Bug#1038706: linux-image-6.1.0-9-amd64: Kernel logs "usb 3-1: 1:1: cannot set freq 48000 to ep 0x3" error on boot
Package: src:linux
Version: 6.1.27-1
Severity: minor
X-Debbugs-Cc: splashed_overbuilt840@simplelogin.com
Dear Maintainer,
During boot the kernel logs the "usb 3-1: 1:1: cannot set freq 48000 to
ep 0x3" error message.
Overall, the boot process is succesful and all USB
devices seem to work fine, but still this error indicates that something
is wrong and is probably worth investigation.
-- Package-specific info:
** Version:
Linux version 6.1.0-9-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.27-1 (2023-05-08)
** Command line:
BOOT_IMAGE=/vmlinuz-6.1.0-9-amd64 root=/dev/mapper/MainVG-root ro quiet splash
** Not tainted
** Kernel log:
[ 479.636601] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[ 480.008306] [drm] Fence fallback timer expired on ring sdma0
[ 480.520309] [drm] Fence fallback timer expired on ring sdma0
[ 481.032305] [drm] Fence fallback timer expired on ring sdma0
[ 481.544314] [drm] Fence fallback timer expired on ring sdma0
[ 482.056324] [drm] Fence fallback timer expired on ring sdma0
[ 482.568310] [drm] Fence fallback timer expired on ring sdma0
[ 483.080313] [drm] Fence fallback timer expired on ring sdma0
[ 483.592323] [drm] Fence fallback timer expired on ring sdma0
[ 483.712314] [drm] UVD and UVD ENC initialized successfully.
[ 483.812295] [drm] VCE initialized successfully.
[ 483.822022] PM: hibernation: Basic memory bitmaps freed
[ 483.822235] OOM killer enabled.
[ 483.822236] pci_bus 0000:05: Allocating resources
[ 483.822236] Restarting tasks ...
[ 483.822238] pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 483.822242] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 483.822244] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 483.822247] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
[ 483.822249] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
[ 483.822251] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 483.822252] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 483.822265] pci 0000:04:00.0: BAR 13: no space for [io size 0x1000]
[ 483.822267] pci 0000:04:00.0: BAR 13: failed to assign [io size 0x1000]
[ 483.822268] pci 0000:04:00.0: BAR 14: no space for [mem size 0x00200000]
[ 483.822269] pci 0000:04:00.0: BAR 14: failed to assign [mem size 0x00200000]
[ 483.822270] pci 0000:04:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 483.822272] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 483.822273] pci 0000:04:00.0: BAR 13: no space for [io size 0x1000]
[ 483.822294] pci 0000:04:00.0: BAR 13: failed to assign [io size 0x1000]
[ 483.822295] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 483.825046] done.
[ 483.888379] PM: hibernation: hibernation exit
[ 483.920467] Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[ 484.120508] r8169 0000:06:00.0 enp6s0: Link is Down
[ 487.539407] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control off
[ 487.539436] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 3805
board_vendor: ASUSTeK COMPUTER INC.
board_name: Z170-K
board_version: Rev X.0x
** Loaded modules:
xt_CHECKSUM
xt_MASQUERADE
nft_chain_nat
nf_nat
bridge
stp
llc
qrtr
binfmt_misc
ip6t_REJECT
nf_reject_ipv6
xt_hl
ip6_tables
ip6t_rt
ipt_REJECT
nf_reject_ipv4
xt_LOG
nf_log_syslog
xt_comment
nft_limit
xt_limit
xt_addrtype
xt_tcpudp
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_compat
nf_tables
libcrc32c
nfnetlink
nls_ascii
nls_cp437
vfat
fat
intel_rapl_msr
snd_hda_codec_realtek
intel_rapl_common
x86_pkg_temp_thermal
snd_hda_codec_generic
intel_powerclamp
coretemp
snd_hda_codec_hdmi
snd_usb_audio
snd_hda_intel
snd_intel_dspcfg
kvm_intel
snd_intel_sdw_acpi
snd_hda_codec
snd_usbmidi_lib
uvcvideo
snd_hda_core
snd_rawmidi
kvm
snd_hwdep
snd_seq_device
eeepc_wmi
asus_wmi
videobuf2_vmalloc
videobuf2_memops
snd_pcm
videobuf2_v4l2
irqbypass
platform_profile
mei_hdcp
videobuf2_common
iTCO_wdt
battery
snd_timer
rapl
intel_pmc_bxt
intel_cstate
sparse_keymap
videodev
mei_me
ledtrig_audio
snd
iTCO_vendor_support
intel_uncore
rfkill
pcspkr
wmi_bmof
mc
watchdog
ee1004
mei
soundcore
intel_pmc_core
acpi_pad
evdev
sg
parport_pc
ppdev
lp
parport
fuse
loop
efi_pstore
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
dm_crypt
dm_mod
hid_logitech_hidpp
hid_logitech_dj
hid_generic
usbhid
hid
sd_mod
t10_pi
crc64_rocksoft_generic
crc64_rocksoft
crc_t10dif
crct10dif_generic
crc64
amdgpu
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
sha512_ssse3
sha512_generic
gpu_sched
drm_buddy
i2c_algo_bit
drm_display_helper
cec
rc_core
drm_ttm_helper
ttm
drm_kms_helper
ahci
r8169
xhci_pci
libahci
libata
xhci_hcd
aesni_intel
realtek
drm
mxm_wmi
crypto_simd
mdio_devres
scsi_mod
cryptd
usbcore
libphy
i2c_i801
i2c_smbus
usb_common
scsi_common
fan
video
wmi
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:591f] (rev 05)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1043:8694]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 6th-10th Gen Core Processor PCIe Controller (x16) [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 121
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: f7e00000-f7efffff [size=1M] [32-bit]
Prefetchable memory behind bridge: e0000000-f01fffff [size=258M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [1043:8694]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 127
IOMMU group: 2
Region 0: Memory at f7f10000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31)
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family MEI Controller [1043:8694]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 139
IOMMU group: 3
Region 0: Memory at f7f2d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
IOMMU group: 4
Region 0: Memory at f7f28000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f7f2c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f7f2b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family PCI Express Root Port [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
IOMMU group: 5
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family PCI Express Root Port [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 123
IOMMU group: 6
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f7d00000-f7dfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 [8086:a112] (rev f1) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family PCI Express Root Port [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 124
IOMMU group: 7
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 [8086:a113] (rev f1) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family PCI Express Root Port [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 125
IOMMU group: 8
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: f7c00000-f7cfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family PCI Express Root Port [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 126
IOMMU group: 9
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 2000-2fff [size=4K] [16-bit]
Memory behind bridge: c8000000-c81fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: c8200000-c83fffff [size=2M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controller [8086:a145] (rev 31)
Subsystem: ASUSTeK Computer Inc. Z170 Chipset LPC/eSPI Controller [1043:8694]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 10
00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31)
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family Power Management Controller [1043:8694]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
IOMMU group: 10
Region 0: Memory at f7f24000 (32-bit, non-prefetchable) [disabled] [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller [8086:a170] (rev 31)
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family HD Audio Controller [1043:86c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 140
IOMMU group: 10
Region 0: Memory at f7f20000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f7f00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31)
Subsystem: ASUSTeK Computer Inc. 100 Series/C230 Series Chipset Family SMBus [1043:8694]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 10
Region 0: Memory at f7f2a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] [1002:67df] (rev c7) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Radeon RX 480 [1043:04fb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 138
IOMMU group: 1
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at f7e00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
Subsystem: ASUSTeK Computer Inc. Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] [1043:aaf0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 141
IOMMU group: 1
Region 0: Memory at f7e60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1142 USB 3.1 Host Controller [1b21:1242] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. ASM1142 USB 3.1 Host Controller [1043:8675]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 11
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 04) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. ASM1083/1085 PCIe to PCI Bridge [1043:8489]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
IOMMU group: 12
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: [disabled] [32-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: ASUSTeK Computer Inc. PRIME B450M-A Motherboard [1043:8677]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 13
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7c04000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 003 Device 002: ID 0a12:1243 Cambridge Silicon Radio, Ltd Audioengine 2+
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0416:b23c Winbond Electronics Corp. Gaming Keyboard
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.0
APT prefers stable-security
APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.1.0-9-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-9-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-9-amd64 recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-9-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.06-13
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-9-amd64 is related to:
ii firmware-amd-graphics 20230210-5
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20230210-5
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20230210-5
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: