Re: boot-floppies 2.2.25 with i386 2.2.19 upgrade
Tekrams U3 card is supported by the 2.2.19 kernel.
I use it with no problems.
To boot with it you need it compiled in.
Regards,
/Karl
-----------------------------------------------------------------------
Karl Hammar Aspö Data karl@kalle.csb.ki.se
Lilla Aspö 2340 +46 173 140 57 Networks
S-742 94 Östhammar +46 10 270 26 67 Computers
Sweden Consulting
-----------------------------------------------------------------------
From: Bob Nielsen <nielsen@oz.net>
Subject: Re: boot-floppies 2.2.25 with i386 2.2.19 upgrade
Date: Mon, 14 May 2001 19:38:03 -0700
> On Mon, May 14, 2001 at 09:45:45PM -0400, sharkey@ale.physics.sunysb.edu wrote:
> > > LSI Logic Symbios pci scsi bios.
> > >
> > > I think that is what you are looking for.
> >
> > Not really, no. I wanted a chip number.
> >
> > www.tekram.com, flip, flip, flip.....
> >
> > It's a Symbos 53C1010, which appears to be more or less compatible with the
> > 53C8xx chips used in the earlier tekram cards. At least, there're references
> > to them in the 2.4 series kernels' 53c8xx driver sources, so I assume they
> > work, but there's no mention of them in my copy of the 2.2.13 sources I have
> > here, so you may require a 2.4 kernel to use this card. You should check
> > the 2.2.19 sources.
>
> 2.2.19 (also .18) contains a newer sym53c8xx.c driver, which states
> that it supports the 53C1010 and 53C1010_66 chips.
>
> Bob
Reply to: