Re: is debian debootstrap arch dependent ? or broken
On Mon, 19 May 2014 08:33:07 -0400
"Lennart Sorensen" <lsorense@csclub.uwaterloo.ca> wrote:
> On Mon, May 19, 2014 at 09:54:38AM +0100, RichardBown wrote:
> > On Sun, 18 May 2014 19:55:11 -0400
> > "Lennart Sorensen" <lsorense@csclub.uwaterloo.ca> wrote:
> >
> > > On Mon, May 19, 2014 at 12:49:44AM +0100, RichardBown wrote:
> > > > On Sun, 18 May 2014 19:44:22 -0400
> > > > "Lennart Sorensen" <lsorense@csclub.uwaterloo.ca> wrote:
> > > >
> > > > > On Mon, May 19, 2014 at 12:24:33AM +0100, RichardBown wrote:
> > > > > > Hi
> > > > > >
> > > > > > As the squeeze version of debootstrap is sitting in the
> > > > > > flash and cant be over written
> > > > > > I've edited the kirwood.debian-wheezy.sh
> > > > > >
> > > > > > DEB_MIRROR="http://cdn.debian.net/debian";
> > > > > >
> > > > > > MKE2FS_URL="$MIRROR/debian/mke2fs"
> > > > > > PKGDETAILS_URL="$MIRROR/debian/pkgdetails"
> > > > > > URL_UBOOT="http://projects.doozan.com/uboot/install_uboot_mtd0.sh";
> > > > > > #DEBOOTSTRAP_VERSION=$(wget -q
> > > > > > "$DEB_MIRROR/pool/main/d/debootstrap/?C=M;O=D" -O- | grep -o
> > > > > > 'debootstrap[^"]*all.deb' | head -n1)
> > > > > > #DEBOOTSTRAP_VERSION=$(wget -q
> > > > > > "$DEB_MIRROR/pool/main/d/debootstrap/?C=M;O=D" -O- | grep -v
> > > > > > squeeze | grep -o 'debootstrap[^"]*all.deb' | head -n1 )
> > > > > > #URL_DEBOOTSTRAP="$DEB_MIRROR/pool/main/d/debootstrap/$DEBOOTSTRAP_VERSION"
> > > > > > URL_DEBOOTSTRAP="$DEB_MIRROR/pool/main/d/debootstrap/debootstrap_1.0.60_all.deb"
> > > > > >
> > > > > > #
> > > > > > # Download debootstrap
> > > > > > #
> > > > > > ##########
> > > > > > ##########
> > > > > >
> > > > > > #if [ ! -e /usr/sbin/debootstrap ]; then
> > > > > > mkdir /tmp/debootstrap
> > > > > > cd /tmp/debootstrap
> > > > > > wget -O debootstrap.deb $URL_DEBOOTSTRAP
> > > > > > ar xv debootstrap.deb
> > > > > > tar xzvf data.tar.gz
> > > > > >
> > > > > > if [ "$RO_ROOT" = "1" ]; then
> > > > > > mount -o remount,rw /
> > > > > > fi
> > > > > > # mv ./usr/sbin/debootstrap /usr/sbin
> > > > > > # mv ./usr/share/debootstrap /usr/share
> > > > >
> > > > > You need those two lines to extract the new version though.
> > > > >
> > > > > > install "$PKGDETAILS" "$PKGDETAILS_URL" 755
> > > > > >
> > > > > > if [ "$RO_ROOT" = "1" ]; then
> > > > > > mount -o remount,ro /
> > > > > > fi
> > > > > > #fi
> > > > >
> > > > > That should do it. Just removing the if should fix it for
> > > > > you.
> > > > >
> > > >
> > > > Thanks
> > > > nearly there, just what decompresses data.tar.xz ?
> > > >
> > > > tar doesn't like it
> > > >
> > > > Many thanks for the help so far, must get to bed
> > >
> > > Oh crap, that's a modern deb format with xz compression. Does
> > > that also happen if you leave it at using the 1.0.48 wheezy
> > > version? As far as I can tell the wheezy version is a
> > > data.tar.gz so it should work with the script, which the new
> > > debootstrap version won't.
> > >
> >
> > Yes going back to 1.0.48 allows decompression of the file.
> >
> > But then hits another problem
> >
> > ## Valid uBoot detected: [pinkpogo davygravy-2012-02-20-current]
> > ## The newest uBoot is already installed on mtd0.
> >
> > # uBoot installation has completed successfully.
> > Setting up swapspace version 1, size = 407715840 bytes
> > Connecting to cdn.debian.net (83.142.228.128:80)
> > debootstrap.deb 100% |*****************************| 60598
> > --:--:-- ETA rw-r--r-- 0/0 4 Jun 3 15:00 2013 debian-binary
> > rw-r--r-- 0/0 1190 Jun 3 15:00 2013 control.tar.gz
> > rw-r--r-- 0/0 59215 Jun 3 15:00 2013 data.tar.gz
> > ./
> > ./usr/
> > ./usr/sbin/
> > ./usr/sbin/debootstrap
> > ./usr/share/
> > ./usr/share/doc/
> > ./usr/share/doc/debootstrap/
> > ./usr/share/doc/debootstrap/README
> > ./usr/share/doc/debootstrap/copyright
> > ./usr/share/doc/debootstrap/changelog.gz
> > ./usr/share/man/
> > ./usr/share/man/man8/
> > ./usr/share/man/man8/debootstrap.8.gz
> > ./usr/share/debootstrap/
> > ./usr/share/debootstrap/scripts/
> > ./usr/share/debootstrap/scripts/sarge.buildd
> > ./usr/share/debootstrap/scripts/dapper
> > ./usr/share/debootstrap/scripts/feisty
> > ./usr/share/debootstrap/scripts/woody
> > ./usr/share/debootstrap/scripts/hoary.buildd
> > ./usr/share/debootstrap/scripts/potato
> > ./usr/share/debootstrap/scripts/warty.buildd
> > ./usr/share/debootstrap/scripts/breezy
> > ./usr/share/debootstrap/scripts/sid
> > ./usr/share/debootstrap/scripts/gutsy
> > ./usr/share/debootstrap/scripts/sarge
> > ./usr/share/debootstrap/scripts/edgy
> > ./usr/share/debootstrap/scripts/hoary
> > ./usr/share/debootstrap/scripts/warty
> > ./usr/share/debootstrap/scripts/sarge.fakechroot
> > ./usr/share/debootstrap/scripts/woody.buildd
> > ./usr/share/debootstrap/functions
> > ./usr/share/debootstrap/devices.tar.gz
> > ./usr/share/debootstrap/scripts/raring
> > ./usr/share/debootstrap/scripts/intrepid
> > ./usr/share/debootstrap/scripts/stable
> > ./usr/share/debootstrap/scripts/wheezy
> > ./usr/share/debootstrap/scripts/etch-m68k
> > ./usr/share/debootstrap/scripts/unstable
> > ./usr/share/debootstrap/scripts/oldstable
> > ./usr/share/debootstrap/scripts/jaunty
> > ./usr/share/debootstrap/scripts/lenny
> > ./usr/share/debootstrap/scripts/precise
> > ./usr/share/debootstrap/scripts/hardy
> > ./usr/share/debootstrap/scripts/maverick
> > ./usr/share/debootstrap/scripts/quantal
> > ./usr/share/debootstrap/scripts/squeeze
> > ./usr/share/debootstrap/scripts/lucid
> > ./usr/share/debootstrap/scripts/karmic
> > ./usr/share/debootstrap/scripts/jessie
> > ./usr/share/debootstrap/scripts/oneiric
> > ./usr/share/debootstrap/scripts/testing
> > ./usr/share/debootstrap/scripts/natty
> > ./usr/share/debootstrap/scripts/etch
> > mv: cannot remove '/usr/share/debootstrap': Is a directory
> > # checking for /usr/share/debootstrap/pkgdetails...
> >
> >
> > # Starting debootstrap installation
> > ./kirkwood.debian-wheezy8.sh: line 358: /tmp/bootstrap/debootstrap:
> > No such file or directory debootstrap failed.
> >
> >
> > I can see why, as it chroots, it cant see /tmp any more :(
> > I suspect the answer may be to force uboot to be reinstalled, which
> > maybe will flush out /usr/bin/. may also turn it in to a brick.
> >
> > or to add a path statement to get /tmp/bootstrap found ????
>
> Hmm, I think the cleanup before trying the script again may have to
> be:
>
> rm -rf /usr/sbin/debootstrap /usr/share/debootstrap
>
> I think it is failing to install the new debootstrap because the
> directory already exists in /usr/share and it won't overwrite it.
>
HI Len,
You are up early ,
I thing the hardware is OK, I can still plug in the USB stick with Arch
linux on it and it boots and runs.
I wish I could erase whats in the flash in both /usr/sbin and usr/share
but rm -f fails, with RO file system message.
I've rebooted several times, and checked whats there,
Strangely running the uboot installer allowed the debootstrap to be up
dated from 1.026 to 1.0.48.
I've pasted it below:_
# Version 1.1 [6/2/2012] Download files from download.doozan.com
VALID_UBOOT_MD5=http://jeff.doozan.com/uboot/valid-uboot.md5
# It is NOT a good idea to start your own mirror
# You should leave this as-is
MIRROR=http://download.doozan.com/uboot
UBOOT_MTD0_BASE_URL=$MIRROR/files/uboot/uboot.mtd0 # .platform.version.kwb will
be appended to this
UBOOT_ENV_URL=$MIRROR/files/environment/uboot.environment
BLPARAM_URL=$MIRROR/blparam
NANDDUMP_URL=$MIRROR/nanddump
NANDWRITE_URL=$MIRROR/nandwrite
FLASH_ERASE_URL=$MIRROR/flash_erase
FW_PRINTENV_URL=$MIRROR/fw_printenv
FW_CONFIG_URL=$MIRROR/fw_env.config
UBOOT_MTD0=/tmp/uboot.mtd0.kwb
UBOOT_ORIGINAL=/uboot-original-mtd0.kwb
UBOOT_ENV=/tmp/uboot.environment
BLPARAM=/usr/sbin/blparam
NANDDUMP=/usr/sbin/nanddump
NANDWRITE=/usr/sbin/nandwrite
FLASH_ERASE=/usr/sbin/flash_erase
FW_PRINTENV=/usr/sbin/fw_printenv
FW_SETENV=/usr/sbin/fw_setenv
FW_CONFIG=/etc/fw_env.config
verify_md5 ()
{
local file=$1
local md5=$2
local check_md5=$(cat "$md5" | cut -d' ' -f1)
local file_md5=$(md5sum "$file" | cut -d' ' -f1)
if [ "$check_md5" = "$file_md5" ]; then
return 0
else
return 1
fi
}
download_and_verify ()
{
local file_dest=$1
local file_url=$2
local md5_dest="$file_dest.md5"
local md5_url="$file_url.md5"
# Always download a fresh MD5, in case a newer version is available
if [ -f "$md5_dest" ]; then rm -f "$md5_dest"; fi
wget -O "$md5_dest" "$md5_url"
# retry the download if it failed
if [ ! -f "$md5_dest" ]; then
wget -O "$md5_dest" "$md5_url"
if [ ! -f "$md5_dest" ]; then
return 1 # Could not get md5
fi
fi
# If the file already exists, check the MD5
if [ -f "$file_dest" ]; then
verify_md5 "$file_dest" "$md5_dest"
if [ "$?" -ne "0" ]; then
rm -f "$md5_dest"
return 0
else
rm -f "$file_dest"
fi
fi
# Download the file
wget -O "$file_dest" "$file_url"
# retry the download if it failed
verify_md5 "$file_dest" "$md5_dest"
if [ "$?" -ne "0" ]; then
# Download failed or MD5 did not match, try again
if [ -f "$file_dest" ]; then rm -f "$file_dest"; fi
wget -O "$file_dest" "$file_url"
verify_md5 "$file_dest" "$md5_dest"
if [ "$?" -ne "0" ]; then
rm -f "$md5_dest"
return 1
fi
fi
rm -f "$md5_dest"
return 0
}
install ()
{
local file_dest=$1
local file_url=$2
local file_pmask=$3 # Permissions mask
echo "# checking for $file_dest..."
# Install target file if it doesn't already exist
if [ ! -s "$file_dest" ]; then
echo ""
echo "# Installing $file_dest..."
# Check for read-only filesystem by testing
# if we can delete the existing 0 byte file
# or, if we can create a 0 byte file
local is_readonly=0
if [ -f "$file_dest" ]; then
rm -f "$file_dest" 2> /dev/null
else
touch "$file_dest" 2> /dev/null
fi
if [ "$?" -ne "0" ]; then
local is_readonly=0
mount -o remount,rw /
fi
rm -f "$file_dest" 2> /dev/null
download_and_verify "$file_dest" "$file_url"
if [ "$?" -ne "0" ]; then
echo "## Could not install $file_dest from $file_url, exiting."
if [ "$is_readonly" = "1" ]; then
mount -o remount,ro /
fi
exit 1
fi
chmod $file_pmask "$file_dest"
chmod $file_pmask "$file_dest"
if [ "$is_readonly" = "1" ]; then
mount -o remount,ro /
fi
echo "# Successfully installed $file_dest."
fi
return 0
}
# Parse command line
for i in $*
do
case $i in
--force-platform=*)
FORCE_PLATFORM=`echo $i | sed 's/[-a-zA-Z0-9]*=//'`
echo "Forcing platform to [$FORCE_PLATFORM]"
;;
--no-uboot-check)
NO_UBOOT_CHECK=1
;;
*)
;;
esac
done
if [ "$NOPROMPT" != "1" ]; then
echo ""
echo ""
echo "!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!"
echo ""
echo "If you lose power to your device while running this script,"
echo "it could be left in an unusable state."
echo ""
echo "This script will replace the bootloader on /dev/mtd0."
echo ""
echo "This installer will only work on the following devices:"
echo " Seagate Dockstar"
echo " Seagate GoFlex Net"
echo " Seagate GoFlex Home"
echo " Pogoplug v1"
echo " Pogoplug Pink (v2)"
echo "Do not run this installer on any other device."
echo ""
echo "By typing ok, you agree to assume all liabilities and risks "
echo "associated with running this installer."
echo ""
echo -n "If you agree, type 'ok' and press ENTER to continue: "
read IS_OK
if [ "$IS_OK" != "OK" -a "$IS_OK" != "Ok" -a "$IS_OK" != "ok" ];
then
echo "Exiting. uBoot was not installed."
exit 1
fi
fi
install "$NANDWRITE" "$NANDWRITE_URL" 755
install "$NANDDUMP" "$NANDDUMP_URL" 755
install "$FLASH_ERASE" "$FLASH_ERASE_URL" 755
install "$FW_PRINTENV" "$FW_PRINTENV_URL" 755
install "$FW_CONFIG" "$FW_CONFIG_URL" 644
if [ ! -f "$FW_SETENV" ]; then
ln -s "$FW_PRINTENV" "$FW_SETENV" 2> /dev/null
if [ "$?" -ne "0" ]; then
mount -o remount,rw /
ln -s "$FW_PRINTENV" "$FW_SETENV"
mount -o remount,ro /
fi
fi
# Dump existing uBoot and compare it to a database of known versions
echo ""
echo "# Validating existing uBoot..."
# dump the first 512k of mtd0 to /tmp
$NANDDUMP --noecc --omitoob -l 0x80000 -f /tmp/uboot-mtd0-dump /dev/mtd0
wget -O "/tmp/valid-uboot.md5" "$VALID_UBOOT_MD5"
UPDATE_UBOOT=1
UBOOT_PLATFORM=
CURRENT_UBOOT_MD5=$(md5sum "/tmp/uboot-mtd0-dump" | cut -d' ' -f1)
UBOOT_DETAILS=$(grep $CURRENT_UBOOT_MD5 /tmp/valid-uboot.md5 | head -1)
if [ "$UBOOT_DETAILS" != "" ]; then
UBOOT_PLATFORM=$(echo $UBOOT_DETAILS | sed 's/^\w* \(\w*\) .*$/\1/')
UBOOT_VERSION=$(echo $UBOOT_DETAILS | sed 's/^\w* \w* \(.*\)$/\1/')
echo "## Valid uBoot detected: [$UBOOT_PLATFORM $UBOOT_VERSION]"
else
echo "## Unknown uBoot detected on mtd0: $CURRENT_UBOOT_MD5"
echo "##"
if [ "$NO_UBOOT_CHECK" != "1" ]; then
echo "## The installer could not detect the version of your current uBoot"
echo "## This may happen if you have installed a different uBoot on"
echo "## /dev/mtd0 or if you have bad blocks on /dev/mtd0"
echo "##"
echo "## If you have bad blocks on mtd0, you should not try to install uBoo
t."
# echo "##"
# echo "## If you have installed a diffirent uBoot on mtd0, and understand t
he"
# echo "## risks, you can re-run the installer with the --no-uboot-check par
ameter"
echo "##"
echo "## Installation cancelled."
rm "/tmp/valid-uboot.md5"
exit 1
else
echo "## --no-uboot-check flag detected, continuing installation"
while [ "$UBOOT_PLATFORM" = "" ]; do
echo ""
echo "############################################"
echo "Your device could not be auto-detected."
echo ""
echo "You must be using a device listed below to run this installer."
echo ""
echo "What device are you using? Type the number of your device and press
ENTER."
echo "1 - Seagate Dockstar"
echo "2 - Seagate GoFlex Net"
echo "3 - Seagate GoFlex Home"
echo "4 - Pogoplug v1"
echo "5 - Pogoplug v2 - Pink"
echo "6 - Other"
read device
if [ "$device" = "1" ]; then
echo "Selected Dockstar"
UBOOT_PLATFORM="dockstar"
UBOOT_VERSION="unknown"
elif [ "$device" = "2" ]; then
echo "Selected Seagate GoFlex Net"
UBOOT_PLATFORM="goflexnet"
UBOOT_VERSION="unknown"
elif [ "$device" = "3" ]; then
echo "Selected Seagate GoFlex Home"
UBOOT_PLATFORM="goflexhome"
UBOOT_VERSION="unknown"
elif [ "$device" = "4" ]; then
echo "Selected Pogoplug v1"
UBOOT_PLATFORM="pogov1"
UBOOT_VERSION="unknown"
elif [ "$device" = "5" ]; then
echo "Selected Pogoplug v2 - Pink"
UBOOT_PLATFORM="pinkpogo"
UBOOT_VERSION="unknown"
elif [ "$device" = "6" ]; then
echo "Selected Other Device, exiting"
echo "This installer is only compatible with the listed devices."
exit 1
else
echo "Invalid Input"
fi
done
fi
fi
if [ "$FORCE_PLATFORM" != "" -a "$FORCE_PLATFORM" != "$UBOOT_PLATFORM" ]; then
echo "## --force-platform paramater [$FORCE_PLATFORM] does not match detected
platform [$UBOOT_PLATFORM]."
echo -n "Are you sure your device is a "$FORCE_PLATFORM"? [y/N] "
read FORCE
if [ "$FORCE" = "y" -o "$FORCE" = "Y" ]; then
echo "## Forcing installation of [$FORCE_PLATFORM] platform"
UBOOT_PLATFORM=$FORCE_PLATFORM
UBOOT_VERSION="unknown"
else
echo "## Exiting. No changes were made to mtd0."
exit 1
fi
fi
UBOOT_IS_CURRENT=$(echo $UBOOT_VERSION | grep -c current)
if [ "$UBOOT_IS_CURRENT" = "1" ]; then
echo "## The newest uBoot is already installed on mtd0."
UPDATE_UBOOT=0
else
UBOOT_CURRENT=$(grep $UBOOT_PLATFORM /tmp/valid-uboot.md5 | grep current | he
ad -1 | sed 's/^\w* \w* \(.*\)-current$/\1/')
fi
rm "/tmp/valid-uboot.md5"
# If this is the first time this installer has been run in the
# original Pogoplug enviroment, check if the user wants to disable
# the Pogoplug services
if [ -d /usr/local/cloudengines/ -a ! -e $UBOOT_ORIGINAL ]; then
killall hbwd
echo ""
echo ""
echo ""
echo "DISABLE POGOPLUG SERVICES"
echo ""
echo "The pogoplug service includes an auto-update feature which could"
echo "be used to cripple or disable your device. It is recommended"
echo "that you disable this service."
echo ""
echo "NOTE: The pogoplug service is proprietary software"
echo "created by Cloud Engines. It is not available for use"
echo "in other distributions and will not be available in"
echo "your new linux installation even if you choose not to disable it."
echo ""
echo -n "Would you like to disable the pogoplug services? [Y/n] "
read DISABLE
if [ "$DISABLE" = "" -o "$DISABLE" = "y" -o "$DISABLE" = "Y" ];
then
echo "Applying fixes to the pogoplug environment..."
mount -o rw,remount /
# Add /sbin to the path and cleanup the shell prompt
if [ ! -f /root/.bash_profile ]; then
echo -e \
" export PATH='/usr/bin:/bin:/sbin'
" > /root/.bash_profile
fi
chmod go+w /dev/null
# Re-enable dropbear (updated dockstars only)
sed -i 's/^#\/usr\/sbin\/dropbear/\/usr\/sbin\/dropbear/' /etc/init.d/db >
/dev/null 2>&1
echo "Disabling the pogoplug service..."
# Comment out the line that starts hmbgr.sh
sed -i 's/^\/etc\/init.d\/hbmgr.sh start/#Uncomment the line below to enabl
e the pogoplug service\n#\/etc\/init.d\/hbmgr.sh start/' /etc/init.d/rcS
mount -o ro,remount /
echo "Done fixing pogoplug environment."
echo ""
fi
UBOOT_ORIGINAL_URL="$UBOOT_MTD0_BASE_URL.$UBOOT_PLATFORM.original.kwb"
export PS1='\h:\w\$ '
install "$UBOOT_ORIGINAL" "$UBOOT_ORIGINAL_URL" 644
install "$BLPARAM" "$BLPARAM_URL" 755
if [ "$UBOOT_PLATFORM" = "pinkpogo" ]; then BOOTCMD='nand read.e 0x800000
0x100000 0x200000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000'
# dockstar, goflex, and pogov1 have the same bootcmd
else BOOTCMD='nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(conso
le) $(bootargs_root); bootm 0x800000'
fi
$BLPARAM "bootcmd=$BOOTCMD" > /dev/null 2>&1
# Preserve the MAC address
ENV_ETHADDR=`$BLPARAM | grep "^ethaddr=" | cut -d'=' -f 2-`
fi
# Download and install the latest uBoot
if [ "$UPDATE_UBOOT" = "1" ]; then
echo ""
echo "# Installing uBoot"
UBOOT_MTD0_URL="$UBOOT_MTD0_BASE_URL.$UBOOT_PLATFORM.$UBOOT_CURRENT.kwb"
echo "## Installing $UBOOT_PLATFORM $UBOOT_CURRENT"
if [ -f "$UBOOT_MTD0" ]; then rm "$UBOOT_MTD0"; fi
download_and_verify "$UBOOT_MTD0" "$UBOOT_MTD0_URL"
if [ "$?" -ne "0" ]; then
echo "## uBoot could not be downloaded, or the MD5 does not match."
echo "## Exiting. No changes were made to mtd0."
exit 1
fi
# Write new uBoot to mtd0
# Erase the first 512k
$FLASH_ERASE /dev/mtd0 0 4
$NANDWRITE /dev/mtd0 $UBOOT_MTD0
# dump mtd0 and compare the checksum, to make sure it installed properly
$NANDDUMP --noecc --omitoob -l 0x80000 -f /tmp/mtd0.uboot /dev/mtd0
echo "## Verifying new uBoot..."
if [ -f "$UBOOT_MTD0.md5" ]; then rm "$UBOOT_MTD0.md5"; fi
wget -O "$UBOOT_MTD0.md5" "$UBOOT_MTD0_URL.md5"
verify_md5 "/tmp/mtd0.uboot" "$UBOOT_MTD0.md5"
if [ "$?" -ne "0" ]; then
rm -f "$UBOOT.md5"
echo "##"
echo "##"
echo "## VERIFICATION FAILED!"
echo "##"
echo "## uBoot was not properly installed to mtd0."
echo "##"
echo "##"
echo "## YOUR DEVICE MAY BE IN AN UNUSABLE STATE."
echo "## DO NOT REBOOT OR POWER OFF YOUR DEVICE"
echo "##"
echo "##"
echo "## Make a backup of /tmp/uboot-mtd0-dump someplace safe and"
echo "## then re-run this installer."
exit 1
else
echo "# Verified successfully!"
fi
rm -f "$UBOOT_MTD0.md5"
fi
if [ "$UPDATE_UBOOT" = "0" ]; then
UPDATE_UBOOT_ENVIRONMENT=0
elif [ "$UBOOT_VERSION" = "original" -o "$UBOOT_VERSION" = "unknown" ]; then
UPDATE_UBOOT_ENVIRONMENT=1
else # Updating uboot, but it's from a known "new" uboot, no need to reset the
environment
UPDATE_UBOOT_ENVIRONMENT=0
fi
if [ "$UPDATE_UBOOT_ENVIRONMENT" = "0" -a "$1" != "--noprompt" ]; then
echo ""
echo ""
if [ "$UPDATE_UBOOT" = "0" ]; then
echo "You are already running the latest uBoot."
else
echo "You are already running a modern uBoot."
fi
echo "Your current uBoot environment should be reasonable. However, if you'r
e having"
echo "any probems booting, you can reset the environment variables to know go
od values."
echo -n "Would you like to reset the uBoot environment? [N/y] "
read PROMPT
if [ "$PROMPT" = "y" -o "$PROMPT" = "Y" ]; then
UPDATE_UBOOT_ENVIRONMENT=1
fi
fi
if [ "$UPDATE_UBOOT_ENVIRONMENT" = "1" ]; then
echo ""
echo "# Installing uBoot environment"
# Preserve the MAC address
if [ "$ENV_ETHADDR" = "" ]; then
ENV_ETHADDR=`$FW_PRINTENV ethaddr 2> /dev/null | cut -d'=' -f 2-`
fi
# Preserve the 'rescue_installed' setting
ENV_RESCUE_INSTALLED=`$FW_PRINTENV rescue_installed 2> /dev/null | cut -d'='
-f 2-`
if [ "$ENV_RESCUE_INSTALLED" = "" ]; then
ENV_BOOTCMD_RESCUE=`$FW_PRINTENV bootcmd_rescue 2> /dev/null`
if [ "$ENV_BOOTCMD_RESCUE" != "" ]; then
ENV_RESCUE_INSTALLED=1
fi
fi
# Preserve the arcNumber value
ENV_ARCNUMBER=`$FW_PRINTENV arcNumber 2> /dev/null | cut -d'=' -f 2-`
# Preserve the custom kernel parameters
ENV_RESCUE_CUSTOM=`$FW_PRINTENV rescue_custom_params 2> /dev/null | cut -d'='
-f 2-`
ENV_USB_CUSTOM=`$FW_PRINTENV usb_custom_params 2> /dev/null | cut -d'=' -f 2-
`
ENV_UBIFS_CUSTOM=`$FW_PRINTENV ubifs_custom_params 2> /dev/null | cut -d'=' -
f 2-`
# Install the uBoot environment
download_and_verify "$UBOOT_ENV" "$UBOOT_ENV_URL"
if [ "$?" -ne "0" ]; then
echo "## Could not install uBoot environment, exiting"
exit 1
fi
echo ""
echo "# Verifying uBoot environment"
# Verify the uBoot environment
$NANDDUMP --noecc --omitoob -f "/tmp/uboot.environment" -s 0xc0000 -l 0x20000
/dev/mtd0
wget -O "$UBOOT_ENV.md5" "$UBOOT_ENV_URL.md5"
verify_md5 "/tmp/uboot.environment" "$UBOOT_ENV.md5"
if [ "$?" -ne "0" ]; then
rm -f "$UBOOT_ENV.md5"
echo "## VERIFICATION FAILED!"
echo "## uBoot environment was not properly written to mtd0. Please re-run
this installer."
exit 1
fi
rm -f "$UBOOT_ENV.md5"
$FW_SETENV ethaddr $ENV_ETHADDR
if [ "$ENV_RESCUE_INSTALLED" = "1" ]; then $FW_SETENV rescue_installed $ENV_R
ESCUE_INSTALLED; fi
if [ "$ENV_RESCUE_CUSTOM" != "" ]; then $FW_SETENV rescue_custom_params $ENV_
RESCUE_CUSTOM; fi
if [ "$ENV_USB_CUSTOM" != "" ]; then $FW_SETENV usb_custom_params $ENV_USB_CU
STOM; fi
if [ "$ENV_UBIFS_CUSTOM" != "" ]; then $FW_SETENV ubifs_custom_params $ENV_UB
IFS_CUSTOM; fi
if [ "$ENV_ARCNUMBER" != "" ]; then
$FW_SETENV arcNumber $ENV_ARCNUMBER
# If there was no arcNumber set, then this is probably a new install.
# Set the default arcNumber for the platform
# Note: As of 10/24/2010 everything will default to the SHEEVAPLUG arcNumber
(2097)
# at some point, they should start using the newer dockstar ID (2998) but cur
rently the most
# common kernels do not support the Dockstar machine ID
else
$FW_SETENV arcNumber 2097
echo ""
echo ""
echo "# Setting arcNumber to 2097 (SheevaPlug)"
echo "# Note: if you have a kernel that supports your platform, you should
use the proper arcNumber."
echo "# You can set the correct arcNumber by running the following command:
"
if [ "$UBOOT_PLATFORM" = "dockstar" ]; then echo $FW_SETENV arcNumber 29
98
elif [ "$UBOOT_PLATFORM" = "goflexhome" ]; then echo $FW_SETENV arcNumber 3
089
elif [ "$UBOOT_PLATFORM" = "goflexnet" ]; then echo $FW_SETENV arcNumber 30
89
elif [ "$UBOOT_PLATFORM" = "pinkpogo" ]; then echo $FW_SETENV arcNumber 29
98
elif [ "$UBOOT_PLATFORM" = "pogov1" ]; then echo $FW_SETENV arcNumber 29
98
fi
fi
fi
echo ""
echo "# uBoot installation has completed successfully."
Sorry there's a bit of line wrapping there
contents of /usr/sbin:-
Pogoplug:/usr/sbin$ ls -l
-rwxr-xr-x 1 root root 14168 Jan 1 00:54 blparam
lrwxrwxrwx 1 root root 17 Nov 4 2009 chpasswd -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 chroot -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 crond -> ../../bin/busybox
-rwxr-xr-x 1 root root 18677 Jun 3 2013 debootstrap
lrwxrwxrwx 1 root root 17 Nov 4 2009 dhcprelay -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 dnsd -> ../../bin/busybox
-rwxr-xr-x 1 root root 242462 Mar 10 2009 dropbear
lrwxrwxrwx 1 root root 17 Nov 4 2009 fakeidentd -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 fbset -> ../../bin/busybox
-rwxr-xr-x 1 root root 12819 Jan 1 00:54 flash_erase
-rwxr-xr-x 1 root root 668497 Jan 1 00:54 fw_printenv
lrwxrwxrwx 1 root root 21 Jan 1 00:54 fw_setenv -> /usr/sbin/fw_printenv
lrwxrwxrwx 1 root root 17 Nov 4 2009 httpd -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 inetd -> ../../bin/busybox
-rwxr-xr-x 1 root root 21286 Jan 1 00:54 nanddump
-rwxr-xr-x 1 root root 11500 Jan 1 00:54 nandwrite
lrwxrwxrwx 1 root root 17 Nov 4 2009 rdate -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 readprofile -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 setlogcons -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 telnetd -> ../../bin/busybox
lrwxrwxrwx 1 root root 17 Nov 4 2009 udhcpd -> ../../bin/busybox
Pogoplug:/usr/sbin$ chmod +x ./debootstrap
chmod: ./debootstrap: Read-only file system
Pogoplug:/usr/sbin$ cd ..
Pogoplug:/usr$ rm -rf sbin/
rm: cannot remove 'sbin/nanddump': Read-only file system
rm: cannot remove 'sbin/dnsd': Read-only file system
rm: cannot remove 'sbin/nandwrite': Read-only file system
rm: cannot remove 'sbin/crond': Read-only file system
rm: cannot remove 'sbin/fbset': Read-only file system
rm: cannot remove 'sbin/httpd': Read-only file system
rm: cannot remove 'sbin/inetd': Read-only file system
rm: cannot remove 'sbin/rdate': Read-only file system
rm: cannot remove 'sbin/dhcprelay': Read-only file system
rm: cannot remove 'sbin/fakeidentd': Read-only file system
rm: cannot remove 'sbin/telnetd': Read-only file system
rm: cannot remove 'sbin/setlogcons': Read-only file system
rm: cannot remove 'sbin/dropbear': Read-only file system
rm: cannot remove 'sbin/fw_setenv': Read-only file system
rm: cannot remove 'sbin/flash_erase': Read-only file system
rm: cannot remove 'sbin/chroot': Read-only file system
rm: cannot remove 'sbin/chpasswd': Read-only file system
rm: cannot remove 'sbin/debootstrap': Read-only file system
rm: cannot remove 'sbin/readprofile': Read-only file system
rm: cannot remove 'sbin/udhcpd': Read-only file system
rm: cannot remove 'sbin/fw_printenv': Read-only file system
rm: cannot remove 'sbin/blparam': Read-only file system
rm: cannot remove 'sbin': Read-only file system
I'm not sure how to use flash_erase .
I'll change the repo to the main debian site, run the uboot installer
, then the install script,
and if it doesn't play then , it can stay as a webcam server running
Arch.
I'm not even sure installing squeeze and a distribution upgrade will
run properly..
Many thanks for the help Len
--
--
Best wishes /73
Richard Bown
Email : richard@g8jvm.com
HTTP : http://www.g8jvm.com
nil carborundum a illegitemis
##################################################################################
Ham Call G8JVM . OS Linux Mint 16 x86_64 on a Dell Inspiron N5030 laptop
Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W
QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W
Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
##################################################################################
Reply to: