Re: How can i boot *anything* on Sun Blade 100?
The jumpers are fine and i believe the cables are too. Here is the result of "probe-ide":
http://oscomp.hu/depot/probe-ide.jpg
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> írta:
>On 04/10/2017 09:44 AM, Hartwig Atrops wrote:
>> Just out of my head, my Blade 100's are not ready-to-start at the moment: the
>> DVD drive is on the 2nd IDE connector, try 'boot cdrom2'
>
>Booting with "boot cdrom" works fine on my Sun Blade 100. I assume that "TCH"
>didn't connect his CD-ROM properly or did not properly set the Master and
>Slave jumpers. It may also be possible that the IDE cables are broken.
>
>Basically, he has to perform some hardware troubleshooting to make sure
>the CD-ROM is properly connected and configured. There is nothing that
>needs to be configured in software to get this working, as far as I know.
>
>Adrian
>
>--
> .''`. John Paul Adrian Glaubitz
>: :' : Debian Developer - glaubitz@debian.org
>`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
>
>
Reply to: