayload 256 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         CEMsk:    RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn+ ECRCChkCap+ ECRCChkEn+
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [13c v1] Device Serial Number 00-00-14-18-77-5c-7d-74
    Capabilities: [150 v1] Power Budgeting <?>
    Capabilities: [160 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Kernel driver in use: tg3
    Kernel modules: tg3

02:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
    DeviceName: NIC3
    Subsystem: Dell NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [1028:1f5b]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 40
    Region 0: Memory at 91a30000 (64-bit, prefetchable) [size=64K]
    Region 2: Memory at 91a40000 (64-bit, prefetchable) [size=64K]
    Region 4: Memory at 91a50000 (64-bit, prefetchable) [size=64K]
    Expansion ROM at 91f00000 [disabled] [size=256K]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=8 DScale=1 PME-
    Capabilities: [50] Vital Product Data
        Product Name: Broadcom NetXtreme Gigabit Ethernet
        Read-only fields:
            [PN] Part number: BCM95720
            [MN] Manufacture ID: 1028
            [V0] Vendor specific: FFV22.00.6
            [V1] Vendor specific: DSV1028VPDR.VER1.0
            [V2] Vendor specific: NPY2
            [V3] Vendor specific: PMT1
            [V4] Vendor specific: NMVBroadcom Corp
            [V5] Vendor specific: DTINIC
            [V6] Vendor specific: DCM1001008d452101008d45
            [RV] Reserved: checksum good, 233 byte(s) reserved
        End
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [a0] MSI-X: Enable- Count=17 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00001000
    Capabilities: [ac] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
            MaxPayload 256 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         CEMsk:    RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn+ ECRCChkCap+ ECRCChkEn+
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [13c v1] Device Serial Number 00-00-14-18-77-5c-7d-75
    Capabilities: [150 v1] Power Budgeting <?>
    Capabilities: [160 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Kernel driver in use: tg3
    Kernel modules: tg3

02:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [14e4:165f]
    DeviceName: NIC4
    Subsystem: Dell NetXtreme BCM5720 2-port Gigabit Ethernet PCIe [1028:1f5b]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 44
    Region 0: Memory at 91a00000 (64-bit, prefetchable) [size=64K]
    Region 2: Memory at 91a10000 (64-bit, prefetchable) [size=64K]
    Region 4: Memory at 91a20000 (64-bit, prefetchable) [size=64K]
    Expansion ROM at 91f40000 [disabled] [size=256K]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
        Product Name: Broadcom NetXtreme Gigabit Ethernet
        Read-only fields:
            [PN] Part number: BCM95720
            [MN] Manufacture ID: 1028
            [V0] Vendor specific: FFV22.00.6
            [V1] Vendor specific: DSV1028VPDR.VER1.0
            [V2] Vendor specific: NPY2
            [V3] Vendor specific: PMT1
            [V4] Vendor specific: NMVBroadcom Corp
            [V5] Vendor specific: DTINIC
            [V6] Vendor specific: DCM1001008d452101008d45
            [RV] Reserved: checksum good, 233 byte(s) reserved
        End
    Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [a0] MSI-X: Enable- Count=17 Masked-
        Vector table: BAR=4 offset=00000000
        PBA: BAR=4 offset=00001000
    Capabilities: [ac] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us             ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
            MaxPayload 256 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-         LnkCap:    Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x1 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         CEMsk:    RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn+ ECRCChkCap+ ECRCChkEn+
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [13c v1] Device Serial Number 00-00-14-18-77-5c-7d-76
    Capabilities: [150 v1] Power Budgeting <?>
    Capabilities: [160 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Kernel driver in use: tg3
    Kernel modules: tg3

03:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02)
    DeviceName: Integrated RAID
    Subsystem: Dell HBA330 Mini [1028:1f53]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 26
    Region 0: I/O ports at 2000 [size=256]
    Region 1: Memory at 93200000 (64-bit, non-prefetchable) [size=64K]
    Region 3: Memory at 92100000 (64-bit, non-prefetchable) [size=1M]
    Expansion ROM at <ignored> [disabled]
    Capabilities: [50] Power Management version 3
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
            MaxPayload 256 bytes, MaxReadReq 4096 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-         LnkCap:    Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s <2us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 8GT/s (ok), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range BC, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+              EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [c0] MSI-X: Enable+ Count=96 Masked-
        Vector table: BAR=1 offset=0000e000
        PBA: BAR=1 offset=0000f000
    Capabilities: [100 v2] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 05000001 00082001 3f5800b0 63a18156
    Capabilities: [1e0 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [1c0 v1] Power Budgeting <?>
    Capabilities: [190 v1] Dynamic Power Allocation <?>
    Capabilities: [150 v1] Single Root I/O Virtualization (SR-IOV)
        IOVCap:    Migration-, Interrupt Message Number: 000
        IOVCtl:    Enable- Migration- Interrupt- MSE- ARIHierarchy+
        IOVSta:    Migration-
        Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
        VF offset: 1, stride: 1, Device ID: 0097
        Supported Page Size: 00000553, System Page Size: 00000001
        Region 0: Memory at 0000000093210000 (64-bit, non-prefetchable)
        Region 2: Memory at 0000000092200000 (64-bit, non-prefetchable)
        VF Migration: offset: 00000000, BIR: 0
    Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
        ARICap:    MFVC- ACS-, Next Function: 0
        ARICtl:    MFVC- ACS-, Function Group: 0
    Kernel driver in use: mpt3sas
    Kernel modules: mpt3sas

07:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7758 PCIe Switch [PS] [1912:001d] (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin ? routed to IRQ 225
    BIST result: 00
    Bus: primary=07, secondary=08, subordinate=0b, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 91000000-919fffff [size=10M]
    Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff [size=16M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee006f8  Data: 0000
    Capabilities: [70] Express (v2) Upstream Port, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
        LnkCtl:    ASPM Disabled; Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: Routing-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: EgressBlck-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [b0] Subsystem: Renesas Technology Corp. SH7758 PCIe Switch [PS] [1912:001d]
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Kernel driver in use: pcieport

08:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7758 PCIe Switch [PS] [1912:001d] (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin ? routed to IRQ 226
    BIST result: 00
    Bus: primary=08, secondary=09, subordinate=0a, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 91000000-918fffff [size=9M]
    Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff [size=16M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee00718  Data: 0000
    Capabilities: [70] Express (v2) Downstream Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
        LnkCtl:    ASPM Disabled; Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- ARIFwd-
             AtomicOpsCap: Routing-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: EgressBlck-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB              Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [b0] Subsystem: Renesas Technology Corp. SH7758 PCIe Switch [PS] [1912:001d]
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Kernel driver in use: pcieport

09:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7758 PCIe-PCI Bridge [PPB] [1912:001a] (prog-if 00 [Normal decode])     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    BIST result: 00
    Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: 91000000-918fffff [size=9M]
    Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff [size=16M]     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [70] Express (v2) PCI-Express to PCI/PCI-X Bridge, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr+ FatalErr- UnsupReq+ AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM not supported
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [b0] Subsystem: Renesas Technology Corp. SH7758 PCIe-PCI Bridge [PPB] [1912:001a]
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn+ ECRCChkCap+ ECRCChkEn+
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000

0a:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. G200eR2 [102b:0534] (rev 01) (prog-if 00 [VGA controller])
    DeviceName: Embedded Video
    Subsystem: Dell G200eR2 [1028:0601]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (4000ns min, 8000ns max)
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at 90000000 (32-bit, prefetchable) [size=16M]
    Region 1: Memory at 91800000 (32-bit, non-prefetchable) [size=16K]
    Region 2: Memory at 91000000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
    Capabilities: [dc] Power Management version 1
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: mgag200
    Kernel modules: mgag200

7f:08.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f80] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f80]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:08.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f32] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f32]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:08.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f83] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f83]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:09.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f90] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f90]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:09.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f33] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f33]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:09.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f93] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f93]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0b.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f81] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f81]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0b.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f36] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f36]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0b.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f37] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f37]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe1] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe1]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe2] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe2]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe3] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe3]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe4] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe4]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe5] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe5]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe6] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe6]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0c.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe7] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe7]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0f.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent [8086:2ff8] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0f.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent [8086:2ff9] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0f.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffc] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0f.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffd] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:0f.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffe] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:10.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f1d] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f1d]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:10.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f34] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f34]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:10.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1e] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1e]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:10.6 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f7d] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f7d]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:10.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1f] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1f]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:12.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2fa0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2fa0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:12.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2f30] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2f30]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:12.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 Debug [8086:2f70] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 Debug [8086:2f70]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086... (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086:2fa8]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086... (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086:2f71]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2faa] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2faa]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fab] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fab]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fac] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fac]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fad] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fad]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 0/1 Broadcast [8086:2fae] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:13.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast [8086:2faf] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control [8086:2fb0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control [8086:2fb0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 Thermal Control [8086:2fb1] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 Thermal Control [8086:2fb1]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 ERROR Registers [8086:2fb2] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 ERROR Registers [8086:2fb2]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 ERROR Registers [8086:2fb3] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 ERROR Registers [8086:2fb3]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbc] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbd] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbe] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:14.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbf] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:15.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 Thermal Control [8086:2fb4] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 Thermal Control [8086:2fb4]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:15.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 Thermal Control [8086:2fb5] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 Thermal Control [8086:2fb5]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:15.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 ERROR Registers [8086:2fb6] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 ERROR Registers [8086:2fb6]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:15.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 ERROR Registers [8086:2fb7] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 ERROR Registers [8086:2fb7]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:16.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Target Address, Thermal & RAS Registers [8086... (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:16.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 2/3 Broadcast [8086:2f6e] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:16.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast [8086:2f6f] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:17.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Channel 0 Thermal Control [8086:2fd0] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:17.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fb8] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:17.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fb9] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:17.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fba] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:17.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fbb] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1e.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f98] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f98]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1e.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f99] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f99]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1e.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9a] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9a]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1e.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Region 0: Memory at <ignored> (low-1M, non-prefetchable) [disabled]

7f:1e.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9c] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9c]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1f.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 VCU [8086:2f88] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

7f:1f.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 VCU [8086:2f8a] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

80:01.0 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 [8086:2f02] (rev 02) (prog-if 00 [Normal decode])
    DeviceName: SLOT 2
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 227
    Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00318  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #1, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
            Slot #2, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

80:03.0 PCI bridge [0604]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:2f08] (rev 02) (prog-if 00 [Normal decode])
    DeviceName: SLOT 1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 228
    Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3 [8086:0000]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00338  Data: 0000
        Masking: 00000002  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         LnkCap:    Port #7, Speed 8GT/s, Width x16, ASPM L1, Exit Latency L1 <16us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
            Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
        DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
        LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-              EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
    Capabilities: [110 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-         ACSCtl:    SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
    Capabilities: [148 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-         UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol+         UESvrt:    DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-         CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-         CEMsk:    RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+         AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn+ NFERptEn+ FERptEn+
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
    Capabilities: [250 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>     Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
    Kernel driver in use: pcieport

80:05.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Address Map, VTd_Misc, System Management [8086:2f28] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-

80:05.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Hot Plug [8086:2f29] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [100 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [110 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [120 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>     Capabilities: [130 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>

80:05.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 RAS, Control Status and Global Errors [8086:2f2a] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-     Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr+ UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-         DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR-              10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-              EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
             AtomicOpsCtl: ReqEn-

80:05.4 PIC [0800]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 I/O APIC [8086:2f2c] (rev 02) (prog-if 20 [IO(X)-APIC])     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 I/O APIC [8086:0000]     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

ff:08.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f80] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f80]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:08.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f32] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f32]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:08.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f83] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 0 [8086:2f83]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:09.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f90] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f90]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:09.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f33] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f33]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:09.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f93] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 QPI Link 1 [8086:2f93]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0b.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f81] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f81]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0b.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f36] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f36]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0b.2 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f37] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 & 1 Monitoring [8086:2f37]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe1] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe1]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe2] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe2]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe3] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe3]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe4] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe4]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe5] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe5]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe6] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe6]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0c.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe7] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers [8086:2fe7]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0f.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent [8086:2ff8] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0f.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent [8086:2ff9] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0f.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffc] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0f.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffd] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:0f.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2ffe] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder & Broadcast Registers [8086:2fe0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:10.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f1d] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f1d]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:10.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f34] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface [8086:2f34]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:10.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1e] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1e]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:10.6 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f7d] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f7d]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:10.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1f] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers [8086:2f1f]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:12.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2fa0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2fa0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:12.1 Performance counters [1101]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2f30] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 [8086:2f30]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:12.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 Debug [8086:2f70] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0 Debug [8086:2f70]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086... (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086:2fa8]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086... (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal & RAS Registers [8086:2f71]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2faa] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2faa]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fab] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fab]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fac] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fac]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fad] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder [8086:2fad]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 0/1 Broadcast [8086:2fae] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:13.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast [8086:2faf] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control [8086:2fb0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control [8086:2fb0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 Thermal Control [8086:2fb1] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 Thermal Control [8086:2fb1]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 ERROR Registers [8086:2fb2] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 ERROR Registers [8086:2fb2]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 ERROR Registers [8086:2fb3] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 ERROR Registers [8086:2fb3]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbc] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbd] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbe] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:14.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 & 1 [8086:2fbf] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:15.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 Thermal Control [8086:2fb4] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 Thermal Control [8086:2fb4]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:15.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 Thermal Control [8086:2fb5] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 Thermal Control [8086:2fb5]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:15.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 ERROR Registers [8086:2fb6] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 ERROR Registers [8086:2fb6]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:15.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 ERROR Registers [8086:2fb7] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 ERROR Registers [8086:2fb7]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:16.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Target Address, Thermal & RAS Registers [8086... (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:16.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 2/3 Broadcast [8086:2f6e] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:16.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast [8086:2f6f] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:17.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Channel 0 Thermal Control [8086:2fd0] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:17.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fb8] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:17.5 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fb9] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:17.6 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fba] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:17.7 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 & 3 [8086:2fbb] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1e.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f98] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f98]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1e.1 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f99] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f99]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1e.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9a] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9a]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1e.3 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Region 0: Memory at <ignored> (low-1M, non-prefetchable) [disabled]

ff:1e.4 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9c] (rev 02)     Subsystem: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit [8086:2f9c]     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1f.0 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 VCU [8086:2f88] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

ff:1f.2 System peripheral [0880]: Intel Corporation Xeon E7 v3/Xeon E5 v3/Core i7 VCU [8086:2f8a] (rev 02)     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


** USB devices:
Bus 004 Device 002: ID 8087:8002 Intel Corp. 8 channel internal hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:800a Intel Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 413c:2107 Dell Computer Corp. KB212-B Quiet Key Keyboard
Bus 002 Device 003: ID 413c:a001 Dell Computer Corp. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 11.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-18-amd64 (SMP w/24 CPU threads)
Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-19-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-19-amd64 recommends:
ii  apparmor             2.13.6-10
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-19-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.06-3~deb11u4
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-19-amd64 is related to:
pn  firmware-amd-graphics                       <none>
pn  firmware-atheros                            <none>
pn  firmware-bnx2                               <none>
pn  firmware-bnx2x                              <none>
pn  firmware-brcm80211                          <none>
pn  firmware-cavium                             <none>
pn  firmware-intel-sound                        <none>
pn  firmware-intelwimax                         <none>
pn  firmware-ipw2x00                            <none>
pn  firmware-ivtv                               <none>
pn  firmware-iwlwifi                            <none>
pn  firmware-libertas                           <none>
pn  firmware-linux-nonfree                      <none>
ii  firmware-misc-nonfree                       20210315-3
pn  firmware-myricom                            <none>
pn  firmware-netxen                             <none>
pn  firmware-qlogic                             <none>
pn  firmware-realtek                            <none>
pn  firmware-samsung                            <none>
pn  firmware-siano                              <none>
pn  firmware-ti-connectivity                    <none>
ii  xen-hypervisor-4.14-amd64 [xen-hypervisor] 4.14.5+86-g1c354767d5-1

-- no debconf information



--
-----
Dröszler Gábor
Datatrans Internet Kft.

--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 5.10.178-1
Done: Salvatore Bonaccorso <carnil@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 1022126@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Fri, 21 Apr 2023 13:24:45 +0200
Source: linux
Architecture: source
Version: 5.10.178-1
Distribution: bullseye
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 989705 993612 1022126 1031753
Changes:
 linux (5.10.178-1) bullseye; urgency=medium
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.163
     - [arm64,armhf] usb: musb: remove extra check in musb_gadget_vbus_draw
     - [arm64] dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
     - [armhf] dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
     - [arm64] perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
     - [arm64] dts: armada-3720-turris-mox: Add missing interrupt for RTC
     - pstore/ram: Fix error return code in ramoops_probe()
     - [armhf] mmp: fix timer_read delay
     - pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
     - sched/fair: Cleanup task_util and capacity type
     - sched/uclamp: Fix relationship between uclamp and migration margin
     - cpuidle: dt: Return the correct numbers of parsed idle states
     - PM: hibernate: Fix mistake in kerneldoc comment
     - fs: don't audit the capability check in simple_xattr_list()
     - perf: Fix possible memleak in pmu_dev_alloc()
     - [x86] platform/x86: huawei-wmi: fix return value calculation
     - timerqueue: Use rb_entry_safe() in timerqueue_getnext()
     - lib/fonts: fix undefined behavior in bit shift for get_default_font
     - ocfs2: fix memory leak in ocfs2_stack_glue_init()
     - PNP: fix name memory leak in pnp_alloc_dev()
     - [x86] perf/x86/intel/uncore: Fix reference count leak in
       hswep_has_limit_sbox()
     - [x86] perf/x86/intel/uncore: Fix reference count leak in
       snr_uncore_mmio_map()
     - [x86] perf/x86/intel/uncore: Fix reference count leak in
       __uncore_imc_init_box()
     - [arm64] platform/chrome: cros_usbpd_notify: Fix error handling in
       cros_usbpd_notify_init()
     - [arm64] irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
     - [amd64] EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
     - nfsd: don't call nfsd_file_put from client states seqfile display
     - genirq/irqdesc: Don't try to remove non-existing sysfs files
     - [x86] cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
     - libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
     - lib/notifier-error-inject: fix error when writing -errno to debugfs file
     - docs: fault-injection: fix non-working usage of negative values
     - debugfs: fix error when writing negative value to atomic_t debugfs file
     - ocfs2: ocfs2_mount_volume does cleanup job before return error
     - ocfs2: rewrite error handling of ocfs2_fill_super
     - ocfs2: fix memory leak in ocfs2_mount_volume()
     - rapidio: fix possible name leaks when rio_add_device() fails
     - rapidio: rio: fix possible name leak in rio_register_mport()
     - futex: Move to kernel/futex/
     - futex: Resend potentially swallowed owner death notification
     - cpu/hotplug: Make target_store() a nop when target == state
     - [armhf] clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare
       in dmtimer_systimer_init_clock()
     - ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
     - [x86] uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
     - [x86] xen: Fix memory leak in xen_smp_intr_init{_pv}()
     - [x86] xen: Fix memory leak in xen_init_lock_cpu()
     - xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
     - PM: runtime: Improve path in rpm_idle() when no callback
     - PM: runtime: Do not call __rpm_callback() from rpm_idle()
     - [x86] platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
     - [x86] platform/x86: intel_scu_ipc: fix possible name leak in
       __intel_scu_ipc_register()
     - fs: sysv: Fix sysv_nblocks() returns wrong value
     - rapidio: fix possible UAF when kfifo_alloc() fails
     - eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
     - relay: fix type mismatch when allocating memory in relay_create_buf()
     - hfs: Fix OOB Write in hfs_asc2mac
     - rapidio: devices: fix missing put_device in mport_cdev_open
     - wifi: ath9k: hif_usb: fix memory leak of urbs in
       ath9k_hif_usb_dealloc_tx_urbs()
     - wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
     - wifi: rtl8xxxu: Fix reading the vendor of combo chips
     - [arm64] drm/bridge: adv7533: remove dynamic lane switching from adv7533
       bridge
     - [armhf] media: coda: jpeg: Add check for kmalloc
     - [arm64] venus: pm_helpers: Fix error check in vcodec_domains_get()
     - can: kvaser_usb: do not increase tx statistics when sending error message
       frames
     - can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
     - can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to
       {leaf,usbcan}_cmd_can_error_event
     - can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
     - can: kvaser_usb_leaf: Set Warning state even without bus errors
     - can: kvaser_usb_leaf: Fix improved state not being reported
     - can: kvaser_usb_leaf: Fix wrong CAN state after stopping
     - can: kvaser_usb_leaf: Fix bogus restart events
     - can: kvaser_usb: Add struct kvaser_usb_busparams
     - can: kvaser_usb: Compare requested bittiming parameters with actual
       parameters in do_set_{,data}_bittiming
     - spi: Update reference to struct spi_controller
     - ima: Fix fall-through warnings for Clang
     - ima: Handle -ESTALE returned by ima_filter_rule_match()
     - [arm64] drm/msm/hdmi: switch to drm_bridge_connector
     - [arm64] drm/msm/hdmi: drop unused GPIO support
     - bpf: Fix slot type check in check_stack_write_var_off
     - media: vivid: fix compose size exceed boundary
     - bpf: propagate precision in ALU/ALU64 operations
     - bpf: Check the other end of slot_type for STACK_SPILL
     - bpf: propagate precision across all frames, not just the last one
     - mtd: Fix device name leak when register device failed in add_mtd_device()
     - wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
     - rxrpc: Fix ack.bufferSize to be 0 when generating an ack
     - drm/radeon: Add the missed acpi_put_table() to fix memory leak
     - regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
     - amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
     - drm/fourcc: Add packed 10bit YUV 4:2:0 format
     - drm/fourcc: Fix vsub/hsub for Q410 and Q401
     - integrity: Fix memory leakage in keyring allocation error path
     - ima: Fix misuse of dereference of pointer in template_desc_init_fields()
     - wifi: ath10k: Fix return value in ath10k_pci_init()
     - mtd: lpddr2_nvm: Fix possible null-ptr-deref
     - Input: elants_i2c - properly handle the reset GPIO when power is off
     - media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
     - media: solo6x10: fix possible memory leak in solo_sysfs_init()
     - inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
     - bpf: Move skb->len == 0 checks into __bpf_redirect
     - HID: hid-sensor-custom: set fixed size for custom attributes
     - ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
     - ALSA: seq: fix undefined behavior in bit shift for
       SNDRV_SEQ_FILTER_USE_EVENT
     - regulator: core: use kfree_const() to free space conditionally
     - [arm64,armhf] clk: rockchip: Fix memory leak in
       rockchip_clk_register_pll()
     - drm/amdgpu: fix pci device refcount leak
     - bonding: fix link recovery in mode 2 when updelay is nonzero
     - drbd: fix an invalid memory access caused by incorrect use of list
       iterator
     - media: imon: fix a race condition in send_packet()
     - [arm64] clk: imx: replace osc_hdmi with dummy
     - pinctrl: pinconf-generic: add missing of_node_put()
     - media: dvb-core: Fix ignored return value in dvb_register_frontend()
     - media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
       (CVE-2023-28328)
     - [arm64,armhf] drm/tegra: Add missing clk_disable_unprepare() in
       tegra_dc_probe()
     - ASoC: dt-bindings: wcd9335: fix reset line polarity in example
     - NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
     - NFSv4.2: Fix a memory stomp in decode_attr_security_label
     - NFSv4.2: Fix initialisation of struct nfs4_label
     - NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
     - NFS: Fix an Oops in nfs_d_automount()
     - [x86] ALSA: asihpi: fix missing pci_disable_device()
     - wifi: iwlwifi: mvm: fix double free on tx path.
     - drm/amd/pm/smu11: BACO is supported when it's in BACO state
     - drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
     - drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
     - netfilter: conntrack: set icmpv6 redirects as RELATED
     - bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
     - bpf, sockmap: Fix data loss caused by using apply_bytes on ingress
       redirect
     - bonding: uninitialized variable in bond_miimon_inspect()
     - spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
     - wifi: mac80211: fix memory leak in ieee80211_if_add()
     - wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys()
       fails
     - regulator: core: fix module refcount leak in set_supply()
     - regulator: core: fix resource leak in regulator_register()
     - hwmon: (jc42) Convert register access and caching to regmap/regcache
     - hwmon: (jc42) Restore the min/max/critical temperatures on resume
     - bpf, sockmap: fix race in sock_map_free()
     - ALSA: pcm: Set missing stop_operating flag at undoing trigger start
     - media: saa7164: fix missing pci_disable_device()
     - ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
     - xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
     - SUNRPC: Fix missing release socket in rpc_sockname()
     - NFSv4.x: Fail client initialisation if state manager thread can't run
     - [armhf] media: coda: Add check for dcoda_iram_alloc
     - [armhf] media: coda: Add check for kmalloc
     - [armhf] clk: samsung: Fix memory leak in _samsung_clk_register_pll()
     - [armhf] spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
     - wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
     - wifi: rtl8xxxu: Fix the channel width reporting
     - wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
     - blktrace: Fix output non-blktrace event when blk_classic option enabled
     - [armhf] clk: socfpga: clk-pll: Remove unused variable 'rc'
     - [armhf] clk: socfpga: use clk_hw_register for a5/c5
     - [armhf] clk: socfpga: Fix memory leak in socfpga_gate_init()
     - [x86] net: vmw_vsock: vmci: Check memcpy_from_msg()
     - net: defxx: Fix missing err handling in dfx_init()
     - drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
     - of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry()
       and find_dup_cset_prop()
     - ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
     - net: farsync: Fix kmemleak when rmmods farsync
     - net/tunnel: wait until all sk_user_data reader finish before releasing the
       sock
     - hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
     - [i386] net: amd: lance: don't call dev_kfree_skb() under
       spin_lock_irqsave()
     - [amd64,arm64] net: amd-xgbe: Fix logic around active and passive cables
     - [amd64,arm64] net: amd-xgbe: Check only the minimum speed for
       active/passive cables
     - sctp: sysctl: make extra pointers netns aware
     - Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
     - Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
     - stmmac: fix potential division by 0
     - apparmor: fix a memleak in multi_transaction_new()
     - apparmor: fix lockdep warning when removing a namespace
     - apparmor: Fix abi check to include v8 abi
     - [arm64] crypto: nitrox - avoid double free on error path in
       nitrox_sriov_init()
     - scsi: core: Fix a race between scsi_done() and scsi_timeout()
     - apparmor: Use pointer to struct aa_label for lbs_cred
     - [arm64,armhf] PCI: dwc: Fix n_fts[] array overrun
     - RDMA/core: Fix order of nldev_exit call
     - f2fs: Fix the race condition of resize flag between resizefs
     - apparmor: Fix memleak in alloc_ns()
     - f2fs: fix normal discard process
     - RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
     - scsi: scsi_debug: Fix a warning in resp_write_scat()
     - crypto: cryptd - Use request context instead of stack for sub-request
     - [arm64] RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
     - [arm64] RDMA/hns: Fix ext_sge num error when post send
     - PCI: Check for alloc failure in pci_request_irq()
     - [amd64] RDMA/hfi: Decrease PCI device reference count in error path
     - [arm64] RDMA/hns: fix memory leak in hns_roce_alloc_mr()
     - RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create
       failed
     - scsi: hpsa: Fix possible memory leak in hpsa_init_one()
     - crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
     - padata: Always leave BHs disabled when running ->parallel()
     - padata: Fix list iterator in padata_do_serial()
     - scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
     - scsi: hpsa: Fix error handling in hpsa_add_sas_host()
     - scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
     - scsi: scsi_debug: Fix a warning in resp_verify()
     - scsi: scsi_debug: Fix a warning in resp_report_zones()
     - scsi: fcoe: Fix possible name leak when device_register() fails
     - scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
     - scsi: ipr: Fix WARNING in ipr_init()
     - scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
     - scsi: snic: Fix possible UAF in snic_tgt_create()
     - RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
     - f2fs: avoid victim selection from previous victim section
     - RDMA/nldev: Fix failure to send large messages
     - [arm64,armhf] crypto: amlogic - Remove kcalloc without check
     - [amd64] RDMA/hfi1: Fix error return code in parse_platform_config()
     - RDMA/srp: Fix error return code in srp_parse_options()
     - orangefs: Fix sysfs not cleanup when dev init failed
     - [arm64] RDMA/hns: Fix PBL page MTR find
     - [arm64] RDMA/hns: Fix page size cap from firmware
     - [x86] hwrng: amd - Fix PCI device refcount leak
     - [i386] hwrng: geode - Fix PCI device refcount leak
     - IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
     - [arm64,armhf] serial: tegra: Read DMA status before terminating
     - class: fix possible memory leak in __class_register()
     - vfio: platform: Do not pass return buffer to ACPI _RST method
     - usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
     - usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
     - usb: typec: tipd: Fix spurious fwnode_handle_put in error path
     - [arm*] serial: amba-pl011: avoid SBSA UART accessing DMACR register
     - [arm*] serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
     - [i386] serial: pch: Fix PCI device refcount leak in pch_request_dma()
     - tty: serial: clean up stop-tx part in altera_uart_tx_chars()
     - misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
     - misc: sgi-gru: fix use-after-free error in gru_set_context_option,
       gru_fault and gru_handle_user_call_os (CVE-2022-3424)
     - [arm*] firmware: raspberrypi: fix possible memory leak in
       rpi_firmware_probe()
     - iio: temperature: ltc2983: make bulk write buffer DMA-safe
     - genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
     - iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable
     - iio: adis: handle devices that cannot unmask the drdy pin
     - iio: adis: stylistic changes
     - iio:imu:adis: Move exports into IIO_ADISLIB namespace
     - iio: adis: add '__adis_enable_irq()' implementation
     - usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
     - usb: gadget: f_hid: optional SETUP/SET_REPORT mode
     - usb: gadget: f_hid: fix f_hidg lifetime vs cdev
     - usb: gadget: f_hid: fix refcount leak on error path
     - chardev: fix error handling in cdev_device_add()
     - [i386] i2c: pxa-pci: fix missing pci_disable_device() on error in
       ce4100_i2c_probe
     - [x86] staging: rtl8192u: Fix use after free in ieee80211_rx()
     - [x86] staging: rtl8192e: Fix potential use-after-free in
       rtllib_rx_Monitor()
     - gpiolib: Get rid of redundant 'else'
     - gpiolib: cdev: fix NULL-pointer dereferences
     - usb: storage: Add check for kcalloc
     - tracing/hist: Fix issue of losting command info in error_log
     - fbdev: pm2fb: fix missing pci_disable_device()
     - [x86] fbdev: via: Fix error in via_core_init()
     - [x86] fbdev: vermilion: decrease reference count in error path
     - [x86] fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
     - [armhf] HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
     - [armhf] HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
     - power: supply: fix residue sysfs file in error handle route of
       __power_supply_register()
     - perf trace: Return error if a system call doesn't exist
     - perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
     - perf trace: Handle failure when trace point folder is missed
     - perf symbol: correction while adjusting symbol
     - [armhf] HSI: omap_ssi_core: Fix error handling in ssi_init()
     - power: supply: fix null pointer dereferencing in
       power_supply_get_battery_info
     - [arm64,armhf] pwm: tegra: Improve required rate calculation
     - dmaengine: idxd: Fix crc_val field for completion record
     - rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
     - rtc: cmos: Fix event handler registration ordering issue
     - rtc: cmos: Fix wake alarm breakage
     - rtc: cmos: fix build on non-ACPI platforms
     - rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
     - rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
     - rtc: cmos: Eliminate forward declarations of some functions
     - rtc: cmos: Rename ACPI-related functions
     - rtc: cmos: Disable ACPI RTC event on removal
     - [armhf] rtc: snvs: Allow a time difference on clock register read
     - [arm64] rtc: pcf85063: Fix reading alarm
     - [amd64] iommu/amd: Fix pci device refcount leak in ppr_notifier()
     - [powerpc*] xmon: Enable breakpoints on 8xx
     - [powerpc*] xmon: Fix -Wswitch-unreachable warning in bpt_cmds
     - [powerpc*] xive: add missing iounmap() in error path in
       xive_spapr_populate_irq_data()
     - kbuild: remove unneeded mkdir for external modules_install
     - kbuild: unify modules(_install) for in-tree and external modules
     - kbuild: refactor single builds of *.ko
     - [powerpc*] perf: callchain validate kernel stack pointer bounds
     - [powerpc*] hv-gpci: Fix hv_gpci event list
     - [powerpc*] eeh: Drop redundant spinlock initialization
     - [powerpc*] pseries/eeh: use correct API for error log size
     - netfilter: flowtable: really fix NAT IPv6 offload
     - [arm64] rtc: pcf85063: fix pcf85063_clkout_control
     - NFSD: Remove spurious cb_setup_err tracepoint
     - nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
     - net: macsec: fix net device access prior to holding a lock
     - mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under
       spin_lock_irqsave()
     - mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under
       spin_lock_irqsave()
     - mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under
       spin_lock_irqsave()
     - nfc: pn533: Clear nfc_target before being used
     - r6040: Fix kmemleak in probe and remove
     - net: switch to storing KCOV handle directly in sk_buff
     - net: add inline function skb_csum_is_sctp
     - net: igc: use skb_csum_is_sctp instead of protocol check
     - net: add a helper to avoid issues with HW TX timestamping and SO_TXTIME
     - igc: Enhance Qbv scheduling by using first flag bit
     - igc: Use strict cycles for Qbv scheduling
     - igc: Add checking for basetime less than zero
     - igc: recalculate Qbv end_time by considering cycle time
     - igc: Lift TAPRIO schedule restriction
     - igc: Set Qbv start_time and end_time to end_time if not being configured
       in GCL
     - openvswitch: Fix flow lookup to use unmasked key
     - skbuff: Account for tail adjustment during pull operations
     - [arm64] mailbox: zynq-ipi: fix error handling while device_register()
       fails
     - net_sched: reject TCF_EM_SIMPLE case for complex ematch module
     - rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
     - myri10ge: Fix an error handling path in myri10ge_probe()
     - net: stream: purge sk_error_queue in sk_stream_kill_queues()
     - rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
     - [arm64] make is_ttbrX_addr() noinstr-safe
     - video: hyperv_fb: Avoid taking busy spinlock on panic path
     - [x86] hyperv: Remove unregister syscore call from Hyper-V cleanup
     - binfmt_misc: fix shift-out-of-bounds in check_special_flags
     - fs: jfs: fix shift-out-of-bounds in dbAllocAG
     - udf: Avoid double brelse() in udf_rename()
     - fs: jfs: fix shift-out-of-bounds in dbDiscardAG
     - ACPICA: Fix error code path in acpi_ds_call_control_method()
     - nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
     - nilfs2: fix shift-out-of-bounds due to too large exponent of block size
     - acct: fix potential integer overflow in encode_comp_t()
     - hfs: fix OOB Read in __hfs_brec_find
     - [armhf] drm/etnaviv: add missing quirks for GC300
     - brcmfmac: return error when getting invalid max_flowrings from dongle
     - wifi: ath9k: verify the expected usb_endpoints are present
     - wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
     - ipmi: fix memleak when unload ipmi driver
     - drm/amd/display: prevent memory leak
     - qed (gcc13): use u16 for fid to be big enough
     - bpf: make sure skb->len != 0 when redirecting to a tunneling device
     - hamradio: baycom_epp: Fix return type of baycom_send_packet()
     - wifi: brcmfmac: Fix potential shift-out-of-bounds in
       brcmf_fw_alloc_request()
     - igb: Do not free q_vector unless new one was allocated
     - drm/amdgpu: Fix type of second parameter in trans_msg() callback
     - drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
     - [s390x] ctcm: Fix return type of ctc{mp,}m_tx()
     - [s390x] netiucv: Fix return type of netiucv_tx()
     - [s390x] lcs: Fix return type of lcs_start_xmit()
     - [arm64] drm/msm: Use drm_mode_copy()
     - [arm64] drm/rockchip: Use drm_mode_copy()
     - drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
     - md/raid1: stop mdx_raid1 thread when raid1 array run failed
     - drm/amd/display: fix array index out of bound error in bios parser
     - net: add atomic_long_t to net_device_stats fields
     - mrp: introduce active flags to prevent UAF when applicant uninit
     - ppp: associate skb with a device at tx
     - bpf: Prevent decl_tag from being referenced in func_proto arg
     - ethtool: avoiding integer overflow in ethtool_phys_id()
     - media: dvb-frontends: fix leak of memory fw
     - media: dvbdev: adopts refcnt to avoid UAF
     - media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
     - blk-mq: fix possible memleak when register 'hctx' failed
     - regulator: core: fix use_count leakage when handling boot-on
     - [arm64] mmc: f-sdh30: Add quirks for broken timeout clock capability
     - media: si470x: Fix use-after-free in si470x_int_in_callback()
     - hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
     - orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
     - orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
     - hwmon: (jc42) Fix missing unlock on error in jc42_write()
     - ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
     - ALSA: hda: add snd_hdac_stop_streams() helper
     - [x86] ASoC: Intel: Skylake: Fix driver hang during shutdown
     - ASoC: audio-graph-card: fix refcount leak of cpu_ep in
       __graph_for_each_link()
     - [x86] ASoC: rt5670: Remove unbalanced pm_runtime_put()
     - pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
     - perf debug: Set debug_peo_args and redirect_to_stderr variable to correct
       values in perf_quiet_option()
     - afs: Fix lost servers_outstanding count
     - pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
     - ima: Simplify ima_lsm_copy_rule
     - ALSA: usb-audio: add the quirk for KT0206 device
     - ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
     - ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
     - [arm64,armhf] usb: dwc3: Fix race between dwc3_set_mode and
       __dwc3_set_mode
     - [arm64,armhf] usb: dwc3: core: defer probe on ulpi_read_id timeout
     - HID: wacom: Ensure bootloader PID is usable in hidraw mode
     - reiserfs: Add missing calls to reiserfs_security_free()
     - iio: adc: ad_sigma_delta: do not use internal iio_dev lock
     - iio: adc128s052: add proper .data members in adc128_of_match table
     - regulator: core: fix deadlock on regulator enable
     - ovl: fix use inode directly in rcu-walk mode
     - media: dvbdev: fix build warning due to comments
     - media: dvbdev: fix refcnt bug
     - [armhf] pwm: tegra: Fix 32 bit build
     - [arm64,armhf] usb: dwc3: qcom: Fix memory leak in
       dwc3_qcom_interconnect_init
     - cifs: fix oops during encryption
     - nvme-pci: fix doorbell buffer value endianness
     - nvme-pci: fix mempool alloc size
     - nvme-pci: fix page size checks
     - ata: ahci: Fix PCS quirk application for suspend
     - nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
     - [powerpc*] rtas: avoid device tree lookups in rtas_os_term()
     - [powerpc*] rtas: avoid scheduling in rtas_os_term()
     - HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
     - HID: plantronics: Additional PIDs for double volume key presses quirk
     - pstore/zone: Use GFP_ATOMIC to allocate zone buffer
     - hfsplus: fix bug causing custom uid and gid being unable to be assigned
       with mount
     - binfmt: Fix error return code in load_elf_fdpic_binary()
     - ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
     - ALSA: line6: correct midi status byte when receiving data from podxt
     - ALSA: line6: fix stack overflow in line6_midi_transmit
     - pnode: terminate at peers of source
     - md: fix a crash in mempool_free
     - mm, compaction: fix fast_isolate_around() to stay within boundaries
     - f2fs: should put a page when checking the summary info
     - mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
     - tpm: acpi: Call acpi_put_table() to fix memory leak
     - tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
     - tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
     - SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
     - net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow()
     - wifi: rtlwifi: remove always-true condition pointed out by GCC 12
     - wifi: rtlwifi: 8192de: correct checking of IQK reload
     - rcu: Prevent lockdep-RCU splats on lock acquisition/release
     - net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO
     - net/af_packet: make sure to pull mac header
     - media: stv0288: use explicitly signed char
     - jbd2: use the correct print format
     - [arm64] dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
     - btrfs: fix resolving backrefs for inline extent followed by prealloc
     - [arm64] dts: qcom: sdm850-lenovo-yoga-c630: correct I2C12 pins drive
       strength
     - PM/devfreq: governor: Add a private governor_data for governor
     - cpufreq: Init completion before kobject_init_and_add()
     - ALSA: patch_realtek: Fix Dell Inspiron Plus 16
     - ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
     - dm cache: Fix ABBA deadlock between shrink_slab and
       dm_cache_metadata_abort
     - dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
     - dm thin: Use last transaction's pmd->root when commit failed
     - dm thin: resume even if in FAIL mode
     - dm thin: Fix UAF in run_timer_softirq()
     - dm integrity: Fix UAF in dm_integrity_dtr()
     - dm cache: Fix UAF in destroy()
     - dm cache: set needs_check flag after aborting metadata
     - tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
     - perf/core: Call LSM hook after copying perf_event_attr
     - [x86] KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check
       fails
     - [x86] microcode/intel: Do not retry microcode reloading on the APs
     - [x86] ftrace/x86: Add back ftrace_expected for ftrace bug reports
     - [x86] kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
     - tracing/hist: Fix wrong return value in parse_action_params()
     - tracing: Fix infinite loop in tracing_read_pipe on overflowed
       print_trace_line
     - media: dvb-core: Fix double free in dvb_register_device()
     - cifs: fix confusing debug message
     - cifs: fix missing display of three mount options
     - md/bitmap: Fix bitmap chunk size overflow issues
     - efi: Add iMac Pro 2017 to uefi skip cert quirk
     - wifi: wilc1000: sdio: fix module autoloading
     - ipmi: fix long wait in unload when IPMI disconnect
     - mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
     - ima: Fix a potential NULL pointer access in ima_restore_measurement_list
     - ipmi: fix use after free in _ipmi_destroy_user()
     - PCI: Fix pci_device_is_present() for VFs by checking PF
     - PCI/sysfs: Fix double free in error path
     - driver core: Fix bus_type.match() error handling in __driver_attach()
     - [amd64] iommu/amd: Fix ivrs_acpihid cmdline parsing code
     - [armhf] remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
     - device_cgroup: Roll back to original exceptions after copy failure
     - drm/connector: send hotplug uevent on connector cleanup
     - [x86] drm/i915/dsi: fix VBT send packet port selection for dual link DSI
     - ext4: silence the warning when evicting inode with dioread_nolock
     - ext4: add inode table check in __ext4_get_inode_loc to aovid possible
       infinite loop
     - ext4: fix use-after-free in ext4_orphan_cleanup
     - ext4: fix undefined behavior in bit shift for ext4_check_flag_values
     - ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
     - ext4: add helper to check quota inums
     - ext4: fix bug_on in __es_tree_search caused by bad quota inode
     - ext4: fix reserved cluster accounting in __es_remove_extent()
     - ext4: check and assert if marking an no_delete evicting inode dirty
     - ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
     - ext4: init quota for 'old.inode' in 'ext4_rename'
     - ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
     - ext4: fix corruption when online resizing a 1K bigalloc fs
     - ext4: fix error code return to user-space in ext4_get_branch()
     - ext4: avoid BUG_ON when creating xattrs
     - ext4: fix inode leak in ext4_xattr_inode_create() on an error path
     - ext4: initialize quota before expanding inode in setproject ioctl
     - ext4: avoid unaccounted block allocation when expanding inode
     - ext4: allocate extended attribute value in vmalloc area
     - drm/amdgpu: handle polaris10/11 overlap asics (v2)
     - drm/amdgpu: make display pinning more flexible (v2)
     - [armel,armhf] renumber bits related to _TIF_WORK_MASK
     - [x86] perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping
       procedure
     - [x86] perf/x86/intel/uncore: Clear attr_update properly
     - btrfs: replace strncpy() with strscpy()
     - [x86] mce: Get rid of msr_ops
     - [x86] MCE/AMD: Clear DFR errors found in THR handler
     - perf probe: Use dwarf_attr_integrate as generic DWARF attr accessor
     - perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged
       data
     - [x86] kprobes: Convert to insn_decode()
     - [x86] kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
     - ext4: goto right label 'failed_mount3a'
     - ext4: correct inconsistent error msg in nojournal mode
     - mm/highmem: Lift memcpy_[to|from]_page to core
     - ext4: use memcpy_to_page() in pagecache_write()
     - fs: ext4: initialize fsdata in pagecache_write()
     - ext4: move functions in super.c
     - ext4: simplify ext4 error translation
     - ext4: fix various seppling typos
     - ext4: fix leaking uninitialized memory in fast-commit journal
     - ext4: use kmemdup() to replace kmalloc + memcpy
     - mbcache: don't reclaim used entries
     - mbcache: add functions to delete entry if unused
     - ext4: remove EA inode entry from mbcache on inode eviction
     - ext4: unindent codeblock in ext4_xattr_block_set()
     - ext4: fix race when reusing xattr blocks
     - mbcache: automatically delete entries from cache on freeing
     - ext4: fix deadlock due to mbcache entry corruption
     - SUNRPC: ensure the matching upcall is in-flight upon downcall
     - bpf: pull before calling skb_postpull_rcsum()
     - [arm64,armhf] drm/panfrost: Fix GEM handle creation ref-counting
     - [x86] vmxnet3: correctly report csum_level for encapsulated packet
     - veth: Fix race with AF_XDP exposing old or uninitialized descriptors
     - nfsd: shut down the NFSv4 state objects before the filecache
     - [arm64] net: hns3: add interrupts re-initialization while doing VF FLR
     - net: sched: fix memory leak in tcindex_set_parms
     - qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure
     - nfc: Fix potential resource leaks
     - vhost/vsock: Fix error handling in vhost_vsock_init()
     - vhost: fix range used in translate_desc()
     - net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error path
     - net/mlx5: Avoid recovery in probe flows
     - net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by default
     - net/mlx5e: Fix hw mtu initializing at XDP SQ allocation
     - [amd64,arm64] net: amd-xgbe: add missed tasklet_kill
     - RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
     - [arm64] drm/meson: Reduce the FIFO lines held when AFBC is not used
     - filelock: new helper: vfs_inode_has_locks
     - ceph: switch to vfs_inode_has_locks() to fix file lock bug
     - netfilter: ipset: fix hash:net,port,net hang with /0 subnet
     - netfilter: ipset: Rework long task execution when adding/deleting entries
     - perf tools: Fix resources leak in perf_data__open_dir()
     - drivers/net/bonding/bond_3ad: return when there's no aggregator
     - usb: rndis_host: Secure rndis_query check against int overflow
     - [x86] drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
     - udf: Fix extension of the last extent in the file
     - [x86] ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071
       tablet
     - nvme: fix multipath crash caused by flush request when blktrace is enabled
     - [x86] bugs: Flush IBP in ib_prctl_set() (CVE-2023-0045)
     - nfsd: fix handling of readdir in v4root vs. mount upcall timeout
     - fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
     - [x86] drm/i915/gvt: fix gvt debugfs destroy
     - [x86] drm/i915/gvt: fix vgpu debugfs clean in remove
     - ext4: don't allow journal inode to have encrypt flag
     - hfs/hfsplus: use WARN_ON for sanity check
     - hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
     - mbcache: Avoid nesting of cache->c_list_lock under bit locks
     - efi: random: combine bootloader provided RNG seed with RNG protocol output
     - io_uring: Fix unsigned 'res' comparison with zero in io_fixup_rw_res()
     - ext4: disable fast-commit of encrypted dir operations
     - ext4: don't set up encryption key during jbd2 transaction
     - [arm64] fsl_lpuart: Don't enable interrupts too early
     - serial: fixup backport of "serial: Deassert Transmit Enable on probe in
       driver-specific way"
     - net/ulp: prevent ULP without clone op from entering the LISTEN status
       (CVE-2023-0461)
     - ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list
     - ALSA: hda - Enable headset mic on another Dell laptop with ALC3254
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.164
     - ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx
     - [arm64] KVM: arm64: Fix S1PTW handling on RO memslots
     - efi: tpm: Avoid READ_ONCE() for accessing the event log
     - docs: Fix the docs build with Sphinx 6.0
     - perf auxtrace: Fix address filter duplicate symbol selection
     - [arm64] ASoC: qcom: lpass-cpu: Fix fallback SD line index handling
     - [s390x] cpum_sf: add READ_ONCE() semantics to compare and swap loops
     - [s390x] percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
     - cifs: Fix uninitialized memory read for smb311 posix symlink create
     - [arm64] drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for
       aux transfer
     - [x86] platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight
       during probe
     - ixgbe: fix pci device refcount leak
     - bus: mhi: host: Fix race between channel preparation and M0 event
     - [amd64] iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid]
       commands
     - [amd64] iommu/amd: Fix ill-formed ivrs_ioapic, ivrs_hpet and ivrs_acpihid
       options
     - [arm64] clk: imx8mp: Add DISP2 pixel clock
     - [arm64] clk: imx8mp: add clkout1/2 support
     - dt-bindings: clocks: imx8mp: Add ID for usb suspend clock
     - [arm64] clk: imx: imx8mp: add shared clk gate for usb suspend clk
     - xhci: Avoid parsing transfer events several times
     - xhci: get isochronous ring directly from endpoint structure
     - xhci: adjust parameters passed to cleanup_halted_endpoint()
     - xhci: Add xhci_reset_halted_ep() helper function
     - xhci: move xhci_td_cleanup so it can be called by more functions
     - xhci: store TD status in the td struct instead of passing it along
     - xhci: move and rename xhci_cleanup_halted_endpoint()
     - xhci: Prevent infinite loop in transaction errors recovery for streams
     - [arm64,armhf] usb: ulpi: defer ulpi_register on ulpi_read_id timeout
     - ext4: fix uninititialized value in 'ext4_evict_inode'
     - xfrm: fix rcu lock in xfrm_notify_userpolicy()
     - netfilter: ipset: Fix overflow before widen in the bitmap_ip_create()
       function.
     - [powerpc*] imc-pmu: Fix use of mutex in IRQs disabled section
     - [x86] boot: Avoid using Intel mnemonics in AT&T syntax asm
     - EDAC/device: Fix period calculation in edac_device_reset_delay_period()
     - [arm64] ASoC: wm8904: fix wrong outputs volume after power reactivation
     - tipc: fix unexpected link reset due to discovery messages
     - hvc/xen: lock console list traversal
     - nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()
     - net/sched: act_mpls: Fix warning during failed attribute validation
     - net/mlx5: Fix ptp max frequency adjustment range
     - net/mlx5e: Don't support encap rules with gbp option
     - mm: Always release pages to the buddy allocator in memblock_free_late().
     - Documentation: KVM: add API issues section
     - [x86] KVM: x86: Do not return host topology information from
       KVM_GET_SUPPORTED_CPUID
     - [x86] resctrl: Use task_curr() instead of task_struct->on_cpu to prevent
       unnecessary IPI
     - [x86] resctrl: Fix task CLOSID/RMID update race
     - [arm64] atomics: remove LL/SC trampolines
     - [arm64] cmpxchg_double*: hazard against entire exchange variable
     - efi: fix NULL-deref in init error path
     - drm/virtio: Fix GEM handle creation UAF
     - io_uring/io-wq: free worker if task_work creation is canceled
     - io_uring/io-wq: only free worker if it was allocated for creation
     - Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.165
     - btrfs: fix trace event name typo for FLUSH_DELAYED_REFS
     - pNFS/filelayout: Fix coalescing test for single DS
     - net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats
     - btrfs: always report error in run_one_delayed_ref()
     - [x86] asm: Fix an assembler warning with current binutils
     - f2fs: let's avoid panic if extent_tree is not created
     - wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
     - wifi: mac80211: sdata can be NULL during AMPDU start
     - zonefs: Detect append writes at invalid locations
     - nilfs2: fix general protection fault in nilfs_btree_insert()
     - efi: fix userspace infinite retry read efivars after EFI runtime services
       page fault
     - ALSA: hda/realtek - Turn on power early
     - [x86] drm/i915/gt: Reset twice
     - Bluetooth: hci_qca: Wait for timeout during suspend
     - Bluetooth: hci_qca: Fix driver shutdown on closed serdev
     - io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
     - io_uring: improve send/recv error handling
     - io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly
     - io_uring: add flag for disabling provided buffer recycling
     - io_uring: support MSG_WAITALL for IORING_OP_SEND(MSG)
     - io_uring: allow re-poll if we made progress
     - io_uring: fix async accept on O_NONBLOCK sockets
     - io_uring: check for valid register opcode earlier
     - io_uring: lock overflowing for IOPOLL
     - io_uring: fix CQ waiting timeout handling
     - io_uring: ensure that cached task references are always put on exit
     - io_uring: remove duplicated calls to io_kiocb_ppos
     - io_uring: update kiocb->ki_pos at execution time
     - io_uring: do not recalculate ppos unnecessarily
     - io_uring/rw: defer fsnotify calls to task context
     - xhci-pci: set the dma max_seg_size
     - usb: xhci: Check endpoint is valid before dereferencing it
     - xhci: Fix null pointer dereference when host dies
     - xhci: Add update_hub_device override for PCI xHCI hosts
     - xhci: Add a flag to disable USB3 lpm on a xhci root port level.
     - usb: acpi: add helper to check port lpm capability using acpi _DSM
     - xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
     - prlimit: do_prlimit needs to have a speculation check (CVE-2023-0458)
     - USB: serial: option: add Quectel EM05-G (GR) modem
     - USB: serial: option: add Quectel EM05-G (CS) modem
     - USB: serial: option: add Quectel EM05-G (RS) modem
     - USB: serial: option: add Quectel EC200U modem
     - USB: serial: option: add Quectel EM05CN (SG) modem
     - USB: serial: option: add Quectel EM05CN modem
     - USB: misc: iowarrior: fix up header size for
       USB_DEVICE_ID_CODEMERCS_IOW100
     - usb: core: hub: disable autosuspend for TI TUSB8041
     - [x86] comedi: adv_pci1760: Fix PWM instruction handling
     - [arm64,armhf] mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
     - [arm64,armhf] mmc: sdhci-esdhc-imx: correct the tuning start tap and step
       setting
     - btrfs: fix race between quota rescan and disable leading to NULL pointer
       deref
     - cifs: do not include page data when checking signature
     - [x86] thunderbolt: Use correct function to calculate maximum USB3 link
       rate
     - USB: gadgetfs: Fix race between mounting and unmounting
     - USB: serial: cp210x: add SCALANCE LPE-9000 device id
     - usb: typec: altmodes/displayport: Add pin assignment helper
     - usb: typec: altmodes/displayport: Fix pin assignment calculation
     - usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
     - usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210
     - [i386] serial: pch_uart: Pass correct sg to dma_unmap_sg()
     - [arm64] dmaengine: tegra210-adma: fix global intr clear
     - [x86] mei: me: add meteor lake point M DID
     - [x86] drm/i915: re-disable RC6p on Sandy Bridge
     - drm/amd/display: Fix set scaling doesn's work
     - drm/amd/display: Calculate output_color_space after pixel encoding
       adjustment
     - drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix
     - [arm64] efi: Execute runtime services from a dedicated stack
     - [arm64] efi: rt-wrapper: Add missing include
     - Revert "drm/amdgpu: make display pinning more flexible (v2)"
     - [x86] fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN
     - tracing: Use alignof__(struct {type b;}) instead of offsetof()
     - io_uring: io_kiocb_update_pos() should not touch file for non -1 offset
     - io_uring/net: fix fast_iov assignment in io_setup_async_msg()
     - net/ulp: use consistent error code when blocking ULP
     - net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
     - Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
     - Bluetooth: hci_qca: Wait for SSR completion during suspend
     - Bluetooth: hci_qca: check for SSR triggered flag while suspend
     - Bluetooth: hci_qca: Fixed issue during suspend
     - mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
     - io_uring: Clean up a false-positive warning from GCC 9.3.0
     - io_uring: fix double poll leak on repolling
     - io_uring/rw: ensure kiocb_end_write() is always called
     - io_uring/rw: remove leftover debug statement
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.166
     - clk: generalize devm_clk_get() a bit
     - clk: Provide new devm_clk helpers for prepared and enabled clocks
     - [armel,armhf] memory: mvebu-devbus: Fix missing clk_disable_unprepare in
       mvebu_devbus_probe()
     - [armhf] dts: imx6ul-pico-dwarf: Use 'clock-frequency'
     - [armhf] imx: add missing of_node_put()
     - [amd64] HID: intel_ish-hid: Add check for ishtp_dma_tx_map
     - tomoyo: fix broken dependency on *.conf.default
     - RDMA/core: Fix ib block iterator counter overflow
     - [amd64] IB/hfi1: Reject a zero-length user expected buffer
     - [amd64] IB/hfi1: Reserve user expected TIDs
     - [amd64] IB/hfi1: Fix expected receive setup error exit issues
     - [amd64] IB/hfi1: Immediately remove invalid memory from hardware
     - [amd64] IB/hfi1: Remove user expected buffer invalidate race
     - affs: initialize fsdata in affs_truncate()
     - [amd64,arm64] amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent
     - [amd64,arm64] amd-xgbe: Delay AN timeout during KR training
     - bpf: Fix pointer-leak due to insufficient speculative store bypass
       mitigation
     - [arm64] phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in
       rockchip_usb2phy_power_on()
     - net: nfc: Fix use-after-free in local_cleanup()
     - [arm64,armhf] gpio: mxc: Always set GPIOs used as interrupt source to
       INPUT mode
     - wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
       (CVE-2023-23559)
     - net/sched: sch_taprio: fix possible use-after-free
     - l2tp: Serialize access to sk_user_data with sk_callback_lock
       (CVE-2022-4129)
     - l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
       (CVE-2022-4129)
     - l2tp: convert l2tp_tunnel_list to idr
     - l2tp: close all race conditions in l2tp_tunnel_register()
     - net: usb: sr9700: Handle negative len
     - net: mdio: validate parameter addr in mdiobus_get_phy()
     - HID: check empty report_list in hid_validate_values() (CVE-2023-1073)
     - HID: check empty report_list in bigben_probe()
     - net: stmmac: fix invalid call to mdiobus_get_phy()
     - HID: revert CHERRY_MOUSE_000C quirk
     - usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
     - usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
     - net: mlx5: eliminate anonymous module_init & module_exit
     - dmaengine: Fix double increment of client_count in dma_chan_get()
     - [arm64] net: macb: fix PTP TX timestamp failure due to packet padding
     - l2tp: prevent lockdep issue in l2tp_tunnel_register()
     - HID: betop: check shape of output reports
     - nvme-pci: fix timeout request state check
     - tcp: avoid the lookup process failing to get sk in ehash table
     - w1: fix deadloop in __w1_remove_master_device()
     - w1: fix WARNING after calling w1_process()
     - driver core: Fix test_async_probe_init saves device in wrong array
     - tcp: fix rate_app_limited to default to 1
     - scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
     - [arm64,armhf] cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
     - drm: Add orientation quirk for Lenovo ideapad D330-10IGL
     - [arm64] cpufreq: armada-37xx: stop using 0 as NULL pointer
     - [armhf] ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97
       CODEC
     - spi: spidev: remove debug messages that access spidev->spi without locking
     - [s390x] KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
     - [arm64] scsi: hisi_sas: Set a port invalid only if there are no devices
       attached when refreshing port id
     - [x86] platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
     - [x86] platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
     - lockref: stop doing cpu_relax in the cmpxchg loop
     - netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
     - [x86] ACPI: cstate: Optimize C3 entry on AMD CPUs
     - fs: reiserfs: remove useless new_opts in reiserfs_remount
     - sysctl: add a new register_sysctl_init() interface
     - kernel/panic: move panic sysctls to its own file
     - panic: unset panic_on_warn inside panic()
     - exit: Add and use make_task_dead.
     - objtool: Add a missing comma to avoid string concatenation
     - panic: Separate sysctl logic from CONFIG_SMP
     - exit: Put an upper limit on how often we can oops
     - exit: Expose "oops_count" to sysfs
     - exit: Allow oops_limit to be disabled
     - panic: Consolidate open-coded panic_on_warn checks
     - panic: Introduce warn_limit
     - panic: Expose "warn_count" to sysfs
     - docs: Fix path paste-o for /sys/kernel/warn_count
     - exit: Use READ_ONCE() for all oops/warn limit reads
     - Bluetooth: hci_sync: cancel cmd_timer if hci_open failed
     - xhci: Set HCD flag to defer primary roothub registration
     - scsi: hpsa: Fix allocation size for scsi_host_alloc()
     - module: Don't wait for GOING modules
     - tracing: Make sure trace_printk() can output as soon as it can be used
     - trace_events_hist: add check for return value of 'create_hist_field'
     - ftrace/scripts: Update the instructions for ftrace-bisect.sh
     - cifs: Fix oops due to uncleared server->smbd_conn in reconnect
     - [x86] KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
     - [x86] thermal: intel: int340x: Protect trip temperature from concurrent
       updates
     - EDAC/device: Respect any driver-supplied workqueue polling value
     - units: Add Watt units
     - units: Add SI metric prefix definitions
     - i2c: designware: Use DIV_ROUND_CLOSEST() macro
     - i2c: designware: use casting of u64 in clock multiplication to avoid
       overflow
     - netlink: prevent potential spectre v1 gadgets
     - net: fix UaF in netns ops registration error path
     - netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
     - netfilter: nft_set_rbtree: skip elements in transaction from garbage
       collection
     - netlink: annotate data races around nlk->portid
     - netlink: annotate data races around dst_portid and dst_group
     - netlink: annotate data races around sk_state
     - ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()
     - ipv4: prevent potential spectre v1 gadget in fib_metrics_match()
     - netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
     - netrom: Fix use-after-free of a listening socket.
     - net/sched: sch_taprio: do not schedule in taprio_reset()
     - sctp: fail if no bound addresses can be used for a given scope
       (CVE-2023-1074)
     - [x86] thermal: intel: int340x: Add locking to
       int340x_thermal_get_trip_type()
     - net/tg3: resolve deadlock in tg3_reset_task() during EEH
     - [arm64,armhf] net: mdio-mux-meson-g12a: force internal PHY off on mux
       switch
     - Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI
       mode"
     - nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
       (Closes: #989705)
     - nfsd: Ensure knfsd shuts down when the "nfsd" pseudofs is unmounted
     - block: fix and cleanup bio_check_ro
     - [x86] i8259: Mark legacy PIC interrupts with IRQ_LEVEL
     - netfilter: conntrack: unify established states for SCTP paths
     - [x86] perf/x86/amd: fix potential integer overflow on shift of a int
     - clk: Fix pointer casting to prevent oops in devm_clk_release()
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.167
     - [armhf] dts: imx: Fix pca9547 i2c-mux node name
     - [arm64] dts: imx8mq-thor96: fix no-mmc property for SDHCI
     - bpf: Skip task with pid=1 in send_signal_common()
     - blk-cgroup: fix missing pd_online_fn() while activating policy
     - [armhf] dmaengine: imx-sdma: Fix a possible memory leak in
       sdma_transfer_init
     - ACPI: processor idle: Practically limit "Dummy wait" workaround to old
       Intel systems
     - Bluetooth: fix null ptr deref on hci_sync_conn_complete_evt
     - net: fix NULL pointer in skb_segment_list
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.168
     - firewire: fix memory leak for payload of request subaction to IEC 61883-1
       FCP region
     - [arm64,armhf] bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
     - bpf: Fix incorrect state pruning for <8B spill/fill
     - [powerpc*] imc-pmu: Revert nest_init_lock to being a mutex
     - bpf: Fix a possible task gone issue with bpf_send_signal[_thread]()
       helpers
     - ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
     - bpf: Support <8-byte scalar spill and refill
     - bpf: Fix to preserve reg parent/live fields when copying range info
     - bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
     - [arm*] drm/vc4: hdmi: make CEC adapter name unique
     - scsi: Revert "scsi: core: map PQ=1, PDT=other values to
       SCSI_SCAN_TARGET_PRESENT"
     - vhost/net: Clear the pending messages when the backend is removed
     - [armhf] WRITE is "data source", not destination...
     - fix iov_iter_bvec() "direction" argument
     - fix "direction" argument of iov_iter_kvec()
     - virtio-net: execute xdp_do_flush() before napi_complete_done()
     - sfc: correctly advertise tunneled IPv6 segmentation
     - net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devices
     - netrom: Fix use-after-free caused by accept on already connected socket
     - netfilter: br_netfilter: disable sabotage_in hook after first suppression
     - squashfs: harden sanity check in squashfs_read_xattr_id_table
     - [arm64] net: phy: meson-gxl: Add generic dummy stubs for MMD register
       access
     - igc: return an error if the mac type is unknown in
       igc_ptp_systim_to_hwtstamp()
     - can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
     - ata: libata: Fix sata_down_spd_limit() when no link speed is reported
     - virtio-net: Keep stop() to follow mirror sequence of open()
     - net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
     - efi: fix potential NULL deref in efi_mem_reserve_persistent
     - qede: add netpoll support for qede driver
     - qede: execute xdp_do_flush() before napi_complete_done()
     - scsi: target: core: Fix warning on RT kernels
     - scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
       (CVE-2023-2162)
     - [arm64,armhf] i2c: rk3x: fix a bunch of kernel-doc warnings
     - [x86] platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010
       table
     - [arm64] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
     - [arm64] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
     - usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
     - vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
     - Input: i8042 - move __initconst to fix code styling warning
     - Input: i8042 - merge quirk tables
     - Input: i8042 - add TUXEDO devices to i8042 quirk tables
     - Input: i8042 - add Clevo PCX0DX to i8042 quirk table
     - fbcon: Check font dimension limits
     - net: qrtr: free memory on error path in radix_tree_insert()
     - [s390x] watchdog: diag288_wdt: do not use stack buffers for hardware data
     - [s390x] watchdog: diag288_wdt: fix __diag288() inline assembly
     - ALSA: hda/realtek: Add Acer Predator PH315-54
     - efi: Accept version 2 of memory attributes table
     - iio: hid: fix the retval in accel_3d_capture_sample
     - iio: imu: fxos8700: fix ACCEL measurement range selection
     - iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback
     - iio: imu: fxos8700: fix IMU data bits returned to user space
     - iio: imu: fxos8700: fix map label of channel type to MAGN sensor
     - iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback
     - iio: imu: fxos8700: fix incorrect ODR mode readback
     - iio: imu: fxos8700: fix failed initialization ODR mode assignment
     - iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
     - iio: imu: fxos8700: fix MAGN sensor scale and unit
     - mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
     - [x86] debug: Fix stack recursion caused by wrongly ordered DR7 accesses
     - mm/swapfile: add cond_resched() in get_swap_pages()
     - Squashfs: fix handling and sanity checking of xattr_ids count
     - [x86] drm/i915: Fix potential bit_17 double-free
     - nvmem: core: initialise nvmem->id early
     - nvmem: core: fix cell removal on error
     - serial: 8250_dma: Fix DMA Rx completion race
     - serial: 8250_dma: Fix DMA Rx rearm race
     - fbdev: smscufx: fix error handling code in ufx_usb_probe
     - f2fs: fix to do sanity check on i_extra_isize in is_alive()
     - wifi: brcmfmac: Check the count value of channel spec to prevent
       out-of-bounds reads
     - nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
     - bpf: Do not reject when the stack read size is different from the tracked
       scalar size
     - mm/migration: return errno when isolate_huge_page failed
     - migrate: hugetlb: check for hugetlb shared PMD in node migration
     - btrfs: limit device extents to the device size
     - btrfs: zlib: zero-initialize zlib workspace
     - ALSA: hda/realtek: Add Positivo N14KP6-TG
     - ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
     - ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
     - tracing: Fix poll() and select() do not work on per_cpu trace_pipe and
       trace_pipe_raw
     - of/address: Return an error when no valid dma-ranges are found
       (Closes: #993612)
     - can: j1939: do not wait 250 ms if the same addr was already claimed
     - [amd64] IB/hfi1: Restore allocated resources on failed copyout
     - IB/IPoIB: Fix legacy IPoIB due to wrong number of queues
     - [amd64] RDMA/usnic: use iommu_map_atomic() under spin_lock()
     - xfrm: fix bug with DSCP copy to v6 from v4 tunnel
     - bonding: fix error checking in bond_debug_reregister()
     - [arm64] net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal
       PHY
     - ice: Do not use WQ_MEM_RECLAIM flag for workqueue
     - [arm64] net: mscc: ocelot: fix VCAP filters not matching on MAC with
       "protocol 802.1Q"
     - net/mlx5e: IPoIB, Show unknown speed instead of error
     - net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers
     - net/mlx5: fw_tracer, Zero consumer index when reloading the tracer
     - rds: rds_rm_zerocopy_callback() use list_first_entry() (CVE-2023-1078)
     - ALSA: pci: lx6464es: fix a debug loop
     - [armhf] pinctrl: aspeed: Fix confusing types in return value
     - [arm64,armhf] pinctrl: single: fix potential NULL dereference
     - [x86] pinctrl: intel: Restore the pins that used to be in Direct IRQ mode
     - cifs: Fix use-after-free in rdata->read_into_pages()
     - net: USB: Fix wrong-direction WARNING in plusb.c
     - btrfs: free device in btrfs_close_devices for a single device filesystem
     - usb: core: add quirk for Alcor Link AK9563 smartcard reader
     - usb: typec: altmodes/displayport: Fix probe pin assign check
     - ceph: flush cap releases when the session is flushed
     - Fix page corruption caused by racy check in __free_pages
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.169
     - [x86] ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
     - ALSA: hda: Do not unset preset when cleaning up codec
     - net/rose: Fix to not accept on connected socket
     - net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoC
     - net: sched: sch: Bounds check priority
     - [s390x] decompressor: specify __decompress() buf len to avoid overflow
     - nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
     - nvmem: core: add error handling for dev_set_name
     - nvmem: core: remove nvmem_config wp_gpio
     - nvmem: core: fix cleanup after dev_set_name()
     - nvmem: core: fix registration vs use race
     - aio: fix mremap after fork null-deref
     - [s390x] signal: fix endless loop in do_signal (Closes: #1031753)
     - ovl: remove privs in ovl_copyfile()
     - ovl: remove privs in ovl_fallocate()
     - netfilter: nft_tproxy: restrict to prerouting hook
     - mmc: sdio: fix possible resource leaks in some error paths
     - [arm64,armhf] mmc: mmc_spi: fix error handling in mmc_spi_probe()
     - ALSA: hda/conexant: add a new hda codec SN6180
     - ALSA: hda/realtek - fixed wrong gpio assigned
     - sched/psi: Fix use-after-free in ep_remove_wait_queue()
     - hugetlb: check for undefined shift on 32 bit architectures
     - Revert "mm: Always release pages to the buddy allocator in
       memblock_free_late()."
     - net: Fix unwanted sign extension in netdev_stats_to_stats64()
     - revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
     - ixgbe: allow to increase MTU to 3K with XDP enabled
     - i40e: add double of VLAN header when computing the max MTU
     - sctp: sctp_sock_filter(): avoid list_entry() on possibly empty list
     - net/sched: tcindex: update imperfect hash filters respecting rcu
       (CVE-2023-1281)
     - dccp/tcp: Avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions.
     - net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
     - net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
     - net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
     - bnxt_en: Fix mqprio and XDP ring checking logic
     - net: stmmac: Restrict warning on disabling DMA store and fwd mode
     - net: mpls: fix stale pointer if allocation fails during device rename
       (CVE-2023-26545)
     - ixgbe: add double of VLAN header when computing the max MTU
     - ipv6: Fix datagram socket connection with DSCP.
     - ipv6: Fix tcp socket connection with DSCP.
     - nilfs2: fix underflow in second superblock position calculations
     - [x86] drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()
     - [x86] drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
     - flow_offload: fill flags to action structure
     - net/sched: act_ctinfo: use percpu stats
     - i40e: Add checking for null for nlmsg_find_attr()
     - net/sched: tcindex: search key must be 16 bits
     - [x86] kvm: initialize all of the kvm_debugregs structure before sending it
       to userspace (CVE-2023-1513)
     - alarmtimer: Prevent starvation by small intervals and SIG_IGN
     - [x86] ASoC: SOF: Intel: hda-dai: fix possible stream_tag leak
     - net: sched: sch: Fix off by one in htb_activate_prios()
     - nvmem: core: fix return value
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.170
     - [armhf] drm/etnaviv: don't truncate physical page address
     - wifi: rtl8xxxu: gen2: Turn on the rate control
     - powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
     - random: always mix cycle counter in add_latent_entropy()
     - [x86] KVM: x86: Fail emulation during EMULTYPE_SKIP on any exception
     - [x86] KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid
     - [x86] KVM: VMX: Execute IBPB on emulated VM-exit when guest has IBRS
       (CVE-2022-2196)
     - [x86] drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
       (CVE-2022-3707)
     - mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
     - uaccess: Add speculation barrier to copy_from_user() (CVE-2023-0459)
     - Revert "Revert "block: nbd: add sanity check for first_minor""
     - nbd: fix max value for 'first_minor'
     - nbd: fix possible overflow for 'first_minor' in nbd_dev_add()
     - nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
     - wifi: mwifiex: Add missing compatible string for SD8787
     - audit: update the mailing list in MAINTAINERS
     - ext4: Fix function prototype mismatch for ext4_feat_ktype
     - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue
       pfifo child qdiscs"
     - bpf: add missing header file include
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.171
     - Fix XFRM-I support for nested ESP tunnels
     - [arm64] dts: rockchip: drop unused LED mode property from rk3328-roc-cc
     - [amd64,arm64] ACPI: NFIT: fix a potential deadlock during NFIT teardown
     - btrfs: send: limit number of clones and allocated memory size
     - [amd64] IB/hfi1: Assign npages earlier
     - neigh: make sure used and confirmed times are valid
     - HID: core: Fix deadloop in hid_apply_multiplier.
     - bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
     - net: Remove WARN_ON_ONCE(sk->sk_forward_alloc) from
       sk_stream_kill_queues().
     - vc_screen: don't clobber return value in vcs_read
     - md: Flush workqueue md_rdev_misc_wq in md_alloc()
     - drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init
       (CVE-2023-22998)
     - drm/virtio: Correct drm_gem_shmem_get_sg_table() error handling
       (CVE-2023-22998)
     - USB: serial: option: add support for VW/Skoda "Carstick LTE"
     - usb: gadget: u_serial: Add null pointer check in gserial_resume
     - USB: core: Don't hold device lock while reading the "descriptors" sysfs
       file
     - io_uring: add missing lock in io_get_file_fixed (CVE-2023-1872)
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.172
     - io_uring: ensure that io_init_req() passes in the right issue_flags
       (CVE-2023-1872)
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.173
     - HID: asus: Remove check for same LED brightness on set
     - HID: asus: use spinlock to protect concurrent accesses
     - HID: asus: use spinlock to safely schedule workers (CVE-2023-1079)
     - [powerpc*] mm: Rearrange if-else block to avoid clang warning
     - [armhf] OMAP2+: Fix memory leak in realtime_counter_init()
     - [arm64] dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
     - [armhf] imx: Call ida_simple_remove() for ida_simple_get
     - [armhf] dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
     - blk-mq: avoid sleep in blk_mq_alloc_request_hctx
     - blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
     - blk-mq: correct stale comment of .get_budget
     - [s390x] dasd: Prepare for additional path event handling
     - [s390x] dasd: Fix potential memleak in dasd_eckd_init()
     - sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
     - sched/rt: pick_next_rt_entity(): check list_entry (CVE-2023-1077)
     - [x86] perf/zhaoxin: Add stepping check for ZXC
     - block: bio-integrity: Copy flags when bio_integrity_payload is cloned
     - wifi: rsi: Fix memory leak in rsi_coex_attach()
     - wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: iwlegacy: common: don't call dev_kfree_skb() under
       spin_lock_irqsave()
     - wifi: libertas: fix memory leak in lbs_init_adapter()
     - wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
     - wifi: rtlwifi: Fix global-out-of-bounds bug in
       _rtl8812ae_phy_set_txpower_limit()
     - wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
     - wifi: ipw2200: fix memory leak in ipw_wdev_init()
     - wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
     - wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
     - wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
     - wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
     - wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
     - [amd64] crypto: x86/ghash - fix unaligned access in ghash_setkey()
     - ACPICA: Drop port I/O validation for some regions
     - genirq: Fix the return type of kstat_cpu_irqs_sum()
     - rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose
     - rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls
     - rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
     - lib/mpi: Fix buffer overrun when SG is too long
     - [amd64] crypto: ccp: Use the stack for small SEV command buffers
     - [amd64] crypto: ccp: Use the stack and common buffer for status commands
     - [amd64] crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent
       kernel memory leak
     - [amd64] crypto: ccp - Avoid page allocation failure warning for
       SEV_GET_ID2
     - ACPICA: nsrepair: handle cases without a return value correctly
     - [arm64] thermal/drivers/tsens: Drop msm8976-specific defines
     - [arm64] thermal/drivers/qcom/tsens_v1: Enable sensor 3 on MSM8976
     - [arm64] thermal/drivers/tsens: Add compat string for the qcom,msm8960
     - [arm64] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
     - wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
     - wifi: orinoco: check return value of hermes_write_wordrec()
     - wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no
       callback function
     - ath9k: hif_usb: simplify if-if to if-else
     - ath9k: htc: clean up statistics macros
     - wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
     - wifi: ath9k: Fix potential stack-out-of-bounds write in
       ath9k_wmi_rsp_callback()
     - wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
     - wifi: cfg80211: Fix extended KCK key length check in
       nl80211_set_rekey_data()
     - ACPI: battery: Fix missing NUL-termination with large strings
     - [amd64] crypto: ccp - Failure on re-initialization due to duplicate sysfs
       filename
     - crypto: essiv - Handle EBUSY correctly
     - crypto: seqiv - Handle EBUSY correctly
     - [x86] powercap: fix possible name leak in powercap_register_zone()
     - [x86] cpu: Init AP exception handling from cpu_init_secondary()
     - [x86] microcode: Replace deprecated CPU-hotplug functions.
     - [x86] Mark stop_this_cpu() __noreturn
     - [x86] microcode: Rip out the OLD_INTERFACE
     - [x86] microcode: Default-disable late loading
     - [x86] microcode: Print previous version of microcode after reload
     - [x86] microcode: Add a parameter to microcode_check() to store CPU
       capabilities
     - [x86] microcode: Check CPU capabilities after late microcode update
       correctly
     - [x86] microcode: Adjust late loading result reporting message
     - crypto: xts - Handle EBUSY correctly
     - leds: led-class: Add missing put_device() to led_put()
     - [amd64] crypto: ccp - Refactor out sev_fw_alloc()
     - [amd64] crypto: ccp - Flush the SEV-ES TMR memory before giving it to
       firmware
     - net/mlx5: Enhance debug print in page allocation failure
     - irqchip: Fix refcount leak in platform_irqchip_probe
     - irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
     - irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
     - irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
     - [s390x] vmem: fix empty page tables cleanup under KASAN
     - net: add sock_init_data_uid()
     - tun: tun_chr_open(): correctly initialize socket uid (CVE-2023-1076)
     - tap: tap_open(): correctly initialize socket uid (CVE-2023-1076)
     - OPP: fix error checking in opp_migrate_dentry()
     - Bluetooth: L2CAP: Fix potential user-after-free
     - rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
     - crypto: rsa-pkcs1pad - Use akcipher_request_complete
     - wifi: iwl3945: Add missing check for create_singlethread_workqueue
     - wifi: iwl4965: Add missing check for create_singlethread_workqueue()
     - wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
     - wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
     - [arm64] thermal/drivers/hisi: Drop second sensor hi3660
     - can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a
       bus error
     - bpf: Fix global subprog context argument resolution logic
     - l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
     - [arm64] net: bcmgenet: fix MoCA LED control
     - drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
     - drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats
     - [arm*] drm/vc4: dpi: Add option for inverting pixel clock and output
       enable
     - [arm*] drm/vc4: dpi: Fix format mapping for RGB565
     - [armhf] gpu: ipu-v3: common: Add of_node_put() for reference returned by
       of_graph_get_port_by_id()
     - [arm64] drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
     - [armhf] pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
     - [arm64,armhf] pinctrl: rockchip: add support for rk3568
     - [arm64,armhf] pinctrl: rockchip: do coding style for mux route struct
     - [arm64,armhf] pinctrl: rockchip: Fix refcount leak in
       rockchip_pinctrl_parse_groups
     - [arm*] drm/vc4: hvs: Set AXI panic modes
     - [arm*] drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5
     - [arm*] drm/vc4: hdmi: Correct interlaced timings again
     - [arm64] ASoC: fsl_sai: initialize is_dsp_mode flag
     - [arm64] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
     - ALSA: hda/ca0132: minor fix for allocation size
     - [arm64] drm/msm/dpu: Disallow unallocated resources to be returned
     - drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
     - [arm64] drm/msm: use strscpy instead of strncpy
     - [arm64] drm/msm/dpu: Add check for cstate
     - [arm64] drm/msm/dpu: Add check for pstates
     - [arm64] drm/msm/mdp5: Add check for kzalloc
     - [arm*] pinctrl: bcm2835: Remove of_node_put() in
       bcm2835_of_gpio_ranges_fallback()
     - [x86] ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
     - drm/amdgpu: fix enum odm_combine_mode mismatch
     - scsi: mpt3sas: Fix a memory leak
     - scsi: aic94xx: Add missing check for dma_map_single()
     - dm: remove flush_scheduled_work() during local_exit()
     - NFS: Fix up handling of outstanding layoutcommit in nfs_update_inode()
     - NFSv4: keep state manager thread active if swap is enabled
     - nfs4trace: fix state manager flag printing
     - NFS: fix disabling of swap
     - HID: bigben: use spinlock to protect concurrent accesses
     - HID: bigben_worker() remove unneeded check on report_field
     - HID: bigben: use spinlock to safely schedule workers (CVE-2023-25012)
     - hid: bigben_probe(): validate report count
     - nfsd: fix race to check ls_layouts
     - cifs: Fix lost destroy smbd connection when MR allocate failed
     - cifs: Fix warning and UAF when destroy the MR list
     - gfs2: jdata writepage fix
     - leds: led-core: Fix refcount leak in of_led_get()
     - [armhf] mtd: rawnand: sunxi: Fix the size of the last OOB region
     - [arm64,armhf] clk: imx: avoid memory leak
     - Input: ads7846 - don't report pressure for ads7845
     - Input: ads7846 - convert to full duplex
     - Input: ads7846 - convert to one message
     - Input: ads7846 - always set last command to PWRDOWN
     - Input: ads7846 - don't check penirq immediately for 7845
     - [powerpc*] powernv/ioda: Skip unallocated resources when mapping to PE
     - clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
     - [powerpc*] perf/hv-24x7: add missing RTAS retry status handling
     - [powerpc*] pseries/lpar: add missing RTAS retry status handling
     - [powerpc*] pseries/lparcfg: add missing RTAS retry status handling
     - [powerpc*] rtas: make all exports GPL
     - [powerpc*] rtas: ensure 4KB alignment for rtas_data_buf
     - [powerpc*] eeh: Small refactor of eeh_handle_normal_event()
     - [powerpc*] eeh: Set channel state after notifying the drivers
     - [armhf] media: platform: ti: Add missing check for devm_regulator_get
     - media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
       (CVE-2023-1118)
     - media: usb: siano: Fix use after free bugs caused by do_submit_urb
     - media: saa7134: Use video_unregister_device for radio_dev
     - [arm64] rpmsg: glink: Avoid infinite loop on intent for missing channel
     - udf: Define EFSCORRUPTED error code
     - blk-iocost: fix divide by 0 error in calc_lcoefs()
     - wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
     - wifi: brcmfmac: Fix potential stack-out-of-bounds in
       brcmf_c_preinit_dcmds()
     - rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks
     - rcu: Suppress smp_processor_id() complaint in
       synchronize_rcu_expedited_wait()
     - rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug
     - wifi: ath11k: debugfs: fix to work with multiple PCI devices
     - [x86] thermal: intel: Fix unsigned comparison with less than zero
     - timers: Prevent union confusion from unexpected restart_syscall()
     - [x86] bugs: Reset speculation control settings on init
     - wifi: brcmfmac: ensure CLM version is null-terminated to prevent
       stack-out-of-bounds
     - wifi: mt7601u: fix an integer underflow
     - inet: fix fast path in __inet_hash_connect()
     - ice: add missing checks for PF vsi type
     - ACPI: Don't build ACPICA with '-Os'
     - clocksource: Suspend the watchdog temporarily when high read latency
       detected
     - net: bcmgenet: Add a check for oversized packets
     - wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
     - ACPI: video: Fix Lenovo Ideapad Z570 DMI match
     - net/mlx5: fw_tracer: Fix debug print
     - coda: Avoid partial allocation of sig_inputArgs
     - uaccess: Add minimum bounds check on kernel buffer size
     - PM: EM: fix memory leak with using debugfs_lookup()
     - Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
     - drm/amd/display: Fix potential null-deref in dm_resume
     - [armhf] drm/omap: dsi: Fix excessive stack usage
     - HID: Add Mapping for System Microphone Mute
     - drm/radeon: free iio for atombios when driver shutdown
     - drm: amd: display: Fix memory leakage
     - [arm64] drm/msm/dsi: Add missing check for alloc_ordered_workqueue
     - [armel,armhf] ASoC: kirkwood: Iterate over array indexes instead of using
       pointer math
     - [armhf] regulator: s5m8767: Bounds check id indexing into arrays
     - gfs2: Improve gfs2_make_fs_rw error handling
     - [x86] hwmon: (coretemp) Simplify platform device handling
     - HID: logitech-hidpp: Don't restart communication if not necessary
     - drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5
     - dm thin: add cond_resched() to various workqueue loops
     - dm cache: add cond_resched() to various workqueue loops
     - nfsd: zero out pointers after putting nfsd_files on COPY setup error
     - wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
     - firmware: coreboot: framebuffer: Ignore reserved pixel color bits
     - [arm64] rtc: pm8xxx: fix set-alarm race
     - ipmi_ssif: Rename idle state and check
     - [s390x] extmem: return correct segment type in __segment_load()
     - [s390x] discard .interp section
     - [s390x] kprobes: fix irq mask clobbering on kprobe reenter from
       post_handler
     - [s390x] kprobes: fix current_kprobe never cleared after kprobes reenter
     - cifs: Fix uninitialized memory read in smb3_qfs_tcon()
     - hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
     - fs: hfsplus: fix UAF issue in hfsplus_put_super
     - exfat: fix reporting fs error when reading dir beyond EOF
     - exfat: fix unexpected EOF while reading dir
     - exfat: redefine DIR_DELETED as the bad cluster number
     - exfat: fix inode->i_blocks for non-512 byte sector size device
     - f2fs: fix information leak in f2fs_move_inline_dirents()
     - f2fs: fix cgroup writeback accounting with fs-layer encryption
     - ocfs2: fix defrag path triggering jbd2 ASSERT
     - ocfs2: fix non-auto defrag path not working issue
     - udf: Truncate added extents on failed expansion
     - udf: Do not bother merging very long extents
     - udf: Do not update file length for failed writes to inline files
     - udf: Preserve link count of system files
     - udf: Detect system inodes linked into directory hierarchy
     - udf: Fix file corruption when appending just after end of preallocated
       extent
     - KVM: Destroy target device if coalesced MMIO unregistration fails
     - [x86] KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI
     - [s390x] KVM: s390: disable migration mode when dirty tracking is disabled
     - [x86] virt: Force GIF=1 prior to disabling SVM (for reboot flows)
     - [x86] crash: Disable virt in core NMI crash handler to avoid double
       shootdown
     - [x86] reboot: Disable virtualization in an emergency if SVM is supported
     - [x86] reboot: Disable SVM, not just VMX, when stopping CPUs
     - [x86] kprobes: Fix __recover_optprobed_insn check optimizing logic
     - [x86] kprobes: Fix arch_check_optimized_kprobe check within
       optimized_kprobe range
     - [x86] microcode/amd: Remove load_microcode_amd()'s bsp parameter
     - [x86] microcode/AMD: Add a @cpu parameter to the reloading functions
     - [x86] microcode/AMD: Fix mixed steppings support
     - [x86] speculation: Allow enabling STIBP with legacy IBRS (CVE-2023-1998)
     - Documentation/hw-vuln: Document the interaction between IBRS and STIBP
     - brd: return 0/-error from brd_insert_page()
     - ima: Align ima_file_mmap() parameters with mmap_file LSM hook
     - irqdomain: Fix association race
     - irqdomain: Fix disassociation race
     - irqdomain: Drop bogus fwspec-mapping error handling
     - io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
     - io_uring: mark task TASK_RUNNING before handling resume/task work
     - io_uring: add a conditional reschedule to the IOPOLL cancelation loop
     - io_uring/rsrc: disallow multi-source reg buffers
     - io_uring: remove MSG_NOSIGNAL from recvmsg
     - io_uring/poll: allow some retries for poll triggering spuriously
     - ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
     - ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
     - jbd2: fix data missing when reusing bh which is ready to be checkpointed
     - ext4: optimize ea_inode block expansion
     - ext4: refuse to create ea block when umounted
     - mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
     - dm: add cond_resched() to dm_wq_work()
     - wifi: rtl8xxxu: Use a longer retry limit of 48
     - wifi: cfg80211: Fix use after free for wext
     - [x86] thermal: intel: powerclamp: Fix cur_state for multi package system
     - dm flakey: fix logic when corrupting a bio
     - dm flakey: don't corrupt the zero page
     - rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
     - dax/kmem: Fix leak of memory-hotplug resources
     - mm: memcontrol: deprecate charge moving
     - mm/thp: check and bail out if page in deferred queue already
     - ring-buffer: Handle race between rb_move_tail and rb_check_pages
     - scsi: qla2xxx: Fix link failure in NPIV environment
     - scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
     - scsi: qla2xxx: Fix erroneous link down
     - scsi: ses: Don't attach if enclosure has no components
     - scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
     - scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
     - scsi: ses: Fix possible desc_ptr out-of-bounds accesses
     - scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
     - PCI/PM: Observe reset delay irrespective of bridge_d3
     - PCI: hotplug: Allow marking devices as disconnected during bind/unbind
     - PCI: Avoid FLR for AMD FCH AHCI adapters
     - vfio/type1: prevent underflow of locked_vm via exec()
     - [x86] drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
     - drm/radeon: Fix eDP for single-display iMac11,2
     - drm/edid: fix AVI infoframe aspect ratio handling
     - wifi: ath9k: use proper statements in conditionals
     - [arm64,armhf] pinctrl: rockchip: fix mux route data for rk3568
     - [arm64,armhf] pinctrl: rockchip: fix reading pull type on rk3568
     - net/sched: Retire tcindex classifier (CVE-2023-1829)
     - fs/jfs: fix shift exponent db_agl2size negative
     - objtool: Fix memory leak in create_static_call_sections()
     - [armhf] pwm: stm32-lp: fix the check on arr and cmp registers update
     - f2fs: use memcpy_{to,from}_page() where possible
     - fs: f2fs: initialize fsdata in pagecache_write()
     - ubi: ensure that VID header offset + VID header size <= alloc, size
     - ubifs: Fix build errors as symbol undefined
     - ubifs: Rectify space budget for ubifs_symlink() if symlink is encrypted
     - ubifs: Rectify space budget for ubifs_xrename()
     - ubifs: Fix wrong dirty space budget for dirty inode
     - ubifs: do_rename: Fix wrong space budget when target inode's nlink > 1
     - ubifs: Reserve one leb for each journal head while doing budget
     - ubi: Fix use-after-free when volume resizing failed
     - ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume()
     - ubifs: Fix memory leak in alloc_wbufs()
     - ubi: Fix possible null-ptr-deref in ubi_free_volume()
     - ubifs: Re-statistic cleaned znode count if commit failed
     - ubifs: dirty_cow_znode: Fix memleak in error handling path
     - ubifs: ubifs_writepage: Mark page dirty after writing inode failed
     - ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling
       fastmap
     - ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
     - ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
     - [x86] um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
     - watchdog: Fix kmemleak in watchdog_cdev_register
     - watchdog: pcwd_usb: Fix attempting to access uninitialized memory
     - netfilter: ctnetlink: fix possible refcount leak in
       ctnetlink_create_conntrack()
     - netfilter: ebtables: fix table blob use-after-free
     - ipv6: Add lwtunnel encap size of all siblings in nexthop calculation
     - sctp: add a refcnt in sctp_stream_priorities to avoid a nested loop
     - net: fix __dev_kfree_skb_any() vs drop monitor
     - 9p/xen: fix version parsing
     - 9p/xen: fix connection sequence
     - 9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
     - net/mlx5: Geneve, Fix handling of Geneve object id as error code
     - nfc: fix memory leak of se_io context in nfc_genl_se_io
     - net/sched: act_sample: fix action bind logic
     - tcp: tcp_check_req() can be called from process context
     - vc_screen: modify vcs_size() handling in vcs_read()
     - [arm64,armhf] rtc: sun6i: Always export the internal oscillator
     - scsi: ipr: Work around fortify-string warning
     - loop: loop_set_status_from_info() check before assignment
     - tracing: Add NULL checks for buffer in ring_buffer_free_read_page()
     - [x86] firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
     - bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC
       support
     - [amd64] IB/hfi1: Update RMT size calculation
     - media: uvcvideo: Handle cameras with invalid descriptors
     - media: uvcvideo: Handle errors from calls to usb_string
     - media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910
     - media: uvcvideo: Silence memcpy() run-time false positive warnings
     - tty: fix out-of-bounds access in tty_driver_lookup_tty()
     - tty: serial: fsl_lpuart: disable the CTS when send break signal
     - [x86] mei: bus-fixup:upon error print return values of send and receive
     - iio: accel: mma9551_core: Prevent uninitialized variable in
       mma9551_read_status_word()
     - iio: accel: mma9551_core: Prevent uninitialized variable in
       mma9551_read_config_word()
     - [arm64,armhf] usb: host: xhci: mvebu: Iterate over array indexes instead
       of using pointer math
     - USB: ene_usb6250: Allocate enough memory for full object
     - usb: uvc: Enumerate valid values for color matching
     - usb: gadget: uvc: Make bSourceID read/write
     - PCI: Align extra resources for hotplug bridges properly
     - PCI: Take other bus devices into account when distributing resources
     - kernel/fail_function: fix memory leak with using debugfs_lookup()
     - PCI: Add ACS quirk for Wangxun NICs
     - [arm64] phy: rockchip-typec: Fix unsigned comparison with less than zero
     - soundwire: cadence: Remove wasted space in response_buf
     - soundwire: cadence: Drain the RX FIFO after an IO timeout
     - [x86] resctrl: Apply READ_ONCE/WRITE_ONCE to task_struct.{rmid,closid}
     - [x86] resctl: fix scheduler confusion with 'current'
     - drm/display/dp_mst: Fix down/up message handling after sink disconnect
     - drm/display/dp_mst: Fix down message handling after a packet reception
       error
     - Bluetooth: hci_sock: purge socket queues in the destruct() callback
     - tcp: Fix listen() regression in 5.10.163
     - drm/virtio: Fix error code in virtio_gpu_object_shmem_init()
     - media: uvcvideo: Provide sync and async uvc_ctrl_status_event
     - media: uvcvideo: Fix race condition with usb_kill_urb
     - Revert "scsi: mpt3sas: Fix return value check of dma_get_required_mask()"
     - scsi: mpt3sas: Don't change DMA mask while reallocating pools
     - scsi: mpt3sas: re-do lost mpt3sas DMA mask fix
     - scsi: mpt3sas: Remove usage of dma_get_required_mask() API
       (Closes: #1022126)
     - malidp: Fix NULL vs IS_ERR() checking (CVE-2023-23004)
     - usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.174
     - wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for
       wext"
     - [x86] staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a
       script
     - [x86] staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.175
     - fs: prevent out-of-bounds array speculation when closing a file descriptor
     - fork: allow CLONE_NEWTIME in clone3 flags
     - [x86] CPU/AMD: Disable XSAVES on AMD family 0x17
     - drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
     - drm/connector: print max_requested_bpc in state debugfs
     - ext4: fix cgroup writeback accounting with fs-layer encryption
     - ext4: fix RENAME_WHITEOUT handling for inline directories
     - ext4: fix another off-by-one fsmap error on 1k block filesystems
     - ext4: move where set the MAY_INLINE_DATA flag is set
     - ext4: fix WARNING in ext4_update_inline_data
     - ext4: zero i_disksize when initializing the bootloader inode
     - nfc: change order inside nfc_se_io error path
     - udf: Fix off-by-one error when discarding preallocation
     - irq: Fix typos in comments
     - irqdomain: Look for existing mapping only once
     - irqdomain: Refactor __irq_domain_alloc_irqs()
     - irqdomain: Fix mapping-creation race
     - irqdomain: Change the type of 'size' in __irq_domain_add() to be
       consistent
     - irqdomain: Fix domain registration race
     - [amd64] iommu/vt-d: Fix lockdep splat in intel_pasid_get_entry()
     - [amd64] iommu/vt-d: Fix PASID directory pointer coherency
     - [arm64] efi: Make efi_rt_lock a raw_spinlock
     - scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
     - ext4: Fix possible corruption when moving a directory
     - drm/nouveau/kms/nv50-: remove unused functions
     - drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype
     - [arm64] drm/msm: Fix potential invalid ptr free
     - [arm64] drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register
     - [arm64] drm/msm: Document and rename preempt_lock
     - [arm64] drm/msm/a5xx: fix the emptyness check in the preempt code
     - [arm64] drm/msm/a5xx: fix context faults during ring switch
     - ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
     - net: usb: lan78xx: Remove lots of set but unused 'ret' variables
     - net: lan78xx: fix accessing the LAN7800's internal phy specific registers
       from the MAC driver
     - net: stmmac: add to set device wake up flag when stmmac init phy
     - net: phylib: get rid of unnecessary locking
     - bnxt_en: Avoid order-5 memory allocation for TPA data
     - netfilter: ctnetlink: revert to dumping mark regardless of event type
     - netfilter: tproxy: fix deadlock due to missing BH disable
     - btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
     - scsi: megaraid_sas: Update max supported LD IDs to 240
     - net/smc: fix fallback failed while sendmsg with fastopen
     - SUNRPC: Fix a server shutdown leak
     - ext4: Fix deadlock during directory rename
     - [amd64] iommu/amd: Add a length limitation for the ivrs_acpihid
       command-line parameter
     - watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
     - tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
     - block, bfq: fix possible uaf for 'bfqq->bic'
     - block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
     - block/bfq-iosched.c: use "false" rather than "BLK_RW_ASYNC"
     - block, bfq: replace 0/1 with false/true in bic apis
     - block, bfq: fix uaf for bfqq in bic_set_bfqq()
     - PCI: Add SolidRun vendor ID
     - [armhf] media: rc: gpio-ir-recv: add remove function
     - ipmi/watchdog: replace atomic_add() and atomic_sub()
     - ipmi:watchdog: Set panic count to proper value on a panic
     - skbuff: Fix nfct leak on napi stolen
     - [x86] drm/i915: Don't use BAR mappings for ring buffers with LLC
     - ext4: refactor ext4_free_blocks() to pull out ext4_mb_clear_bb()
     - ext4: add ext4_sb_block_valid() refactored out of ext4_inode_block_valid()
     - ext4: add strict range checks while freeing blocks
     - ext4: block range must be validated before use in ext4_mb_clear_bb()
     - arch: fix broken BuildID for arm64 and riscv
     - [powerpc*] vmlinux.lds: Define RUNTIME_DISCARD_EXIT
     - [powerpc*] vmlinux.lds: Don't discard .rela* for relocatable builds
     - [s390x] define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
     - [x86] KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
     - [x86] KVM: VMX: Introduce vmx_msr_bitmap_l01_changed() helper
     - [x86] KVM: VMX: Fix crash due to uninitialized current_vmcs
     - [s390x] dasd: add missing discipline function
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.176
     - xfrm: Allow transport-mode states with AF_UNSPEC selector
     - [arm64,armhf] drm/panfrost: Don't sync rpm suspension after mmu flushing
     - cifs: Move the in_send statistic to __smb_send_rqst()
     - [arm64] drm/meson: fix 1px pink line on GXM when scaling video overlay
     - docs: Correct missing "d_" prefix for dentry_operations member
       d_weak_revalidate
     - scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()
     - ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()
     - netfilter: nft_nat: correct length for loading protocol registers
     - netfilter: nft_masq: correct length for loading protocol registers
     - netfilter: nft_redir: correct length for loading protocol registers
     - netfilter: nft_redir: correct value of inet type `.maxattrs`
     - scsi: core: Fix a comment in function scsi_host_dev_release()
     - scsi: core: Fix a procfs host directory removal regression
     - tcp: tcp_make_synack() can be called from process context
     - nfc: pn533: initialize struct pn533_out_arg properly
     - ipvlan: Make skb->skb_iif track skb->dev for l3s mode
     - i40e: Fix kernel crash during reboot when adapter is in recovery mode
     - net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()
     - qed/qed_dev: guard against a possible division by zero
     - net: tunnels: annotate lockless accesses to dev->needed_headroom
     - net: phy: smsc: bail out in lan87xx_read_status if genphy_read_status
       fails
     - net/smc: fix deadlock triggered by cancel_delayed_work_syn()
     - net: usb: smsc75xx: Limit packet length to skb->len
     - drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts
       kdoc
     - nvme: fix handling single range discard request
     - nvmet: avoid potential UAF in nvmet_req_complete()
     - ice: xsk: disable txq irq before flushing hw
     - net: dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
     - ipv4: Fix incorrect table ID in IOCTL path
     - net: usb: smsc75xx: Move packet length check to prevent kernel panic in
       skb_pull
     - [s390x] net/iucv: Fix size of interrupt data
     - qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
     - hwmon: (adt7475) Display smoothing attributes in correct order
     - hwmon: (adt7475) Fix masking of hysteresis registers
     - [arm64] hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to
       race condition (CVE-2023-1855)
     - jffs2: correct logic when creating a hole in jffs2_write_begin
     - ext4: fail ext4_iget if special inode unallocated
     - ext4: fix task hung in ext4_xattr_delete_inode
     - drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
     - ext4: fix possible double unlock when moving a directory
     - [arm64] tty: serial: fsl_lpuart: skip waiting for transmission complete
       when UARTCTRL_SBK is asserted
     - [arm64] firmware: xilinx: don't make a sleepable memory allocation from an
       atomic context
     - tracing: Make splice_read available again
     - tracing: Check field value in hist_field_name()
     - tracing: Make tracepoint lockdep check actually test something
     - cifs: Fix smb2_set_path_size()
     - [x86] KVM: nVMX: add missing consistency checks for CR0 and CR4
       (CVE-2023-30456)
     - ALSA: hda: intel-dsp-config: add MTL PCI id
     - ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro
     - drm/shmem-helper: Remove another errant put in error path
     - ftrace: Fix invalid address access in lookup_rec() when index is 0
     - mm/userfaultfd: propagate uffd-wp bit when PTE-mapping the huge zeropage
     - [x86] mce: Make sure logged MCEs are processed after sysfs update
     - [x86] mm: Fix use of uninitialized buffer in sme_enable()
     - [x86] drm/i915: Don't use stolen memory for ring buffers with LLC
     - [x86] drm/i915/active: Fix misuse of non-idle barriers as fence trackers
     - io_uring: avoid null-ptr-deref in io_arm_poll_handler
     - [s390x] ipl: add missing intersection check to ipl_report handling
     - PCI: Unify delay handling for reset and resume
     - PCI/DPC: Await readiness of secondary bus after reset
     - xfs: don't assert fail on perag references on teardown
     - xfs: purge dquots after inode walk fails during quotacheck
     - xfs: don't leak btree cursor when insrec fails after a split
     - xfs: remove XFS_PREALLOC_SYNC
     - xfs: fallocate() should call file_modified()
     - xfs: set prealloc flag in xfs_alloc_file_space()
     - xfs: use setattr_copy to set vfs inode attributes
     - fs: add mode_strip_sgid() helper
     - fs: move S_ISGID stripping into the vfs_*() helpers
     - attr: add in_group_or_capable()
     - fs: move should_remove_suid()
     - attr: add setattr_should_drop_sgid()
     - attr: use consistent sgid stripping checks
     - fs: use consistent setgid checks in is_sxid()
     - xfs: remove xfs_setattr_time() declaration
     - HID: core: Provide new max_buffer_size attribute to over-ride the default
     - HID: uhid: Over-ride the default maximum data buffer value with our own
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.177
     - perf/core: Fix perf_output_begin parameter is incorrectly invoked in
       perf_event_bpf_output
     - perf: fix perf_event_context->time
     - ipmi:ssif: make ssif_i2c_send() void
     - ipmi:ssif: Increase the message retry time
     - ipmi:ssif: resend_msg() cannot fail
     - ipmi:ssif: Add a timer between request retries
     - KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
     - KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking
       vCPUs
     - KVM: Optimize kvm_make_vcpus_request_mask() a bit
     - KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()
     - KVM: Register /dev/kvm as the _very_ last thing during initialization
     - [arm64] serial: fsl_lpuart: Fix comment typo
     - [arm64] tty: serial: fsl_lpuart: fix race on RX DMA shutdown
     - [arm64,armhf] drm/sun4i: fix missing component unbind on bind errors
     - net: tls: fix possible race condition between do_tls_getsockopt_conf() and
       do_tls_setsockopt_conf() (CVE-2023-28466)
     - [x86] power: supply: bq24190_charger: using pm_runtime_resume_and_get
       instead of pm_runtime_get_sync
     - [x86] power: supply: bq24190: Fix use after free bug in bq24190_remove due
       to race condition
     - [armhf] dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
     - xsk: Add missing overflow check in xdp_umem_reg
     - iavf: fix inverted Rx hash condition leading to disabled hash
     - iavf: fix non-tunneled IPv6 UDP packet type and hashing
     - intel/igbvf: free irq on the error path in igbvf_request_msix()
     - igbvf: Regard vf reset nack as success
     - igc: fix the validation logic for taprio's gate list
     - scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
     - net: usb: smsc95xx: Limit packet length to skb->len
     - qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
     - [x86] xirc2ps_cs: Fix use after free bug in xirc2ps_detach (CVE-2023-1670)
     - net: phy: Ensure state transitions are processed from phy_stop()
     - net: mdio: fix owner field for mdio buses registered using device-tree
     - [arm64] net: qcom/emac: Fix use after free bug in emac_remove due to race
       condition
     - keys: Do not cache key in task struct if key is requested from kernel
       thread
     - bpf: Adjust insufficient default bpf_jit_limit
     - net/mlx5: Fix steering rules cleanup
     - net/mlx5: Read the TC mapping of all priorities on ETS query
     - net/mlx5: E-Switch, Fix an Oops in error handling code
     - atm: idt77252: fix kmemleak when rmmod idt77252
     - erspan: do not use skb_mac_header() in ndo_start_xmit()
     - nvme-tcp: fix nvme_tcp_term_pdu to match spec
     - [amd64,arm64] gve: Cache link_speed value from device
     - [arm64] net: mdio: thunder: Add missing fwnode_handle_put()
     - [arm64] Bluetooth: btqcomsmd: Fix command timeout after setting BD address
     - Bluetooth: L2CAP: Fix not checking for maximum number of DCID
     - Bluetooth: L2CAP: Fix responding with wrong PDU type
     - Bluetooth: btsdio: fix use after free bug in btsdio_remove due to
       unfinished work (CVE-2023-1989)
     - [arm64] platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl
     - hwmon: fix potential sensor registration fail if of_node is missing
     - [x86] hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
     - scsi: qla2xxx: Perform lockless command completion in abort path
     - [x86] thunderbolt: Use scale field when allocating USB3 bandwidth
     - [x86] thunderbolt: Use const qualifier for `ring_interrupt_index`
     - HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
     - scsi: target: iscsi: Fix an error message in iscsi_check_key()
     - [arm64] scsi: hisi_sas: Check devm_add_action() return value
     - scsi: ufs: core: Add soft dependency on governor_simpleondemand
     - scsi: lpfc: Avoid usage of list iterator variable after loop
     - [x86] scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
     - net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
     - net: usb: qmi_wwan: add Telit 0x1080 composition
     - cifs: empty interface list when server doesn't support query interfaces
     - scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
     - [arm*] usb: dwc2: fix a devres leak in hw_enable upon suspend resume
     - usb: gadget: u_audio: don't let userspace block driver unbind
     - fsverity: Remove WQ_UNBOUND from fsverity read workqueue
     - igb: revert rtnl_lock() that causes deadlock
     - dm thin: fix deadlock when swapping to thin device
     - [arm64,armhf] usb: chipdea: core: fix return -EINVAL if request role is
       the same with current role
     - [arm64,armhf] usb: chipidea: core: fix possible concurrent when switch
       role
     - usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()
     - wifi: mac80211: fix qos on mesh interfaces
     - nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
     - [x86] drm/i915/active: Fix missing debug object activation
     - [x86] drm/i915: Preserve crtc_state->inherited during state clearing
     - [arm64] i2c: xgene-slimpro: Fix out-of-bounds bug in
       xgene_slimpro_i2c_xfer() (CVE-2023-2194)
     - dm stats: check for and propagate alloc_percpu failure
     - dm crypt: add cond_resched() to dmcrypt_write()
     - sched/fair: sanitize vruntime of entity being placed
     - sched/fair: Sanitize vruntime of entity being migrated
     - ocfs2: fix data corruption after failed write
     - xfs: shut down the filesystem if we screw up quota reservation
     - xfs: don't reuse busy extents on extent trim
     - KVM: fix memoryleak in kvm_init()
     - NFSD: fix use-after-free in __nfs42_ssc_open() (CVE-2022-4379)
     - [arm64,armhf] usb: dwc3: gadget: move cmd_endtransfer to extra function
     - [arm64,armhf] usb: dwc3: gadget: Add 1ms delay after end transfer command
       without IOC
     - [arm64] drm/meson: Fix error handling when afbcd.ops->init fails
     - [arm64] drm/meson: fix missing component unbind on bind errors
     - dm crypt: avoid accessing uninitialized tasklet
     - fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY
     - md: avoid signed overflow in slot_store()
     - [x86] ALSA: asihpi: check pao in control_message()
     - ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
     - sched_getaffinity: don't assume 'cpumask_size()' is fully initialized
     - tracing: Fix wrong return in kprobe_event_gen_test.c
     - sfc: ef10: don't overwrite offload features at NIC reset
     - scsi: megaraid_sas: Fix crash after a double completion
     - [arm64] ptp_qoriq: fix memory leak in probe()
     - r8169: fix RTL8168H and RTL8107E rx crc error
     - [arm*] regulator: Handle deferred clk
     - net/net_failover: fix txq exceeding warning
     - net: stmmac: don't reject VLANs when IFF_PROMISC is set
     - ALSA: ymfpci: Fix assignment in if condition
     - ALSA: ymfpci: Fix BUG_ON in probe function
     - i40e: fix registers dump after run ethtool adapter self test
     - bnxt_en: Fix typo in PCI id to device description string mapping
     - bnxt_en: Add missing 200G link speed reporting
     - [arm64,armhf] net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
     - Input: alps - fix compatibility with -funsigned-char
     - Input: focaltech - use explicitly signed char type
     - cifs: prevent infinite recursion in CIFSGetDFSRefer()
     - cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
     - Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table
     - btrfs: fix race between quota disable and quota assign ioctls
       (CVE-2023-1611)
     - xen/netback: don't do grant copy across page boundary
     - pinctrl: amd: Disable and mask interrupts on resume
     - [powerpc*] Don't try to copy PPR for task with NULL pt_regs
     - NFSv4: Fix hangs when recovering open state after a server reboot
     - ALSA: hda/conexant: Partial revert of a quirk for Lenovo
     - ALSA: usb-audio: Fix regression on detection of Roland VS-100
     - ALSA: hda/realtek: Add quirk for Lenovo ZhaoYang CF4620Z
     - rcu: Fix rcu_torture_read ftrace event
     - [armhf] drm/etnaviv: fix reference leak when mmaping imported buffer
     - drm/amd/display: Add DSC Support for Synaptics Cascaded MST Hub
     - [s390x] uaccess: add missing earlyclobber annotations to __clear_user()
     - btrfs: scan device in non-exclusive mode
     - zonefs: Fix error message in zonefs_file_dio_append()
     - ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
     - gfs2: Always check inode size of inline inodes
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.178
     - [x86] Drivers: vmbus: Check for channel allocation before looking up
       relids
     - [arm64] pwm: cros-ec: Explicitly set .polarity in .get_state()
     - [s390x] KVM: s390: pv: fix external interruption loop not always detected
     - wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded
       sta
     - icmp: guard against too small mtu
     - net: don't let netpoll invoke NAPI if in xmit context
     - sctp: check send stream number after wait_for_sndbuf
     - ipv6: Fix an uninit variable access bug in __ip6_make_skb()
     - net: stmmac: fix up RX flow hash indirection table when setting channels
     - sunrpc: only free unix grouplist after RCU settles
     - NFSD: callback request does not use correct credential for AUTH_SYS
     - [arm64,armhf] usb: xhci: tegra: fix sleep in atomic call
     - xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
     - USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs
     - usb: typec: altmodes/displayport: Fix configure initial pin assignment
     - USB: serial: option: add Telit FE990 compositions
     - USB: serial: option: add Quectel RM500U-CN modem
     - iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
     - iio: light: cm32181: Unregister second I2C client if present
     - [arm64] tty: serial: fsl_lpuart: avoid checking for transfer complete when
       UARTCTRL_SBK is asserted in lpuart32_tx_empty
     - nilfs2: fix potential UAF of struct nilfs_sc_info in
       nilfs_segctor_thread()
     - nilfs2: fix sysfs interface lifetime
     - dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
     - ALSA: hda/realtek: Add quirk for Clevo X370SNW
     - iio: adc: ad7791: fix IRQ flags
     - scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
     - perf/core: Fix the same task check in perf_event_set_output
     - ftrace: Mark get_lock_parent_ip() __always_inline
     - ftrace: Fix issue that 'direct->addr' not restored in
       modify_ftrace_direct()
     - can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
     - can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
     - tracing: Free error logs of tracing instances
     - ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
     - [arm64,armhf] drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error
       path
     - drm/nouveau/disp: Support more modes by checking with lower bpc
     - ring-buffer: Fix race while reader and writer are on the same page
     - mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
     - ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
     - bpftool: Print newline before '}' for struct with padding only fields
     - Revert "pinctrl: amd: Disable and mask interrupts on resume"
     - ALSA: emu10k1: fix capture interrupt handler unlinking
     - ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
     - ALSA: i2c/cs8427: fix iec958 mixer control deactivation
     - ALSA: firewire-tascam: add missing unwind goto in
       snd_tscm_stream_start_duplex()
     - ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
     - Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
     - Bluetooth: Fix race condition in hidp_session_thread
     - btrfs: print checksum type and implementation at mount time
     - btrfs: fix fast csum implementation detection
     - fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
     - mtdblock: tolerate corrected bit-flips
     - [armhf] mtd: rawnand: stm32_fmc2: remove unsupported EDO mode
     - [armhf] mtd: rawnand: stm32_fmc2: use timings.mode instead of checking
       tRC_min
     - IB/mlx5: Add support for NDR link speed
     - IB/mlx5: Add support for 400G_8X lane speed
     - RDMA/cma: Allow UD qp_type to join multicast only
     - 9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race
       condition (CVE-2023-1859)
     - niu: Fix missing unwind goto in niu_alloc_channels()
     - sysctl: add proc_dou8vec_minmax()
     - ipv4: shrink netns_ipv4 with sysctl conversions
     - tcp: convert elligible sysctls to u8
     - tcp: restrict net.ipv4.tcp_app_win
     - [armhf] drm/armada: Fix a potential double free in an error handling path
     - qlcnic: check pci_reset_function result
     - sctp: fix a potential overflow in sctp_ifwdtsn_skip
     - RDMA/core: Fix GID entry ref leak when create_ah fails
     - udp6: fix potential access to stale information
     - [arm64] net: macb: fix a memory corruption in extended buffer descriptor
       mode
     - [arm64] power: supply: cros_usbpd: reclassify "default case!" as debug
     - wifi: mwifiex: mark OF related data as maybe unused
     - [x86] efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
     - drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
     - [amd64] verify_pefile: relax wrapper length check
     - asymmetric_keys: log on fatal failures in PE/pkcs7
     - net: sfp: initialize sfp->i2c_block_size at sfp allocation
     - scsi: ses: Handle enclosure with just a primary component gracefully
     - [x86] PCI: Add quirk for AMD XHCI controller that loses MSI-X state in
       D3hot
     - cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
     - ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size
     - mtd: ubi: wl: Fix a couple of kernel-doc issues
     - ubi: Fix deadlock caused by recursively holding work_sem
     - [powerpc*] pseries: rename min_common_depth to primary_domain_index
     - [powerpc*] pseries: Rename TYPE1_AFFINITY to FORM1_AFFINITY
     - [powerpc*] pseries: Consolidate different NUMA distance update code paths
     - [powerpc*] pseries: Add a helper for form1 cpu distance
     - [powerpc*] pseries: Add support for FORM2 associativity
     - [powerpc*] papr_scm: Update the NUMA distance table for the target node
     - sched/fair: Move calculate of avg_load to a better location
     - sched/fair: Fix imbalance overflow
     - [x86] rtc: Remove __init for runtime functions
     - i2c: ocores: generate stop condition after timeout in polling mode
     - [arm64] watchdog: sbsa_wdog: Make sure the timeout programming is within
       the limits
     - kbuild: check the minimum assembler version in Kconfig
     - kbuild: Switch to 'f' variants of integrated assembler flag
     - kexec: move locking into do_kexec_load
     - kexec: turn all kexec_mutex acquisitions into trylocks
     - panic, kexec: make __crash_kexec() NMI safe
     - sysctl: Fix data-races in proc_dou8vec_minmax().
 .
   [ Salvatore Bonaccorso ]
   * Refresh "security,perf: Allow further restriction of perf_event_open"
   * [rt] Update to 5.10.165-rt81
   * Bump ABI to 22
   * [rt] Refresh "printk: add pr_flush()"
   * [rt] Update to 5.10.168-rt83
   * [rt] Update to 5.10.176-rt86
Checksums-Sha1:
 09ac3c6910ff3dfd53cdd95bfe143f2f3b8d43cb 197238 linux_5.10.178-1.dsc
 a31aa7fc53607e61a8bb19301dad0e0460633fc1 121884100 linux_5.10.178.orig.tar.xz
 9ede16ff2a9c47771d8ed87d7a667b2b9f5f9d28 1591356 linux_5.10.178-1.debian.tar.xz
 aa7cf875f23c5ef2f93670c154f5b7650c43ca2b 6703 linux_5.10.178-1_source.buildinfo
Checksums-Sha256:
 d4eeb2673c7c0d3787a49af25e90dc6e4fce6170106c7f87f8d5318a9aee9a7f 197238 linux_5.10.178-1.dsc
 fbe0da13d8833aff65017c9ce6e8cced3149a30a57bd75ec3dc623fb1caa63c4 121884100 linux_5.10.178.orig.tar.xz
 4b36d63f315327f27e5657fddb76ea9b0d4577f7119b255f8d8b19f0f839a855 1591356 linux_5.10.178-1.debian.tar.xz
 ee681ab081778730178b846006d6523fd94dcbd3fa0b9696332d70e3dbecbd43 6703 linux_5.10.178-1_source.buildinfo
Files:
 c8f0b3144597ca9a26b872535e45a915 197238 kernel optional linux_5.10.178-1.dsc
 c55ab1615fbf46296f532f127209592c 121884100 kernel optional linux_5.10.178.orig.tar.xz
 01dadd7b4164540abf2c9d1a8ad33e13 1591356 kernel optional linux_5.10.178-1.debian.tar.xz
 652b74b998d25bfdcce726d30a1b1d5b 6703 kernel optional linux_5.10.178-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=6Swp
-----END PGP SIGNATURE-----

--- End Message ---

Reply to: