RE: PPP connection problem
On 02:07:28 Lazar Fleysher wrote:
>
>send (ATDT....)
>Serial Connection established
>Using interface ppp0
>Connect:ppp0<-->/dev/ttyS2
>LCP: timeout sending Config-Requests
>Connection terminated
>Receive serial link is not 8-bit clean
>Problem: all had bit 7 set to 0
>
>Does anyone know what the problem is?
>
One thing that can cause this is Xon/Xoff flow control
interfering with the setup of the low level link (the LCP
process itself). However, it looks like your serial port
may not be init'd correctly (not 8N1) by setserial.
Paul
>e-mail to templin@bucknell.edu .
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: