Hi, I replaced the cable for a new one, and the error persists :( , the model of the hd is HD5728080PLAT20 ATA/IDE is a Hitachi Deskstar, it says 7200 rpm MLC BA111 6 CHS: 16383/16/63 And the jumpers are as 0 Master, in a number that says 16 Other configurations available on the hd with jumpers are 15, 32GB CLP and autospin disable. I'm using fsck to check the partitions, but is there a recommended livecd with tools for checking the integrity of an hd? Does it have anything related about the board being sata and the disk ata? or are there recommended hds that would not present error like those I've mentioned? Would it be simply that my hd is broken? Thanks in advance. Igor> Hi, Igor> Erik> On Tue, Apr 25, 2006 at 05:53:04PM -0500, Igor TAmara wrote: Igor> Erik> > On Deb 2.6.12 I seen on dmesg lines like : Igor> Erik> > Igor> Erik> > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Igor> Erik> > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Igor> Erik> Igor> Erik> BadCRC means cable errors. Make sure you're using an 80 pin cable and Igor> Erik> that the master device is at the end of the cable. If that's all Igor> Erik> correct, replace the cable. Igor> Erik> Igor> Igor> Initially the cable had as a second device a dvd burner, I unplugged Igor> that, and verified that the end of the cable was attached to the hd, Igor> bought a new 80 pin cable but the errors persist. Igor> Igor> lspci gives this info : Igor> Igor> 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA Igor> RAID Controller (rev 80) Igor> 0000:00:0f.1 IDE interface: VIA Technologies, Inc. Igor> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) Igor> 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 Igor> [Athlon64/Opteron] HyperTransport Technology Configuration Igor> 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 Igor> [Athlon64/Opteron] Miscellaneous Control Igor> Igor> hd related messages on dmesg are : Igor> Igor> Bootdata ok (command line is root=/dev/hda7 ro ) Igor> Kernel command line: root=/dev/hda7 ro Igor> testing NMI watchdog ... OK. Igor> ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:DMA, hdb:pio Igor> ide1: BM-DMA at 0xe708-0xe70f, BIOS settings: hdc:pio, hdd:pio Igor> hda: HDS728080PLAT20, ATA DISK drive Igor> hda: max request size: 1024KiB Igor> hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133) Igor> hda: cache flushes supported Igor> Adding 979956k swap on /dev/hda5. Priority:-1 extents:1 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #1979049 contains a Igor> hole at offset 4096 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #1979049 contains a Igor> hole at offset 8192 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #1979049 contains a Igor> hole at offset 12288 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #1979049 contains a Igor> hole at offset 16384 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #1979049 contains a Igor> hole at offset 20480 Igor> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Igor> hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Igor> EXT3-fs error (device hda7): ext3_readdir: directory #35945 contains a Igor> hole at offset 4096 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #35945 contains a Igor> hole at offset 8192 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #35945 contains a Igor> hole at offset 12288 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #35945 contains a Igor> hole at offset 16384 Igor> EXT3-fs error (device hda7): ext3_readdir: directory #35945 contains a Igor> hole at offset 20480 Igor> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Igor> hda: dma_intr: error=0x84 { DriveStatusError BadCRC } Igor> Igor> I found that the hard disk has many jumpers, I'll see at the bios, and Igor> the info printed over the hard disk to see if the jumpers maybe are Igor> misconfigured with this info. Igor> Igor> Erik> Igor> Erik> Erik Igor> Erik> Igor> Igor> Thanks :) Igor> Igor> Erik> -- Igor> Erik> +-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 -- Igor> Erik> | Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands Igor> Erik> Igor> Igor> -- Igor> Recomiendo programas para afianzar operaciones básicas Igor> http://www.ofset.org/gcompris -- Recomiendo Python como lenguaje de programación http://www.python.org
Attachment:
signature.asc
Description: Digital signature