вот инструкция по компиляции. Делал всё по ней.
вот инструкция по компиляции. Делал всё по ней.
ReadMe file for the
Intel(R) 536ep V9x DF modem Linux driver
contents:
1. License
2. Release Notes
3. Installation/Uninstallation
4. File Descriptions
5. International Users
6. Beta Tester appreciation
7. Security issues
8. Compilation issues
a. Instructions for Debian Users
b. Kernel Source
9. What is the Hamregistry?
10. what's v92 and v44?
11. The Hamregistry tool (for persistance)
12. Known Bugs/Issues
13. Comments, ideas, problems, fixes
-------------------------------------------------------------------------------
1. LICENSE
IMPORTANT - read the file "LICENSE.txt" for the INTEL SOFTWARE LICENSE
AGREEMENT BEFORE COPYING, INSTALLING OR USING.
-------------------------------------------------------------------------------
2. Release Notes
This release is not compatible with kernels prior to 2.4.
This release supports 2.4.x and 2.6.x kernels. It is not
compatible to 2.2.x kernels.
The softmodem binary was compiled with gcc version 3.2
v92 support added: modem on hold AT command set,
PCM upstream, v44, and quick connect are implemented.
Linux Compatability tests are performed on the latest or
previous
versions of the following distributions: Mandrake, RedHat, and
SuSE
-------------------------------------------------------------------------------
3. INSTALLATION
Prerequisites:
1. root access
2. bash shell to run install scripts
3. an Intel536ep modem
4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING.
(found on your distribution's CD)
6 steps to install
1. login as ROOT
2. extract the archive into a directory with "tar -zxvf
<archivename>.tgz"
3. cd into the directory it created.
4. Type: make clean
5. Type: make 536
6. Type: make install
This will create a /dev/modem device file. This file is used as an
interface to
modem by all applications: minicom, kpppd, efax, etc. Please configure
the applications
to use /dev/modem if neccessary.
The installation script has been designed for the following
distributions
release versions
mandrake-release
SuSE-release
redhat-release
debian_version (including Corel)
slackware-version
conectiva-version
bluepoint-release
redflag-release
Unknown distributions install modules and utilities but
will not install boot scripts!.
Please examine the Intel536_inst and Intel536_boot scripts if you have a
different distribution.
The driver registers itself as character device
major number 240, minor number 1.
ATTENTION: if the driver compiles but the script just wont work for
you.
Here are the bare minimum steps to get your modem to work.
0. log in as root.
1. insmod -f Intel536.o (Intel536.ko for kernel 2.6)
2. you can start "hamregistry &" at this point if you wish.
3. rm /dev/536ep
4. mknod /dev/536ep c 240 1 (note "240" is the default, if it does
not
work see what /proc/devices says 536ep's major number is)
5. ln -s /dev/536ep /dev/modem
6. start a comm application like minicom and use the modem.
7. see section 3 (International Users) for info on setting the
correct
country settings.
Uninstallation.
Linux modem driver is started by the boot script Intel536_boot. The
script location
is distribution specific, usually /etc/init.d. So to uninstall the
modem, delete
this file, and stop the modules using command: rmmod Intel537
make uninstall does this for redhat.
-------------------------------------------------------------------------------
4. FILE DESCRIPTIONS
Intel536_inst installation script to install 536 modules and supporting
files
files copied to /lib/modules/(kernel-version)/misc
Intel536.o (Intel536.ko) modem driver
files copied to /etc/rc.d/... (path differes per distribution)
Intel536_ boot scrip to start and stop driver module
files copied to /usr/sbin
hamregistry hamregistry is the "registry" like tool that the modem
uses to
get and store persistant data such as county info and profile
strings.
files copied to /etc
hamregistry.bin file that stores the initial persistant data for
modem.
-------------------------------------------------------------------------------
5. INTERNATIONAL USERS
hamregistry will store the last country setting you
set in the modem.
in minicom (or equivalent comm application)
the commmand to change country setting is "AT+GCI="
the command takes a t.35 country code in hexadecimal.
below is a list of currently supported t.35 country codes.
you can also put this "AT" command in the init string of
the comm application you are using.
if you are a CTR-21 country I think you should be able to
choose a CTR-21 country on the list and be ok. but
that's no guarantee.
The same goes for countries that are "USA" compatable.
(this table also exist in the source file wwh_dflt.c that
ships with the Intel536ep driver)
country code t.35 code
---------------------------
USA 1 B5
KOR 82 61
ECU 593 35
BOL 591 14
CHL 56 15
COL 57 27
PAN 507 85
PER 51 88
SAU 966 98
THA 66 A9
VNM 84 BC
SWE 46 A5
DNK 45 31
FIN 358 3C
NOR 47 82
ISL 354 52
IRL 353 57
ISR 972 58
LIE 423 68
ESP 34 A0
TUR 90 AE
DEU 49 42
AUT 43 0A
CHE 41 A6
CYP 357 2D
GRC 30 46
ITA 39 59
LUX 352 69
NLD 31 7B
GBR 44 B4
BEL 32 0F
FRA 33 3D
PRT 351 8B
PAK 92 84
JPN 81 00
RUS 7 B8
AUS 61 09
MYS 60 6C
CHN 86 26
HKG 852 50
SGP 65 9C
NZL 64 7E
ARG 54 07
BRA 55 16
MEX 52 73
TWN 886 E3
IND 91 53
PHL 63 89
IDN 62 54
BHS 103 0B
BRB 104 0E
BMU 105 12
GTM 502 49
HTI 509 4E
HND 504 4F
JAM 1 5B
NIC 505 7F
PRY 595 87
PRI 121 8C
SUR 597 A3
TTO 117 AC
URY 598 B7
VEN 58 BB
ZWE 263 C4
GUY 592 4D
EST 372 E0
HUN 36 51
SVN 386 E2
ARE 971 B3
SVK 421 2E
CAN 107 14
CRI 506 1B
DOM 110 33
SLV 503 37
GMB 220 41
GIB 350 45
POL 48 8A
EGY 20 36
CZE 420 2E
ZAF 27 9F
GUF 594 E1
-------------------------------------------------------------------------------
6. Thanks to the following beta testers for their valuable input and
suggestions during the HaM 333 beta test between January 2 - 26,
2001
and those who submitted bug reports for Intel 536 driver
Dorian S. Araneda
Sean Walbran
Rob Clark
Marvin Stodolsky
Dominique Duval
Roman Krais
Ulrich Guenther
Marcelino Viana Pinheiro
Thomas S. Iversen
Jospeh Teichman
Michel Bartolone (MED)
Ramon Gonzalez Montoiro
Ryoji Kawagishi
Torsten Vogel
"jandro"
Ian Carr-de Avelon
Helga Weindl
Ed Casas
Bernhard Hoelcker
Alexander "Sasha" Voytov
Albert Woo
Andrey Vitsenko
Peter Hirschmann
Tom Lane
and all of the helpful Linux HaM and 536 modem users
around the world and at www.linmodems.org
-------------------------------------------------------------------------------
7. Security issues
the Intel536_inst and Intel536_boot file install the files and device
nodes as
root for the owner and group.
this will cause problems for those who want to user the modem to
dialout
using an account other than root.
In SuSE, "dialout" is the group used to install the files and device
node.
This way, anyone belonging to the "dialout" group can use the modem to
dialout.
(take a look at /etc/group)
I did not want the script to allow full access of the modem to everyone
without
"root" knowing.
Edit the Intel536_boot and Intel536_inst scripts to fit your needs.
-------------------------------------------------------------------------------
8. Compile issues
a. this driver will now compile with the this path:
/lib/modules/<kernel version>/build/include
the 2.4.4+ kernels says to copy the /boot/vmlinuz.version.h
over to the kernel build path. I have the makefile do this
if this file exists. You must install the kernel source
code anyways. It should be on your distribution's CD.
-------------------------------------------------------------------------------
9. What is the Hamregistry?
The hamregistery is an application that stores data for the 536ep
driver onto
the disk. hamregistry stores information from the driver that needs
to
persist from reboot to reboot such as you current country setting.
The Intel536_inst install script and the Intel536_boot script
start this utility
automatically for you.
If this tool is not present when the driver gets used your profile,
quickconnect, and current country setting will not be saved but the
driver
should still work fine. The only step that would need to be done is
to
make sure that the driver is set to the correct country with
at+gci= (see section 5)
-------------------------------------------------------------------------------
10. What's v92 and v44?
a. modem on hold: (ISP and your ISP dialer must also support this)
This will allow you to pause your ppp connection to answer an
incoming
call. You will need call waiting, dialer, and ISP support for this
to
work. When you are done with the call you can resume your ppp
connection
without having to reconnect. The AT command set for this feature
exist
in the driver.
b, pcm upstream:
(ISP must also support this, as of version 4.32 I
dont know any ISP's that do)
This will allow faster upload speeds.
to enable: at+pig=0
to disable: at+pig=1
c. quickconnect:
Once you make a call to a v92 modem, your phoneline
characteristics are
stored. Whenever you make a new v92 connection it will use this
data
to make the call negotiation quicker (approx 10 seconds).
to enable: at+pqc=0 at+pss=0
to disable: at+pss=2
d. v44: (ISP must also support this)
A better compression protocol than v42 which can give you better
transfer
speeds.
-------------------------------------------------------------------------------
11. The Hamregistry tool
The hamregistry tool is used to provide persistance of settings
across
reboots. The haminst and hamboot scripts automatically setup and
start
the hamregistry background task for the modem to use.
The hamregistry tool has command line arguments for those who wish
to
customize persistant settings. To use these command lines
you must first stop the driver with "bash hamboot stop".
Once the driver has been stopped you may run hamregistry with one of
these
arguments to store into the /etc/hamregistry.bin persistance file:
(supply value for items in < >)
-mfg <Modem manufactures name>
-mod <Modem model name>
-hookflash <0,1,2>
hookflash method: 0=(default)without tone 1=with tone
2=reserved
-v92rptopt <0,1>
control v92 reporting: 0=PCM upsteam only 1=(default)
all v92
-gpio_lpohd <0,1>
Handset Hook detection: 0=not supported
1=(default)supported
-current_country <t.35 code>
This info is written to the /etc/hamregistry.bin file.
If hamregistry.bin exists along with the installation files, haminst
will
copy it to /etc/hamregistry.bin when installing the modem.
-------------------------------------------------------------------------------
12. Known Bugs/Issues
a. Be aware that the build replaces your
/lib/module/<kernver>//build/include/linux/version.h file with
/boot/vmlinuz.version.h
(this is what Linus T. told me to do with a compiler error)
b. There may be an incompatibility with DevFS. The 536ep device may
be located
in /dev/tts/536ep
instead of /dev/536ep. Be aware of this and link /dev/modem to
the 536ep
device that corresponds to your setup.
c. Currently there is a problem with driver and SuSE 7.2 ppp
connections. I have been able to get ppp connection with
bellsouth
by calling this bash script and wvdial config section:
------my script----------------------
#! /bin/sh
/usr/sbin/pppd -detach lock asyncmap 00000000 \
defaultroute debug /dev/modem 115200 \
ipparam ppp0 linkname ppp0 \
noauth \
connect "/usr/bin/wvdial --chat bellsouth"
------my /etc/wvdial.conf section ---
[Dialer bellsouth]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Inti2 = ATQ0 V1 E1 S0=0 &C1 &D2
Dial Command = ATDT
Phone = 9777888
Username = myloginname
Password = mysecretpassword
#Ask Password = 1
Stupid Mode = 0
------------------
wvdial.conf can be created automatically:
wvdialconf wvtest.txt
Found a modem on /dev/537, using link /dev/modem in config.
Modem configuration written to wvtest.txt.
--------
Edit wvtest.txt as indicated. If your country is not the Unites
States,
the Init lines should be
Init1 = ATZ
Init2 = AT+GCI=< your hexadecimnmal country code >
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Then:
cp wvtest.txt /etc/wvdial.conf, which will later direct the
dialout.
First check COMM status with:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:D0:59:36:60:A2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)
The loopback "lo" is standard. But any extra COMM mode such as eth0
should be shut down if it will interfere with domain name services
(DNS)
ifconfig eth0 down
will suffice more most systems. Check with:
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:212 errors:0 dropped:0 overruns:0 frame:0
TX packets:212 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11316 (11.0 KiB) TX bytes:11316 (11.0 KiB)
Then dialout with
wvdial &
# wvdial
--> WvDial: Internet dialer version 1.54
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT9777888
--> Waiting for carrier.
ATDT9777888
CONNECT 53333 V44
--> Carrier detected. Waiting for prompt.
** dialup12.rol.ru Terminal Server **
Login:
--> Looks like a login prompt.
--> Sending: internet
internet
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP Session.
IP address is 66.44.1.90
MTU is 1006.
--> Looks like a welcome message.
--> Starting pppd at Sun Apr 4 23:11:49 2004
--> pid of pppd: 4879
--> Using interface ppp0
ROM checksum self-test: passed (0xdbd8681d).
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
pppd 2.4.2 started by root, uid 0
Using interface ppp0
Connect: ppp0 <--> /dev/ttyLT0
kernel does not support PPP filtering
--> local IP address 68.14.26.80
--> remote IP address 207.116.5.132
--> primary DNS address 207.116.4.8
--> secondary DNS address 207.116.4.9
PPP BSD Compression module registered
PPP Deflate Compression module registered
local IP address 68.14.26.80
remote IP address 207.116.5.132
primary DNS address 207.116.4.8
The DNS address gets copied to /etc/resolv.conf
wherefrom it consulted to find NAME SERVERS which translate Named
addresses into
the Numerical addresses used by the Internet system. Display with
cat /etc/resolv.conf
search
nameserver 207.116.4.8
nameserver 207.116.4.9
Test navigation capability with a known Internet address.
For example the numeric address of novell.com is 130.57.4.70
# ping 130.57.4.70
PING 130.57.4.70 (130.57.4.70): 56 data bytes
64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=208.0 ms
64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=209.9 ms
64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 ms
shows that your System is attached to the internet, while using the
named address
ping novell.com
PING novell.com (130.57.4.70): 56 data bytes
64 bytes from 130.57.4.70: icmp_seq=0 ttl=50 time=204.4 ms
64 bytes from 130.57.4.70: icmp_seq=1 ttl=50 time=210.0 ms
64 bytes from 130.57.4.70: icmp_seq=2 ttl=50 time=210.0 ms
64 bytes from 130.57.4.70: icmp_seq=3 ttl=50 time=210.0 ms
shows that DNS services are OK. ALWAYS quickly abort a "ping" test with
Ctrl -C
This COMM session was started with
wvdial &
where the "&" puts wvdial in the background and allows command prompt
recovery
To stop this session I will fore ground (fg)
fg wvdial and then stop wvdial with
Ctrl-C
-------------------------------------------------------------------------------
13. Comments, ideas, problems, fixes? please contact:
Linux Voice Band Modems (VBM) of Intel Residential Access Division
(RAD)
vbm.linux@intel.com
http://developer.intel.com/design/modems/
To restrict email volume, please email only development related issues
that are
needed to fix a bug or improve the driver. General questions on how to
use the
Linux OS may not be responed to.
Other resources and information on Linux controllerless modems can be
found on
these useful sites
http://www.linmodems.org
and
http://linmodems.technion.ac.il
If you have problems please read Jacques' PostInstall.html FIRST at
http://linmodems.technion.ac.il/
before sending a message to DISCUSS@LINMODES.ORG
Reply to: