Bug#781742: upgrade-reports: armel wheezy->jessie on QNAP: flash-kernel error in dist-upgrade and various glitches but mostly successful
On Sat, Apr 04, 2015 at 10:52:35 +0100, Ian Campbell wrote:
> On Thu, 2015-04-02 at 13:04 +0200, reportbug wrote:
> > ** error: apt-get dist-upgrade broke during a flash-kernel
> >
> > This happened on the two QNAP TS-419P+ devices but not on the QNAP
> > TS-219P II Turbo device. The "apt-get dist-upgrade" stage aborted in
> > a flash-kernel trigger that failed, because it seemed to try to flash
> > the jessie 3.16 kernel before it was properly unpacked. Unfortunately
> > I don't have the error message
>
> Did you upgrade with "apt-get update ; apt-get upgrade ; apt-get
> dist-upgrade" as recommended by the installation guide or did you follow
> a different path?
>
> I tried an update+upgrade+dist-upgrade from a freshly installed Wheezy
> system and I didn't see this.
Yep, "update", then "upgrade" (no problems there), then "dist-upgrade" which
failed, then "apt-get -f install" to keep going, then another "dist-upgrade"
to wrap it up.
I found I had logged the output of "dpkg -l" on one of the failing
machines just before the update started, attaching that to this mail.
I also just now discovered a /var/log/apt/term.log that contains the entire
upgrade process recorded! It does seem to contain the entire terminal
output, including the interactive diffs and manual root shell sessions ("Z")
shown during file conflicts (which contain local and perhaps confidential
information) so I don't feel like attaching the whole log, but here is
everything from "Log started" to "Log ended" for the particular dist-upgrade
run that failed, plus everything from "Log started" to "Log ended" for
"apt-get -f install" just after that. Not shown are the first upgrade and
the final dist-ugprade.
The last lines of the attached log for "dist-upgrade" are:
Preparing to unpack .../module-init-tools_18-3_all.deb ...
Unpacking module-init-tools (18-3) over (9-3) ...
Selecting previously unselected package linux-image-3.16.0-4-kirkwood.
Preparing to unpack .../linux-image-3.16.0-4-kirkwood_3.16.7-ckt7-1_armel.deb ...
Unpacking linux-image-3.16.0-4-kirkwood (3.16.7-ckt7-1) ...
Processing triggers for initramfs-tools (0.119) ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Can't find /boot/vmlinuz-3.16.0-4-kirkwood or /boot/initrd.img-3.16.0-4-kirkwood
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing package initramfs-tools (--unpack):
subprocess installed post-installation script returned error exit status 1
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Errors were encountered while processing:
initramfs-tools
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-=====================================-=============================-============-==============================================================================
ii ack-grep 1.96-2 all grep-like program specifically for large source trees
ii adduser 3.113+nmu3 all add and remove users and groups
ii apache2-mpm-prefork 2.2.22-13+deb7u4 armel Apache HTTP Server - traditional non-threaded model
ii apache2-utils 2.2.22-13+deb7u4 armel utility programs for webservers
ii apache2.2-bin 2.2.22-13+deb7u4 armel Apache HTTP Server common binary files
ii apache2.2-common 2.2.22-13+deb7u4 armel Apache HTTP Server common files
ii apcupsd 3.14.10-2 armel APC UPS Power Management (daemon)
ii apcupsd-cgi 3.14.10-2 armel APC UPS Power Management (web interface)
ii apt 0.9.7.9+deb7u7 armel commandline package manager
ii apt-listchanges 2.85.11 all package change history notification tool
ii apt-utils 0.9.7.9+deb7u7 armel package managment related utility programs
ii aptitude 0.6.8.2-1 armel terminal-based package manager
ii aptitude-common 0.6.8.2-1 all architecture indepedent files for the aptitude package manager
ii arpwatch 2.1a15-1.2 armel Ethernet/FDDI station activity monitor
ii at 3.1.13-2+deb7u1 armel Delayed job execution and batch processing
ii atftpd 0.7.dfsg-11 armel advanced TFTP server
ii attr 1:2.4.46-8 armel Utilities for manipulating filesystem extended attributes
ii autotools-dev 20120608.1 all Update infrastructure for config.{guess,sub} files
ii avahi-daemon 0.6.31-2 armel Avahi mDNS/DNS-SD daemon
ii avahi-utils 0.6.31-2 armel Avahi browsing, publishing and discovery utilities
ii axel 2.4-1 armel light download accelerator - console version
ii base-files 7.1wheezy8 armel Debian base system miscellaneous files
ii base-passwd 3.5.26 armel Debian base system master password and group files
ii bash 4.2+dfsg-0.1+deb7u3 armel GNU Bourne Again SHell
ii bash-completion 1:2.0-1 all programmable completion for the bash shell
ii bc 1.06.95-2 armel The GNU bc arbitrary precision calculator language
ii bind9 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Internet Domain Name Server
ii bind9-host 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Version of 'host' bundled with BIND 9.X
ii bind9utils 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Utilities for BIND
ii binutils 2.22-8+deb7u2 armel GNU assembler, linker and binary utilities
ii bsd-mailx 8.1.2-0.20111106cvs-1+deb7u1 armel simple mail user agent
ii bsdmainutils 9.0.3 armel collection of more utilities from FreeBSD
ii bsdutils 1:2.20.1-5.3 armel Basic utilities from 4.4BSD-Lite
ii build-essential 11.5 armel Informational list of build-essential packages
ii busybox 1:1.20.0-7 armel Tiny utilities for small and embedded systems
ii bzip2 1.0.6-4 armel high-quality block-sorting file compressor - utilities
ii ca-certificates 20130119+deb7u1 all Common CA certificates
ii cdbs 0.4.115+deb7u1 all common build system for Debian packages
ii cfv 1.18.3-2 all versatile file checksum creator and verifier
ii comerr-dev 2.1-1.42.5-1.1+deb7u1 armel common error description library - headers and static libraries
ii coreutils 8.13-3.5 armel GNU core utilities
ii cpio 2.11+dfsg-0.1+deb7u1 armel GNU cpio -- a program to manage archives of files
ii cpp 4:4.6.3-8 armel GNU C preprocessor (cpp)
ii cpp-4.4 4.4.7-2 armel GNU C preprocessor
ii cpp-4.6 4.6.3-14 armel GNU C preprocessor
ii cron 3.0pl1-124 armel process scheduling daemon
ii curl 7.26.0-1+wheezy12 armel command line tool for transferring data with URL syntax
ii d-shlibs 0.52 all Debian shared library package building helper scripts
ii dash 0.5.7-3 armel POSIX-compliant shell
ii dbus 1.6.8-1+deb7u6 armel simple interprocess messaging system (daemon and utilities)
ii dc 1.06.95-2 armel The GNU dc arbitrary precision reverse-polish calculator
ii dctrl-tools 2.22.2 armel Command-line tools to process Debian package information
ii deb-multimedia-keyring 2014.2 all GnuPG archive key of the deb-multimedia repository
ii debconf 1.5.49 all Debian configuration management system
ii debconf-i18n 1.5.49 all full internationalization support for debconf
ii debhelper 9.20120909 all helper programs for debian/rules
ii debian-archive-keyring 2014.3~deb7u1 all GnuPG archive keys of the Debian archive
ii debian-faq 5.0.1 all Debian FAQ
ii debian-goodies 0.61 all Small toolbox-style utilities for Debian systems
ii debianutils 4.3.2 armel Miscellaneous utilities specific to Debian
ii devio 1.2-1+b1 armel correctly read (or write) a region of a block device
ii devscripts 2.12.6+deb7u2 armel scripts to make the life of a Debian Package maintainer easier
ii dh-buildinfo 0.9+nmu1 all Debhelper addon to track package versions used to build a package
ii diffutils 1:3.2-6 armel File comparison utilities
ii discover 2.1.2-5.2 armel hardware identification system
ii discover-data 2.2010.10.18 all Data lists for Discover hardware detection system
ii dmsetup 2:1.02.74-8 armel Linux Kernel Device Mapper userspace library
ii dnsutils 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Clients provided with BIND
ii doc-debian 6.1 all Debian Project documentation and other documents
ii doc-linux-text 2008.08-1 all Linux HOWTOs and FAQs in ASCII format
ii dpkg 1.16.15 armel Debian package management system
ii dpkg-dev 1.16.15 all Debian package development tools
ii e2fslibs:armel 1.42.5-1.1+deb7u1 armel ext2/ext3/ext4 file system libraries
ii e2fsprogs 1.42.5-1.1+deb7u1 armel ext2/ext3/ext4 file system utilities
ii eject 2.1.5+deb1+cvs20081104-13 armel ejects CDs and operates CD-Changers under Linux
ii elinks 0.12~pre5-9 armel advanced text-mode WWW browser
ii elinks-data 0.12~pre5-9 all advanced text-mode WWW browser - data files
ii encfs 1.7.4-2.4+b1 armel encrypted virtual filesystem
ii fakeroot 1.18.4-2 armel tool for simulating superuser privileges
ii file 5.11-2+deb7u8 armel Determines file type using "magic" numbers
ii findutils 4.4.2-4 armel utilities for finding files--find, xargs
ii flash-kernel 3.3+deb7u2 armel utility to make certain embedded devices bootable
ii fontconfig-config 2.9.0-7.1 all generic font configuration library - configuration
ii ftp 0.17-27 armel classical file transfer client
ii fuse 2.9.0-2+deb7u1 armel Filesystem in Userspace
ii g++ 4:4.6.3-8 armel GNU C++ compiler
ii g++-4.6 4.6.3-14 armel GNU C++ compiler
ii gcc 4:4.6.3-8 armel GNU C compiler
ii gcc-4.4 4.4.7-2 armel GNU C compiler
ii gcc-4.4-base:armel 4.4.7-2 armel GCC, the GNU Compiler Collection (base package)
ii gcc-4.6 4.6.3-14 armel GNU C compiler
ii gcc-4.6-base:armel 4.6.3-14 armel GCC, the GNU Compiler Collection (base package)
ii gcc-4.7-base:armel 4.7.2-5 armel GCC, the GNU Compiler Collection (base package)
ii geoip-database 20130213-1 all IP lookup command line tools that use the GeoIP library (country database)
ii gettext 0.18.1.1-9 armel GNU Internationalization utilities
ii gettext-base 0.18.1.1-9 armel GNU Internationalization utilities for the base system
ii ghostscript 9.05~dfsg-6.3+deb7u1 armel interpreter for the PostScript language and for PDF
ii git 1:1.7.10.4-1+wheezy1 armel fast, scalable, distributed revision control system
ii git-man 1:1.7.10.4-1+wheezy1 all fast, scalable, distributed revision control system (manual pages)
ii gnupg 1.4.12-7+deb7u7 armel GNU privacy guard - a free PGP replacement
ii gpgv 1.4.12-7+deb7u7 armel GNU privacy guard - signature verification tool
ii grep 2.12-2 armel GNU grep, egrep and fgrep
ii groff-base 1.21-9 armel GNU troff text-formatting system (base system components)
ii gsfonts 1:8.11+urwcyr1.0.7~pre44-4.2 all Fonts for the Ghostscript interpreter(s)
ii gzip 1.5-1.1 armel GNU compression utilities
ii hardening-includes 2.2 all Makefile for enabling compiler flags for security hardening
ii hdparm 9.39-1+b1 armel tune hard disk parameters for high performance
ii hicolor-icon-theme 0.12-1 all default fallback theme for FreeDesktop.org icon themes
ii host 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 all Transitional package
ii hostname 3.11 armel utility to set/show the host name or domain name
ii html2text 1.3.2a-15 armel advanced HTML to text converter
ii id3 0.15-3 armel An ID3 Tag Editor
ii id3v2 0.1.12-2 armel A command line id3v2 tag editor
ii idle3-tools 0.9.1-1 armel change the idle3 timer of recent Western Digital Hard Disk Drives
ii iftop 1.0~pre2-4~deb7u2 armel displays bandwidth usage information on an network interface
ii ifupdown 0.7.8 armel high level tools to configure network interfaces
ii imagemagick 8:6.7.7.10-5+deb7u3 armel image manipulation programs
ii imagemagick-common 8:6.7.7.10-5+deb7u3 all image manipulation programs -- infrastructure
ii inetutils-inetd 2:1.9-2 armel internet super server
ii info 4.13a.dfsg.1-10 armel Standalone GNU Info documentation browser
ii initramfs-tools 0.109.1 all generic modular initramfs generator
ii initscripts 2.88dsf-41+deb7u1 armel scripts for initializing and shutting down the system
ii insserv 1.14.0-5 armel boot sequence organizer using LSB init.d script dependency information
ii install-info 4.13a.dfsg.1-10 armel Manage installed documentation in info format
ii installation-report 2.49 all system installation report
ii intltool-debian 0.35.0+20060710.1 all Help i18n of RFC822 compliant config files
ii iotop 0.4.4-4 armel simple top-like I/O monitor
ii iproute 20120521-3+b3 armel networking and traffic control tools
ii iptables 1.4.14-3.1 armel administration tools for packet filtering and NAT
ii iputils-ping 3:20101006-1+b1 armel Tools to test the reachability of network hosts
ii irssi 0.8.15-5 armel terminal based IRC client
ii isc-dhcp-client 4.2.2.dfsg.1-5+deb70u6 armel ISC DHCP client
ii isc-dhcp-common 4.2.2.dfsg.1-5+deb70u6 armel common files used by all the isc-dhcp* packages
ii isc-dhcp-server 4.2.2.dfsg.1-5+deb70u6 armel ISC DHCP server for automatic IP address assignment
ii iso-codes 3.41-1 all ISO language, territory, currency, script codes and their translations
ii klibc-utils 2.0.1-3.1 armel small utilities built with klibc for early boot
ii kmod 9-3 armel tools for managing Linux kernel modules
ii krb5-multidev 1.10.1+dfsg-5+deb7u3 armel Development files for MIT Kerberos without Heimdal conflict
ii lame 1:3.99.5-dmo2+wheezy2 armel Open source MP3 encoder.
ii less 444-4 armel pager program similar to more
ii lftp 4.3.6-1+deb7u2 armel Sophisticated command-line FTP/HTTP client programs
ii libacl1:armel 2.2.51-8 armel Access control list shared library
ii libacl1-dev 2.2.51-8 armel Access control list static libraries and headers
ii libalgorithm-diff-perl 1.19.02-2 all module to find differences between files
ii libalgorithm-diff-xs-perl 0.04-2+b1 armel module to find differences between files (XS accelerated)
ii libalgorithm-merge-perl 0.08-2 all Perl module for three-way merge of textual data
ii libapache2-mod-php5 5.4.39-0+deb7u2 armel server-side, HTML-embedded scripting language (Apache 2 module)
ii libapr1 1.4.6-3+deb7u1 armel Apache Portable Runtime Library
ii libaprutil1 1.4.1-3 armel Apache Portable Runtime Utility Library
ii libaprutil1-dbd-sqlite3 1.4.1-3 armel Apache Portable Runtime Utility Library - SQLite3 Driver
ii libaprutil1-ldap 1.4.1-3 armel Apache Portable Runtime Utility Library - LDAP Driver
ii libapt-inst1.5:armel 0.9.7.9+deb7u7 armel deb package format runtime library
ii libapt-pkg4.12:armel 0.9.7.9+deb7u7 armel package managment runtime library
ii libasprintf0c2:armel 0.18.1.1-9 armel GNU library to use fprintf and friends in C++
ii libattr1:armel 1:2.4.46-8 armel Extended attribute shared library
ii libattr1-dev:armel 1:2.4.46-8 armel Extended attribute static libraries and headers
ii libavahi-client-dev 0.6.31-2 armel Development files for the Avahi client library
ii libavahi-client3:armel 0.6.31-2 armel Avahi client library
ii libavahi-common-data:armel 0.6.31-2 armel Avahi common data files
ii libavahi-common-dev 0.6.31-2 armel Development files for the Avahi common library
ii libavahi-common3:armel 0.6.31-2 armel Avahi common library
ii libavahi-core7:armel 0.6.31-2 armel Avahi's embeddable mDNS/DNS-SD library
ii libbind9-60 1:9.7.3.dfsg-1~squeeze10 armel BIND9 Shared Library used by BIND
ii libbind9-80 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel BIND9 Shared Library used by BIND
ii libblas3 1.2.20110419-5 armel Basic Linear Algebra Reference implementations, shared library
ii libblas3gf 1.2.20110419-5 all Transitional package for libblas
ii libblkid1:armel 2.20.1-5.3 armel block device id library
ii libboost-filesystem1.49.0 1.49.0-3.2 armel filesystem operations (portable paths, iteration over directories, etc) in C++
ii libboost-iostreams1.42.0 1.42.0-4 armel Boost.Iostreams Library
ii libboost-iostreams1.49.0 1.49.0-3.2 armel Boost.Iostreams Library
ii libboost-serialization1.49.0 1.49.0-3.2 armel serialization library for C++
ii libboost-system1.49.0 1.49.0-3.2 armel Operating system (e.g. diagnostics support) library
ii libbsd0:armel 0.4.2-1 armel utility functions from BSD systems - shared library
ii libbz2-1.0:armel 1.0.6-4 armel high-quality block-sorting file compressor library - runtime
ii libc-ares2:armel 1.9.1-3 armel library for asynchronous name resolves
ii libc-bin 2.13-38+deb7u8 armel Embedded GNU C Library: Binaries
ii libc-dev-bin 2.13-38+deb7u8 armel Embedded GNU C Library: Development binaries
ii libc6:armel 2.13-38+deb7u8 armel Embedded GNU C Library: Shared libraries
ii libc6-dev:armel 2.13-38+deb7u8 armel Embedded GNU C Library: Development Libraries and Header Files
ii libcap-ng0 0.6.6-2 armel An alternate POSIX capabilities library
ii libcap2:armel 1:2.22-1.2 armel support for getting/setting POSIX.1e capabilities
ii libcap2-bin 1:2.22-1.2 armel basic utility programs for using capabilities
ii libclass-isa-perl 0.36-3 all report the search path for a class's ISA tree
ii libcomerr2:armel 1.42.5-1.1+deb7u1 armel common error description library
ii libcrack2 2.8.19-3 armel pro-active password checker library
ii libcrack2-dev 2.8.19-3 armel pro-active password checker library - development files
ii libcroco3:armel 0.6.6-2 armel Cascading Style Sheet (CSS) parsing and manipulation toolkit
ii libcups2:armel 1.5.3-5+deb7u5 armel Common UNIX Printing System(tm) - Core library
ii libcups2-dev 1.5.3-5+deb7u5 armel Common UNIX Printing System(tm) - Development files CUPS library
ii libcupsimage2:armel 1.5.3-5+deb7u5 armel Common UNIX Printing System(tm) - Raster image library
ii libcurl3:armel 7.26.0-1+wheezy12 armel easy-to-use client-side URL transfer library (OpenSSL flavour)
ii libcurl3-gnutls:armel 7.26.0-1+wheezy12 armel easy-to-use client-side URL transfer library (GnuTLS flavour)
ii libcwidget3 0.5.16-3.4 armel high-level terminal interface library for C++ (runtime files)
ii libdaemon0 0.14-2 armel lightweight C library for daemons - runtime library
ii libdate-manip-perl 6.32-1 all module for manipulating dates
ii libdb4.6 4.6.21-16 armel Berkeley v4.6 Database Libraries [runtime]
ii libdb4.7 4.7.25-9 armel Berkeley v4.7 Database Libraries [runtime]
ii libdb4.8 4.8.30-2 armel Berkeley v4.8 Database Libraries [runtime]
ii libdb4.8-dev 4.8.30-2 armel Berkeley v4.8 Database Libraries [development]
ii libdb5.1:armel 5.1.29-5 armel Berkeley v5.1 Database Libraries [runtime]
ii libdbus-1-3:armel 1.6.8-1+deb7u6 armel simple interprocess messaging system (library)
ii libdbus-1-dev 1.6.8-1+deb7u6 armel simple interprocess messaging system (development headers)
ii libdevmapper1.02.1:armel 2:1.02.74-8 armel Linux Kernel Device Mapper userspace library
ii libdiscover2 2.1.2-5.2 armel hardware identification library
ii libdns69 1:9.7.3.dfsg-1~squeeze10 armel DNS Shared Library used by BIND
ii libdns88 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel DNS Shared Library used by BIND
ii libdpkg-perl 1.16.15 all Dpkg perl modules
ii libedit2:armel 2.11-20080614-5 armel BSD editline and history libraries
ii libelfg0 0.8.13-3 armel an ELF object file access library
ii libept1.4.12 1.0.9 armel High-level library for managing Debian package information
ii liberror-perl 0.17-1 all Perl module for error/exception handling in an OO-ish way
ii libevent-1.4-2 1.4.13-stable-1 armel An asynchronous event notification library
ii libevent-2.0-5:armel 2.0.19-stable-3+deb7u1 armel Asynchronous event notification library
ii libexpat1:armel 2.1.0-1+deb7u1 armel XML parsing C library - runtime library
ii libffi5:armel 3.0.10-3 armel Foreign Function Interface library runtime
ii libfile-copy-recursive-perl 0.38-1 all Perl extension for recursively copying files and directories
ii libfile-next-perl 1.10-1 all file-finding iterator
ii libflac8:armel 1.2.1-6+deb7u1 armel Free Lossless Audio Codec - runtime C library
ii libfontconfig1:armel 2.9.0-7.1 armel generic font configuration library - runtime
ii libfreetype6:armel 2.4.9-1.1+deb7u1 armel FreeType 2 font engine, shared library files
ii libfsplib0 0.11-2 armel FSP v2 protocol stack library - shared library
ii libfuse2:armel 2.9.0-2+deb7u1 armel Filesystem in Userspace (library)
ii libgc1c2 1:7.1-9.1 armel conservative garbage collector for C and C++
ii libgcc1:armel 1:4.7.2-5 armel GCC support library
ii libgcrypt11:armel 1.5.0-5+deb7u3 armel LGPL Crypto library - runtime library
ii libgcrypt11-dev 1.5.0-5+deb7u3 armel LGPL Crypto library - development files
ii libgd2-xpm:armel 2.0.36~rc1~dfsg-6.1 armel GD Graphics Library version 2
ii libgdbm3:armel 1.8.3-11 armel GNU dbm database routines (runtime version)
ii libgeoip1 1.4.8+dfsg-3 armel non-DNS IP-to-country resolver library
ii libgettextpo0:armel 0.18.1.1-9 armel GNU Internationalization library
ii libgfortran3:armel 4.7.2-5 armel Runtime library for GNU Fortran applications
ii libglib2.0-0:armel 2.33.12+really2.32.4-5 armel GLib library of C routines
ii libglib2.0-data 2.33.12+really2.32.4-5 all Common files for GLib library
ii libgmp10:armel 2:5.0.5+dfsg-2 armel Multiprecision arithmetic library
ii libgnutls-dev 2.12.20-8+deb7u3 armel GNU TLS library - development files
ii libgnutls-openssl27:armel 2.12.20-8+deb7u3 armel GNU TLS library - OpenSSL wrapper
ii libgnutls26:armel 2.12.20-8+deb7u3 armel GNU TLS library - runtime library
ii libgnutlsxx27:armel 2.12.20-8+deb7u3 armel GNU TLS library - C++ runtime library
ii libgomp1:armel 4.7.2-5 armel GCC OpenMP (GOMP) support library
ii libgpg-error-dev 1.10-3.1 armel library for common error values and messages in GnuPG components (development)
ii libgpg-error0:armel 1.10-3.1 armel library for common error values and messages in GnuPG components
ii libgpgme11 1.2.0-1.4+deb7u1 armel GPGME - GnuPG Made Easy
ii libgpm2:armel 1.20.4-6 armel General Purpose Mouse - shared library
ii libgs9 9.05~dfsg-6.3+deb7u1 armel interpreter for the PostScript language and for PDF - Library
ii libgs9-common 9.05~dfsg-6.3+deb7u1 all interpreter for the PostScript language and for PDF - common files
ii libgssapi-krb5-2:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
ii libgssglue1:armel 0.4-2 armel mechanism-switch gssapi library
ii libgssrpc4:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - GSS enabled ONCRPC
ii libice6:armel 2:1.0.8-2 armel X11 Inter-Client Exchange library
ii libid3-3.8.3c2a 3.8.3-15 armel library for manipulating ID3v1 and ID3v2 tags
ii libidn11:armel 1.25-2 armel GNU Libidn library, implementation of IETF IDN specifications
ii libijs-0.35 0.35-8 armel IJS raster image transport protocol: shared library
ii libisc62 1:9.7.3.dfsg-1~squeeze10 armel ISC Shared Library used by BIND
ii libisc84 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel ISC Shared Library used by BIND
ii libisccc60 1:9.7.3.dfsg-1~squeeze10 armel Command Channel Library used by BIND
ii libisccc80 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Command Channel Library used by BIND
ii libisccfg62 1:9.7.3.dfsg-1~squeeze10 armel Config File Handling Library used by BIND
ii libisccfg82 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Config File Handling Library used by BIND
ii libjasper1:armel 1.900.1-13+deb7u3 armel JasPer JPEG-2000 runtime library
ii libjbig0:armel 2.0-2+deb7u1 armel JBIGkit libraries
ii libjbig2dec0 0.11+20120125-1 armel JBIG2 decoder library - shared libraries
ii libjpeg8:armel 8d-1+deb7u1 armel Independent JPEG Group's JPEG runtime library
ii libjs-jquery 1.7.2+dfsg-1 all JavaScript library for dynamic web applications
ii libjs-sphinxdoc 1.1.3+dfsg-4 all JavaScript support for Sphinx documentation
ii libjs-underscore 1.1.6-1+deb7u1 all JavaScript's functional programming helper library
ii libk5crypto3:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - Crypto Library
ii libkadm5clnt-mit7 1.8.3+dfsg-4squeeze6 armel MIT Kerberos runtime libraries - Administration Clients
ii libkadm5clnt-mit8:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - Administration Clients
ii libkadm5srv-mit7 1.8.3+dfsg-4squeeze6 armel MIT Kerberos runtime libraries - KDC and Admin Server
ii libkadm5srv-mit8:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - KDC and Admin Server
ii libkdb5-4 1.8.3+dfsg-4squeeze6 armel MIT Kerberos runtime libraries - Kerberos database
ii libkdb5-6:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - Kerberos database
ii libkeyutils1:armel 1.5.5-3+deb7u1 armel Linux Key Management Utilities (library)
ii libklibc 2.0.1-3.1 armel minimal libc subset for use with initramfs
ii libkmod2:armel 9-3 armel libkmod shared library
ii libkrb5-3:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries
ii libkrb5-dev 1.10.1+dfsg-5+deb7u3 armel Headers and development libraries for MIT Kerberos
ii libkrb5support0:armel 1.10.1+dfsg-5+deb7u3 armel MIT Kerberos runtime libraries - Support library
ii liblcms2-2:armel 2.2+git20110628-2.2+deb7u1 armel Little CMS 2 color management library
ii libldap-2.4-2:armel 2.4.31-2 armel OpenLDAP libraries
ii liblinear1 1.8+dfsg-1 armel Library for Large Linear Classification
ii liblocale-gettext-perl 1.05-7+b1 armel module using libc functions for internationalization in Perl
ii liblockfile-bin 1.09-5 armel support binaries for and cli utilities based on liblockfile
ii liblockfile1:armel 1.09-5 armel NFS-safe locking library
ii liblqr-1-0:armel 0.4.1-2 armel converts plain array images into multi-size representation
ii libltdl-dev:armel 2.4.2-1.1 armel A system independent dlopen wrapper for GNU libtool
ii libltdl7:armel 2.4.2-1.1 armel A system independent dlopen wrapper for GNU libtool
ii liblua5.1-0:armel 5.1.5-4+deb7u1 armel Shared library for the Lua interpreter version 5.1
ii liblua5.1-0-dev:armel 5.1.5-4+deb7u1 armel Development files for the Lua language version 5.1
ii liblwres60 1:9.7.3.dfsg-1~squeeze10 armel Lightweight Resolver Library used by BIND
ii liblwres80 1:9.8.4.dfsg.P1-6+nmu2+deb7u4 armel Lightweight Resolver Library used by BIND
ii liblzma2 5.0.0-2 armel XZ-format compression library
ii liblzma5:armel 5.1.1alpha+20120614-2 armel XZ-format compression library
ii libmagic1:armel 5.11-2+deb7u8 armel File type determination library using "magic" numbers
ii libmagickcore5:armel 8:6.7.7.10-5+deb7u3 armel low-level image manipulation library
ii libmagickwand5:armel 8:6.7.7.10-5+deb7u3 armel image manipulation library
ii libmms0:armel 0.6.2-3+deb7u1 armel MMS stream protocol library - shared library
ii libmount1 2.20.1-5.3 armel block device id library
ii libmp3lame0:armel 1:3.99.5-dmo2+wheezy2 armel Shared libraries for MP3 encoding.
ii libmpc2:armel 0.9-4 armel multiple precision complex floating-point library
ii libmpfr4:armel 3.1.0-5 armel multiple precision floating-point computation
ii libncurses5:armel 5.9-10 armel shared libraries for terminal handling
ii libncursesw5:armel 5.9-10 armel shared libraries for terminal handling (wide character support)
ii libneon27-gnutls 0.29.6-3 armel HTTP and WebDAV client library (GnuTLS enabled)
ii libnewt0.52 0.52.14-11.1 armel Not Erik's Windowing Toolkit - text mode windowing with slang
ii libnfnetlink0 1.0.0-1.1 armel Netfilter netlink library
ii libnfsidmap2:armel 0.25-4 armel NFS idmapping library
ii libnspr4:armel 2:4.9.2-1+deb7u2 armel NetScape Portable Runtime Library
ii libogg0:armel 1.3.0-4 armel Ogg bitstream library
ii libonig2 5.9.1-1 armel Oniguruma regular expressions library
ii libopts25 1:5.12-0.1 armel automated option processing library based on autogen
ii libp11-kit-dev 0.12-3 armel Library for loading and coordinating access to PKCS#11 modules - development
ii libp11-kit0:armel 0.12-3 armel Library for loading and coordinating access to PKCS#11 modules - runtime
ii libpam-modules:armel 1.1.3-7.1 armel Pluggable Authentication Modules for PAM
ii libpam-modules-bin 1.1.3-7.1 armel Pluggable Authentication Modules for PAM - helper binaries
ii libpam-runtime 1.1.3-7.1 all Runtime support for the PAM library
ii libpam0g:armel 1.1.3-7.1 armel Pluggable Authentication Modules library
ii libpam0g-dev:armel 1.1.3-7.1 armel Development files for PAM
ii libpaper1:armel 1.1.24+nmu2 armel library for handling paper characteristics
ii libparted0debian1:armel 2.3-12 armel disk partition manipulator - shared library
ii libpcap0.8:armel 1.3.0-1 armel system interface for user-level packet capture
ii libpci3:armel 1:3.1.9-6 armel Linux PCI Utilities (shared library)
ii libpcre3:armel 1:8.30-5 armel Perl 5 Compatible Regular Expression Library - runtime files
ii libperl5.14 5.14.2-21+deb7u2 armel shared Perl library
ii libpipeline1:armel 1.2.1-1 armel pipeline manipulation library
ii libpng12-0:armel 1.2.49-1 armel PNG library - runtime
ii libpopt0:armel 1.16-7 armel lib for parsing cmdline parameters
ii libprocps0:armel 1:3.3.3-3 armel library for accessing process information from /proc
ii libpth20 2.0.7-16 armel The GNU Portable Threads
ii libqdbm14 1.8.78-2 armel QDBM Database Libraries without GDBM wrapper[runtime]
ii libreadline-dev:armel 6.2+dfsg-0.1 armel GNU readline and history libraries, development files
ii libreadline6:armel 6.2+dfsg-0.1 armel GNU readline and history libraries, run-time libraries
ii libreadline6-dev:armel 6.2+dfsg-0.1 armel GNU readline and history libraries, development files
ii librlog5 1.4-2 armel flexible message logging library
ii librpcsecgss3:armel 0.19-5 armel allows secure rpc communication using the rpcsec_gss protocol
ii librsync1:armel 0.9.7-9 armel rsync remote-delta algorithm library
ii librtmp0:armel 2.4+20111222.git4e06e21-1 armel toolkit for RTMP streams (shared library)
ii libsasl2-2:armel 2.1.25.dfsg1-6+deb7u1 armel Cyrus SASL - authentication abstraction library
ii libsasl2-modules:armel 2.1.25.dfsg1-6+deb7u1 armel Cyrus SASL - pluggable authentication modules
ii libselinux1:armel 2.1.9-5 armel SELinux runtime shared libraries
ii libsemanage-common 2.1.6-6 all Common files for SELinux policy management libraries
ii libsemanage1:armel 2.1.6-6 armel SELinux policy management library
ii libsensors4:armel 1:3.3.2-2+deb7u1 armel library to read temperature/voltage/fan sensors
ii libsepol1:armel 2.1.4-3 armel SELinux library for manipulating binary security policies
ii libsigc++-2.0-0c2a:armel 2.2.10-0.2 armel type-safe Signal Framework for C++ - runtime
ii libslang2:armel 2.2.4-15 armel S-Lang programming library - runtime version
ii libsm6:armel 2:1.2.1-2 armel X11 Session Management library
ii libsmi2ldbl:armel 0.4.8+dfsg2-7 armel library to access SMI MIB information
ii libsndfile1:armel 1.0.25-5 armel Library for reading/writing audio files
ii libsqlite3-0:armel 3.7.13-1+deb7u1 armel SQLite 3 shared library
ii libss2:armel 1.42.5-1.1+deb7u1 armel command-line interface parsing library
ii libssh2-1:armel 1.4.2-1.1+deb7u1 armel SSH2 client-side library
ii libssl-dev 1.0.1e-2+deb7u16 armel SSL development libraries, header files and documentation
ii libssl0.9.8 0.9.8o-4squeeze14 armel SSL shared libraries
ii libssl1.0.0:armel 1.0.1e-2+deb7u16 armel SSL shared libraries
ii libstdc++6:armel 4.7.2-5 armel GNU Standard C++ Library v3
ii libstdc++6-4.6-dev 4.6.3-14 armel GNU Standard C++ Library v3 (development files)
ii libsvn1:armel 1.6.17dfsg-4+deb7u8 armel Shared libraries used by Subversion
ii libswitch-perl 2.16-2 all switch statement for Perl
ii libsystemd-login0:armel 44-11+deb7u4 armel systemd login utility library
ii libtalloc2:armel 2.0.7+git20120207-1 armel hierarchical pool based memory allocator
ii libtasn1-3:armel 2.13-2+deb7u1 armel Manage ASN.1 structures (runtime)
ii libtasn1-3-dev 2.13-2+deb7u1 armel Manage ASN.1 structures (development)
ii libtdb1:armel 1.2.10-2 armel Trivial Database - shared library
ii libtext-charwidth-perl 0.04-7+b1 armel get display widths of characters on the terminal
ii libtext-iconv-perl 1.7-5 armel converts between character sets in Perl
ii libtext-wrapi18n-perl 0.06-7 all internationalized substitute of Text::Wrap
ii libtiff4:armel 3.9.6-11 armel Tag Image File Format (TIFF) library (old version)
ii libtimedate-perl 1.2000-1 all collection of modules to manipulate date/time information
ii libtinfo-dev:armel 5.9-10 armel developer's library for the low-level terminfo library
ii libtinfo5:armel 5.9-10 armel shared low-level terminfo library for terminal handling
ii libtirpc1:armel 0.2.2-5 armel transport-independent RPC library
ii libtokyocabinet8 1.4.37-6 armel Tokyo Cabinet Database Libraries [runtime]
ii libtokyocabinet9:armel 1.4.47-2 armel Tokyo Cabinet Database Libraries [runtime]
ii libtre5:armel 0.8.0-3 armel regexp matching library with approximate matching
ii libudev0:armel 175-7.2 armel libudev shared library
ii libunistring0:armel 0.9.3-5 armel Unicode string library for C
ii libusb-0.1-4:armel 2:0.1.12-20+nmu1 armel userspace USB programming library
ii libusb-1.0-0:armel 2:1.0.11-1 armel userspace USB programming library
ii libustr-1.0-1:armel 1.0.4-3 armel Micro string library: shared library
ii libuuid-perl 0.02-5 armel Perl extension for using UUID interfaces as defined in e2fsprogs
ii libuuid1:armel 2.20.1-5.3 armel Universally Unique ID library
ii libvorbis0a:armel 1.3.2-1.3 armel The Vorbis General Audio Compression Codec (Decoder library)
ii libvorbisenc2:armel 1.3.2-1.3 armel The Vorbis General Audio Compression Codec (Encoder library)
ii libwbclient0:armel 2:3.6.6-6+deb7u5 armel Samba winbind client library
ii libwireshark-data 1.8.2-5wheezy14 all network packet dissection library -- data files
ii libwireshark2 1.8.2-5wheezy14 armel network packet dissection library -- shared library
ii libwiretap2 1.8.2-5wheezy14 armel network packet capture library -- shared library
ii libwrap0:armel 7.6.q-24 armel Wietse Venema's TCP wrappers library
ii libwrap0-dev:armel 7.6.q-24 armel Wietse Venema's TCP wrappers library, development files
ii libwsutil2 1.8.2-5wheezy14 armel network packet dissection utilities library -- shared library
ii libx11-6:armel 2:1.5.0-1+deb7u1 armel X11 client-side library
ii libx11-data 2:1.5.0-1+deb7u1 all X11 client-side library
ii libxapian22 1.2.12-2 armel Search engine library
ii libxau6:armel 1:1.0.7-1 armel X11 authorisation library
ii libxcb1:armel 1.8.1-2+deb7u1 armel X C Binding
ii libxdmcp6:armel 1:1.1.1-1 armel X11 Display Manager Control Protocol library
ii libxext6:armel 2:1.3.1-2+deb7u1 armel X11 miscellaneous extension library
ii libxml2:armel 2.8.0+dfsg1-7+wheezy3 armel GNOME XML library
ii libxpm4:armel 1:3.5.10-1 armel X11 pixmap library
ii libxt6:armel 1:1.1.3-1+deb7u1 armel X11 toolkit intrinsics library
ii libyaml-syck-perl 1.20-1 armel Perl module providing a fast, lightweight YAML loader and dumper
ii linux-base 3.5 all Linux image base package
ii linux-image-2.6.32-5-kirkwood 2.6.32-48squeeze1 armel Linux 2.6.32 for Marvell Kirkwood
ii linux-image-3.2.0-4-kirkwood 3.2.65-1+deb7u2 armel Linux 3.2 for Marvell Kirkwood
ii linux-image-kirkwood 3.2+46 armel Linux for Marvell Kirkwood (meta-package)
ii linux-libc-dev:armel 3.2.65-1+deb7u2 armel Linux support headers for userspace development
ii locales 2.13-38+deb7u8 all Embedded GNU C Library: National Language (locale) data [support]
ii locales-all 2.13-38+deb7u8 armel Embedded GNU C Library: Precompiled locale data
ii locate 4.4.2-4 armel maintain and query an index of a directory tree
ii login 1:4.1.5.1-1 armel system login tools
ii logrotate 3.8.1-4 armel Log rotation utility
ii logwatch 7.4.0+svn20120502rev103-1 all log analyser with nice output written in Perl
ii lsb-base 4.1+Debian8+deb7u1 all Linux Standard Base 4.1 init script functionality
ii lsb-release 4.1+Debian8+deb7u1 all Linux Standard Base version reporting utility
ii lsof 4.86+dfsg-1 armel Utility to list open files
ii ltrace 0.5.3-2.1 armel Tracks runtime library calls in dynamically linked programs
ii m4 1.4.16-3 armel a macro processing language
ii make 3.81-8.2 armel An utility for Directing compilation.
ii man-db 2.6.2-1 armel on-line manual pager
ii manpages 3.44-1 all Manual pages about using a GNU/Linux system
ii manpages-dev 3.44-1 all Manual pages about using GNU/Linux for development
ii mawk 1.3.3-17 armel a pattern scanning and text processing language
ii mc 3:4.8.3-10 armel Midnight Commander - a powerful file manager
ii mc-data 3:4.8.3-10 all Midnight Commander - a powerful file manager -- data files
ii mdadm 3.2.5-5 armel tool to administer Linux MD arrays (software RAID)
ii mdns-scan 0.5-1 armel Scan for mDNS/DNS-SD services published on the local network
ii mime-support 3.52-1+deb7u1 all MIME files 'mime.types' & 'mailcap', and support programs
ii mimms 3.2.2-1 all mms (e.g. mms://) stream downloader
ii module-init-tools 9-3 all transitional dummy package (module-init-tools to kmod)
ii mount 2.20.1-5.3 armel Tools for mounting and manipulating filesystems
ii mtr-tiny 0.82-3 armel Full screen ncurses traceroute tool
ii multiarch-support 2.13-38+deb7u8 armel Transitional package to ensure multiarch compatibility
ii mutt 1.5.21-6.2+deb7u3 armel text-based mailreader supporting MIME, GPG, PGP and threading
ii nano 2.2.6-1+b1 armel small, friendly text editor inspired by Pico
ii ncurses-base 5.9-10 all basic terminal type definitions
ii ncurses-bin 5.9-10 armel terminal-related programs and man pages
ii ncurses-term 5.9-10 all additional terminal type definitions
ii net-tools 1.60-24.2 armel The NET-3 networking toolkit
ii netbase 5.0 all Basic TCP/IP networking system
ii netcat-openbsd 1.105-7 armel TCP/IP swiss army knife
ii netcat-traditional 1.10-40 armel TCP/IP swiss army knife
ii nfs-common 1:1.2.6-4 armel NFS support files common to client and server
ii nfs-kernel-server 1:1.2.6-4 armel support for NFS kernel server
ii nmap 6.00-0.3+deb7u1 armel The Network Mapper
ii ntfs-3g 1:2012.1.15AR.5-2.1 armel read/write NTFS driver for FUSE
ii ntfsprogs 1:2012.1.15AR.5-2.1 all read/write NTFS driver for FUSE (transitional package)
ii ntp 1:4.2.6.p5+dfsg-2+deb7u3 armel Network Time Protocol daemon and utility programs
ii ntpdate 1:4.2.6.p5+dfsg-2+deb7u3 armel client for setting system time from NTP servers
ii openssh-blacklist 0.4.1+nmu1 all list of default blacklisted OpenSSH RSA and DSA keys
ii openssh-client 1:6.0p1-4+deb7u2 armel secure shell (SSH) client, for secure access to remote machines
ii openssh-server 1:6.0p1-4+deb7u2 armel secure shell (SSH) server, for secure access from remote machines
ii openssl 1.0.1e-2+deb7u16 armel Secure Socket Layer (SSL) binary and related cryptographic tools
ii p7zip-full 9.20.1~dfsg.1-4 armel 7z and 7za file archivers with high compression ratio
ii p7zip-rar 9.20.1~ds.1-3 armel non-free rar module for p7zip
ii par2 0.4-11 armel Parity Archive Volume Set, for checking and repair of files
ii parted 2.3-12 armel disk partition manipulator
ii passwd 1:4.1.5.1-1 armel change and administer password and group data
ii patch 2.6.1-3 armel Apply a diff file to an original
ii pciutils 1:3.1.9-6 armel Linux PCI Utilities
ii perl 5.14.2-21+deb7u2 armel Larry Wall's Practical Extraction and Report Language
ii perl-base 5.14.2-21+deb7u2 armel minimal Perl system
ii perl-modules 5.14.2-21+deb7u2 all Core Perl modules
ii php5-cli 5.4.39-0+deb7u2 armel command-line interpreter for the php5 scripting language
ii php5-common 5.4.39-0+deb7u2 armel Common files for packages built from the php5 source
ii php5-curl 5.4.39-0+deb7u2 armel CURL module for php5
ii php5-gd 5.4.39-0+deb7u2 armel GD module for php5
ii pkg-config 0.26-1 armel manage compile and link flags for libraries
ii po-debconf 1.0.16+nmu2 all tool for managing templates file translations with gettext
ii poppler-data 0.4.5-10 all encoding data for the poppler PDF rendering library
ii postfix 2.9.6-2 armel High-performance mail transport agent
ii procmail 3.22-20+deb7u1 armel Versatile e-mail processor
ii procps 1:3.3.3-3 armel /proc file system utilities
ii psmisc 22.19-1+deb7u1 armel utilities that use the proc file system
ii pv 1.2.0-1 armel Shell pipeline element to meter data passing through
ii python 2.7.3-4+deb7u1 all interactive high-level object-oriented language (default version)
ii python-apt 0.8.8.2 armel Python interface to libapt-pkg
ii python-apt-common 0.8.8.2 all Python interface to libapt-pkg (locales)
ii python-central 0.6.17 all register and build utility for Python packages
ii python-chardet 2.0.1-2 all universal character encoding detector
ii python-debian 0.1.21 all Python modules to work with Debian-related data formats
ii python-debianbts 1.11 all Python interface to Debian's Bug Tracking System
ii python-fpconst 0.7.2-5 all Utilities for handling IEEE 754 floating point special values
ii python-minimal 2.7.3-4+deb7u1 all minimal subset of the Python language (default version)
ii python-pylibacl 0.5.1-1.1 armel module for manipulating POSIX.1e ACLs
ii python-pyxattr 0.5.1-1.1 armel module for manipulating filesystem extended attributes
ii python-reportbug 6.4.4+deb7u1 all Python modules for interacting with bug tracking systems
ii python-soappy 0.12.0-4 all SOAP Support for Python
ii python-support 1.0.15 all automated rebuilding support for Python modules
ii python2.6 2.6.8-1.1 armel Interactive high-level object-oriented language (version 2.6)
ii python2.6-minimal 2.6.8-1.1 armel Minimal subset of the Python language (version 2.6)
ii python2.7 2.7.3-6+deb7u2 armel Interactive high-level object-oriented language (version 2.7)
ii python2.7-minimal 2.7.3-6+deb7u2 armel Minimal subset of the Python language (version 2.7)
ii python3 3.2.3-6 all interactive high-level object-oriented language (default python3 version)
ii python3-minimal 3.2.3-6 all minimal subset of the Python language (default python3 version)
ii python3.2 3.2.3-7 armel Interactive high-level object-oriented language (version 3.2)
ii python3.2-minimal 3.2.3-7 armel Minimal subset of the Python language (version 3.2)
ii qcontrol 0.4.2-7+wheezy2 armel hardware control for QNAP Turbo Station devices
ii rdiff-backup 1.2.8-7 armel remote incremental backup
ii readline-common 6.2+dfsg-0.1 all GNU readline and history libraries, common files
ii reportbug 6.4.4+deb7u1 all reports bugs in the Debian distribution
ii rpcbind 0.2.0-8 armel converts RPC program numbers into universal addresses
ii rsync 3.0.9-4 armel fast, versatile, remote (and local) file-copying tool
ii rsyslog 5.8.11-3+deb7u2 armel reliable system and kernel logging daemon
ii samba 2:3.6.6-6+deb7u5 armel SMB/CIFS file, print, and login server for Unix
ii samba-common 2:3.6.6-6+deb7u5 all common files used by both the Samba server and client
ii screen 4.1.0~20120320gitdb59704-7 armel terminal multiplexer with VT100/ANSI terminal emulation
ii sed 4.2.1-10 armel The GNU sed stream editor
ii sensible-utils 0.0.7 all Utilities for sensible alternative selection
ii sgml-base 1.26+nmu4 all SGML infrastructure and SGML catalog file support
ii shared-mime-info 1.0-1+b1 armel FreeDesktop.org shared MIME database and spec
ii smartmontools 5.41+svn3365-1 armel control and monitor storage systems using S.M.A.R.T.
ii smbclient 2:3.6.6-6+deb7u5 armel command-line SMB/CIFS clients for Unix
ii sshfs 2.4-1 armel filesystem client based on SSH File Transfer Protocol
ii ssl-cert 1.0.32 all simple debconf wrapper for OpenSSL
ii strace 4.5.20-2.3 armel A system call tracer
ii subversion 1.6.17dfsg-4+deb7u8 armel Advanced version control system
ii subversion-tools 1.6.17dfsg-4+deb7u8 all Assorted tools related to Subversion
ii syslinux-common 2:4.05+dfsg-6+deb7u1 all collection of boot loaders (common files)
ii sysstat 10.0.5-1 armel system performance tools for Linux
ii sysv-rc 2.88dsf-41+deb7u1 all System-V-like runlevel change mechanism
ii sysvinit 2.88dsf-41+deb7u1 armel System-V-like init utilities
ii sysvinit-utils 2.88dsf-41+deb7u1 armel System-V-like utilities
ii tar 1.26+dfsg-0.1 armel GNU version of the tar archiving utility
ii tasksel 3.14.1 all Tool for selecting tasks for installation on Debian systems
ii tasksel-data 3.14.1 all Official tasks used for installation of Debian systems
ii tcpd 7.6.q-24 armel Wietse Venema's TCP wrapper utilities
ii telnet 0.17-36 armel The telnet client
ii texinfo 4.13a.dfsg.1-10 armel Documentation system for on-line information and printed output
ii time 1.7-24 armel GNU time program for measuring CPU resource usage
ii traceroute 1:2.0.18-3 armel Traces the route taken by packets over an IPv4/IPv6 network
ii tree 1.6.0-1 armel displays directory tree, in color
ii tshark 1.8.2-5wheezy14 armel network traffic analyzer - console version
ii ttf-dejavu-core 2.33-3 all Vera font family derivate with additional characters
ii tzdata 2015b-0wheezy1 all time zone and daylight-saving time data
ii u-boot-tools 2012.04.01-2 armel companion tools for Das U-Boot bootloader
ii uboot-mkimage 2012.04.01-2 all generate kernel image for U-Boot (transitional package)
ii ucf 3.0025+nmu3 all Update Configuration File: preserve user changes to config files.
ii udev 175-7.2 armel /dev/ and hotplug management daemon
ii unace 1.2b-10+deb7u1 armel extract, test and view .ace archives
ii unadf 0.7.11a-3 armel Extract files from an Amiga Disk File dump (.adf)
ii unrar 1:4.1.4-1 armel Unarchiver for .rar files (non-free version)
ii unzip 6.0-8+deb7u2 armel De-archiver for .zip files
ii update-inetd 4.43 all inetd configuration file updater
ii usbutils 1:005-3 armel Linux USB utilities
ii util-linux 2.20.1-5.3 armel Miscellaneous system utilities
ii vim 2:7.3.547-7 armel Vi IMproved - enhanced vi editor
ii vim-common 2:7.3.547-7 armel Vi IMproved - Common files
ii vim-runtime 2:7.3.547-7 all Vi IMproved - Runtime files
ii vim-tiny 2:7.3.547-7 armel Vi IMproved - enhanced vi editor - compact version
ii w3m 0.5.3-8 armel WWW browsable pager with excellent tables/frames support
ii wamerican 7.1-1 all American English dictionary words for /usr/share/dict
ii wget 1.13.4-3+deb7u2 armel retrieves files from the web
ii whiptail 0.52.14-11.1 armel Displays user-friendly dialog boxes from shell scripts
ii whois 5.1.1~deb7u1 armel intelligent WHOIS client
ii wireshark-common 1.8.2-5wheezy14 armel network traffic analyzer - common files
ii x11-common 1:7.7+3~deb7u1 all X Window System (X.Org) infrastructure
ii xml-core 0.13+nmu2 all XML infrastructure and XML catalog file support
ii xz-utils 5.1.1alpha+20120614-2 armel XZ-format compression utilities
ii zip 3.0-6 armel Archiver for .zip files
ii zlib1g:armel 1:1.2.7.dfsg-13 armel compression library - runtime
ii zlib1g-dev:armel 1:1.2.7.dfsg-13 armel compression library - development
ii zsh 4.3.17-1 armel shell with lots of features
Log started: 2015-04-01 18:00:37
(Reading database ... 50163 files and directories currently installed.)
Preparing to replace libgssrpc4:armel 1.10.1+dfsg-5+deb7u3 (using .../libgssrpc4_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libgssrpc4:armel ...
dpkg: libkadm5srv-mit8:armel: dependency problems, but removing anyway as you requested:
krb5-multidev depends on libkadm5srv-mit8 (= 1.10.1+dfsg-5+deb7u3); however:
Package libkadm5srv-mit8:armel is to be removed.
(Reading database ... 50162 files and directories currently installed.)
Removing libkadm5srv-mit8:armel ...
Selecting previously unselected package libkdb5-7:armel.
(Reading database ... 50157 files and directories currently installed.)
Unpacking libkdb5-7:armel (from .../libkdb5-7_1.12.1+dfsg-19_armel.deb) ...
Selecting previously unselected package libkadm5srv-mit9:armel.
Unpacking libkadm5srv-mit9:armel (from .../libkadm5srv-mit9_1.12.1+dfsg-19_armel.deb) ...
Selecting previously unselected package libkadm5clnt-mit9:armel.
Unpacking libkadm5clnt-mit9:armel (from .../libkadm5clnt-mit9_1.12.1+dfsg-19_armel.deb) ...
Preparing to replace libkrb5-dev 1.10.1+dfsg-5+deb7u3 (using .../libkrb5-dev_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libkrb5-dev ...
Preparing to replace krb5-multidev 1.10.1+dfsg-5+deb7u3 (using .../krb5-multidev_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement krb5-multidev ...
Preparing to replace libk5crypto3:armel 1.10.1+dfsg-5+deb7u3 (using .../libk5crypto3_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libk5crypto3:armel ...
Preparing to replace libgssapi-krb5-2:armel 1.10.1+dfsg-5+deb7u3 (using .../libgssapi-krb5-2_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libgssapi-krb5-2:armel ...
Preparing to replace libkrb5support0:armel 1.10.1+dfsg-5+deb7u3 (using .../libkrb5support0_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libkrb5support0:armel ...
Preparing to replace libkrb5-3:armel 1.10.1+dfsg-5+deb7u3 (using .../libkrb5-3_1.12.1+dfsg-19_armel.deb) ...
Unpacking replacement libkrb5-3:armel ...
Preparing to replace nfs-kernel-server 1:1.2.6-4 (using .../nfs-kernel-server_1%3a1.2.8-9_armel.deb) ...
Unpacking replacement nfs-kernel-server ...
Preparing to replace nfs-common 1:1.2.6-4 (using .../nfs-common_1%3a1.2.8-9_armel.deb) ...
Unpacking replacement nfs-common ...
dpkg: warning: unable to delete old directory '/var/lib/nfs/rpc_pipefs': Device or resource busy
Preparing to replace libtirpc1:armel 0.2.2-5 (using .../libtirpc1_0.2.5-1_armel.deb) ...
Unpacking replacement libtirpc1:armel ...
Preparing to replace locales 2.13-38+deb7u8 (using .../locales_2.19-15_all.deb) ...
Unpacking replacement locales ...
Preparing to replace locales-all 2.13-38+deb7u8 (using .../locales-all_2.19-15_armel.deb) ...
Unpacking replacement locales-all ...
Preparing to replace libc6:armel 2.13-38+deb7u8 (using .../libc6_2.19-15_armel.deb) ...
Checking for services that may need to be restarted...
Checking init scripts...
Unpacking replacement libc6:armel ...
Processing triggers for man-db ...
Setting up libc6:armel (2.19-15) ...
Checking for services that may need to be restarted...
Checking init scripts...
Restarting services possibly affected by the upgrade:
samba: restarting...done.
postfix: restarting...done.
cron: restarting...done.
atd: restarting...done.
apache2: restarting...done.
Services restarted successfully.
(Reading database ... 50690 files and directories currently installed.)
Preparing to replace sysvinit-utils 2.88dsf-41+deb7u1 (using .../sysvinit-utils_2.88dsf-58_armel.deb) ...
Unpacking replacement sysvinit-utils ...
Selecting previously unselected package startpar.
Unpacking startpar (from .../startpar_0.59-3_armel.deb) ...
Processing triggers for man-db ...
Setting up startpar (0.59-3) ...
Installing new version of config file /etc/init/startpar-bridge.conf ...
Setting up sysvinit-utils (2.88dsf-58) ...
(Reading database ... 50697 files and directories currently installed.)
Preparing to replace sysv-rc 2.88dsf-41+deb7u1 (using .../sysv-rc_2.88dsf-58_all.deb) ...
Unpacking replacement sysv-rc ...
Processing triggers for man-db ...
Setting up sysv-rc (2.88dsf-58) ...
(Reading database ... 50697 files and directories currently installed.)
Preparing to replace initscripts 2.88dsf-41+deb7u1 (using .../initscripts_2.88dsf-58_armel.deb) ...
Removing unmodified and obsolete conffile /etc/init.d/mtab.sh ...
Moving obsolete conffile /etc/init.d/bootlogd out of the way...
Moving obsolete conffile /etc/init.d/stop-bootlogd-single out of the way...
Moving obsolete conffile /etc/init.d/stop-bootlogd out of the way...
Unpacking replacement initscripts ...
Processing triggers for man-db ...
Setting up initscripts (2.88dsf-58) ...
Installing new version of config file /etc/init.d/bootmisc.sh ...
Installing new version of config file /etc/init.d/checkfs.sh ...
Installing new version of config file /etc/init.d/checkroot.sh ...
Installing new version of config file /etc/init.d/checkroot-bootclean.sh ...
Installing new version of config file /etc/init.d/halt ...
Installing new version of config file /etc/init.d/killprocs ...
Installing new version of config file /etc/init.d/mountall.sh ...
Installing new version of config file /etc/init.d/mountall-bootclean.sh ...
Installing new version of config file /etc/init.d/mountnfs.sh ...
Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ...
Installing new version of config file /etc/init.d/mountdevsubfs.sh ...
Installing new version of config file /etc/init.d/mountkernfs.sh ...
Installing new version of config file /etc/init.d/rc.local ...
Installing new version of config file /etc/init.d/reboot ...
Installing new version of config file /etc/init.d/rmnologin ...
Installing new version of config file /etc/init.d/sendsigs ...
Installing new version of config file /etc/init.d/single ...
Installing new version of config file /etc/init.d/umountfs ...
Installing new version of config file /etc/init.d/umountnfs.sh ...
Installing new version of config file /etc/init.d/umountroot ...
Installing new version of config file /etc/network/if-up.d/mountnfs ...
Removing obsolete conffile /etc/init.d/bootlogd ...
Removing obsolete conffile /etc/init.d/stop-bootlogd-single ...
Removing obsolete conffile /etc/init.d/stop-bootlogd ...
(Reading database ... 50693 files and directories currently installed.)
Preparing to replace libc-bin 2.13-38+deb7u8 (using .../libc-bin_2.19-15_armel.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
Setting up libc-bin (2.19-15) ...
Installing new version of config file /etc/bindresvport.blacklist ...
Installing new version of config file /etc/gai.conf ...
(Reading database ... 50693 files and directories currently installed.)
Preparing to replace libc6-dev:armel 2.13-38+deb7u8 (using .../libc6-dev_2.19-15_armel.deb) ...
Unpacking replacement libc6-dev:armel ...
Preparing to replace libc-dev-bin 2.13-38+deb7u8 (using .../libc-dev-bin_2.19-15_armel.deb) ...
Unpacking replacement libc-dev-bin ...
Preparing to replace libgomp1:armel 4.7.2-5 (using .../libgomp1_4.9.2-10_armel.deb) ...
Unpacking replacement libgomp1:armel ...
Processing triggers for man-db ...
dpkg: gcc-4.7-base:armel: dependency problems, but removing anyway as you requested:
libstdc++6:armel depends on gcc-4.7-base (= 4.7.2-5).
libgfortran3:armel depends on gcc-4.7-base (= 4.7.2-5).
libgcc1:armel depends on gcc-4.7-base (= 4.7.2-5).
(Reading database ... 50710 files and directories currently installed.)
Removing gcc-4.7-base:armel ...
Selecting previously unselected package gcc-4.9-base:armel.
(Reading database ... 50704 files and directories currently installed.)
Unpacking gcc-4.9-base:armel (from .../gcc-4.9-base_4.9.2-10_armel.deb) ...
Setting up gcc-4.9-base:armel (4.9.2-10) ...
(Reading database ... 50711 files and directories currently installed.)
Preparing to replace libstdc++6:armel 4.7.2-5 (using .../libstdc++6_4.9.2-10_armel.deb) ...
Unpacking replacement libstdc++6:armel ...
Setting up libstdc++6:armel (4.9.2-10) ...
Processing triggers for libc-bin ...
(Reading database ... 50724 files and directories currently installed.)
Preparing to replace libgfortran3:armel 4.7.2-5 (using .../libgfortran3_4.9.2-10_armel.deb) ...
Unpacking replacement libgfortran3:armel ...
Preparing to replace libgcc1:armel 1:4.7.2-5 (using .../libgcc1_1%3a4.9.2-10_armel.deb) ...
Unpacking replacement libgcc1:armel ...
Setting up libgcc1:armel (1:4.9.2-10) ...
Processing triggers for libc-bin ...
(Reading database ... 50724 files and directories currently installed.)
Preparing to replace comerr-dev 2.1-1.42.5-1.1+deb7u1 (using .../comerr-dev_2.1-1.42.12-1.1_armel.deb) ...
Unpacking replacement comerr-dev ...
Preparing to replace libcomerr2:armel 1.42.5-1.1+deb7u1 (using .../libcomerr2_1.42.12-1.1_armel.deb) ...
Unpacking replacement libcomerr2:armel ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Setting up libcomerr2:armel (1.42.12-1.1) ...
Processing triggers for libc-bin ...
(Reading database ... 50714 files and directories currently installed.)
Preparing to replace libblkid1:armel 2.20.1-5.3 (using .../libblkid1_2.25.2-5_armel.deb) ...
Unpacking replacement libblkid1:armel ...
Setting up libblkid1:armel (2.25.2-5) ...
Processing triggers for libc-bin ...
(Reading database ... 50714 files and directories currently installed.)
Preparing to replace debianutils 4.3.2 (using .../debianutils_4.4+b1_armel.deb) ...
Unpacking replacement debianutils ...
Processing triggers for man-db ...
Setting up debianutils (4.4+b1) ...
(Reading database ... 50735 files and directories currently installed.)
Preparing to replace coreutils 8.13-3.5 (using .../coreutils_8.23-4_armel.deb) ...
Unpacking replacement coreutils ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Setting up coreutils (8.23-4) ...
Selecting previously unselected package libudev1:armel.
(Reading database ... 50741 files and directories currently installed.)
Unpacking libudev1:armel (from .../libudev1_215-12_armel.deb) ...
Setting up libudev1:armel (215-12) ...
Processing triggers for libc-bin ...
(Reading database ... 50747 files and directories currently installed.)
Preparing to replace libkmod2:armel 9-3 (using .../libkmod2_18-3_armel.deb) ...
Unpacking replacement libkmod2:armel ...
Setting up libkmod2:armel (18-3) ...
Processing triggers for libc-bin ...
(Reading database ... 50747 files and directories currently installed.)
Preparing to replace kmod 9-3 (using .../archives/kmod_18-3_armel.deb) ...
Unpacking replacement kmod ...
Preparing to replace libmount1 2.20.1-5.3 (using .../libmount1_2.25.2-5_armel.deb) ...
Unpacking replacement libmount1:armel ...
Processing triggers for man-db ...
Setting up libmount1:armel (2.25.2-5) ...
Processing triggers for libc-bin ...
Selecting previously unselected package libsmartcols1:armel.
(Reading database ... 50749 files and directories currently installed.)
Unpacking libsmartcols1:armel (from .../libsmartcols1_2.25.2-5_armel.deb) ...
Setting up libsmartcols1:armel (2.25.2-5) ...
Processing triggers for libc-bin ...
(Reading database ... 50755 files and directories currently installed.)
Preparing to replace util-linux 2.20.1-5.3 (using .../util-linux_2.25.2-5_armel.deb) ...
Unpacking replacement util-linux ...
Processing triggers for mime-support ...
Processing triggers for man-db ...
Processing triggers for install-info ...
Setting up util-linux (2.25.2-5) ...
Installing new version of config file /etc/init.d/hwclock.sh ...
Selecting previously unselected package libprocps3:armel.
(Reading database ... 50869 files and directories currently installed.)
Unpacking libprocps3:armel (from .../libprocps3_2%3a3.3.9-9_armel.deb) ...
Setting up libprocps3:armel (2:3.3.9-9) ...
Processing triggers for libc-bin ...
(Reading database ... 50876 files and directories currently installed.)
Preparing to replace libtinfo-dev:armel 5.9-10 (using .../libtinfo-dev_5.9+20140913-1+b1_armel.deb) ...
Unpacking replacement libtinfo-dev:armel ...
Preparing to replace libtinfo5:armel 5.9-10 (using .../libtinfo5_5.9+20140913-1+b1_armel.deb) ...
Unpacking replacement libtinfo5:armel ...
Setting up libtinfo5:armel (5.9+20140913-1+b1) ...
Processing triggers for libc-bin ...
(Reading database ... 50877 files and directories currently installed.)
Preparing to replace libncurses5:armel 5.9-10 (using .../libncurses5_5.9+20140913-1+b1_armel.deb) ...
Unpacking replacement libncurses5:armel ...
Setting up libncurses5:armel (5.9+20140913-1+b1) ...
Processing triggers for libc-bin ...
(Reading database ... 50877 files and directories currently installed.)
Preparing to replace libncursesw5:armel 5.9-10 (using .../libncursesw5_5.9+20140913-1+b1_armel.deb) ...
Unpacking replacement libncursesw5:armel ...
Setting up libncursesw5:armel (5.9+20140913-1+b1) ...
Processing triggers for libc-bin ...
(Reading database ... 50877 files and directories currently installed.)
Preparing to replace procps 1:3.3.3-3 (using .../procps_2%3a3.3.9-9_armel.deb) ...
Unpacking replacement procps ...
Processing triggers for man-db ...
Setting up procps (2:3.3.9-9) ...
Installing new version of config file /etc/init.d/procps ...
Installing new version of config file /etc/sysctl.conf ...
[ ok ] Setting kernel variables ...done.
(Reading database ... 50877 files and directories currently installed.)
Preparing to replace udev 175-7.2 (using .../archives/udev_215-12_armel.deb) ...
Moving obsolete conffile /etc/init.d/udev-mtab out of the way...
Moving obsolete conffile /etc/udev/links.conf out of the way...
Unpacking replacement udev ...
Processing triggers for man-db ...
Setting up udev (215-12) ...
Installing new version of config file /etc/init.d/udev ...
Installing new version of config file /etc/init/udev-finish.conf ...
Installing new version of config file /etc/init/udev.conf ...
Installing new version of config file /etc/modprobe.d/fbdev-blacklist.conf ...
Installing new version of config file /etc/udev/udev.conf ...
[ ok ] Stopping the hotplug events dispatcher: udevd.
[ ok ] Starting the hotplug events dispatcher: udevd.
update-initramfs: deferring update (trigger activated)
Removing obsolete conffile /etc/init.d/udev-mtab ...
Removing obsolete conffile /etc/udev/links.conf ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
flash-kernel: installing version 3.2.0-4-kirkwood
Generating kernel u-boot image... done.
Flashing kernel (1613968/2097152 bytes)... done.
Flashing initramfs (4215899/9437184 bytes)... done.
(Reading database ... 50816 files and directories currently installed.)
Preparing to replace libdevmapper1.02.1:armel 2:1.02.74-8 (using .../libdevmapper1.02.1_2%3a1.02.90-2.1_armel.deb) ...
Unpacking replacement libdevmapper1.02.1:armel ...
Preparing to replace dmsetup 2:1.02.74-8 (using .../dmsetup_2%3a1.02.90-2.1_armel.deb) ...
Unpacking replacement dmsetup ...
Processing triggers for man-db ...
Setting up dmsetup (2:1.02.90-2.1) ...
update-initramfs: deferring update (trigger activated)
Setting up libdevmapper1.02.1:armel (2:1.02.90-2.1) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
flash-kernel: installing version 3.2.0-4-kirkwood
Generating kernel u-boot image... done.
Flashing kernel (1613968/2097152 bytes)... done.
Flashing initramfs (4251633/9437184 bytes)... done.
Processing triggers for libc-bin ...
(Reading database ... 50813 files and directories currently installed.)
Preparing to replace libevent-2.0-5:armel 2.0.19-stable-3+deb7u1 (using .../libevent-2.0-5_2.0.21-stable-2_armel.deb) ...
Unpacking replacement libevent-2.0-5:armel ...
Preparing to replace rpcbind 0.2.0-8 (using .../rpcbind_0.2.1-6_armel.deb) ...
[ ok ] Stopping rpcbind daemon....
Unpacking replacement rpcbind ...
Preparing to replace libdbus-1-dev 1.6.8-1+deb7u6 (using .../libdbus-1-dev_1.8.16-1_armel.deb) ...
Unpacking replacement libdbus-1-dev:armel ...
Preparing to replace libdbus-1-3:armel 1.6.8-1+deb7u6 (using .../libdbus-1-3_1.8.16-1_armel.deb) ...
Unpacking replacement libdbus-1-3:armel ...
Selecting previously unselected package libjpeg62-turbo:armel.
Unpacking libjpeg62-turbo:armel (from .../libjpeg62-turbo_1%3a1.3.1-12_armel.deb) ...
Selecting previously unselected package libtiff5:armel.
Unpacking libtiff5:armel (from .../libtiff5_4.0.3-12.3_armel.deb) ...
Selecting previously unselected package libcupsfilters1:armel.
Unpacking libcupsfilters1:armel (from .../libcupsfilters1_1.0.61-5_armel.deb) ...
Preparing to replace libcupsimage2:armel 1.5.3-5+deb7u5 (using .../libcupsimage2_1.7.5-11_armel.deb) ...
Unpacking replacement libcupsimage2:armel ...
Selecting previously unselected package libnettle4:armel.
Unpacking libnettle4:armel (from .../libnettle4_2.7.1-5_armel.deb) ...
Selecting previously unselected package libhogweed2:armel.
Unpacking libhogweed2:armel (from .../libhogweed2_2.7.1-5_armel.deb) ...
Preparing to replace libp11-kit-dev 0.12-3 (using .../libp11-kit-dev_0.20.7-1_armel.deb) ...
Unpacking replacement libp11-kit-dev ...
Selecting previously unselected package libffi6:armel.
Unpacking libffi6:armel (from .../libffi6_3.1-2+b2_armel.deb) ...
Preparing to replace libp11-kit0:armel 0.12-3 (using .../libp11-kit0_0.20.7-1_armel.deb) ...
Unpacking replacement libp11-kit0:armel ...
Selecting previously unselected package libtasn1-6:armel.
Unpacking libtasn1-6:armel (from .../libtasn1-6_4.2-2_armel.deb) ...
Selecting previously unselected package libgnutls-deb0-28:armel.
Unpacking libgnutls-deb0-28:armel (from .../libgnutls-deb0-28_3.3.8-6_armel.deb) ...
Preparing to replace libcups2-dev 1.5.3-5+deb7u5 (using .../libcups2-dev_1.7.5-11_armel.deb) ...
Unpacking replacement libcups2-dev:armel ...
Preparing to replace libcups2:armel 1.5.3-5+deb7u5 (using .../libcups2_1.7.5-11_armel.deb) ...
Unpacking replacement libcups2:armel ...
Selecting previously unselected package libdb5.3:armel.
Unpacking libdb5.3:armel (from .../libdb5.3_5.3.28-9_armel.deb) ...
Processing triggers for man-db ...
Setting up libdb5.3:armel (5.3.28-9) ...
Processing triggers for libc-bin ...
(Reading database ... 50898 files and directories currently installed.)
Preparing to replace libxml2:armel 2.8.0+dfsg1-7+wheezy3 (using .../libxml2_2.9.1+dfsg1-5_armel.deb) ...
Unpacking replacement libxml2:armel ...
Preparing to replace libapr1 1.4.6-3+deb7u1 (using .../libapr1_1.5.1-3_armel.deb) ...
Unpacking replacement libapr1:armel ...
Preparing to replace libsasl2-2:armel 2.1.25.dfsg1-6+deb7u1 (using .../libsasl2-2_2.1.26.dfsg1-13_armel.deb) ...
Unpacking replacement libsasl2-2:armel ...
Selecting previously unselected package libsasl2-modules-db:armel.
Unpacking libsasl2-modules-db:armel (from .../libsasl2-modules-db_2.1.26.dfsg1-13_armel.deb) ...
Preparing to replace libldap-2.4-2:armel 2.4.31-2 (using .../libldap-2.4-2_2.4.40-4_armel.deb) ...
Unpacking replacement libldap-2.4-2:armel ...
Preparing to replace libaprutil1-ldap 1.4.1-3 (using .../libaprutil1-ldap_1.5.4-1_armel.deb) ...
Unpacking replacement libaprutil1-ldap:armel ...
Preparing to replace libaprutil1-dbd-sqlite3 1.4.1-3 (using .../libaprutil1-dbd-sqlite3_1.5.4-1_armel.deb) ...
Unpacking replacement libaprutil1-dbd-sqlite3:armel ...
Preparing to replace libaprutil1 1.4.1-3 (using .../libaprutil1_1.5.4-1_armel.deb) ...
Unpacking replacement libaprutil1:armel ...
Preparing to replace apache2-utils 2.2.22-13+deb7u4 (using .../apache2-utils_2.4.10-10_armel.deb) ...
Unpacking replacement apache2-utils ...
Preparing to replace libapache2-mod-php5 5.4.39-0+deb7u2 (using .../libapache2-mod-php5_5.6.7+dfsg-1_armel.deb) ...
Unpacking replacement libapache2-mod-php5 ...
Preparing to replace apache2-mpm-prefork 2.2.22-13+deb7u4 (using .../apache2-mpm-prefork_2.4.10-10_armel.deb) ...
[....] Stopping web server: apache2
[warn] The apache2 configtest failed, so we are trying to kill it manually. This is almost certainly suboptimal, so please make sure your system is working as you'd expect now! ... (warning).
[ ok waiting .
Unpacking replacement apache2-mpm-prefork ...
Preparing to replace apache2.2-common 2.2.22-13+deb7u4 (using .../apache2.2-common_2.4.10-10_armel.deb) ...
Moving obsolete conffile /etc/apache2/mods-available/disk_cache.conf out of the way...
Moving obsolete conffile /etc/apache2/mods-available/authz_default.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/authn_default.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/mem_cache.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/mem_cache.conf out of the way...
Moving obsolete conffile /etc/apache2/mods-available/authn_alias.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/cern_meta.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/disk_cache.load out of the way...
Moving obsolete conffile /etc/apache2/mods-available/imagemap.load out of the way...
Unpacking replacement apache2.2-common ...
dpkg: warning: unable to delete old directory '/etc/apache2/sites-enabled': Directory not empty
dpkg: warning: unable to delete old directory '/etc/apache2/sites-available': Directory not empty
dpkg: warning: unable to delete old directory '/etc/apache2/conf.d': Directory not empty
dpkg: warning: unable to delete old directory '/etc/apache2/mods-enabled': Directory not empty
dpkg: warning: unable to delete old directory '/var/cache/apache2': Directory not empty
dpkg: warning: unable to delete old directory '/var/log/apache2': Directory not empty
dpkg: warning: unable to delete old directory '/var/www': Directory not empty
Selecting previously unselected package apache2-data.
Unpacking apache2-data (from .../apache2-data_2.4.10-10_all.deb) ...
Preparing to replace libpipeline1:armel 1.2.1-1 (using .../libpipeline1_1.4.0-1_armel.deb) ...
Unpacking replacement libpipeline1:armel ...
Preparing to replace man-db 2.6.2-1 (using .../man-db_2.7.0.2-5_armel.deb) ...
Unpacking replacement man-db ...
Preparing to replace dpkg 1.16.15 (using .../dpkg_1.17.24_armel.deb) ...
Unpacking replacement dpkg ...
Processing triggers for mime-support ...
Setting up dpkg (1.17.24) ...
Installing new version of config file /etc/cron.daily/dpkg ...
(Reading database ... 50888 files and directories currently installed.)
Preparing to unpack .../perl_5.20.2-2_armel.deb ...
Unpacking perl (5.20.2-2) over (5.14.2-21+deb7u2) ...
Preparing to unpack .../perl-modules_5.20.2-2_all.deb ...
Unpacking perl-modules (5.20.2-2) over (5.14.2-21+deb7u2) ...
Selecting previously unselected package libperl5.20.
Preparing to unpack .../libperl5.20_5.20.2-2_armel.deb ...
Unpacking libperl5.20 (5.20.2-2) ...
Preparing to unpack .../elinks-data_0.12~pre6-5_all.deb ...
Unpacking elinks-data (0.12~pre6-5) over (0.12~pre5-9) ...
Preparing to unpack .../elinks_0.12~pre6-5+b2_armel.deb ...
Unpacking elinks (0.12~pre6-5+b2) over (0.12~pre5-9) ...
Preparing to unpack .../libglib2.0-0_2.42.1-1_armel.deb ...
Unpacking libglib2.0-0:armel (2.42.1-1) over (2.33.12+really2.32.4-5) ...
Selecting previously unselected package libval14:armel.
Preparing to unpack .../libval14_2.0-1.1_armel.deb ...
Unpacking libval14:armel (2.0-1.1) ...
Preparing to unpack .../irssi_0.8.17-1_armel.deb ...
Unpacking irssi (0.8.17-1) over (0.8.15-5) ...
Processing triggers for mime-support (3.58) ...
(Reading database ... 50693 files and directories currently installed.)
Removing libperl5.14 (5.14.2-21+deb7u2) ...
(Reading database ... 50692 files and directories currently installed.)
Preparing to unpack .../libtext-charwidth-perl_0.04-7+b3_armel.deb ...
Unpacking libtext-charwidth-perl (0.04-7+b3) over (0.04-7+b1) ...
Preparing to unpack .../perl-base_5.20.2-2_armel.deb ...
Unpacking perl-base (5.20.2-2) over (5.14.2-21+deb7u2) ...
Setting up perl-base (5.20.2-2) ...
(Reading database ... 50180 files and directories currently installed.)
Preparing to unpack .../liblocale-gettext-perl_1.05-8+b1_armel.deb ...
Unpacking liblocale-gettext-perl (1.05-8+b1) over (1.05-7+b1) ...
Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-3+b1_armel.deb ...
Unpacking libalgorithm-diff-xs-perl (0.04-3+b1) over (0.04-2+b1) ...
Preparing to unpack .../libyaml-syck-perl_1.27-2+b2_armel.deb ...
Unpacking libyaml-syck-perl (1.27-2+b2) over (1.20-1) ...
Preparing to unpack .../libuuid-perl_0.05-1+b1_armel.deb ...
Unpacking libuuid-perl (0.05-1+b1) over (0.02-5) ...
Preparing to unpack .../libtext-iconv-perl_1.7-5+b2_armel.deb ...
Unpacking libtext-iconv-perl (1.7-5+b2) over (1.7-5) ...
Selecting previously unselected package init-system-helpers.
Preparing to unpack .../init-system-helpers_1.22_all.deb ...
Unpacking init-system-helpers (1.22) ...
Preparing to unpack .../cron_3.0pl1-127_armel.deb ...
[ ok ] Stopping periodic command scheduler: cron.
Unpacking cron (3.0pl1-127) over (3.0pl1-124) ...
Selecting previously unselected package apache2.
Preparing to unpack .../apache2_2.4.10-10_armel.deb ...
Unpacking apache2 (2.4.10-10) ...
Preparing to unpack .../apache2.2-bin_2.4.10-10_armel.deb ...
Unpacking apache2.2-bin (2.4.10-10) over (2.2.22-13+deb7u4) ...
Selecting previously unselected package apache2-bin.
Preparing to unpack .../apache2-bin_2.4.10-10_armel.deb ...
Unpacking apache2-bin (2.4.10-10) ...
Selecting previously unselected package librtmp1:armel.
Preparing to unpack .../librtmp1_1%3a2.4+20130918.git79459a2-dmo6_armel.deb ...
Unpacking librtmp1:armel (1:2.4+20130918.git79459a2-dmo6) ...
Preparing to unpack .../curl_7.38.0-4_armel.deb ...
Unpacking curl (7.38.0-4) over (7.26.0-1+wheezy12) ...
Selecting previously unselected package libgcrypt20:armel.
Preparing to unpack .../libgcrypt20_1.6.3-2_armel.deb ...
Unpacking libgcrypt20:armel (1.6.3-2) ...
Setting up libgcrypt20:armel (1.6.3-2) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 50337 files and directories currently installed.)
Preparing to unpack .../libssh2-1_1.4.3-4.1_armel.deb ...
Unpacking libssh2-1:armel (1.4.3-4.1) over (1.4.2-1.1+deb7u1) ...
Preparing to unpack .../libcurl3_7.38.0-4_armel.deb ...
Unpacking libcurl3:armel (7.38.0-4) over (7.26.0-1+wheezy12) ...
Preparing to unpack .../php5-curl_5.6.7+dfsg-1_armel.deb ...
Unpacking php5-curl (5.6.7+dfsg-1) over (5.4.39-0+deb7u2) ...
Preparing to unpack .../ttf-dejavu-core_2.34-1_all.deb ...
Unpacking ttf-dejavu-core (2.34-1) over (2.33-3) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../fonts-dejavu-core_2.34-1_all.deb ...
Unpacking fonts-dejavu-core (2.34-1) ...
Preparing to unpack .../libfontconfig1_2.11.0-6.3_armel.deb ...
Unpacking libfontconfig1:armel (2.11.0-6.3) over (2.9.0-7.1) ...
Preparing to unpack .../fontconfig-config_2.11.0-6.3_all.deb ...
Unpacking fontconfig-config (2.11.0-6.3) over (2.9.0-7.1) ...
Selecting previously unselected package libvpx1:armel.
Preparing to unpack .../libvpx1_1.3.0-3_armel.deb ...
Unpacking libvpx1:armel (1.3.0-3) ...
Preparing to unpack .../libx11-6_2%3a1.6.2-3_armel.deb ...
Unpacking libx11-6:armel (2:1.6.2-3) over (2:1.5.0-1+deb7u1) ...
Selecting previously unselected package libgd3:armel.
Preparing to unpack .../libgd3_2.1.0-5_armel.deb ...
Unpacking libgd3:armel (2.1.0-5) ...
Preparing to unpack .../php5-gd_5.6.7+dfsg-1_armel.deb ...
Unpacking php5-gd (5.6.7+dfsg-1) over (5.4.39-0+deb7u2) ...
Selecting previously unselected package libjson-c2:armel.
Preparing to unpack .../libjson-c2_0.11-4_armel.deb ...
Unpacking libjson-c2:armel (0.11-4) ...
Preparing to unpack .../php5-cli_5.6.7+dfsg-1_armel.deb ...
Unpacking php5-cli (5.6.7+dfsg-1) over (5.4.39-0+deb7u2) ...
Preparing to unpack .../php5-common_5.6.7+dfsg-1_armel.deb ...
Unpacking php5-common (5.6.7+dfsg-1) over (5.4.39-0+deb7u2) ...
dpkg: warning: unable to delete old directory '/etc/php5/conf.d': Directory not empty
Selecting previously unselected package php5-json.
Preparing to unpack .../php5-json_1.3.6-1_armel.deb ...
Unpacking php5-json (1.3.6-1) ...
Preparing to unpack .../file_1%3a5.22+15-2_armel.deb ...
Unpacking file (1:5.22+15-2) over (5.11-2+deb7u8) ...
Preparing to unpack .../libmagic1_1%3a5.22+15-2_armel.deb ...
Unpacking libmagic1:armel (1:5.22+15-2) over (5.11-2+deb7u8) ...
Preparing to unpack .../libedit2_3.1-20140620-2_armel.deb ...
Unpacking libedit2:armel (3.1-20140620-2) over (2.11-20080614-5) ...
Selecting previously unselected package libaudit-common.
Preparing to unpack .../libaudit-common_1%3a2.4-1_all.deb ...
Unpacking libaudit-common (1:2.4-1) ...
Setting up libaudit-common (1:2.4-1) ...
Selecting previously unselected package libaudit1:armel.
(Reading database ... 50435 files and directories currently installed.)
Preparing to unpack .../libaudit1_1%3a2.4-1+b1_armel.deb ...
Unpacking libaudit1:armel (1:2.4-1+b1) ...
Setting up libaudit1:armel (1:2.4-1+b1) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 50442 files and directories currently installed.)
Preparing to unpack .../libpam0g-dev_1.1.8-3.1_armel.deb ...
Unpacking libpam0g-dev:armel (1.1.8-3.1) over (1.1.3-7.1) ...
Preparing to unpack .../libpam0g_1.1.8-3.1_armel.deb ...
Unpacking libpam0g:armel (1.1.8-3.1) over (1.1.3-7.1) ...
Setting up libpam0g:armel (1.1.8-3.1) ...
Processing triggers for libc-bin (2.19-15) ...
Selecting previously unselected package libpython3.4-minimal:armel.
(Reading database ... 50442 files and directories currently installed.)
Preparing to unpack .../libpython3.4-minimal_3.4.2-1_armel.deb ...
Unpacking libpython3.4-minimal:armel (3.4.2-1) ...
Selecting previously unselected package python3.4-minimal.
Preparing to unpack .../python3.4-minimal_3.4.2-1_armel.deb ...
Unpacking python3.4-minimal (3.4.2-1) ...
Preparing to unpack .../python3_3.4.2-2_armel.deb ...
running python pre-rtupdate hooks for python3.4...
Unpacking python3 (3.4.2-2) over (3.2.3-6) ...
Preparing to unpack .../python3-minimal_3.4.2-2_armel.deb ...
Unpacking python3-minimal (3.4.2-2) over (3.2.3-6) ...
Selecting previously unselected package libmpdec2:armel.
Preparing to unpack .../libmpdec2_2.4.1-1_armel.deb ...
Unpacking libmpdec2:armel (2.4.1-1) ...
Preparing to unpack .../libreadline-dev_6.3-8+b3_armel.deb ...
Unpacking libreadline-dev:armel (6.3-8+b3) over (6.2+dfsg-0.1) ...
Preparing to unpack .../libreadline6-dev_6.3-8+b3_armel.deb ...
Unpacking libreadline6-dev:armel (6.3-8+b3) over (6.2+dfsg-0.1) ...
Preparing to unpack .../libreadline6_6.3-8+b3_armel.deb ...
Unpacking libreadline6:armel (6.3-8+b3) over (6.2+dfsg-0.1) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up libreadline6:armel (6.3-8+b3) ...
Processing triggers for libc-bin (2.19-15) ...
Selecting previously unselected package libpython3.4-stdlib:armel.
(Reading database ... 50658 files and directories currently installed.)
Preparing to unpack .../libpython3.4-stdlib_3.4.2-1_armel.deb ...
Unpacking libpython3.4-stdlib:armel (3.4.2-1) ...
Selecting previously unselected package python3.4.
Preparing to unpack .../python3.4_3.4.2-1_armel.deb ...
Unpacking python3.4 (3.4.2-1) ...
Selecting previously unselected package libpython3-stdlib:armel.
Preparing to unpack .../libpython3-stdlib_3.4.2-2_armel.deb ...
Unpacking libpython3-stdlib:armel (3.4.2-2) ...
Selecting previously unselected package dh-python.
Preparing to unpack .../dh-python_1.20141111-2_all.deb ...
Unpacking dh-python (1.20141111-2) ...
Preparing to unpack .../tar_1.27.1-2+b1_armel.deb ...
Unpacking tar (1.27.1-2+b1) over (1.26+dfsg-0.1) ...
Processing triggers for mime-support (3.58) ...
Setting up tar (1.27.1-2+b1) ...
(Reading database ... 51303 files and directories currently installed.)
Preparing to unpack .../patch_2.7.5-1_armel.deb ...
Unpacking patch (2.7.5-1) over (2.6.1-3) ...
Preparing to unpack .../libdpkg-perl_1.17.24_all.deb ...
Unpacking libdpkg-perl (1.17.24) over (1.16.15) ...
Preparing to unpack .../devscripts_2.15.1_armel.deb ...
Unpacking devscripts (2.15.1) over (2.12.6+deb7u2) ...
Preparing to unpack .../dpkg-dev_1.17.24_all.deb ...
Unpacking dpkg-dev (1.17.24) over (1.16.15) ...
Preparing to unpack .../make_4.0-8.1_armel.deb ...
Unpacking make (4.0-8.1) over (3.81-8.2) ...
(Reading database ... 51296 files and directories currently installed.)
Removing libgnutls-dev (2.12.20-8+deb7u3) ...
(Reading database ... 51266 files and directories currently installed.)
Preparing to unpack .../bash_4.3-11+b1_armel.deb ...
Unpacking bash (4.3-11+b1) over (4.2+dfsg-0.1+deb7u3) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up bash (4.3-11+b1) ...
Installing new version of config file /etc/bash.bashrc ...
Installing new version of config file /etc/skel/.bashrc ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
Selecting previously unselected package libsystemd0:armel.
(Reading database ... 51275 files and directories currently installed.)
Preparing to unpack .../libsystemd0_215-12_armel.deb ...
Unpacking libsystemd0:armel (215-12) ...
Setting up libsystemd0:armel (215-12) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51280 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.25.2-5_armel.deb ...
Unpacking bsdutils (1:2.25.2-5) over (1:2.20.1-5.3) ...
Setting up bsdutils (1:2.25.2-5) ...
(Reading database ... 51284 files and directories currently installed.)
Preparing to unpack .../diffutils_1%3a3.3-1+b1_armel.deb ...
Unpacking diffutils (1:3.3-1+b1) over (1:3.2-6) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up diffutils (1:3.3-1+b1) ...
(Reading database ... 51286 files and directories currently installed.)
Preparing to unpack .../e2fslibs_1.42.12-1.1_armel.deb ...
Unpacking e2fslibs:armel (1.42.12-1.1) over (1.42.5-1.1+deb7u1) ...
Setting up e2fslibs:armel (1.42.12-1.1) ...
Processing triggers for libc-bin (2.19-15) ...
^[[?1;2c database ... 51286 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.42.12-1.1_armel.deb ...
Unpacking e2fsprogs (1.42.12-1.1) over (1.42.5-1.1+deb7u1) ...
Setting up e2fsprogs (1.42.12-1.1) ...
(Reading database ... 51291 files and directories currently installed.)
Preparing to unpack .../findutils_4.4.2-9+b1_armel.deb ...
Unpacking findutils (4.4.2-9+b1) over (4.4.2-4) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up findutils (4.4.2-9+b1) ...
(Reading database ... 51292 files and directories currently installed.)
Preparing to unpack .../archives/gzip_1.6-4_armel.deb ...
Unpacking gzip (1.6-4) over (1.5-1.1) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up gzip (1.6-4) ...
Selecting previously unselected package libcryptsetup4:armel.
(Reading database ... 51291 files and directories currently installed.)
Preparing to unpack .../libcryptsetup4_2%3a1.6.6-5_armel.deb ...
Unpacking libcryptsetup4:armel (2:1.6.6-5) ...
Setting up libcryptsetup4:armel (2:1.6.6-5) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51298 files and directories currently installed.)
Preparing to unpack .../mount_2.25.2-5_armel.deb ...
Unpacking mount (2.25.2-5) over (2.20.1-5.3) ...
Setting up mount (2.25.2-5) ...
Selecting previously unselected package acl.
(Reading database ... 51303 files and directories currently installed.)
Preparing to unpack .../acl_2.2.52-2_armel.deb ...
Unpacking acl (2.2.52-2) ...
Setting up acl (2.2.52-2) ...
Selecting previously unselected package systemd.
(Reading database ... 51326 files and directories currently installed.)
Preparing to unpack .../systemd_215-12_armel.deb ...
Unpacking systemd (215-12) ...
Setting up systemd (215-12) ...
Initializing machine ID from D-Bus machine ID.
Created symlink from /etc/systemd/system/getty.target.wants/getty@tty1.service to /lib/systemd/system/getty@.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/remote-fs.target to /lib/systemd/system/remote-fs.target.
Selecting previously unselected package systemd-sysv.
(Reading database ... 51942 files and directories currently installed.)
Preparing to unpack .../systemd-sysv_215-12_armel.deb ...
Unpacking systemd-sysv (215-12) ...
Replacing files in old package sysvinit (2.88dsf-41+deb7u1) ...
Setting up systemd-sysv (215-12) ...
Selecting previously unselected package init.
(Reading database ... 51946 files and directories currently installed.)
Preparing to unpack .../archives/init_1.22_armel.deb ...
Unpacking init (1.22) ...
Setting up init (1.22) ...
(Reading database ... 51949 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.1.8-3.1_armel.deb ...
Unpacking libpam-modules-bin (1.1.8-3.1) over (1.1.3-7.1) ...
Replacing files in old package libpam-modules:armel (1.1.3-7.1) ...
Setting up libpam-modules-bin (1.1.8-3.1) ...
(Reading database ... 51950 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.1.8-3.1_armel.deb ...
Unpacking libpam-modules:armel (1.1.8-3.1) over (1.1.3-7.1) ...
Setting up libpam-modules:armel (1.1.8-3.1) ...
Installing new version of config file /etc/security/time.conf ...
Installing new version of config file /etc/security/namespace.conf ...
Installing new version of config file /etc/security/limits.conf ...
Installing new version of config file /etc/security/namespace.init ...
Installing new version of config file /etc/security/pam_env.conf ...
(Reading database ... 51953 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.2-3_armel.deb ...
Unpacking login (1:4.2-3) over (1:4.1.5.1-1) ...
Setting up login (1:4.2-3) ...
Installing new version of config file /etc/login.defs ...
Installing new version of config file /etc/pam.d/login ...
Installing new version of config file /etc/pam.d/su ...
Installing new version of config file /etc/securetty ...
(Reading database ... 51953 files and directories currently installed.)
Preparing to unpack .../ncurses-bin_5.9+20140913-1+b1_armel.deb ...
Unpacking ncurses-bin (5.9+20140913-1+b1) over (5.9-10) ...
Setting up ncurses-bin (5.9+20140913-1+b1) ...
(Reading database ... 51953 files and directories currently installed.)
Preparing to unpack .../sysvinit_2.88dsf-58_armel.deb ...
Unpacking sysvinit (2.88dsf-58) over (2.88dsf-41+deb7u1) ...
Setting up sysvinit (2.88dsf-58) ...
(Reading database ... 51948 files and directories currently installed.)
Preparing to unpack .../libapt-pkg4.12_1.0.9.7_armel.deb ...
Unpacking libapt-pkg4.12:armel (1.0.9.7) over (0.9.7.9+deb7u7) ...
Setting up libapt-pkg4.12:armel (1.0.9.7) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51949 files and directories currently installed.)
Preparing to unpack .../libusb-0.1-4_2%3a0.1.12-25_armel.deb ...
Unpacking libusb-0.1-4:armel (2:0.1.12-25) over (2:0.1.12-20+nmu1) ...
Setting up libusb-0.1-4:armel (2:0.1.12-25) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51950 files and directories currently installed.)
Preparing to unpack .../gnupg_1.4.18-7_armel.deb ...
Unpacking gnupg (1.4.18-7) over (1.4.12-7+deb7u7) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Setting up gnupg (1.4.18-7) ...
(Reading database ... 51950 files and directories currently installed.)
Preparing to unpack .../archives/apt_1.0.9.7_armel.deb ...
Unpacking apt (1.0.9.7) over (0.9.7.9+deb7u7) ...
Setting up apt (1.0.9.7) ...
Installing new version of config file /etc/apt/apt.conf.d/01autoremove ...
Installing new version of config file /etc/cron.daily/apt ...
Processing triggers for libc-bin (2.19-15) ...
Selecting previously unselected package libdebconfclient0:armel.
(Reading database ... 51971 files and directories currently installed.)
Preparing to unpack .../libdebconfclient0_0.192_armel.deb ...
Unpacking libdebconfclient0:armel (0.192) ...
Setting up libdebconfclient0:armel (0.192) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51976 files and directories currently installed.)
Preparing to unpack .../base-passwd_3.5.37_armel.deb ...
Unpacking base-passwd (3.5.37) over (3.5.26) ...
Setting up base-passwd (3.5.37) ...
Changing shell of daemon from /bin/sh to /usr/sbin/nologin
Changing shell of bin from /bin/sh to /usr/sbin/nologin
Changing shell of sys from /bin/sh to /usr/sbin/nologin
Changing shell of games from /bin/sh to /usr/sbin/nologin
Changing shell of man from /bin/sh to /usr/sbin/nologin
Changing shell of lp from /bin/sh to /usr/sbin/nologin
Changing shell of mail from /bin/sh to /usr/sbin/nologin
Changing shell of news from /bin/sh to /usr/sbin/nologin
Changing shell of uucp from /bin/sh to /usr/sbin/nologin
Changing shell of proxy from /bin/sh to /usr/sbin/nologin
Changing shell of www-data from /bin/sh to /usr/sbin/nologin
Changing shell of backup from /bin/sh to /usr/sbin/nologin
Changing shell of list from /bin/sh to /usr/sbin/nologin
Changing shell of irc from /bin/sh to /usr/sbin/nologin
Changing shell of gnats from /bin/sh to /usr/sbin/nologin
Changing shell of nobody from /bin/sh to /usr/sbin/nologin
16 changes have been made, rewriting files
Writing passwd-file to /etc/passwd
Writing shadow-file to /etc/shadow
Writing group-file to /etc/group
(Reading database ... 51977 files and directories currently installed.)
Preparing to unpack .../libss2_1.42.12-1.1_armel.deb ...
Unpacking libss2:armel (1.42.12-1.1) over (1.42.5-1.1+deb7u1) ...
Setting up libss2:armel (1.42.12-1.1) ...
Processing triggers for libc-bin (2.19-15) ...
(Reading database ... 51977 files and directories currently installed.)
Preparing to unpack .../libsemanage-common_2.3-1_all.deb ...
Unpacking libsemanage-common (2.3-1) over (2.1.6-6) ...
Setting up libsemanage-common (2.3-1) ...
Installing new version of config file /etc/selinux/semanage.conf ...
(Reading database ... 51977 files and directories currently installed.)
Preparing to unpack .../libsemanage1_2.3-1+b1_armel.deb ...
Unpacking libsemanage1:armel (2.3-1+b1) over (2.1.6-6) ...
Setting up libsemanage1:armel (2.3-1+b1) ...
Processing triggers for libc-bin (2.19-15) ...
Selecting previously unselected package libboost-iostreams1.55.0:armel.
(Reading database ... 51978 files and directories currently installed.)
Preparing to unpack .../libboost-iostreams1.55.0_1.55.0+dfsg-3_armel.deb ...
Unpacking libboost-iostreams1.55.0:armel (1.55.0+dfsg-3) ...
Selecting previously unselected package libestr0.
Preparing to unpack .../libestr0_0.1.9-1.1_armel.deb ...
Unpacking libestr0 (0.1.9-1.1) ...
Selecting previously unselected package liblogging-stdlog0:armel.
Preparing to unpack .../liblogging-stdlog0_1.0.4-1_armel.deb ...
Unpacking liblogging-stdlog0:armel (1.0.4-1) ...
Selecting previously unselected package liblognorm1:armel.
Preparing to unpack .../liblognorm1_1.0.1-3_armel.deb ...
Unpacking liblognorm1:armel (1.0.1-3) ...
Preparing to unpack .../libnewt0.52_0.52.17-1+b1_armel.deb ...
Unpacking libnewt0.52:armel (0.52.17-1+b1) over (0.52.14-11.1) ...
Preparing to unpack .../libpopt0_1.16-10_armel.deb ...
Unpacking libpopt0:armel (1.16-10) over (1.16-7) ...
Preparing to unpack .../gettext_0.19.3-2_armel.deb ...
Unpacking gettext (0.19.3-2) over (0.18.1.1-9) ...
Preparing to unpack .../libgettextpo0_0.19.3-2_armel.deb ...
Unpacking libgettextpo0:armel (0.19.3-2) over (0.18.1.1-9) ...
Preparing to unpack .../libasprintf0c2_0.19.3-2_armel.deb ...
Unpacking libasprintf0c2:armel (0.19.3-2) over (0.18.1.1-9) ...
Preparing to unpack .../libcwidget3_0.5.17-2_armel.deb ...
Unpacking libcwidget3:armel (0.5.17-2) over (0.5.16-3.4) ...
Preparing to unpack .../libgnutls-openssl27_3.3.8-6_armel.deb ...
Unpacking libgnutls-openssl27:armel (3.3.8-6) over (2.12.20-8+deb7u3) ...
Preparing to unpack .../librpcsecgss3_0.19-7_armel.deb ...
Unpacking librpcsecgss3:armel (0.19-7) over (0.19-5) ...
Preparing to unpack .../python2.7_2.7.9-2_armel.deb ...
Unpacking python2.7 (2.7.9-2) over (2.7.3-6+deb7u2) ...
Preparing to unpack .../python2.7-minimal_2.7.9-2_armel.deb ...
Unpacking python2.7-minimal (2.7.9-2) over (2.7.3-6+deb7u2) ...
dpkg: warning: unable to delete old directory '/etc/python2.7': Directory not empty
Selecting previously unselected package libpython2.7-minimal:armel.
Preparing to unpack .../libpython2.7-minimal_2.7.9-2_armel.deb ...
Unpacking libpython2.7-minimal:armel (2.7.9-2) ...
Selecting previously unselected package libpython2.7-stdlib:armel.
Preparing to unpack .../libpython2.7-stdlib_2.7.9-2_armel.deb ...
Unpacking libpython2.7-stdlib:armel (2.7.9-2) ...
Preparing to unpack .../python-minimal_2.7.9-1_armel.deb ...
Unpacking python-minimal (2.7.9-1) over (2.7.3-4+deb7u1) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Processing triggers for mime-support (3.58) ...
Setting up libpython2.7-minimal:armel (2.7.9-2) ...
Setting up python2.7-minimal (2.7.9-2) ...
Setting up python-minimal (2.7.9-1) ...
(Reading database ... 52002 files and directories currently installed.)
Preparing to unpack .../python_2.7.9-1_armel.deb ...
Unpacking python (2.7.9-1) over (2.7.3-4+deb7u1) ...
Selecting previously unselected package libpython-stdlib:armel.
Preparing to unpack .../libpython-stdlib_2.7.9-1_armel.deb ...
Unpacking libpython-stdlib:armel (2.7.9-1) ...
Selecting previously unselected package fontconfig.
Preparing to unpack .../fontconfig_2.11.0-6.3_armel.deb ...
Unpacking fontconfig (2.11.0-6.3) ...
Selecting previously unselected package libasan1:armel.
Preparing to unpack .../libasan1_4.9.2-10_armel.deb ...
Unpacking libasan1:armel (4.9.2-10) ...
Selecting previously unselected package libroken18-heimdal:armel.
Preparing to unpack .../libroken18-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libroken18-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libasn1-8-heimdal:armel.
Preparing to unpack .../libasn1-8-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libasn1-8-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libassuan0:armel.
Preparing to unpack .../libassuan0_2.1.2-2_armel.deb ...
Unpacking libassuan0:armel (2.1.2-2) ...
Selecting previously unselected package libatk1.0-data.
Preparing to unpack .../libatk1.0-data_2.14.0-1_all.deb ...
Unpacking libatk1.0-data (2.14.0-1) ...
Selecting previously unselected package libatk1.0-0:armel.
Preparing to unpack .../libatk1.0-0_2.14.0-1_armel.deb ...
Unpacking libatk1.0-0:armel (2.14.0-1) ...
Selecting previously unselected package libatomic1:armel.
Preparing to unpack .../libatomic1_4.9.2-10_armel.deb ...
Unpacking libatomic1:armel (4.9.2-10) ...
Preparing to unpack .../libavahi-core7_0.6.31-4+b2_armel.deb ...
Unpacking libavahi-core7:armel (0.6.31-4+b2) over (0.6.31-2) ...
Selecting previously unselected package libboost-system1.55.0:armel.
Preparing to unpack .../libboost-system1.55.0_1.55.0+dfsg-3_armel.deb ...
Unpacking libboost-system1.55.0:armel (1.55.0+dfsg-3) ...
Selecting previously unselected package libboost-filesystem1.55.0:armel.
Preparing to unpack .../libboost-filesystem1.55.0_1.55.0+dfsg-3_armel.deb ...
Unpacking libboost-filesystem1.55.0:armel (1.55.0+dfsg-3) ...
Selecting previously unselected package libboost-serialization1.55.0:armel.
Preparing to unpack .../libboost-serialization1.55.0_1.55.0+dfsg-3_armel.deb ...
Unpacking libboost-serialization1.55.0:armel (1.55.0+dfsg-3) ...
Selecting previously unselected package libpixman-1-0:armel.
Preparing to unpack .../libpixman-1-0_0.32.6-3_armel.deb ...
Unpacking libpixman-1-0:armel (0.32.6-3) ...
Selecting previously unselected package libxcb-render0:armel.
Preparing to unpack .../libxcb-render0_1.10-3+b1_armel.deb ...
Unpacking libxcb-render0:armel (1.10-3+b1) ...
Selecting previously unselected package libxcb-shm0:armel.
Preparing to unpack .../libxcb-shm0_1.10-3+b1_armel.deb ...
Unpacking libxcb-shm0:armel (1.10-3+b1) ...
Preparing to unpack .../libxext6_2%3a1.3.3-1_armel.deb ...
Unpacking libxext6:armel (2:1.3.3-1) over (2:1.3.1-2+deb7u1) ...
Selecting previously unselected package libxrender1:armel.
Preparing to unpack .../libxrender1_1%3a0.9.8-1+b1_armel.deb ...
Unpacking libxrender1:armel (1:0.9.8-1+b1) ...
Selecting previously unselected package libcairo2:armel.
Preparing to unpack .../libcairo2_1.14.0-2.1_armel.deb ...
Unpacking libcairo2:armel (1.14.0-2.1) ...
Selecting previously unselected package libisl10:armel.
Preparing to unpack .../libisl10_0.12.2-2_armel.deb ...
Unpacking libisl10:armel (0.12.2-2) ...
Selecting previously unselected package libcloog-isl4:armel.
Preparing to unpack .../libcloog-isl4_0.18.2-1+b2_armel.deb ...
Unpacking libcloog-isl4:armel (0.18.2-1+b2) ...
Preparing to unpack .../libcurl3-gnutls_7.38.0-4_armel.deb ...
Unpacking libcurl3-gnutls:armel (7.38.0-4) over (7.26.0-1+wheezy12) ...
Preparing to unpack .../libdaemon0_0.14-6_armel.deb ...
Unpacking libdaemon0:armel (0.14-6) over (0.14-2) ...
Selecting previously unselected package libdatrie1:armel.
Preparing to unpack .../libdatrie1_0.2.8-1_armel.deb ...
Unpacking libdatrie1:armel (0.2.8-1) ...
Selecting previously unselected package libisc-export95.
Preparing to unpack .../libisc-export95_1%3a9.9.5.dfsg-9_armel.deb ...
Unpacking libisc-export95 (1:9.9.5.dfsg-9) ...
Selecting previously unselected package libdns-export100.
Preparing to unpack .../libdns-export100_1%3a9.9.5.dfsg-9_armel.deb ...
Unpacking libdns-export100 (1:9.9.5.dfsg-9) ...
Selecting previously unselected package libfftw3-double3:armel.
Preparing to unpack .../libfftw3-double3_3.3.4-2_armel.deb ...
Unpacking libfftw3-double3:armel (3.3.4-2) ...
Preparing to unpack .../fuse_2.9.3-15+b1_armel.deb ...
Unpacking fuse (2.9.3-15+b1) over (2.9.0-2+deb7u1) ...
Preparing to unpack .../libfuse2_2.9.3-15+b1_armel.deb ...
Unpacking libfuse2:armel (2.9.3-15+b1) over (2.9.0-2+deb7u1) ...
Preparing to unpack .../libjasper1_1.900.1-debian1-2.4_armel.deb ...
Unpacking libjasper1:armel (1.900.1-debian1-2.4) over (1.900.1-13+deb7u3) ...
Selecting previously unselected package libgdk-pixbuf2.0-common.
Preparing to unpack .../libgdk-pixbuf2.0-common_2.31.1-2_all.deb ...
Unpacking libgdk-pixbuf2.0-common (2.31.1-2) ...
Selecting previously unselected package libgdk-pixbuf2.0-0:armel.
Preparing to unpack .../libgdk-pixbuf2.0-0_2.31.1-2+b1_armel.deb ...
Unpacking libgdk-pixbuf2.0-0:armel (2.31.1-2+b1) ...
Selecting previously unselected package libgtk2.0-common.
Preparing to unpack .../libgtk2.0-common_2.24.25-3_all.deb ...
Unpacking libgtk2.0-common (2.24.25-3) ...
Selecting previously unselected package libthai-data.
Preparing to unpack .../libthai-data_0.1.21-1_all.deb ...
Unpacking libthai-data (0.1.21-1) ...
Selecting previously unselected package libthai0:armel.
Preparing to unpack .../libthai0_0.1.21-1_armel.deb ...
Unpacking libthai0:armel (0.1.21-1) ...
Selecting previously unselected package libpango-1.0-0:armel.
Preparing to unpack .../libpango-1.0-0_1.36.8-3_armel.deb ...
Unpacking libpango-1.0-0:armel (1.36.8-3) ...
Selecting previously unselected package libgraphite2-3:armel.
Preparing to unpack .../libgraphite2-3_1.2.4-3_armel.deb ...
Unpacking libgraphite2-3:armel (1.2.4-3) ...
Selecting previously unselected package libharfbuzz0b:armel.
Preparing to unpack .../libharfbuzz0b_0.9.35-2_armel.deb ...
Unpacking libharfbuzz0b:armel (0.9.35-2) ...
Selecting previously unselected package libpangoft2-1.0-0:armel.
Preparing to unpack .../libpangoft2-1.0-0_1.36.8-3_armel.deb ...
Unpacking libpangoft2-1.0-0:armel (1.36.8-3) ...
Selecting previously unselected package libpangocairo-1.0-0:armel.
Preparing to unpack .../libpangocairo-1.0-0_1.36.8-3_armel.deb ...
Unpacking libpangocairo-1.0-0:armel (1.36.8-3) ...
Selecting previously unselected package libxcomposite1:armel.
Preparing to unpack .../libxcomposite1_1%3a0.4.4-1_armel.deb ...
Unpacking libxcomposite1:armel (1:0.4.4-1) ...
Selecting previously unselected package libxfixes3:armel.
Preparing to unpack .../libxfixes3_1%3a5.0.1-2+b2_armel.deb ...
Unpacking libxfixes3:armel (1:5.0.1-2+b2) ...
Selecting previously unselected package libxcursor1:armel.
Preparing to unpack .../libxcursor1_1%3a1.1.14-1+b1_armel.deb ...
Unpacking libxcursor1:armel (1:1.1.14-1+b1) ...
Selecting previously unselected package libxdamage1:armel.
Preparing to unpack .../libxdamage1_1%3a1.1.4-2+b1_armel.deb ...
Unpacking libxdamage1:armel (1:1.1.4-2+b1) ...
Selecting previously unselected package libxi6:armel.
Preparing to unpack .../libxi6_2%3a1.7.4-1+b2_armel.deb ...
Unpacking libxi6:armel (2:1.7.4-1+b2) ...
Selecting previously unselected package libxinerama1:armel.
Preparing to unpack .../libxinerama1_2%3a1.1.3-1+b1_armel.deb ...
Unpacking libxinerama1:armel (2:1.1.3-1+b1) ...
Selecting previously unselected package libxrandr2:armel.
Preparing to unpack .../libxrandr2_2%3a1.4.2-1+b1_armel.deb ...
Unpacking libxrandr2:armel (2:1.4.2-1+b1) ...
Preparing to unpack .../shared-mime-info_1.3-1_armel.deb ...
Unpacking shared-mime-info (1.3-1) over (1.0-1+b1) ...
Selecting previously unselected package libgtk2.0-0:armel.
Preparing to unpack .../libgtk2.0-0_2.24.25-3_armel.deb ...
Unpacking libgtk2.0-0:armel (2.24.25-3) ...
Selecting previously unselected package pinentry-gtk2.
Preparing to unpack .../pinentry-gtk2_0.8.3-2_armel.deb ...
Unpacking pinentry-gtk2 (0.8.3-2) ...
Preparing to unpack .../libpth20_2.0.7-20_armel.deb ...
Unpacking libpth20:armel (2.0.7-20) over (2.0.7-16) ...
Selecting previously unselected package gnupg-agent.
Preparing to unpack .../gnupg-agent_2.0.26-6_armel.deb ...
Unpacking gnupg-agent (2.0.26-6) ...
Selecting previously unselected package libksba8:armel.
Preparing to unpack .../libksba8_1.3.2-1_armel.deb ...
Unpacking libksba8:armel (1.3.2-1) ...
Selecting previously unselected package gnupg2.
Preparing to unpack .../gnupg2_2.0.26-6_armel.deb ...
Unpacking gnupg2 (2.0.26-6) ...
Preparing to unpack .../libgpgme11_1.5.1-6_armel.deb ...
Unpacking libgpgme11:armel (1.5.1-6) over (1.2.0-1.4+deb7u1) ...
Selecting previously unselected package libhcrypto4-heimdal:armel.
Preparing to unpack .../libhcrypto4-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libhcrypto4-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libheimbase1-heimdal:armel.
Preparing to unpack .../libheimbase1-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libheimbase1-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libwind0-heimdal:armel.
Preparing to unpack .../libwind0-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libwind0-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libhx509-5-heimdal:armel.
Preparing to unpack .../libhx509-5-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libhx509-5-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libkrb5-26-heimdal:armel.
Preparing to unpack .../libkrb5-26-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libkrb5-26-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libheimntlm0-heimdal:armel.
Preparing to unpack .../libheimntlm0-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libheimntlm0-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libgssapi3-heimdal:armel.
Preparing to unpack .../libgssapi3-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libgssapi3-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libhdb9-heimdal:armel.
Preparing to unpack .../libhdb9-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libhdb9-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libicu52:armel.
Preparing to unpack .../libicu52_52.1-8_armel.deb ...
Unpacking libicu52:armel (52.1-8) ...
Selecting previously unselected package libisccfg-export90.
Preparing to unpack .../libisccfg-export90_1%3a9.9.5.dfsg-9_armel.deb ...
Unpacking libisccfg-export90 (1:9.9.5.dfsg-9) ...
Selecting previously unselected package libirs-export91.
Preparing to unpack .../libirs-export91_1%3a9.9.5.dfsg-9_armel.deb ...
Unpacking libirs-export91 (1:9.9.5.dfsg-9) ...
Selecting previously unselected package libtevent0:armel.
Preparing to unpack .../libtevent0_0.9.21-1_armel.deb ...
Unpacking libtevent0:armel (0.9.21-1) ...
Selecting previously unselected package libldb1:armel.
Preparing to unpack .../libldb1_2%3a1.1.17-2_armel.deb ...
Unpacking libldb1:armel (2:1.1.17-2) ...
Selecting previously unselected package liblua5.2-0:armel.
Preparing to unpack .../liblua5.2-0_5.2.3-1.1_armel.deb ...
Unpacking liblua5.2-0:armel (5.2.3-1.1) ...
Selecting previously unselected package libmagickcore-6.q16-2:armel.
Preparing to unpack .../libmagickcore-6.q16-2_8%3a6.8.9.9-5_armel.deb ...
Unpacking libmagickcore-6.q16-2:armel (8:6.8.9.9-5) ...
Selecting previously unselected package libmagickwand-6.q16-2:armel.
Preparing to unpack .../libmagickwand-6.q16-2_8%3a6.8.9.9-5_armel.deb ...
Unpacking libmagickwand-6.q16-2:armel (8:6.8.9.9-5) ...
Preparing to unpack .../libmms0_0.6.2-4_armel.deb ...
Unpacking libmms0:armel (0.6.2-4) over (0.6.2-3+deb7u1) ...
Selecting previously unselected package libnl-3-200:armel.
Preparing to unpack .../libnl-3-200_3.2.24-2_armel.deb ...
Unpacking libnl-3-200:armel (3.2.24-2) ...
Selecting previously unselected package libnl-genl-3-200:armel.
Preparing to unpack .../libnl-genl-3-200_3.2.24-2_armel.deb ...
Unpacking libnl-genl-3-200:armel (3.2.24-2) ...
Preparing to unpack .../libnspr4_2%3a4.10.7-1_armel.deb ...
Unpacking libnspr4:armel (2:4.10.7-1) over (2:4.9.2-1+deb7u2) ...
Selecting previously unselected package libntdb1:armel.
Preparing to unpack .../libntdb1_1.0-5_armel.deb ...
Unpacking libntdb1:armel (1.0-5) ...
Preparing to unpack .../libpaper1_1.1.24+nmu4_armel.deb ...
Unpacking libpaper1:armel (1.1.24+nmu4) over (1.1.24+nmu2) ...
Selecting previously unselected package libparted2:armel.
Preparing to unpack .../libparted2_3.2-7_armel.deb ...
Unpacking libparted2:armel (3.2-7) ...
Selecting previously unselected package libpython2.7:armel.
Preparing to unpack .../libpython2.7_2.7.9-2_armel.deb ...
Unpacking libpython2.7:armel (2.7.9-2) ...
Selecting previously unselected package libserf-1-1:armel.
Preparing to unpack .../libserf-1-1_1.3.8-1_armel.deb ...
Unpacking libserf-1-1:armel (1.3.8-1) ...
Selecting previously unselected package libsigsegv2:armel.
Preparing to unpack .../libsigsegv2_2.10-4+b1_armel.deb ...
Unpacking libsigsegv2:armel (2.10-4+b1) ...
Selecting previously unselected package python-dnspython.
Preparing to unpack .../python-dnspython_1.12.0-1_all.deb ...
Unpacking python-dnspython (1.12.0-1) ...
Selecting previously unselected package python-ntdb.
Preparing to unpack .../python-ntdb_1.0-5_armel.deb ...
Unpacking python-ntdb (1.0-5) ...
Selecting previously unselected package python-ldb.
Preparing to unpack .../python-ldb_2%3a1.1.17-2_armel.deb ...
Unpacking python-ldb (2:1.1.17-2) ...
Selecting previously unselected package python-tdb.
Preparing to unpack .../python-tdb_1.3.1-1_armel.deb ...
Unpacking python-tdb (1.3.1-1) ...
Selecting previously unselected package python-crypto.
Preparing to unpack .../python-crypto_2.6.1-5+b2_armel.deb ...
Unpacking python-crypto (2.6.1-5+b2) ...
Selecting previously unselected package python-talloc.
Preparing to unpack .../python-talloc_2.1.1-2_armel.deb ...
Unpacking python-talloc (2.1.1-2) ...
Preparing to unpack .../libwbclient0_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking libwbclient0:armel (2:4.1.17+dfsg-2) over (2:3.6.6-6+deb7u5) ...
Preparing to unpack .../samba_2%3a4.1.17+dfsg-2_armel.deb ...
[ ok ] Stopping Samba daemons: nmbd smbd.
Unpacking samba (2:4.1.17+dfsg-2) over (2:3.6.6-6+deb7u5) ...
Selecting previously unselected package samba-libs:armel.
Preparing to unpack .../samba-libs_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking samba-libs:armel (2:4.1.17+dfsg-2) ...
Selecting previously unselected package python-samba.
Preparing to unpack .../python-samba_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking python-samba (2:4.1.17+dfsg-2) ...
Preparing to unpack .../smbclient_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking smbclient (2:4.1.17+dfsg-2) over (2:3.6.6-6+deb7u5) ...
Preparing to unpack .../samba-common_2%3a4.1.17+dfsg-2_all.deb ...
Unpacking samba-common (2:4.1.17+dfsg-2) over (2:3.6.6-6+deb7u5) ...
dpkg: warning: unable to delete old directory '/etc/dhcp3/dhclient-enter-hooks.d': Directory not empty
dpkg: warning: unable to delete old directory '/etc/dhcp3': Directory not empty
Selecting previously unselected package samba-common-bin.
Preparing to unpack .../samba-common-bin_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking samba-common-bin (2:4.1.17+dfsg-2) ...
Selecting previously unselected package samba-dsdb-modules.
Preparing to unpack .../samba-dsdb-modules_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking samba-dsdb-modules (2:4.1.17+dfsg-2) ...
Selecting previously unselected package tdb-tools.
Preparing to unpack .../tdb-tools_1.3.1-1_armel.deb ...
Unpacking tdb-tools (1.3.1-1) ...
Selecting previously unselected package libkdc2-heimdal:armel.
Preparing to unpack .../libkdc2-heimdal_1.6~rc2+dfsg-9_armel.deb ...
Unpacking libkdc2-heimdal:armel (1.6~rc2+dfsg-9) ...
Selecting previously unselected package libsmbclient:armel.
Preparing to unpack .../libsmbclient_2%3a4.1.17+dfsg-2_armel.deb ...
Unpacking libsmbclient:armel (2:4.1.17+dfsg-2) ...
Preparing to unpack .../subversion_1.8.10-5_armel.deb ...
Unpacking subversion (1.8.10-5) over (1.6.17dfsg-4+deb7u8) ...
dpkg: warning: unable to delete old directory '/etc/emacs/site-start.d': Directory not empty
dpkg: warning: unable to delete old directory '/etc/emacs': Directory not empty
Preparing to unpack .../libsvn1_1.8.10-5_armel.deb ...
Unpacking libsvn1:armel (1.8.10-5) over (1.6.17dfsg-4+deb7u8) ...
Selecting previously unselected package libubsan0:armel.
Preparing to unpack .../libubsan0_4.9.2-10_armel.deb ...
Unpacking libubsan0:armel (4.9.2-10) ...
Preparing to unpack .../libusb-1.0-0_2%3a1.0.19-1_armel.deb ...
Unpacking libusb-1.0-0:armel (2:1.0.19-1) over (2:1.0.11-1) ...
Preparing to unpack .../libvorbisenc2_1.3.4-2_armel.deb ...
Unpacking libvorbisenc2:armel (1.3.4-2) over (1.3.2-1.3) ...
Preparing to unpack .../libvorbis0a_1.3.4-2_armel.deb ...
Unpacking libvorbis0a:armel (1.3.4-2) over (1.3.2-1.3) ...
Preparing to unpack .../libc-ares2_1.10.0-2_armel.deb ...
Unpacking libc-ares2:armel (1.10.0-2) over (1.9.1-3) ...
Selecting previously unselected package libwsutil4:armel.
Preparing to unpack .../libwsutil4_1.12.1+g01b65bf-4_armel.deb ...
Unpacking libwsutil4:armel (1.12.1+g01b65bf-4) ...
Selecting previously unselected package libwiretap4:armel.
Preparing to unpack .../libwiretap4_1.12.1+g01b65bf-4_armel.deb ...
Unpacking libwiretap4:armel (1.12.1+g01b65bf-4) ...
Selecting previously unselected package libwireshark5:armel.
Preparing to unpack .../libwireshark5_1.12.1+g01b65bf-4_armel.deb ...
Unpacking libwireshark5:armel (1.12.1+g01b65bf-4) ...
Preparing to unpack .../module-init-tools_18-3_all.deb ...
Unpacking module-init-tools (18-3) over (9-3) ...
Selecting previously unselected package linux-image-3.16.0-4-kirkwood.
Preparing to unpack .../linux-image-3.16.0-4-kirkwood_3.16.7-ckt7-1_armel.deb ...
Unpacking linux-image-3.16.0-4-kirkwood (3.16.7-ckt7-1) ...
Processing triggers for initramfs-tools (0.119) ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Can't find /boot/vmlinuz-3.16.0-4-kirkwood or /boot/initrd.img-3.16.0-4-kirkwood
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing package initramfs-tools (--unpack):
subprocess installed post-installation script returned error exit status 1
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Errors were encountered while processing:
initramfs-tools
Log ended: 2015-04-01 18:20:52
Log started: 2015-04-01 18:22:05
Selecting previously unselected package libperl4-corelibs-perl.
(Reading database ... 56874 files and directories currently installed.)
Preparing to unpack .../libperl4-corelibs-perl_0.003-1_all.deb ...
Unpacking libperl4-corelibs-perl (0.003-1) ...
Setting up init-system-helpers (1.22) ...
Setting up cron (3.0pl1-127) ...
Installing new version of config file /etc/init.d/cron ...
Installing new version of config file /etc/pam.d/cron ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
[ ok ] Starting periodic command scheduler: cron.
Setting up libboost-iostreams1.55.0:armel (1.55.0+dfsg-3) ...
Setting up libestr0 (0.1.9-1.1) ...
Setting up libjson-c2:armel (0.11-4) ...
Setting up liblogging-stdlog0:armel (1.0.4-1) ...
Setting up liblognorm1:armel (1.0.1-3) ...
Setting up libnewt0.52:armel (0.52.17-1+b1) ...
Setting up libpipeline1:armel (1.4.0-1) ...
Setting up libpopt0:armel (1.16-10) ...
Setting up man-db (2.7.0.2-5) ...
Installing new version of config file /etc/cron.daily/man-db ...
Installing new version of config file /etc/cron.weekly/man-db ...
Building database of manual pages ...
Setting up liblocale-gettext-perl (1.05-8+b1) ...
Setting up libasprintf0c2:armel (0.19.3-2) ...
Setting up libcwidget3:armel (0.5.17-2) ...
Setting up libedit2:armel (3.1-20140620-2) ...
Setting up libevent-2.0-5:armel (2.0.21-stable-2) ...
Setting up libnettle4:armel (2.7.1-5) ...
Setting up libhogweed2:armel (2.7.1-5) ...
Setting up libffi6:armel (3.1-2+b2) ...
Setting up libp11-kit0:armel (0.20.7-1) ...
Setting up libtasn1-6:armel (4.2-2) ...
Setting up libgnutls-deb0-28:armel (3.3.8-6) ...
Setting up libgnutls-openssl27:armel (3.3.8-6) ...
Setting up libkrb5support0:armel (1.12.1+dfsg-19) ...
Setting up libk5crypto3:armel (1.12.1+dfsg-19) ...
Setting up libkrb5-3:armel (1.12.1+dfsg-19) ...
Setting up libgssapi-krb5-2:armel (1.12.1+dfsg-19) ...
Setting up libgssrpc4:armel (1.12.1+dfsg-19) ...
Setting up libkadm5clnt-mit9:armel (1.12.1+dfsg-19) ...
Setting up libkdb5-7:armel (1.12.1+dfsg-19) ...
Setting up libkadm5srv-mit9:armel (1.12.1+dfsg-19) ...
Setting up libsasl2-modules-db:armel (2.1.26.dfsg1-13) ...
Setting up libsasl2-2:armel (2.1.26.dfsg1-13) ...
Setting up libldap-2.4-2:armel (2.4.40-4) ...
Setting up libmagic1:armel (1:5.22+15-2) ...
Setting up librpcsecgss3:armel (0.19-7) ...
Setting up libtirpc1:armel (0.2.5-1) ...
Setting up libxml2:armel (2.9.1+dfsg1-5) ...
Setting up perl-modules (5.20.2-2) ...
Setting up perl (5.20.2-2) ...
Setting up libpython2.7-stdlib:armel (2.7.9-2) ...
Setting up python2.7 (2.7.9-2) ...
Setting up libpython-stdlib:armel (2.7.9-1) ...
Setting up python (2.7.9-1) ...
Setting up libapr1:armel (1.5.1-3) ...
Setting up libaprutil1:armel (1.5.4-1) ...
Setting up libaprutil1-dbd-sqlite3:armel (1.5.4-1) ...
Setting up libaprutil1-ldap:armel (1.5.4-1) ...
Setting up apache2-bin (2.4.10-10) ...
Setting up apache2-utils (2.4.10-10) ...
Setting up apache2-data (2.4.10-10) ...
Setting up apache2 (2.4.10-10) ...
Installing new version of config file /etc/apache2/apache2.conf ...
Installing new version of config file /etc/apache2/envvars ...
Installing new version of config file /etc/apache2/mods-available/actions.conf ...
Installing new version of config file /etc/apache2/mods-available/alias.conf ...
Installing new version of config file /etc/apache2/mods-available/asis.load ...
Installing new version of config file /etc/apache2/mods-available/auth_basic.load ...
Installing new version of config file /etc/apache2/mods-available/auth_digest.load ...
Installing new version of config file /etc/apache2/mods-available/authz_dbm.load ...
Installing new version of config file /etc/apache2/mods-available/authz_groupfile.load ...
Installing new version of config file /etc/apache2/mods-available/authz_host.load ...
Installing new version of config file /etc/apache2/mods-available/authz_user.load ...
Installing new version of config file /etc/apache2/mods-available/autoindex.conf ...
Installing new version of config file /etc/apache2/mods-available/cgid.conf ...
Installing new version of config file /etc/apache2/mods-available/dav_fs.conf ...
Installing new version of config file /etc/apache2/mods-available/deflate.conf ...
Installing new version of config file /etc/apache2/mods-available/deflate.load ...
Installing new version of config file /etc/apache2/mods-available/dir.conf ...
Installing new version of config file /etc/apache2/mods-available/include.load ...
Installing new version of config file /etc/apache2/mods-available/info.conf ...
Installing new version of config file /etc/apache2/mods-available/ldap.conf ...
Installing new version of config file /etc/apache2/mods-available/mime.conf ...
Installing new version of config file /etc/apache2/mods-available/mime_magic.conf ...
Installing new version of config file /etc/apache2/mods-available/negotiation.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy_balancer.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy_balancer.load ...
Installing new version of config file /etc/apache2/mods-available/proxy_ftp.conf ...
Installing new version of config file /etc/apache2/mods-available/reqtimeout.conf ...
Installing new version of config file /etc/apache2/mods-available/setenvif.conf ...
Installing new version of config file /etc/apache2/mods-available/ssl.conf ...
Installing new version of config file /etc/apache2/mods-available/ssl.load ...
Installing new version of config file /etc/apache2/mods-available/status.conf ...
Installing new version of config file /etc/apache2/mods-available/userdir.conf ...
Configuration file '/etc/apache2/ports.conf'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** ports.conf (Y/I/N/O/D/Z) [default=N] ? D
Configuration file '/etc/apache2/ports.conf'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** ports.conf (Y/I/N/O/D/Z) [default=N] ? D
Configuration file '/etc/apache2/ports.conf'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** ports.conf (Y/I/N/O/D/Z) [default=N] ? I
Installing new version of config file /etc/apache2/ports.conf ...
Installing new version of config file /etc/cron.daily/apache2 ...
Installing new version of config file /etc/default/apache2 ...
Installing new version of config file /etc/init.d/apache2 ...
Installing new version of config file /etc/logrotate.d/apache2 ...
Removing obsolete conffile /etc/apache2/mods-available/authz_default.load ...
Removing obsolete conffile /etc/apache2/mods-available/authn_default.load ...
Removing obsolete conffile /etc/apache2/mods-available/mem_cache.load ...
Removing obsolete conffile /etc/apache2/mods-available/mem_cache.conf ...
Removing obsolete conffile /etc/apache2/mods-available/authn_alias.load ...
Removing obsolete conffile /etc/apache2/mods-available/cern_meta.load ...
Removing obsolete conffile /etc/apache2/mods-available/disk_cache.load ...
Removing obsolete conffile /etc/apache2/mods-available/disk_cache.conf ...
Removing obsolete conffile /etc/apache2/mods-available/imagemap.load ...
Preserving user changes to /etc/bash_completion.d/apache2 (renamed from /etc/bash_completion.d/apache2.2-common)...
Preserving user changes to /etc/apache2/sites-available/000-default.conf (renamed from /etc/apache2/sites-available/default)...
Preserving user changes to /etc/apache2/sites-available/default-ssl.conf (renamed from /etc/apache2/sites-available/default-ssl)...
Preserving user changes to /etc/apache2/conf-available/charset.conf (renamed from /etc/apache2/conf.d/charset)...
Preserving user changes to /etc/apache2/conf-available/localized-error-pages.conf (renamed from /etc/apache2/conf.d/localized-error-pages)...
Preserving user changes to /etc/apache2/conf-available/other-vhosts-access-log.conf (renamed from /etc/apache2/conf.d/other-vhosts-access-log)...
Preserving user changes to /etc/apache2/conf-available/security.conf (renamed from /etc/apache2/conf.d/security)...
Directory /etc/apache2/conf.d is not empty - leaving as is
Please note, that directory is considered obsolete and not read anymore by default
security.dpkg-dist
Enabling module mpm_prefork.
Enabling module authn_core.
disable obsolete module authz_default
Enabling module authz_core.
AH00526: Syntax error on line 9 of /etc/apache2/mods-enabled/php5.conf:
Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration
Enabling module filter.
Enabling module access_compat.
Enabling conf charset.
Enabling conf localized-error-pages.
Enabling conf other-vhosts-access-log.
Enabling conf security.
Enabling conf serve-cgi-bin.
[ ok ] Starting web server: apache2.
Setting up fonts-dejavu-core (2.34-1) ...
Setting up fontconfig-config (2.11.0-6.3) ...
Installing new version of config file /etc/fonts/conf.d/README ...
Installing new version of config file /etc/fonts/fonts.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-autohint.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-no-sub-pixel.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-sub-pixel-bgr.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-sub-pixel-rgb.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-sub-pixel-vbgr.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-sub-pixel-vrgb.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/10-unhinted.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/11-lcdfilter-default.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/11-lcdfilter-legacy.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/11-lcdfilter-light.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/20-fix-globaladvance.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/20-unhint-small-vera.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/25-unhint-nonlatin.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/30-metric-aliases.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/30-urw-aliases.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/40-nonlatin.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/45-latin.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/49-sansserif.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/50-user.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/51-local.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/60-latin.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/65-fonts-persian.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/65-khmer.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/65-nonlatin.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/69-unifont.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/70-force-bitmaps.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/70-no-bitmaps.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/70-yes-bitmaps.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/80-delicious.conf ...
Removing obsolete conffile /etc/fonts/conf.avail/90-synthetic.conf ...
Removing obsolete conffile /etc/fonts/fonts.dtd ...
Setting up libfontconfig1:armel (2.11.0-6.3) ...
Setting up fontconfig (2.11.0-6.3) ...
Regenerating fonts cache... done.
Setting up libasan1:armel (4.9.2-10) ...
Setting up libroken18-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libasn1-8-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libassuan0:armel (2.1.2-2) ...
Setting up libglib2.0-0:armel (2.42.1-1) ...
No schema files found: doing nothing.
Setting up libatk1.0-data (2.14.0-1) ...
Setting up libatk1.0-0:armel (2.14.0-1) ...
Setting up libatomic1:armel (4.9.2-10) ...
Setting up libavahi-core7:armel (0.6.31-4+b2) ...
Setting up libboost-system1.55.0:armel (1.55.0+dfsg-3) ...
Setting up libboost-filesystem1.55.0:armel (1.55.0+dfsg-3) ...
Setting up libboost-serialization1.55.0:armel (1.55.0+dfsg-3) ...
Setting up libpixman-1-0:armel (0.32.6-3) ...
Setting up libx11-6:armel (2:1.6.2-3) ...
Setting up libxcb-render0:armel (1.10-3+b1) ...
Setting up libxcb-shm0:armel (1.10-3+b1) ...
Setting up libxext6:armel (2:1.3.3-1) ...
Setting up libxrender1:armel (1:0.9.8-1+b1) ...
Setting up libcairo2:armel (1.14.0-2.1) ...
Setting up libisl10:armel (0.12.2-2) ...
Setting up libcloog-isl4:armel (0.18.2-1+b2) ...
Setting up libcups2:armel (1.7.5-11) ...
Setting up libdbus-1-3:armel (1.8.16-1) ...
Setting up libjpeg62-turbo:armel (1:1.3.1-12) ...
Setting up libtiff5:armel (4.0.3-12.3) ...
Setting up librtmp1:armel (1:2.4+20130918.git79459a2-dmo6) ...
Setting up libssh2-1:armel (1.4.3-4.1) ...
Setting up libcurl3:armel (7.38.0-4) ...
Setting up libcurl3-gnutls:armel (7.38.0-4) ...
Setting up libdaemon0:armel (0.14-6) ...
Setting up libdatrie1:armel (0.2.8-1) ...
Setting up libisc-export95 (1:9.9.5.dfsg-9) ...
Setting up libdns-export100 (1:9.9.5.dfsg-9) ...
Setting up libgomp1:armel (4.9.2-10) ...
Setting up libfftw3-double3:armel (3.3.4-2) ...
Setting up libfuse2:armel (2.9.3-15+b1) ...
Setting up libvpx1:armel (1.3.0-3) ...
Setting up libgd3:armel (2.1.0-5) ...
Setting up libgdk-pixbuf2.0-common (2.31.1-2) ...
Setting up libjasper1:armel (1.900.1-debian1-2.4) ...
Setting up libgdk-pixbuf2.0-0:armel (2.31.1-2+b1) ...
Setting up libgettextpo0:armel (0.19.3-2) ...
Setting up libgfortran3:armel (4.9.2-10) ...
Setting up libgtk2.0-common (2.24.25-3) ...
Setting up libthai-data (0.1.21-1) ...
Setting up libthai0:armel (0.1.21-1) ...
Setting up libpango-1.0-0:armel (1.36.8-3) ...
Setting up libgraphite2-3:armel (1.2.4-3) ...
Setting up libharfbuzz0b:armel (0.9.35-2) ...
Setting up libpangoft2-1.0-0:armel (1.36.8-3) ...
Setting up libpangocairo-1.0-0:armel (1.36.8-3) ...
Setting up libxcomposite1:armel (1:0.4.4-1) ...
Setting up libxfixes3:armel (1:5.0.1-2+b2) ...
Setting up libxcursor1:armel (1:1.1.14-1+b1) ...
Setting up libxdamage1:armel (1:1.1.4-2+b1) ...
Setting up libxi6:armel (2:1.7.4-1+b2) ...
Setting up libxinerama1:armel (2:1.1.3-1+b1) ...
Setting up libxrandr2:armel (2:1.4.2-1+b1) ...
Setting up shared-mime-info (1.3-1) ...
Setting up libgtk2.0-0:armel (2.24.25-3) ...
Setting up pinentry-gtk2 (0.8.3-2) ...
Setting up libpth20:armel (2.0.7-20) ...
Setting up gnupg-agent (2.0.26-6) ...
Setting up libksba8:armel (1.3.2-1) ...
Setting up gnupg2 (2.0.26-6) ...
Setting up libgpgme11:armel (1.5.1-6) ...
Setting up libhcrypto4-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libheimbase1-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libwind0-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libhx509-5-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libkrb5-26-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libheimntlm0-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libgssapi3-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libhdb9-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up libicu52:armel (52.1-8) ...
Setting up libisccfg-export90 (1:9.9.5.dfsg-9) ...
Setting up libirs-export91 (1:9.9.5.dfsg-9) ...
Setting up libtevent0:armel (0.9.21-1) ...
Setting up libldb1:armel (2:1.1.17-2) ...
Setting up liblua5.2-0:armel (5.2.3-1.1) ...
Setting up libmagickcore-6.q16-2:armel (8:6.8.9.9-5) ...
Setting up libmagickwand-6.q16-2:armel (8:6.8.9.9-5) ...
Setting up libmms0:armel (0.6.2-4) ...
Setting up libmpdec2:armel (2.4.1-1) ...
Setting up libnl-3-200:armel (3.2.24-2) ...
Setting up libnl-genl-3-200:armel (3.2.24-2) ...
Setting up libnspr4:armel (2:4.10.7-1) ...
Setting up libntdb1:armel (1.0-5) ...
Setting up libpaper1:armel (1.1.24+nmu4) ...
Setting up libparted2:armel (3.2-7) ...
Setting up libpython2.7:armel (2.7.9-2) ...
Setting up libpython3.4-minimal:armel (3.4.2-1) ...
Setting up libpython3.4-stdlib:armel (3.4.2-1) ...
Setting up libserf-1-1:armel (1.3.8-1) ...
Setting up libsigsegv2:armel (2.10-4+b1) ...
Setting up libwbclient0:armel (2:4.1.17+dfsg-2) ...
Setting up python-talloc (2.1.1-2) ...
Setting up samba-libs:armel (2:4.1.17+dfsg-2) ...
Setting up libsmbclient:armel (2:4.1.17+dfsg-2) ...
Setting up libsvn1:armel (1.8.10-5) ...
Setting up libubsan0:armel (4.9.2-10) ...
Setting up libusb-1.0-0:armel (2:1.0.19-1) ...
Setting up libvorbis0a:armel (1.3.4-2) ...
Setting up libvorbisenc2:armel (1.3.4-2) ...
Setting up libc-ares2:armel (1.10.0-2) ...
Setting up libwsutil4:armel (1.12.1+g01b65bf-4) ...
Setting up libwiretap4:armel (1.12.1+g01b65bf-4) ...
Setting up libwireshark5:armel (1.12.1+g01b65bf-4) ...
Setting up libyaml-syck-perl (1.27-2+b2) ...
Setting up kmod (18-3) ...
Setting up module-init-tools (18-3) ...
Setting up initramfs-tools (0.119) ...
update-initramfs: deferring update (trigger activated)
Setting up linux-image-3.16.0-4-kirkwood (3.16.7-ckt7-1) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.16.0-4-kirkwood
flash-kernel: deferring update (trigger activated)
/etc/kernel/postinst.d/zz-flash-kernel:
flash-kernel: deferring update (trigger activated)
Setting up python-ldb (2:1.1.17-2) ...
Setting up python3.4-minimal (3.4.2-1) ...
Setting up python-dnspython (1.12.0-1) ...
Setting up python-ntdb (1.0-5) ...
Setting up python-tdb (1.3.1-1) ...
Setting up python-crypto (2.6.1-5+b2) ...
Setting up python-samba (2:4.1.17+dfsg-2) ...
Setting up samba-common (2:4.1.17+dfsg-2) ...
Setting up samba-common-bin (2:4.1.17+dfsg-2) ...
Setting up samba-dsdb-modules (2:4.1.17+dfsg-2) ...
Setting up tdb-tools (1.3.1-1) ...
update-alternatives: using /usr/bin/tdbbackup.tdbtools to provide /usr/bin/tdbbackup (tdbbackup) in auto mode
Setting up libkdc2-heimdal:armel (1.6~rc2+dfsg-9) ...
Setting up samba (2:4.1.17+dfsg-2) ...
Installing new version of config file /etc/init.d/samba ...
Installing new version of config file /etc/logrotate.d/samba ...
update-alternatives: warning: alternative /usr/bin/smbstatus.samba3 (part of link group smbstatus) doesn't exist; removing from list of alternatives
update-alternatives: warning: /etc/alternatives/smbstatus is dangling; it will be updated with best choice
[ ok ] Starting SMB/CIFS daemon: smbd.
[ ok ] Starting NetBIOS name server: nmbd.
Setting up smbclient (2:4.1.17+dfsg-2) ...
Setting up apache2.2-bin (2.4.10-10) ...
Setting up libval14:armel (2.0-1.1) ...
Setting up libtext-charwidth-perl (0.04-7+b3) ...
Setting up libtext-iconv-perl (1.7-5+b2) ...
Setting up file (1:5.22+15-2) ...
Setting up locales-all (2.19-15) ...
Setting up locales (2.19-15) ...
Installing new version of config file /etc/locale.alias ...
locales-all installed, skipping locales generation
Setting up rpcbind (0.2.1-6) ...
Installing new version of config file /etc/init.d/rpcbind ...
[ ok ] Starting rpcbind daemon....
Setting up nfs-common (1:1.2.8-9) ...
Installing new version of config file /etc/init.d/nfs-common ...
Configuration file '/etc/default/nfs-common'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** nfs-common (Y/I/N/O/D/Z) [default=N] ? D
Configuration file '/etc/default/nfs-common'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** nfs-common (Y/I/N/O/D/Z) [default=N] ? D
Configuration file '/etc/default/nfs-common'
==> File on system created by you or by a script.
==> File also in package provided by package maintainer.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** nfs-common (Y/I/N/O/D/Z) [default=N] ?
Replacing config file /etc/idmapd.conf with new version
insserv: warning: current start runlevel(s) (2 3 4 5 S) of script `nfs-common' overrides LSB defaults (S).
[ ok ] Stopping NFS common utilities: idmapd statd.
[ ok ] Starting NFS common utilities: statd idmapd.
Setting up libdpkg-perl (1.17.24) ...
Setting up patch (2.7.5-1) ...
Setting up curl (7.38.0-4) ...
Setting up libc-dev-bin (2.19-15) ...
Setting up libc6-dev:armel (2.19-15) ...
Setting up make (4.0-8.1) ...
Setting up dpkg-dev (1.17.24) ...
Setting up python3-minimal (3.4.2-2) ...
Setting up python3.4 (3.4.2-1) ...
Setting up libpython3-stdlib:armel (3.4.2-2) ...
Setting up libperl5.20 (5.20.2-2) ...
Setting up elinks-data (0.12~pre6-5) ...
Setting up elinks (0.12~pre6-5+b2) ...
Installing new version of config file /etc/elinks/elinks.conf ...
Setting up fuse (2.9.3-15+b1) ...
Installing new version of config file /etc/fuse.conf ...
update-initramfs: deferring update (trigger activated)
Setting up gettext (0.19.3-2) ...
Setting up irssi (0.8.17-1) ...
Installing new version of config file /etc/irssi.conf ...
Setting up comerr-dev (2.1-1.42.12-1.1) ...
Setting up krb5-multidev (1.12.1+dfsg-19) ...
Setting up libalgorithm-diff-xs-perl (0.04-3+b1) ...
Setting up apache2.2-common (2.4.10-10) ...
Setting up php5-common (5.6.7+dfsg-1) ...
Installing new version of config file /etc/cron.d/php5 ...
php5_invoke: Enable module pdo for apache2 SAPI
php5_invoke: Enable module pdo for cli SAPI
Creating config file /etc/php5/mods-available/opcache.ini with new version
php5_invoke: Enable module opcache for apache2 SAPI
php5_invoke: Enable module opcache for cli SAPI
Setting up php5-json (1.3.6-1) ...
php5_invoke: Enable module json for apache2 SAPI
php5_invoke: Enable module json for cli SAPI
Setting up php5-cli (5.6.7+dfsg-1) ...
Replacing config file /etc/php5/cli/php.ini with new version
Setting up libapache2-mod-php5 (5.6.7+dfsg-1) ...
Installing new version of config file /etc/apache2/mods-available/php5.conf ...
Replacing config file /etc/php5/apache2/php.ini with new version
apache2_invoke php5: already enabled
[ ok ] Restarting web server: apache2.
Setting up libcups2-dev:armel (1.7.5-11) ...
Setting up libdbus-1-dev:armel (1.8.16-1) ...
Setting up libp11-kit-dev (0.20.7-1) ...
Setting up libpam0g-dev:armel (1.1.8-3.1) ...
Setting up libtinfo-dev:armel (5.9+20140913-1+b1) ...
Setting up libreadline6-dev:armel (6.3-8+b3) ...
Setting up libreadline-dev:armel (6.3-8+b3) ...
Setting up libuuid-perl (0.05-1+b1) ...
Setting up nfs-kernel-server (1:1.2.8-9) ...
Installing new version of config file /etc/init.d/nfs-kernel-server ...
[ ok ] Stopping NFS kernel daemon: mountd nfsd.
[ ok ] Unexporting directories for NFS kernel daemon....
[ ok ] Exporting directories for NFS kernel daemon....
[ ok ] Starting NFS kernel daemon: nfsd mountd.
Setting up php5-curl (5.6.7+dfsg-1) ...
php5_invoke: Enable module curl for apache2 SAPI
php5_invoke: Enable module curl for cli SAPI
Setting up php5-gd (5.6.7+dfsg-1) ...
php5_invoke: Enable module gd for apache2 SAPI
php5_invoke: Enable module gd for cli SAPI
Setting up subversion (1.8.10-5) ...
Installing new version of config file /etc/bash_completion.d/subversion ...
Installing new version of config file /etc/subversion/config ...
Installing new version of config file /etc/subversion/servers ...
Removing obsolete conffile /etc/emacs/site-start.d/50psvn.el ...
Setting up ttf-dejavu-core (2.34-1) ...
Setting up apache2-mpm-prefork (2.4.10-10) ...
Setting up libkrb5-dev (1.12.1+dfsg-19) ...
Setting up libperl4-corelibs-perl (0.003-1) ...
Setting up libcupsfilters1:armel (1.0.61-5) ...
Setting up dh-python (1.20141111-2) ...
Setting up python3 (3.4.2-2) ...
running python rtupdate hooks for python3.4...
running python post-rtupdate hooks for python3.4...
Setting up devscripts (2.15.1) ...
Installing new version of config file /etc/bash_completion.d/devscripts.chdist ...
Installing new version of config file /etc/cowpoke.conf ...
Setting up libcupsimage2:armel (1.7.5-11) ...
Processing triggers for libc-bin (2.19-15) ...
Processing triggers for initramfs-tools (0.119) ...
update-initramfs: Generating /boot/initrd.img-3.16.0-4-kirkwood
flash-kernel: installing version 3.16.0-4-kirkwood
Generating kernel u-boot image... done.
Flashing kernel (2071952/2097152 bytes)... done.
Flashing initramfs (4398635/9437184 bytes)... done.
Processing triggers for flash-kernel (3.33) ...
flash-kernel: installing version 3.16.0-4-kirkwood
Generating kernel u-boot image... done.
Flashing kernel (2071952/2097152 bytes)... done.
Flashing initramfs (4398635/9437184 bytes)... done.
Processing triggers for libapache2-mod-php5 (5.6.7+dfsg-1) ...
Log ended: 2015-04-01 18:42:43
Reply to: