Your message dated Thu, 21 Sep 2023 12:44:25 +0200 with message-id <2701994.mvXUDI8C0e@bagend> and subject line Re: Bug#1050117: Confirm fixed in 6.1.0-12 (6.1.52-1) has caused the Debian Bug report #1050117, regarding poweroff (shutdown -h) / reboot (shutdown -r) does not work properly since 6.1.27-1 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 1050117: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050117 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: /usr/share/bug/linux-image-6.4.0-0.deb12.2-686-pae-unsigned/include-1cmdline: poweroff (shutdown -h) / reboot (shutdown -r) does not work properly.
- From: Takashi Yano <takashi.yano@nifty.ne.jp>
- Date: Sun, 20 Aug 2023 16:08:30 +0900
- Message-id: <20230820160830.679e4624db299562342af018@nifty.ne.jp>
Package: src:linux Version: 6.4.4-3~bpo12+1 Severity: normal File: /usr/share/bug/linux-image-6.4.0-0.deb12.2-686-pae-unsigned/include-1cmdline X-Debbugs-Cc: takashi.yano@nifty.ne.jp I installed bookworm into my OLD PC and found this problem. Shutdown and reboot does not work properly. It stops after displaying: [ xxxx.xxxxxx] system-shutdown[1]: Powering off. or [ xxxx.xxxxxx] system-shutdown[1]: Rebooting. I also noticed that the another PC of similar generation works even with linux-image-6.1.0-11-686-pae (DELL PowerEdge 1500SC). Full screen image is like: [ 290.821465] EXT4-fs (sda4): unmounting filesystem. [ 291.185022] systemd-shutdown[1]: Syncing filesystems and block devices. [ 291.358289] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 291.368445] systemd-journald[211]: Received SIGTERM from PID i (systemdeshutdow). [ 291.406307] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 291.415836] systemd-shutdown[1]: Unmounting file systems. [ 291.420449] (sd-remount)[505]: Remounting'/' read-only with options 'errors:remount-ro'. [ 291.431524] EXT4-fs (sda12): re-mounted. Quota mode: none. [ 291.439996] systemd-shutdown[1]: All filesystems unmounted. [ 291.440097] systemd-shutdown[1]: Deactivating swaps. [ 291.440423] systemd-shutdown[1]: All swaps deactivated. [ 291.440477] systemd-shutdown[1]: Detaching loop devices. [ 291.444822] systemd-shutdown[1]: All loop devices detached. [ 291.444919] systemdeshutdown[1]: Stopping MD devices. [ 291.445354] systemd-shutdown[1]: All MD devices stopped. [ 291.445406] systemd-shutdown[1]: Detaching DM devices. [ 291.445753] systemd-shutdown[1]: All DM devices detached. [ 291.445801] systemdeshutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. [ 291.459662] systemd-shutdown[1]: Syncing filesystems and block devices. [ 291.461906] systemdeshutdown[1]: Powering off. First, this happens with linux-image-6.1.0-11-686-pae. I tried various kernel versions and the results are as follows. linux-image-5.19.0-0.deb11.2-686-pae 5.19.11-1~bpo11+1 : OK linux-image-6.0.0-0.deb11.2-686-pae 6.0.3-1~bpo11+1 : OK linux-image-6.1.0-0.deb11.5-686-pae 6.1.12-1~bpo11+1 : OK linux-image-6.1.0-0.deb11.7-686-pae 6.1.20-2~bpo11+1 : OK linux-image-6.1.0-10-686-pae 6.1.38-2 : NG linux-image-6.1.0-11-686-pae 6.1.38-4 : NG linux-image-6.4.0-0.deb12.2-686-pae-unsigned 6.4.4-3~bpo12+1 : NG linux-image-6.4.0-2-686-pae 6.4.4-3 : NG linux-image-6.5.0-0-686-pae-unsigned 6.5~rc6-1~exp1 : NG OK: Works without the problem. NG: Has the problem. It seems that kernels built for bullseye do not have this issue. Or maybe the kernel before 6.1.0-0 works. Please let me know if further information is necessary. -- Package-specific info: ** Version: Linux version 6.4.0-0.deb12.2-686-pae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.4.4-3~bpo12+1 (2023-08-08) ** Command line: BOOT_IMAGE=/vmlinuz-6.4.0-0.deb12.2-686-pae root=UUID=fc774740-5be6-44f6-b87c-b6d8305d3680 ro quiet ** Tainted: DE (8320) * kernel died recently, i.e. there was an OOPS or BUG * unsigned module was loaded ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information Mother board: MSI MS6163 VER:1 (440BX chipset) CPU: Intel(R) Celeron(TM) CPU 1400MHz Graphics: Nvidia FX 5900XT ** Loaded modules: binfmt_misc(E) sil164(E) nouveau(E) ppdev(E) snd_ymfpci(E+) saa7134(E) tveeprom(E) snd_ac97_codec(E) videobuf2_dma_sg(E) videobuf2_memops(E) ac97_bus(E) videobuf2_v4l2(E) snd_mpu401_uart(E) snd_opl3_lib(E) snd_hwdep(E) gameport(E) snd_rawmidi(E) snd_seq_device(E) videodev(E) mxm_wmi(E) snd_pcm(E) snd_timer(E) videobuf2_common(E) drm_display_helper(E) pcspkr(E) snd(E) mc(E) cec(E) soundcore(E) rc_core(E) drm_ttm_helper(E) ttm(E) drm_kms_helper(E) i2c_algo_bit(E) parport_pc(E) video(E) parport(E) wmi(E) joydev(E) button(E) evdev(E) serio_raw(E) sg(E) loop(E) fuse(E) drm(E) efi_pstore(E) dm_mod(E) dax(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) hid_logitech_hidpp(E) hid_logitech_dj(E) sd_mod(E) t10_pi(E) hid_generic(E) usbhid(E) hid(E) crc64_rocksoft(E) crc64(E) crc_t10dif(E) crct10dif_generic(E) sr_mod(E) crct10dif_common(E) cdrom(E) ata_generic(E) ata_piix(E) ohci_pci(E) uhci_hcd(E) ehci_pci(E) ohci_hcd(E) ehci_hcd(E) libata(E) psmouse(E) usbcore(E) scsi_mod(E) e1000(E) i2c_piix4(E) scsi_common(E) usb_common(E) floppy(E) fan(E) ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2 Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: d000-dfff [size=4K] [16-bit] Memory behind bridge: ec000000-edffffff [size=32M] [32-bit] Prefetchable memory behind bridge: e0000000-e7ffffff [size=128M] [32-bit] Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at f000 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:07.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Kernel modules: i2c_piix4 00:0e.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-744B [DS-1S Audio Controller] [1073:0010] (rev 02) Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC [1073:0010] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at ef040000 (32-bit, non-prefetchable) [size=32K] Region 1: I/O ports at e400 [size=64] Region 2: I/O ports at e800 [size=4] Capabilities: [50] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel modules: snd_ymfpci 00:10.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:002e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at ef020000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at ec00 [size=64] Expansion ROM at ee000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 Kernel modules: e1000 00:12.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Philips Semiconductors SAA7130-based TV tuner card [1131:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ef048000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 00:14.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 41) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Controller [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at ef049000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:14.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 41) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Controller [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at ef04a000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci Kernel modules: ohci_pci 00:14.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 02) (prog-if 20 [EHCI]) Subsystem: HaSoTec GmbH uPD72010x USB 2.0 Controller [0e55:2928] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at ef04b000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci-pci Kernel modules: ehci_pci 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV35 [GeForce FX 5900XT] [10de:0332] (rev a1) (prog-if 00 [VGA controller]) Subsystem: LeadTek Research Inc. NV35 [GeForce FX 5900XT] [107d:2975] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2 Kernel driver in use: nouveau Kernel modules: nouveau ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 12.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 6.4.0-0.deb12.2-686-pae (SMP w/1 CPU thread; PREEMPT) Kernel taint flags: TAINT_DIE, TAINT_UNSIGNED_MODULE Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned depends on: ii initramfs-tools [linux-initramfs-tool] 0.142 ii kmod 30+20221128-1 ii linux-base 4.9 Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned recommends: ii apparmor 3.0.8-3 ii firmware-linux-free 20200122-1 Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned suggests: pn debian-kernel-handbook <none> ii grub-pc 2.06-13 pn linux-doc-6.4 <none> Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20230210-5 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information -- Takashi Yano <takashi.yano@nifty.ne.jp>
--- End Message ---
--- Begin Message ---
- To: Takashi Yano <takashi.yano@nifty.ne.jp>, 1050117-done@bugs.debian.org
- Subject: Re: Bug#1050117: Confirm fixed in 6.1.0-12 (6.1.52-1)
- From: Diederik de Haas <didi.debian@cknow.org>
- Date: Thu, 21 Sep 2023 12:44:25 +0200
- Message-id: <2701994.mvXUDI8C0e@bagend>
- In-reply-to: <[🔎] 20230921193237.468952bcd8d7db114a7cd35d@nifty.ne.jp>
- References: <20230820160830.679e4624db299562342af018@nifty.ne.jp> <[🔎] 20230921193237.468952bcd8d7db114a7cd35d@nifty.ne.jp>
Version: linux/6.1.52-1 On Thursday, 21 September 2023 12:32:37 CEST Takashi Yano wrote: > I confirmed that the issue no longer pappens in: > linux-image-6.1.0-12-686-pae 6.1.52-1 Thanks for reporting back! Closing bug with that version thenAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---