Re: PCMCIA (was: Re: BenH TiBook kernels @ debian.jones.dk)
hi
shouldn't pcmcia-cs tell you these settings need to be fixed during its
install or figure the ranges itself? has anyone considered filing a bug
report?
could the lspci output be parsed by the install script?
hmm. maybe my config, although working, isn't optimal. using a bronze g3
and the ranges came from the pcmcia-cs faq.
$ lspci -v
...
00:13.0 CardBus bridge: Texas Instruments PCI1211
Flags: bus master, medium devsel, latency 168, IRQ 22
Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
Memory window 0: fd000000-fd3ff000 (prefetchable)
Memory window 1: 80000000-803ff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
$ cat /etc/pcmcia/config.opts
...
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0x80000000-0x80ffffff
...
> the resource ranges available to PCMCIA in /etc/pcmcia/config.opts:
>
> # PowerPC ioports and memory:
> include port 0x1000-0x10ff, port 0x1400-0x14ff
> include memory 0x80400000-0x807ff000, memory 0xf3000000-0xf33ff000
>
> Remove the default ranges. Above is for my TiBook.
>
> For other machines, get these ranges out of a lspci listing.
--
bcmidgle@sanluis.uccs.edu
Brad Midgley
Reply to: