Bug#557067: get-edid output
This maybe help you:
# get-edid|parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x2110 "NVidia"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
Identifier "Acer AL2216W"
VendorName "ACR"
ModelName "Acer AL2216W"
# Block type: 2:0 3:fd
HorizSync 30-82
VertRefresh 56-76
# Max dot clock (video bandwidth) 210 MHz
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:no Standby:no
Mode "1680x1050" # vfreq 60.495Hz, hfreq 65.879kHz
DotClock 147.570000
HTimings 1680 1784 1960 2240
VTimings 1050 1053 1059 1089
Flags "+HSync" "-VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
EndSection
--
.' `. | Registered Linux User #443882
|a_a | | http://counter.li.org/ .''`.
\<_)__/ +--- : :' :
/( )\ ---+ `. `'`
|\`> < /\ Registered Debian User #9 | `-
\_|=='|_/ http://debiancounter.altervista.org/ |
Reply to: