Re: Sandisk SDDR55 mounting ro
Have you checked to see if the write protect switch is in the correct
position? Little thing,
but easily overlooked!
Matt
----- Original Message -----
From: "Jeff" <jcoppock1@comcast.net>
To: "debian laptop list" <debian-laptop@lists.debian.org>
Sent: Sunday, November 09, 2003 4:16 PM
Subject: Sandisk SDDR55 mounting ro
> I have a Sandisk Imagemate that loads as SDDR55. However, I can't get
> it to mount read-write.
>
> Syslog shows...
> Nov 9 13:21:56 jcdeb2 kernel: Attached scsi removable disk sda at
> scsi0, channel 0, id 0, lun 0
> Nov 9 13:21:56 jcdeb2 kernel: sddr55: map inconsistency at LBA 0002
> Nov 9 13:21:56 jcdeb2 kernel: SCSI device sda: 128000 512-byte hdwr
> sectors (66 MB)
> Nov 9 13:21:56 jcdeb2 kernel: sda: Write Protect is on
> Nov 9 13:21:56 jcdeb2 kernel: sda: sda1
>
> My /etc/fstab entry is...
>
> /dev/sda1 /home/jeff/sandisk vfat rw,noauto,user,exec 0
> 0
>
> Permissions on the device and mount point are...
>
> brw-rw-rw- 1 root disk 8, 1 2002-03-14 13:51 /dev/sda1
>
> Prior to mount...
> drwxr-xr-x 2 jeff jeff 4096 2003-11-09 13:34 sandisk
>
> And, when I mount it...
> $ mount sandisk/
> mount: block device /dev/sda1 is write-protected, mounting read-only
>
> And the permissions after mounting...
> drwxr--r-- 3 jeff jeff 16384 1969-12-31 16:00 sandisk
>
> I can't figure out how to mount it read-write. Any ideas out there?
>
> jc
>
>
> --
> Jeff Coppock Systems Engineer
> Diggin' Debian Admin and User
>
>
> --
> To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>
Reply to: