|
Hi, Everyone:
First of all, I'd like to thank Brian Mays help me to solve my pcmcia_cs problem last time. Now I got a new trouble, that wish some one can give me advices again. This is my stiuration: Toshiba Satellite 2520CDT, with Yamaha OPL3 SAx sound chips which is compatiable with Microsoft Sound System or Creative Sound Blaster(The user menual said so...). And here is my Debian: Debian 2.1 whith 2.2.10 kernel, I put the last part of "make menuconfig"/"sound" for 2.2.10 kernel in the end of this mail. What I have done is: After complied my new kernel, I modified the conf.modules with the value that came from Windows, I put it at the edn of conf.modules file, here is the file(part of): cat /etc/conf.modules: # Sound alias char-major-14 opl3sa2 pre-install opl3sa2 modprobe "-k" "ad1848" post-install opl3sa2 modprobe "-k" "opl3" options opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 irq=5 dma=0 dma2=1x After all, I still can't hear any audio output,include the CDROM , I found there are not any audio device in /dev, then I decided to make it by issue the "./MAKEDEV audio" at /dev directory, after the device file been created, I type "lsmod" and here is the result (part of): lsmod: Module Size Used by mpu401 17628 0 (autoclean) (unused) sound 54428 0 (autoclean) [mpu401] soundcore 2100 3 (autoclean) [sound] Here is something about /dev/sndstat(nothing except OSS/Free....): cat /dev/sndstat: OSS/Free:3.8s2++-971130 Load type: Driver loaded as a module Kernel: Linux hope 2.2.10 #1 Fri Oct 15 07:34:25 CST 1999 i586 Config options: 0 Installed drivers: Card config: Audio devices: Synth devices: Midi devices: Timers: 0: System clock I've try to execute the mixer but faile as the following result: asmixer: asmixer:unable to grab /dev/mixer xmix: Error opening mixer device: Operation not supported by device Here is the message shown in xconsole when I execute xmix: Oct 28 01:27:10 hope modprobe: can't locate module sound-slot-0 Oct 28 01:27:10 hope modprobe: can't locate module sound-service-0-0 Sometime xconsole will show: Oct 28 12:26:04 hope modprobe: can't locate module synth0 Where there is the items I choice to complie it as modules(I do this via make menuconfig): <M> Sound card support < > Ensoniq AudioPCI (ES1370) < > Creative Ensoniq AudioPCI 97 (ES1371) < > S3 SonicVibes < > Support for Turtle Beach MultiSound Classic, Tahiti, Monterey < > Support for Turtle Beach MultiSound Pinnacle, Fiji <M> OSS sound modules < > ProAudioSpectrum 16 support <M> 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support <M> Generic OPL2/OPL3 FM synthesizer support < > Gravis Ultrasound support <M> MPU-401 support (NOT for SB16) < > PSS (AD1848, ADSP-2115, ESC614) support <M> Microsoft Sound System support < > Ensoniq SoundScape support < > MediaTrix AudioTrix Pro support < > Support for OPTi MAD16 and/or Mozart based cards < > Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards < > Support for Crystal CS4232 based (PnP) cards <M> Support for Yamaha OPL3-SA2, SA3, and SAx based PnP cards < > Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers < > Support for Aztech Sound Galaxy (non-PnP) cards < > Yamaha OPL3-SA1 audio controller < > SoftOSS software wave table engine <M> FM synthesizer (YM3812/OPL-3) support < > Loopback MIDI device support < > 6850 UART support Additional low level sound drivers ---> [ ] Additional low level sound drivers < > ACI mixer (miroPCM12) (NEW) < > AWE32 synth (NEW) < > Gallant Audio Cards (SC-6000 and SC-6600 based) (NEW) Hoping someone can give hints to sole the problem, and if someone who have the same type of sound chips or notebook, and welling to show me step by step, I'd like to thank you in advance! Cheers, ============ Nazareth Shu Oct. 28 1999 Taiwan, R.O.C. |