Re: parport0 has no irq.
Marius Aamodt Eriksen hat gesagt: // Marius Aamodt Eriksen wrote:
> Hi, I've set up my system for PLIP, and when I try to load the plip module, I get an error message that parport0 has no IRQ. When trying to load the module with parameters (i.e. insmod plip irq=5), the system complains that irq is an invalid parameter.
>
Don't know about plip, but I think you will have to give the parport module
an irq.
Quoting the kernel-docs:
Parport as modules
==================
If you load the parport code as a module, say
# insmod parport.o
to load the generic parport code. You then must load the
architecture-dependent code with (for example):
# insmod parport_pc.o io=0x3bc,0x378,0x278 irq=none,7,auto
to tell the parport code that you want three PC-style ports, one at
0x3bc with no IRQ, one at 0x378 using IRQ 7, and one at 0x278 with an
auto-detected IRQ. Currently, PC-style (parport_pc) and Sun Ultra/AX
(parport_ax) hardware is supported; more is in the works.
bye
--
__ __
Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______
/ __// __ /__/ __// // __ \ \/ / __ \\ ___\
/ / / ____/ / / / // ____// /\ \\ ___\\____ \
/_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\
/_/ \_\
Reply to: