Re: Kantronics KPC3+
On Fri, 23 Feb 2001, Carlos Barros wrote:
> insmod mkiss
> stty -F /dev/ttyS1 speed 1200
Using stty should be completely unnecessary. Kissattach sets the
serial port speed itself. Just leave the stty out.
> kissattach /dev/ttyS1 radio 192.168.1.1
>
> where radio is defined in /etc/ax25/axports :
> ---
> radio CX3ACS-1 1200 255 2 144.675 MHz (1200 bps)
> ---
Are you sure the _serial_port_ speed is really 1200 bps? It is a common
mistake to set the speed to the radio speed and usually that doesn't match
the serial port speed.
--
Tomi Manninen Internet: oh2bns@sral.fi
OH2BNS AX.25: oh2bns@oh2rbi.fin.eu
KP20ME04 Amprnet: oh2bns@oh2rbi.ampr.org
Reply to: