Re: XFBdev resolution platinum 7200/90
Quoting Michel Lanners <mlan@cpu.lu>:
> Can you show us your /var/log/XFree86.0.log?
Yes i can:
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.18-powerpc-smp ppc [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 7 14:40:33 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macintosh"
(**) XKB: model: "macintosh"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7 (WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0001 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 106b,0002 card 0000,0000 rev 02 class ff,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 00x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 00x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 00x00000000 - 0xffffffff (0x0) MX[B]
(II) Addressable bus resource ranges are
[0] -1 00x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 00x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 00xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 00x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 00x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 00x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 00xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 00xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 00xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 00x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 00x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 00x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 00xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 00x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 00xf3000000 - 0xf3ffffff (0x1000000) MX[B]E
[3] -1 00x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 00x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) FBDev: driver for framebuffer: fbdev, afb
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.4
(II) FBDev(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDev(0): Depth 8, (--) framebuffer bpp 8
(==) FBDev(0): Default visual is PseudoColor
(==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDev(0): Hardware: platinum (vidmem: 1024k)
(II) FBDev(0): Checking Modes against framebuffer device...
(II) FBDev(0): mode "800x600" ok
(II) FBDev(0): Checking Modes against monitor...
(--) FBDev(0): Virtual size is 640x480 (pitch 640)
(**) FBDev(0): Built-in mode "current": 30.0 MHz, 34.7 kHz, 66.1 Hz
(II) FBDev(0): Modeline "current" 30.00 640 720 784 864 480 483 486 525 -hsync -vsync -csync
(++) FBDev(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(**) FBDev(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(==) FBDev(0): Backing store disabled
(**) Option "dpms"
(**) FBDev(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Configured Mouse: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Generic Mouse: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
and i will show you my kernel messages too...
device tree used 27260 bytes
Total memory = 40MB; using 256kB for hash table (at c02c0000)
Linux version 2.2.20-pmac (root@voltaire) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Thu Mar 21 17:08:23 EST 2002
PCI bus 0 controlled by bandit at f2000000
Cache coherency enabled for bandit/PSX at f2000000
pmac nvram is core99: 0
System has 32 possible interrupts
GMT Delta read from XPRAM: -240 minutes, DST: on
Console: colour dummy device 80x25
Calibrating delay loop... 89.49 BogoMIPS
Memory: 37528k available (1716k kernel code, 1532k data, 184k init) [c0000000,c2800000]
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
adb devices: [2]: 2 2 [3]: 3 1
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5
MacOS display is /platinum
Total VRAM = 1MB 0001
Monitor sense value = 0x62b, using video mode 6 and color mode 1.
Console: switching to colour frame buffer device 80x30
fb0: platinum frame buffer device
input0: Macintosh mouse button emulation
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ANSI.
input1: ADB HID on ID 2:2.02
ADB mouse at 3, handler set to 2
input2: ADB HID on ID 3:3.01
PowerMac Z8530 serial driver version 2.0
tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem
tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer
pty: 256 Unix98 ptys configured
Macintosh non-volatile memory driver v1.0
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
fd0: SWIM3 floppy controller
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi0 : 53C94
scsi : 1 host.
Vendor: QUANTUM Model: FIREBALL540S Rev: 1Q09
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: QUANTUM Model: FIREBALL1280S Rev: 630C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: MATSHITA Model: CD-ROM CR-8005A Rev: 4.0i
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
scsi : detected 3 SCSI generics 1 SCSI cdrom 2 SCSI disks total.
Uniform CD-ROM driver Revision: 3.11
SCSI device sda: hdwr sector= 512 bytes. Sectors= 1065235 [520 MB] [0.5 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2503872 [1222 MB] [1.2 GB]
eth0: MACE at 00:05:02:a0:42:74, chip revision 9.64
3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
Partition check:
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
event0: Event device for input2
event1: Event device for input1
event2: Event device for input0
usb.c: registered new driver hid
keybdev.c: Adding keyboard: input1
mouse0: PS/2 mouse device for input2
mouse1: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
usb.c: registered new driver wacom
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k init 28k prep
Adding Swap: 158616k swap-space (priority -1)
DMA sound driver installed, using 4 buffers of 32k.
I`ve tried "video=platinum:vmode:10,cmode:0"(800x600-60Mhz 8 colors) with no change at all
i can see in /proc/cmdline the argument but the framebuffer doesn`t react at all. X still use the 640x480-66Mhz default.
> > Can i use a pc ati mach64 in a powermac? I gess not, because of
> the pci bus speed diff. (33/45Mhz) and the bios of the card...
>
> PCI buses on Macs _always_ run at 33 MHz (or 666 MHz.. but that was
> oneor two generations later :-) . Your 45 MHz is the CPU bus.
>
> Making a Mach64 work in a 7200 can be done. Shouldn't be too hard....
>
What does it mean? Can i plug the card directly or should i do something else first like flashing the bios? I`m new to the powermac hardware...
Thanks a million... Charles :^)
Reply to: