On Tue, 28 Oct 2003 16:30:31 -0700 Jeremy Nickurak <atrus@debian.spam.rifetech.com> wrote: > I've been trying to get kernel 2.4.22 running properly on my Toshiba Satellite 2060CDS, with little success. > > The system boots, and pcmcia-cs starts successfully, but insertion of my network card (3com 3c574_cs) causes a freeze, with only the message "". > > This does not occur under woody's stock 2.2.20 kernel. > > I'm new to laptops and PCMCIA, and don't really know how to go about probing this problem. > > I would appreciate any suggestions on what could be the problem, things i might try to correct it, or laptop-newbie oriented readings that might help me understand this better. > > /proc/pci: > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Toshiba America Info Systems CPU to PCI and PCI to ISA bridge (rev 1). > Bus 0, device 7, function 0: > Communication controller: Lucent Microelectronics 56k WinModem (rev 1). > IRQ 3. > Master Capable. No bursts. Min Gnt=252.Max Lat=14. > Non-prefetchable 32 bit memory at 0xffefff00 [0xffefffff]. > I/O at 0x2f8 [0x2ff]. > I/O at 0x1c00 [0x1cff]. > Bus 0, device 8, function 0: > VGA compatible controller: S3 Inc. ViRGE/MX (rev 6). > Master Capable. No bursts. Min Gnt=4.Max Lat=255. > Non-prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. > Bus 0, device 11, function 0: > USB Controller: NEC Corporation USB (rev 2). > IRQ 11. > Master Capable. Latency=64. Min Gnt=1.Max Lat=21. > Non-prefetchable 32 bit memory at 0xf7fff000 [0xf7ffffff]. > Bus 0, device 12, function 0: > Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 16). > IRQ 11. > Master Capable. Latency=64. Min Gnt=2.Max Lat=24. > I/O at 0xff00 [0xffff]. > Bus 0, device 16, function 0: > IDE interface: PCI device 1179:0102 (Toshiba America Info Systems) (rev 52). > Master Capable. Latency=64. Min Gnt=2.Max Lat=40. > I/O at 0x1800 [0x180f]. > Bus 0, device 19, function 0: > CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 7). > IRQ 11. > Master Capable. No bursts. Min Gnt=128.Max Lat=5. > Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff]. > Bus 0, device 19, function 1: > CardBus bridge: Toshiba America Info Systems ToPIC95 (#2) (rev 7). > IRQ 11. > Master Capable. No bursts. Min Gnt=128.Max Lat=5. > Non-prefetchable 32 bit memory at 0x10001000 [0x10001fff]. > > > /proc/ioports (because I've heard it referred to as a source of relevant information in similar problems via google): > > 0000-001f : dma1 > 0020-003f : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0070-007f : rtc > 0080-008f : dma page reg > 00a0-00bf : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 02f8-02ff : Lucent Microelectronics 56k WinModem > 0376-0376 : ide1 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 0cf8-0cff : PCI conf1 > 1800-180f : PCI device 1179:0102 (Toshiba America Info Systems) > 1c00-1cff : Lucent Microelectronics 56k WinModem > 4000-40ff : PCI CardBus #14 > 4400-44ff : PCI CardBus #14 > 4800-48ff : PCI CardBus #15 > 4c00-4cff : PCI CardBus #15 > ff00-ffff : ESS Technology ES1978 Maestro 2E > Hi: I own the very same machine (2060cds) and I had a very similar problem when I first tried to install woody on it. My solution was to get and compile the separate pcmcia-cs (outside the kernel) and that made it. Hope it helps hugo ------ Gpg key: http://lcd.efn.uncor.edu/pubkeys/hsc_key.pgp
Attachment:
pgpM5h_Oxs8ud.pgp
Description: PGP signature