Wanna-build states: an explanation
This page tries to explain what every wanna-build state means and what will happen to a package when it's in that state. Its target audience are Debian package maintainers that try to understand why their package has, or has not, been built for a specific architecture. Also, an explanation of the different log results is given.
Finally, a flowchart version of the wanna-build states is available, but do note that it doesn't talk about everything mentioned in this document.
The wanna-build states
For every Debian-supported architecture, there's a wanna-build database installed on buildd.debian.org, with all packages and their current compilation state. There are 8 states: needs-build, building, uploaded, dep-wait, BD-Uninstallable, failed, not-for-us, and installed.
Their meaning is as follows:
- A package marked needs-build has seen an upload of
a new version by its maintainer, but for a different
architecture than the one this wanna-build database is for; as
such, it needs a rebuild. If the state is
needs-build, it has not been picked up by an
autobuilder yet, but it will be (once one is available at a
time the specific package is near the top of the list). People
a package is queued for rebuildwhen they are talking about a package in the needs-build state.
It may be interesting to note that the needs-build queue is not a FIFO queue; rather, the ordering used is based on the following criteria:
- Packages' previous compilation states; packages that have been built previously are given priority over new packages.
- priorities (packages with required priority are built before packages with extra priority)
- The section a package is in. This ordering is based on what packages are deemed more important; e.g., section games is built after section base, and section libs is built before devel.
- an asciibetical ordering on the package name.
There could be other situations where the queue order seems to be ignored; but note that they are all exceptions.
- A package is marked building from the moment an autobuilder picks it from the top of the wanna-build queue until the moment the autobuilder admin replies to the log. As packages are not picked one by one, this means a package can be (and usually is) marked building before the build has actually started; however, as buildd builds packages in its local queue on a FIFO basis, it should not take too long anymore. Also, note that the state of a package is not modified once the build is complete; only when the autobuilder admin comes around to replying to the logs.
- When a build attempt was successful, a build log is sent to
the autobuilder admin and to buildd.debian.org. The
autobuilder maintainer will then sign the .changes file which
is embedded in the build log, and send it to the
autobuilder. In reaction, the autobuilder will upload the
package and set its state to uploaded. As such, a
package in this state can be found in the incoming queue
An autobuilder will not touch a package anymore once it's state is uploaded, at least not until the next upload or until a porter manually modifies the state of a package.
- When a package fails due to missing build-time dependencies,
the autobuilder maintainer will send a mail to the
autobuilder, instructing it to remove the package sources and
to mark the package as dep-wait on the missing
build-dependencies. A package in such a state will
automatically, without human intervention, be marked
needs-build once said dependencies are available.
Originally, a package had to see a build attempt before the maintainer would manually place it in the dep-wait state. However, in august 2005 some code was added to wanna-build which will make a package move from the installed state directly to the dep-wait state, if that is appropriate.
There are two specific cases in which it may happen that a package is marked dep-wait forever; these are when a typing error happened by specifying the dep-wait dependencies (so that the package is marked dep-wait on a package that does not and will not ever exist) and when a build-time dependency is declared on a package which is marked not-for-us, or which is in the packages-arch-specific list.
As an example to the latter, consider three packages: a package foo, which exists for i386 only; a package bar, which exists for m68k only (and which roughly performs the same function); and a package baz, which can be built with one of foo or bar. Should the maintainer of the baz package forget to add bar to the Build-Depends, and should he or she add it when it is noticed that baz is dep-waiting on a non-existing foo for m68k, then the dep-wait state for m68k will have to be manually lifted by the m68k porters.
- During debconf9, Joachim Breitner had the idea of using edos-debcheck to verify build-dependency installability of packages that would otherwise go into state Needs-Build. At that point, wanna-build already had the ability to check the immediate availability of build-dependencies; but if a package couldn't be installed because it build-depends on a which depends on b which depends on c (>=1.2.3) and c is still at version 1.2.2, this would not be detected, and the build would fail early because of unavailable build-dependencies. Figuring those out was a manual process for the buildd admin, and, usually, a lengthy one at that. With the BD-Uninstallable patch, this is no longer a problem. When your package is in BD-Uninstallable, it means one of the build-dependencies is not installable (either immediately, or because part of its dependency tree is not available). Unfortunately, the BD-Uninstallable patch does not provide information about which package, exactly, is missing; please use edos-debcheck to find out. This problem will, however, solve itself once the missing dependencies are indeed available, and at that point your package will automatically move to Needs-Build again.
- If a build attempt failed, and the autobuilder maintainer
decides it is really a failure that should not be retried, a
package is marked as failed. A package will not leave
this state until a porter decides it should do so, or until a
new version is available. However, when a new version of a
package is available which was marked as failed in
the previous version, the autobuilder will ask its admin
whether or not the package should be retried; this is so that
packages which will obviously fail again will not waste buildd
time. Although failing a package before trying a build is
hardly ever the right thing to do, the option is available to
the autobuilder admin.
Note that a package will never be marked failed without human intervention.
- Certain specific packages are architecture-specific; for
instance, lilo, an i386 boot loader, should not be
rebuilt on alpha, m68k, or s390. However, wanna-build
does not look at the control file of a package when creating its
database; only at the packages' name and section, the previous
build state, and its priority. As such, by the first upload of
an architecture-specific package which should not be built on
other architectures, a build attempt is tried none the less (but
fails even before the build-time dependencies are downloaded
Since autobuilders should not waste time trying to build packages that aren't required for their architecture, there's need for a way to list packages for which even an attempt to build isn't required. The first solution to this problem was not-for-us; however, as that is difficult to maintain, not-for-us is deprecated nowadays; autobuilder maintainers should use packages-arch-specific instead, which is a list of packages specific to one or more architectures instead of a wanna-build state.
A package in not-for-us or packages-arch-specific will not leave this state automatically; if your package specifically excluded a given architecture in its control file previously, but now includes more architectures, it must be manually requeued.
If you ever find yourself in the position that you have to ask for this to happen, you can do so by asking the relevant buildd maintainer. They can be reached at $email@example.com.
- As the name suggests, a package marked installed is compiled for the architecture the wanna-build database is for. Before Woody was released, a package's state changed from uploaded to installed after the daily katie runs. With the implementation of Accepted-autobuild, however, this is no longer true; nowadays, a package goes from state uploaded to installed when it is accepted into the archive. This means that a package is usually marked installed after 15 minutes, on average.
In addition to these eight states, wanna-build also
knows two -removed states, which are really corner cases. These
two states are dep-wait-removed and
failed-removed. They relate to their respective
state as follows: when a package in state failed or
dep-wait doesn't appear in a new Packages file which is
fed to wanna-build – when it appears it has been
removed – the information about that package isn't thrown
away, as it could be that the package not appearing in the
Packages file is just a temporary glitch, or that the package is
temporarily removed for some reason (but that it will
reappear in the archive, given time). Instead, in such a case, a
package is moved to a -removed state, so that the
information on why it failed or what it's waiting for can be
retained. Should the package reappear in a following Packages file
which is fed to wanna-build, it will then be moved from
failed-removed back to failed, or from
dep-wait-removed back to dep-wait before further
It is not possible to access the wanna-build database directly; this database is installed on ftp-master.debian.org, which is a restricted host, and only autobuilders have an SSH key which allows them to access the wanna-build database of their architecture. This has been the case even before ftp-master was restricted; As wanna-build does a database-level lock when accessing, even reading, the data, you had to be in the right group (wb-<arch>) to be able to directly access a wanna-build database.
That said, you can see what state a package is in by going to the buildd stats page, except if it is in state installed (well, not unless you don't mind digging through the multi-megabytes "<arch>-all.txt" files...).
The build log results
When a package is built by sbuild (the buildd component which does the actual building), a log with the build result is sent, by mail, to the autobuilder admin and to firstname.lastname@example.org (so that it can end up at https://buildd.debian.org). The build log result can be one of successful, attempted (previously known as failed), given-back, or skipped. Note that, at the buildd log overview page, the prefix maybe- is added, because among other things, the fact that a build can be marked failed there for things that aren't really a failure has caused confusion in the past (or, the other way around, sometimes a package which apparently built successful is really broken and needs to be rebuilt).
The meaning of the log results is as follows:
- The build was successful. When the autobuilder maintainer
receives this log, he will extract the embedded
.changesfile, sign it, and send it back to the autobuilder, which will cause the package to be uploaded.
- attempted (previously: failed)
- The build exited with a non-zero exit state, indicating it probably failed. As there can be a number of reasons why a build fails, enumerating all them would be tedious, so no attempt is done here. If a package of yours is marked (maybe-)failed, you will want to read the above, and check its current wanna-build state.
- The build failed due to a temporary problem with the
autobuilder; examples include network problems, the
unavailability of the packages' source with the current
sources.list, low disk space, and others.
A package which is given-back is marked as needs-build again; as such, it will be automatically picked up by a different autobuilder once one is ready.
- In the time between the package was picked by the/an autobuilder and marked building and the build attempt, a new version for this package was uploaded, or a porter manually modified the wanna-build state for another reason. When that is done, a mail is sent to the autobuilder, which will mark the package as not to be built; sbuild sees this, and will skip the build (although a build log with this result is sent, describing the fact that this happened).
To illustrate the above, we have also provided a flowchart-version of this procedure. Again, note that it does not contain everything mentioned in this document.