On Tue, 2005-01-04 at 00:44 +0700, Muhammad Reza wrote: > Dear Lists, > > I'm stuck with compiling debian kernel-2.6.8 source at Sarge, this is > what exactly i did... > > debian:/usr/src# ln -s kernel-source-2.6.8 linux > debian:/boot# cd /usr/src/linux > debian:/usr/src/linux# cp /root/config .config > debian:/usr/src/linux#patch -p1 </root/bootsplash-3.1.6-2.6.8.diff > debian:/usr/src/linux#make menuconfig > debian:/usr/src#make-kpkg --initrd --revision=custom.1.0 kernel_image > ----sucess----- > debian:/usr/src/linux# cd ../ > debian:/usr/src# ls > kernel-image-2.6.8_custom.1.0_i386.deb kernel-patches > kernel-source-2.6.8 kernel-source-2.6.8.tar.bz2 linux > debian:/usr/src# dpkg -i kernel-image-2.6.8_custom.1.0_i386.deb > ---sucess--- > > but new compile kernel wont boot with this error... > > RAMDISK: cramfs file system found at block 0 > RAMDISK: loading 3620 block [1 disk] into ramdisk done.. > Kernel Panic:VFS:unable to mount root fs on unknown_block(3.1) > > please help me...to solved this problem.. > here is .config and menu.lst in attach.... > Since you are using a ramdisk, it would be helpful if you could post the contents of the loadmodules file on the ramdisk itself. You are most likely missing some modules needed to mount the filesystem since (3,1) is hda1. ]$ mount -o loop /boot/initrd-xxx /mnt/tmp ]$ cat /mnt/tmp/loadmodules lspci may also help. What kernel are you currently running? Any special file system stuff like RAID or SATA? -- Eric Gaumer <gaumerel@ecs.fullerton.edu>
Attachment:
signature.asc
Description: This is a digitally signed message part