Bug#921420: linux-image-4.19.0-1-amd64: Does not work with higher resolutions (above 1920)
Package: src:linux
Version: 4.19.12-1
Severity: important
I first noticed this problem on a streched screen with a resolution of 3840x600, which worked fine on debian stretch, but
started displaying 1920x1080 after an upgrade to buster. I can reproduce this on a more conventional screen of 2560x1440.
The resolution seems to be maxed out at 1920x<something> for Xorg, but also for a splash-screen (plymouth) and the
console.
I did a fresh install of buster. I can still reproduce the bug, e.g. 'stty -a' reports "rows 75; columns 240;".
When I downgrade the kernel to the version from stretch, I do get the proper resolution in Xorg and on the console (now
"rows 90; columns 320;").
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=dee31de4-9b67-40ed-be6f-b7e169c72b7a ro quiet
** Not tainted
** Kernel log:
[ 5.012131] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:03F0:034A.0001/input/input6
[ 5.069468] hid-generic 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:10.0-2/input0
[ 5.070114] input: Chicony HP Elite USB Keyboard System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input7
[ 5.110417] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00
[ 5.110425] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.110429] usb 1-1.4: Product: HP USB Optical Mouse
[ 5.110433] usb 1-1.4: Manufacturer: PixArt
[ 5.115316] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:134A.0003/input/input9
[ 5.129479] hid-generic 0003:03F0:134A.0003: input,hidraw1: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:12.0-1.4/input0
[ 5.129659] input: Chicony HP Elite USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input8
[ 5.129768] hid-generic 0003:03F0:034A.0002: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:10.0-2/input1
[ 5.203964] PM: Image not found (code -22)
[ 5.425836] random: fast init done
[ 5.426506] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.778400] systemd[1]: Inserted module 'autofs4'
[ 5.817372] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.837371] systemd[1]: Detected architecture x86-64.
[ 5.844039] systemd[1]: Set hostname to <pbc-debian>.
[ 6.174633] systemd[1]: Created slice User and Session Slice.
[ 6.175064] systemd[1]: Listening on udev Control Socket.
[ 6.175225] systemd[1]: Listening on udev Kernel Socket.
[ 6.175732] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.175959] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.177051] systemd[1]: Created slice system-getty.slice.
[ 6.177301] systemd[1]: Listening on Journal Socket.
[ 6.259365] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.302652] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 6.588780] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.620280] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
[ 6.662829] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 6.663019] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.663026] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 6.672948] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 6.674837] audit: type=1400 audit(1549359451.312:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=340 comm="apparmor_parser"
[ 6.674844] audit: type=1400 audit(1549359451.312:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=340 comm="apparmor_parser"
[ 6.686259] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.693628] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ 6.693720] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.693788] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.693977] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ 6.694041] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.694098] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.694176] audit: type=1400 audit(1549359451.332:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=338 comm="apparmor_parser"
[ 6.694716] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ 6.694791] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.694882] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.695101] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 6.702742] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ 6.702832] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.702905] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.703103] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20180810/dsopcode-201)
[ 6.703178] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.703244] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20180810/psparse-516)
[ 6.711300] audit: type=1400 audit(1549359451.348:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=339 comm="apparmor_parser"
[ 6.711305] audit: type=1400 audit(1549359451.348:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=339 comm="apparmor_parser"
[ 6.711309] audit: type=1400 audit(1549359451.348:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=339 comm="apparmor_parser"
[ 6.720955] audit: type=1400 audit(1549359451.352:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=348 comm="apparmor_parser"
[ 6.738880] systemd-journald[274]: Received request to flush runtime journal from PID 1
[ 6.752722] audit: type=1400 audit(1549359451.388:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=351 comm="apparmor_parser"
[ 6.784983] audit: type=1400 audit(1549359451.420:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=343 comm="apparmor_parser"
[ 6.784989] audit: type=1400 audit(1549359451.420:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=343 comm="apparmor_parser"
[ 6.832652] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 6.874386] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
[ 6.874498] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input13
[ 6.912147] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.912153] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.912156] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.912159] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.912161] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.912164] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 6.912167] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b
[ 7.008802] kvm: disabled by bios
[ 7.025758] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input14
[ 7.025871] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:09.2/sound/card1/input15
[ 7.025970] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input16
[ 7.039969] MCE: In-kernel MCE decoding enabled.
[ 7.044675] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.044678] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.102128] random: alsactl: uninitialized urandom read (4 bytes read)
[ 7.102611] random: alsactl: uninitialized urandom read (4 bytes read)
[ 7.122609] Adding 1573616k swap on /dev/sda2. Priority:-2 extents:1 across:1573616k SSFS
[ 7.278715] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
[ 7.278780] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 7.278843] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
[ 7.278851] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
[ 7.279106] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 7.359886] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[ 7.379681] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 7.379948] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 7.380578] r8169 0000:01:00.0 enp1s0: Link is Down
[ 7.488209] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 7.713819] random: crng init done
[ 7.713823] random: 1 urandom warning(s) missed due to ratelimiting
[ 7.848140] NET: Registered protocol family 3
[ 7.880940] NET: Registered protocol family 5
[ 10.384734] fuse init (API version 7.27)
[ 10.515688] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.515699] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
** Model information
sys_vendor: HP
product_name: HP t630 Thin Client
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: AMI
bios_version: M40 v01.05
board_vendor: HP
board_name: 8158
board_version: A01
** Loaded modules:
fuse
appletalk
psnap
llc
ax25
edac_mce_amd
ccp
kvm
snd_hda_codec_realtek
irqbypass
snd_hda_codec_hdmi
snd_hda_codec_generic
crct10dif_pclmul
snd_hda_intel
crc32_pclmul
snd_hda_codec
joydev
snd_hda_core
snd_hwdep
ghash_clmulni_intel
tpm_crb
snd_pcm
wmi_bmof
hp_wmi
sparse_keymap
sg
snd_timer
rfkill
serio_raw
pcspkr
snd
sp5100_tco
k10temp
fam15h_power
soundcore
tpm_tis
tpm_tis_core
tpm
pcc_cpufreq
evdev
rng_core
acpi_cpufreq
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_generic
usbhid
hid
sd_mod
amdkfd
amdgpu
crc32c_intel
ahci
libahci
xhci_pci
xhci_hcd
chash
gpu_sched
ehci_pci
libata
i2c_algo_bit
ehci_hcd
ttm
aesni_intel
drm_kms_helper
psmouse
scsi_mod
aes_x86_64
r8169
usbcore
crypto_simd
cryptd
glue_helper
drm
libphy
i2c_piix4
usb_common
wmi
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex [1022:1576]
Subsystem: Hewlett-Packard Company Family 15h (Models 60h-6fh) Processor Root Complex [103c:8158]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit [1022:1577]
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit [1022:1577]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Capabilities: [40] Secure device <?>
Capabilities: [64] MSI: Enable+ Count=1/4 Maskable- 64bit+
Address: 00000000fee04004 Data: 4021
Capabilities: [74] HyperTransport: MSI Mapping Enable+ Fixed+
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo [1002:9874] (rev 88) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Wani [Radeon R5/R6/R7 Graphics] [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at f000 [size=256]
Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable+, Smallest Translation Unit: 00
Capabilities: [2c0 v1] Page Request Interface (PRI)
PRICtl: Enable+ Reset-
PRISta: RF- UPRGI- Stopped+
Page Request Capacity: 00000020, Page Request Allocation: 00000020
Capabilities: [2d0 v1] Process Address Space ID (PASID)
PASIDCap: Exec- Priv-, Max PASID Width: 10
PASIDCtl: Enable+ Exec- Priv-
Kernel driver in use: amdgpu
Kernel modules: amdgpu
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio [1002:9840]
Subsystem: Hewlett-Packard Company Kabini HDMI/DP Audio [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 37
Region 0: Memory at feb64000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge [1022:157b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port [1022:157c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 0000
Capabilities: [c0] Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port [1022:1234]
Capabilities: [c8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [270 v1] #19
Kernel driver in use: pcieport
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge [1022:157b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:08.0 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:1578]
Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1578]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0800000 (64-bit, prefetchable) [size=128K]
Region 2: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at feb6f000 (32-bit, non-prefetchable) [size=4K]
Region 5: Memory at feb6a000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [50] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=5 offset=00000000
PBA: BAR=5 offset=00001000
Capabilities: [5c] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR-
AFCtrl: FLR-
AFStatus: TP-
00:09.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:157d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:09.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller [1022:157a]
Subsystem: Hewlett-Packard Company Family 15h (Models 60h-6fh) Audio Controller [103c:8158]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
Region 0: Memory at feb60000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR-
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company FCH USB XHCI Controller [103c:8158]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb68000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [100 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 49) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company FCH SATA Controller [AHCI mode] [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb6d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller [1022:7908] (rev 49) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company FCH USB EHCI Controller [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb6c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 4a)
Subsystem: Hewlett-Packard Company FCH SMBus Controller [103c:8158]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 11)
Subsystem: Hewlett-Packard Company FCH LPC Bridge [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0 [1022:1570]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1 [1022:1571]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2 [1022:1572]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3 [1022:1573]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4 [1022:1574]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5 [1022:1575]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [103c:8158]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at fea04000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at fea00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE#
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Capabilities: [170 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [178 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 001 Device 003: ID 03f0:134a Hewlett-Packard Optical Mouse
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 03f0:034a Hewlett-Packard Elite Keyboard
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.2-7
ii firmware-linux-free 3.4
pn irqbalance <none>
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-10
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
ii firmware-amd-graphics 20190114-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20190114-1
ii firmware-misc-nonfree 20190114-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Xorg.0.log (with bug):
[ 7.912]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 7.912] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 7.912] Current Operating System: Linux pbc-debian 4.19.0-1-amd64 #1 SMP Debian 4.19.12-1 (2018-12-22) x86_64
[ 7.912] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=dee31de4-9b67-40ed-be6f-b7e169c72b7a ro quiet
[ 7.913] Build Date: 25 October 2018 06:15:23PM
[ 7.913] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 7.913] Current version of pixman: 0.36.0
[ 7.913] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.913] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.913] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 5 09:53:19 2019
[ 7.914] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.915] (==) No Layout section. Using the first Screen section.
[ 7.916] (==) No screen section available. Using defaults.
[ 7.916] (**) |-->Screen "Default Screen Section" (0)
[ 7.916] (**) | |-->Monitor "<default monitor>"
[ 7.918] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.918] (==) Automatically adding devices
[ 7.918] (==) Automatically enabling devices
[ 7.918] (==) Automatically adding GPU devices
[ 7.918] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7.919] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 7.919] Entry deleted from font path.
[ 7.920] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 7.920] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.920] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.920] (II) Loader magic: 0x561f1c1f4e20
[ 7.920] (II) Module ABI versions:
[ 7.920] X.Org ANSI C Emulation: 0.4
[ 7.920] X.Org Video Driver: 24.0
[ 7.920] X.Org XInput driver : 24.1
[ 7.920] X.Org Server Extension : 10.0
[ 7.922] (++) using VT number 7
[ 7.922] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 7.923] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.937] (--) PCI:*(0@0:1:0) 1002:9874:103c:8158 rev 136, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 7.938] (II) LoadModule: "glx"
[ 7.939] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.962] (II) Module glx: vendor="X.Org Foundation"
[ 7.962] compiled for 1.20.3, module version = 1.0.0
[ 7.962] ABI class: X.Org Server Extension, version 10.0
[ 7.962] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 7.962] loading driver: amdgpu
[ 7.962] (==) Matched amdgpu as autoconfigured driver 0
[ 7.962] (==) Matched ati as autoconfigured driver 1
[ 7.962] (==) Matched modesetting as autoconfigured driver 2
[ 7.962] (==) Matched fbdev as autoconfigured driver 3
[ 7.962] (==) Matched vesa as autoconfigured driver 4
[ 7.962] (==) Assigned the driver to the xf86ConfigLayout
[ 7.962] (II) LoadModule: "amdgpu"
[ 7.963] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 7.970] (II) Module amdgpu: vendor="X.Org Foundation"
[ 7.970] compiled for 1.20.1, module version = 18.1.0
[ 7.970] Module class: X.Org Video Driver
[ 7.970] ABI class: X.Org Video Driver, version 24.0
[ 7.970] (II) LoadModule: "ati"
[ 7.970] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 7.971] (II) Module ati: vendor="X.Org Foundation"
[ 7.971] compiled for 1.20.1, module version = 18.1.0
[ 7.971] Module class: X.Org Video Driver
[ 7.971] ABI class: X.Org Video Driver, version 24.0
[ 7.999] (II) LoadModule: "modesetting"
[ 7.999] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.002] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.002] compiled for 1.20.3, module version = 1.20.3
[ 8.002] Module class: X.Org Video Driver
[ 8.002] ABI class: X.Org Video Driver, version 24.0
[ 8.002] (II) LoadModule: "fbdev"
[ 8.002] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.003] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.003] compiled for 1.20.0, module version = 0.5.0
[ 8.003] Module class: X.Org Video Driver
[ 8.003] ABI class: X.Org Video Driver, version 24.0
[ 8.003] (II) LoadModule: "vesa"
[ 8.003] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.004] (II) Module vesa: vendor="X.Org Foundation"
[ 8.004] compiled for 1.20.1, module version = 2.4.0
[ 8.004] Module class: X.Org Video Driver
[ 8.004] ABI class: X.Org Video Driver, version 24.0
[ 8.004] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 8.004] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.004] (II) FBDEV: driver for framebuffer: fbdev
[ 8.004] (II) VESA: driver for VESA chipsets: vesa
[ 8.025] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 8.033] (WW) Falling back to old probe method for modesetting
[ 8.033] (WW) Falling back to old probe method for fbdev
[ 8.033] (II) Loading sub module "fbdevhw"
[ 8.033] (II) LoadModule: "fbdevhw"
[ 8.033] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.034] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.034] compiled for 1.20.3, module version = 0.0.2
[ 8.034] ABI class: X.Org Video Driver, version 24.0
[ 8.035] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.035] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 8.035] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 8.035] (==) AMDGPU(0): Default visual is TrueColor
[ 8.035] (==) AMDGPU(0): RGB weight 888
[ 8.035] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 8.035] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x9874)
[ 8.035] (II) Loading sub module "fb"
[ 8.035] (II) LoadModule: "fb"
[ 8.035] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.037] (II) Module fb: vendor="X.Org Foundation"
[ 8.037] compiled for 1.20.3, module version = 1.0.0
[ 8.037] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.037] (II) Loading sub module "dri2"
[ 8.037] (II) LoadModule: "dri2"
[ 8.037] (II) Module "dri2" already built-in
[ 8.711] (II) Loading sub module "glamoregl"
[ 8.711] (II) LoadModule: "glamoregl"
[ 8.712] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.733] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.733] compiled for 1.20.3, module version = 1.0.1
[ 8.733] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.792] (II) AMDGPU(0): glamor X acceleration enabled on AMD CARRIZO (DRM 3.27.0, 4.19.0-1-amd64, LLVM 7.0.1)
[ 8.792] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 8.792] (==) AMDGPU(0): TearFree property default: auto
[ 8.793] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 8.793] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 8.794] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 8.800] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 8.800] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 8.800] (II) AMDGPU(0): Manufacturer: IVM Model: 6630 Serial#: 1536
[ 8.800] (II) AMDGPU(0): Year: 2017 Week: 40
[ 8.800] (II) AMDGPU(0): EDID Version: 1.3
[ 8.800] (II) AMDGPU(0): Digital Display Input
[ 8.800] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 8.800] (II) AMDGPU(0): Gamma: 2.20
[ 8.800] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 8.800] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 8.800] (II) AMDGPU(0): First detailed timing is preferred mode
[ 8.800] (II) AMDGPU(0): redX: 0.668 redY: 0.332 greenX: 0.300 greenY: 0.625
[ 8.800] (II) AMDGPU(0): blueX: 0.143 blueY: 0.052 whiteX: 0.323 whiteY: 0.329
[ 8.800] (II) AMDGPU(0): Supported established timings:
[ 8.800] (II) AMDGPU(0): 640x480@60Hz
[ 8.801] (II) AMDGPU(0): 640x480@75Hz
[ 8.801] (II) AMDGPU(0): 800x600@60Hz
[ 8.801] (II) AMDGPU(0): 800x600@75Hz
[ 8.801] (II) AMDGPU(0): 1024x768@60Hz
[ 8.801] (II) AMDGPU(0): 1024x768@75Hz
[ 8.801] (II) AMDGPU(0): 1280x1024@75Hz
[ 8.801] (II) AMDGPU(0): Manufacturer's mask: 0
[ 8.801] (II) AMDGPU(0): Supported standard timings:
[ 8.801] (II) AMDGPU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.801] (II) AMDGPU(0): #1: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 8.801] (II) AMDGPU(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 8.801] (II) AMDGPU(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 8.801] (II) AMDGPU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 8.801] (II) AMDGPU(0): #5: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 8.801] (II) AMDGPU(0): #6: hsize: 2048 vsize 1280 refresh: 60 vid: 225
[ 8.801] (II) AMDGPU(0): Supported detailed timing:
[ 8.801] (II) AMDGPU(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 8.801] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 8.801] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 8.801] (II) AMDGPU(0): Serial No: 1152174001536
[ 8.801] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 89 kHz, PixClock max 275 MHz
[ 8.801] (II) AMDGPU(0): Monitor name: PL2792Q
[ 8.801] (II) AMDGPU(0): Supported detailed timing:
[ 8.801] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 597 x 336 mm
[ 8.801] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 8.801] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 8.801] (II) AMDGPU(0): Supported detailed timing:
[ 8.801] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 8.801] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 8.801] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 8.801] (II) AMDGPU(0): Supported detailed timing:
[ 8.801] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 8.801] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 8.801] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 8.801] (II) AMDGPU(0): Supported detailed timing:
[ 8.801] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 597 x 336 mm
[ 8.801] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 8.801] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 8.801] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 8.801] (II) AMDGPU(0): EDID (in hex):
[ 8.801] (II) AMDGPU(0): 00ffffffffffff0026cd306600060000
[ 8.801] (II) AMDGPU(0): 281b0103803c2278ea0c9dab554ca024
[ 8.801] (II) AMDGPU(0): 0d5254254b009500a9c0a940b300d1c0
[ 8.801] (II) AMDGPU(0): d100e1000101565e00a0a0a029503020
[ 8.801] (II) AMDGPU(0): 350055502100001a000000ff00313135
[ 8.801] (II) AMDGPU(0): 32313734303031353336000000fd0032
[ 8.801] (II) AMDGPU(0): 4c1e591b000a202020202020000000fc
[ 8.801] (II) AMDGPU(0): 00504c32373932510a202020202001f1
[ 8.801] (II) AMDGPU(0): 020324f14f1005040302011112131406
[ 8.801] (II) AMDGPU(0): 0715161f230907078301000067030c00
[ 8.801] (II) AMDGPU(0): 10003836023a801871382d40582c4500
[ 8.801] (II) AMDGPU(0): 55502100001e011d8018711c1620582c
[ 8.801] (II) AMDGPU(0): 250055502100009e011d007251d01e20
[ 8.801] (II) AMDGPU(0): 6e28550055502100001e8c0ad08a20e0
[ 8.801] (II) AMDGPU(0): 2d10103e960055502100001800000000
[ 8.801] (II) AMDGPU(0): 0000000000000000000000000000005b
[ 8.801] (--) AMDGPU(0): HDMI max TMDS frequency 270000KHz
[ 8.801] (II) AMDGPU(0): Printing probed modes for output DisplayPort-1
[ 8.801] (II) AMDGPU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.801] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.801] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 8.801] (II) AMDGPU(0): Output DisplayPort-1 connected
[ 8.801] (II) AMDGPU(0): Using exact sizes for initial modes
[ 8.801] (II) AMDGPU(0): Output DisplayPort-1 using initial mode 1920x1080 +0+0
[ 8.801] (II) AMDGPU(0): mem size init: gart size :a2134000 vram size: s:1f15a000 visible:1f15a000
[ 8.801] (==) AMDGPU(0): DPI set to (96, 96)
[ 8.801] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.801] (II) Loading sub module "ramdac"
[ 8.801] (II) LoadModule: "ramdac"
[ 8.802] (II) Module "ramdac" already built-in
[ 8.802] (II) UnloadModule: "modesetting"
[ 8.802] (II) Unloading modesetting
[ 8.802] (II) UnloadModule: "fbdev"
[ 8.802] (II) Unloading fbdev
[ 8.802] (II) UnloadSubModule: "fbdevhw"
[ 8.802] (II) Unloading fbdevhw
[ 8.802] (II) UnloadModule: "vesa"
[ 8.802] (II) Unloading vesa
[ 8.804] (II) AMDGPU(0): [DRI2] Setup complete
[ 8.805] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 8.805] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 8.805] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[ 8.807] (II) AMDGPU(0): SYNC extension fences enabled
[ 8.807] (II) AMDGPU(0): Present extension enabled
[ 8.807] (==) AMDGPU(0): DRI3 enabled
[ 8.807] (==) AMDGPU(0): Backing store enabled
[ 8.807] (II) AMDGPU(0): Direct rendering enabled
[ 8.825] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 8.825] (II) AMDGPU(0): Acceleration enabled
[ 8.825] (==) AMDGPU(0): DPMS enabled
[ 8.825] (==) AMDGPU(0): Silken mouse enabled
[ 8.825] (II) AMDGPU(0): Set up textured video (glamor)
[ 8.851] (II) Initializing extension Generic Event Extension
[ 8.851] (II) Initializing extension SHAPE
[ 8.851] (II) Initializing extension MIT-SHM
[ 8.851] (II) Initializing extension XInputExtension
[ 8.853] (II) Initializing extension XTEST
[ 8.853] (II) Initializing extension BIG-REQUESTS
[ 8.853] (II) Initializing extension SYNC
[ 8.853] (II) Initializing extension XKEYBOARD
[ 8.854] (II) Initializing extension XC-MISC
[ 8.854] (II) Initializing extension SECURITY
[ 8.854] (II) Initializing extension XFIXES
[ 8.854] (II) Initializing extension RENDER
[ 8.854] (II) Initializing extension RANDR
[ 8.855] (II) Initializing extension COMPOSITE
[ 8.855] (II) Initializing extension DAMAGE
[ 8.855] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.855] (II) Initializing extension DOUBLE-BUFFER
[ 8.855] (II) Initializing extension RECORD
[ 8.856] (II) Initializing extension DPMS
[ 8.856] (II) Initializing extension Present
[ 8.856] (II) Initializing extension DRI3
[ 8.856] (II) Initializing extension X-Resource
[ 8.857] (II) Initializing extension XVideo
[ 8.857] (II) Initializing extension XVideo-MotionCompensation
[ 8.857] (II) Initializing extension SELinux
[ 8.857] (II) SELinux: Disabled on system
[ 8.857] (II) Initializing extension GLX
[ 8.866] (II) AIGLX: Loaded and initialized radeonsi
[ 8.866] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.866] (II) Initializing extension XFree86-VidModeExtension
[ 8.867] (II) Initializing extension XFree86-DGA
[ 8.867] (II) Initializing extension XFree86-DRI
[ 8.867] (II) Initializing extension DRI2
[ 8.875] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[ 9.157] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.157] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.157] (II) LoadModule: "libinput"
[ 9.157] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 9.172] (II) Module libinput: vendor="X.Org Foundation"
[ 9.172] compiled for 1.20.1, module version = 0.28.1
[ 9.172] Module class: X.Org XInput Driver
[ 9.172] ABI class: X.Org XInput driver, version 24.1
[ 9.172] (II) Using input driver 'libinput' for 'Power Button'
[ 9.172] (**) Power Button: always reports core events
[ 9.172] (**) Option "Device" "/dev/input/event1"
[ 9.173] (**) Option "_source" "server/udev"
[ 9.178] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.178] (II) event1 - Power Button: device is a keyboard
[ 9.178] (II) event1 - Power Button: device removed
[ 9.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 9.200] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.200] (**) Option "xkb_model" "pc105"
[ 9.200] (**) Option "xkb_layout" "us"
[ 9.203] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.203] (II) event1 - Power Button: device is a keyboard
[ 9.204] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 9.204] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.204] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.204] (**) Video Bus: always reports core events
[ 9.204] (**) Option "Device" "/dev/input/event2"
[ 9.204] (**) Option "_source" "server/udev"
[ 9.206] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.206] (II) event2 - Video Bus: device is a keyboard
[ 9.207] (II) event2 - Video Bus: device removed
[ 9.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event2"
[ 9.240] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.240] (**) Option "xkb_model" "pc105"
[ 9.240] (**) Option "xkb_layout" "us"
[ 9.243] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.243] (II) event2 - Video Bus: device is a keyboard
[ 9.244] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 9.244] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.244] (II) Using input driver 'libinput' for 'Power Button'
[ 9.244] (**) Power Button: always reports core events
[ 9.244] (**) Option "Device" "/dev/input/event0"
[ 9.244] (**) Option "_source" "server/udev"
[ 9.246] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.246] (II) event0 - Power Button: device is a keyboard
[ 9.246] (II) event0 - Power Button: device removed
[ 9.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 9.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 9.268] (**) Option "xkb_model" "pc105"
[ 9.268] (**) Option "xkb_layout" "us"
[ 9.271] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.271] (II) event0 - Power Button: device is a keyboard
[ 9.272] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 9.272] (II) No input driver specified, ignoring this device.
[ 9.272] (II) This device may have been added with another device file.
[ 9.273] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 9.273] (II) No input driver specified, ignoring this device.
[ 9.273] (II) This device may have been added with another device file.
[ 9.274] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event11)
[ 9.274] (II) No input driver specified, ignoring this device.
[ 9.274] (II) This device may have been added with another device file.
[ 9.275] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[ 9.275] (II) No input driver specified, ignoring this device.
[ 9.275] (II) This device may have been added with another device file.
[ 9.276] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event13)
[ 9.276] (II) No input driver specified, ignoring this device.
[ 9.276] (II) This device may have been added with another device file.
[ 9.277] (II) config/udev: Adding input device Chicony HP Elite USB Keyboard (/dev/input/event3)
[ 9.277] (**) Chicony HP Elite USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.277] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard'
[ 9.277] (**) Chicony HP Elite USB Keyboard: always reports core events
[ 9.277] (**) Option "Device" "/dev/input/event3"
[ 9.277] (**) Option "_source" "server/udev"
[ 9.279] (II) event3 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.279] (II) event3 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.279] (II) event3 - Chicony HP Elite USB Keyboard: device removed
[ 9.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:03F0:034A.0001/input/input6/event3"
[ 9.308] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard" (type: KEYBOARD, id 9)
[ 9.308] (**) Option "xkb_model" "pc105"
[ 9.308] (**) Option "xkb_layout" "us"
[ 9.312] (II) event3 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.312] (II) event3 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.314] (II) config/udev: Adding input device Chicony HP Elite USB Keyboard System Control (/dev/input/event4)
[ 9.314] (**) Chicony HP Elite USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 9.314] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard System Control'
[ 9.314] (**) Chicony HP Elite USB Keyboard System Control: always reports core events
[ 9.314] (**) Option "Device" "/dev/input/event4"
[ 9.314] (**) Option "_source" "server/udev"
[ 9.317] (II) event4 - Chicony HP Elite USB Keyboard System Control: is tagged by udev as: Keyboard
[ 9.317] (II) event4 - Chicony HP Elite USB Keyboard System Control: device is a keyboard
[ 9.317] (II) event4 - Chicony HP Elite USB Keyboard System Control: device removed
[ 9.332] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input7/event4"
[ 9.332] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard System Control" (type: KEYBOARD, id 10)
[ 9.332] (**) Option "xkb_model" "pc105"
[ 9.332] (**) Option "xkb_layout" "us"
[ 9.336] (II) event4 - Chicony HP Elite USB Keyboard System Control: is tagged by udev as: Keyboard
[ 9.336] (II) event4 - Chicony HP Elite USB Keyboard System Control: device is a keyboard
[ 9.338] (II) config/udev: Adding input device Chicony HP Elite USB Keyboard Consumer Control (/dev/input/event5)
[ 9.338] (**) Chicony HP Elite USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.338] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard Consumer Control'
[ 9.338] (**) Chicony HP Elite USB Keyboard Consumer Control: always reports core events
[ 9.338] (**) Option "Device" "/dev/input/event5"
[ 9.339] (**) Option "_source" "server/udev"
[ 9.342] (II) event5 - Chicony HP Elite USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 9.342] (II) event5 - Chicony HP Elite USB Keyboard Consumer Control: device is a keyboard
[ 9.342] (II) event5 - Chicony HP Elite USB Keyboard Consumer Control: device removed
[ 9.360] (II) libinput: Chicony HP Elite USB Keyboard Consumer Control: needs a virtual subdevice
[ 9.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input8/event5"
[ 9.360] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard Consumer Control" (type: MOUSE, id 11)
[ 9.360] (**) Option "AccelerationScheme" "none"
[ 9.360] (**) Chicony HP Elite USB Keyboard Consumer Control: (accel) selected scheme none/0
[ 9.360] (**) Chicony HP Elite USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 9.360] (**) Chicony HP Elite USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 9.364] (II) event5 - Chicony HP Elite USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 9.364] (II) event5 - Chicony HP Elite USB Keyboard Consumer Control: device is a keyboard
[ 9.366] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/event6)
[ 9.366] (**) PixArt HP USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 9.366] (II) Using input driver 'libinput' for 'PixArt HP USB Optical Mouse'
[ 9.366] (**) PixArt HP USB Optical Mouse: always reports core events
[ 9.366] (**) Option "Device" "/dev/input/event6"
[ 9.366] (**) Option "_source" "server/udev"
[ 9.369] (II) event6 - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse
[ 9.369] (II) event6 - PixArt HP USB Optical Mouse: device is a pointer
[ 9.369] (II) event6 - PixArt HP USB Optical Mouse: device removed
[ 9.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:134A.0003/input/input9/event6"
[ 9.404] (II) XINPUT: Adding extended input device "PixArt HP USB Optical Mouse" (type: MOUSE, id 12)
[ 9.405] (**) Option "AccelerationScheme" "none"
[ 9.405] (**) PixArt HP USB Optical Mouse: (accel) selected scheme none/0
[ 9.405] (**) PixArt HP USB Optical Mouse: (accel) acceleration factor: 2.000
[ 9.405] (**) PixArt HP USB Optical Mouse: (accel) acceleration threshold: 4
[ 9.408] (II) event6 - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse
[ 9.409] (II) event6 - PixArt HP USB Optical Mouse: device is a pointer
[ 9.410] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/mouse0)
[ 9.410] (II) No input driver specified, ignoring this device.
[ 9.411] (II) This device may have been added with another device file.
[ 9.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 9.412] (II) No input driver specified, ignoring this device.
[ 9.412] (II) This device may have been added with another device file.
[ 9.413] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[ 9.413] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 9.413] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 9.413] (**) HP WMI hotkeys: always reports core events
[ 9.413] (**) Option "Device" "/dev/input/event8"
[ 9.413] (**) Option "_source" "server/udev"
[ 9.414] (II) event8 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.414] (II) event8 - HP WMI hotkeys: device is a keyboard
[ 9.414] (II) event8 - HP WMI hotkeys: device removed
[ 9.444] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 9.444] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 9.444] (**) Option "xkb_model" "pc105"
[ 9.444] (**) Option "xkb_layout" "us"
[ 9.446] (II) event8 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.446] (II) event8 - HP WMI hotkeys: device is a keyboard
[ 9.455] (**) Chicony HP Elite USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 9.455] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard Consumer Control'
[ 9.455] (**) Chicony HP Elite USB Keyboard Consumer Control: always reports core events
[ 9.455] (**) Option "Device" "/dev/input/event5"
[ 9.455] (**) Option "_source" "_driver/libinput"
[ 9.455] (II) libinput: Chicony HP Elite USB Keyboard Consumer Control: is a virtual subdevice
[ 9.455] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input8/event5"
[ 9.455] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard Consumer Control" (type: KEYBOARD, id 14)
[ 9.455] (**) Option "xkb_model" "pc105"
[ 9.455] (**) Option "xkb_layout" "us"
Xorg.0.log (with downgraded kernel)
[ 8.341]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 8.341] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 8.341] Current Operating System: Linux pbc-debian 4.9.0-8-amd64 #1 SMP Debian 4.9.130-2 (2018-10-27) x86_64
[ 8.341] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=dee31de4-9b67-40ed-be6f-b7e169c72b7a ro quiet
[ 8.341] Build Date: 25 October 2018 06:15:23PM
[ 8.341] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 8.341] Current version of pixman: 0.36.0
[ 8.341] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.341] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.341] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 5 09:46:22 2019
[ 8.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.344] (==) No Layout section. Using the first Screen section.
[ 8.344] (==) No screen section available. Using defaults.
[ 8.344] (**) |-->Screen "Default Screen Section" (0)
[ 8.344] (**) | |-->Monitor "<default monitor>"
[ 8.346] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.346] (==) Automatically adding devices
[ 8.346] (==) Automatically enabling devices
[ 8.346] (==) Automatically adding GPU devices
[ 8.346] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 8.347] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.347] Entry deleted from font path.
[ 8.348] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 8.348] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.348] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.348] (II) Loader magic: 0x55fa9da0ae20
[ 8.348] (II) Module ABI versions:
[ 8.348] X.Org ANSI C Emulation: 0.4
[ 8.348] X.Org Video Driver: 24.0
[ 8.348] X.Org XInput driver : 24.1
[ 8.348] X.Org Server Extension : 10.0
[ 8.349] (++) using VT number 7
[ 8.349] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 8.350] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.358] (--) PCI:*(0@0:1:0) 1002:9874:103c:8158 rev 136, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 8.358] (II) LoadModule: "glx"
[ 8.363] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.386] (II) Module glx: vendor="X.Org Foundation"
[ 8.386] compiled for 1.20.3, module version = 1.0.0
[ 8.386] ABI class: X.Org Server Extension, version 10.0
[ 8.386] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 8.386] loading driver: amdgpu
[ 8.386] (==) Matched amdgpu as autoconfigured driver 0
[ 8.386] (==) Matched ati as autoconfigured driver 1
[ 8.386] (==) Matched modesetting as autoconfigured driver 2
[ 8.386] (==) Matched fbdev as autoconfigured driver 3
[ 8.386] (==) Matched vesa as autoconfigured driver 4
[ 8.386] (==) Assigned the driver to the xf86ConfigLayout
[ 8.386] (II) LoadModule: "amdgpu"
[ 8.386] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 8.395] (II) Module amdgpu: vendor="X.Org Foundation"
[ 8.395] compiled for 1.20.1, module version = 18.1.0
[ 8.395] Module class: X.Org Video Driver
[ 8.395] ABI class: X.Org Video Driver, version 24.0
[ 8.395] (II) LoadModule: "ati"
[ 8.395] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 8.396] (II) Module ati: vendor="X.Org Foundation"
[ 8.396] compiled for 1.20.1, module version = 18.1.0
[ 8.396] Module class: X.Org Video Driver
[ 8.396] ABI class: X.Org Video Driver, version 24.0
[ 8.404] (II) LoadModule: "modesetting"
[ 8.405] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.407] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.407] compiled for 1.20.3, module version = 1.20.3
[ 8.407] Module class: X.Org Video Driver
[ 8.407] ABI class: X.Org Video Driver, version 24.0
[ 8.407] (II) LoadModule: "fbdev"
[ 8.407] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.408] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.408] compiled for 1.20.0, module version = 0.5.0
[ 8.408] Module class: X.Org Video Driver
[ 8.408] ABI class: X.Org Video Driver, version 24.0
[ 8.408] (II) LoadModule: "vesa"
[ 8.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.409] (II) Module vesa: vendor="X.Org Foundation"
[ 8.409] compiled for 1.20.1, module version = 2.4.0
[ 8.409] Module class: X.Org Video Driver
[ 8.409] ABI class: X.Org Video Driver, version 24.0
[ 8.409] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 8.409] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.409] (II) FBDEV: driver for framebuffer: fbdev
[ 8.409] (II) VESA: driver for VESA chipsets: vesa
[ 8.427] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 8.433] (WW) Falling back to old probe method for modesetting
[ 8.433] (WW) Falling back to old probe method for fbdev
[ 8.433] (II) Loading sub module "fbdevhw"
[ 8.433] (II) LoadModule: "fbdevhw"
[ 8.433] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.434] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.434] compiled for 1.20.3, module version = 0.0.2
[ 8.434] ABI class: X.Org Video Driver, version 24.0
[ 8.434] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.434] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 8.434] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 8.434] (==) AMDGPU(0): Default visual is TrueColor
[ 8.435] (==) AMDGPU(0): RGB weight 888
[ 8.435] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 8.435] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x9874)
[ 8.435] (II) Loading sub module "fb"
[ 8.435] (II) LoadModule: "fb"
[ 8.435] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.437] (II) Module fb: vendor="X.Org Foundation"
[ 8.437] compiled for 1.20.3, module version = 1.0.0
[ 8.437] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.437] (II) Loading sub module "dri2"
[ 8.437] (II) LoadModule: "dri2"
[ 8.437] (II) Module "dri2" already built-in
[ 9.060] (II) Loading sub module "glamoregl"
[ 9.060] (II) LoadModule: "glamoregl"
[ 9.060] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.082] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.082] compiled for 1.20.3, module version = 1.0.1
[ 9.082] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.147] (II) AMDGPU(0): glamor X acceleration enabled on AMD CARRIZO (DRM 3.8.0, 4.9.0-8-amd64, LLVM 7.0.1)
[ 9.147] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 9.147] (==) AMDGPU(0): TearFree property default: auto
[ 9.147] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 9.181] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 9.257] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 9.292] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 9.370] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 9.370] (II) AMDGPU(0): Manufacturer: IVM Model: 6630 Serial#: 1536
[ 9.370] (II) AMDGPU(0): Year: 2017 Week: 40
[ 9.370] (II) AMDGPU(0): EDID Version: 1.3
[ 9.370] (II) AMDGPU(0): Digital Display Input
[ 9.370] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 9.370] (II) AMDGPU(0): Gamma: 2.20
[ 9.370] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 9.370] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.370] (II) AMDGPU(0): First detailed timing is preferred mode
[ 9.370] (II) AMDGPU(0): redX: 0.668 redY: 0.332 greenX: 0.300 greenY: 0.625
[ 9.370] (II) AMDGPU(0): blueX: 0.143 blueY: 0.052 whiteX: 0.323 whiteY: 0.329
[ 9.370] (II) AMDGPU(0): Supported established timings:
[ 9.370] (II) AMDGPU(0): 640x480@60Hz
[ 9.370] (II) AMDGPU(0): 640x480@75Hz
[ 9.370] (II) AMDGPU(0): 800x600@60Hz
[ 9.370] (II) AMDGPU(0): 800x600@75Hz
[ 9.371] (II) AMDGPU(0): 1024x768@60Hz
[ 9.371] (II) AMDGPU(0): 1024x768@75Hz
[ 9.371] (II) AMDGPU(0): 1280x1024@75Hz
[ 9.371] (II) AMDGPU(0): Manufacturer's mask: 0
[ 9.371] (II) AMDGPU(0): Supported standard timings:
[ 9.371] (II) AMDGPU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 9.371] (II) AMDGPU(0): #1: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 9.371] (II) AMDGPU(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 9.371] (II) AMDGPU(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 9.371] (II) AMDGPU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 9.371] (II) AMDGPU(0): #5: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 9.371] (II) AMDGPU(0): #6: hsize: 2048 vsize 1280 refresh: 60 vid: 225
[ 9.371] (II) AMDGPU(0): Supported detailed timing:
[ 9.371] (II) AMDGPU(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 9.371] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 9.371] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 9.371] (II) AMDGPU(0): Serial No: 1152174001536
[ 9.371] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 89 kHz, PixClock max 275 MHz
[ 9.371] (II) AMDGPU(0): Monitor name: PL2792Q
[ 9.371] (II) AMDGPU(0): Supported detailed timing:
[ 9.371] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 597 x 336 mm
[ 9.371] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 9.371] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 9.371] (II) AMDGPU(0): Supported detailed timing:
[ 9.371] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 9.371] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 9.371] (II) AMDGPU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 9.371] (II) AMDGPU(0): Supported detailed timing:
[ 9.371] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 597 x 336 mm
[ 9.371] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 9.371] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 9.371] (II) AMDGPU(0): Supported detailed timing:
[ 9.371] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 597 x 336 mm
[ 9.371] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 9.371] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 9.371] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 9.371] (II) AMDGPU(0): EDID (in hex):
[ 9.371] (II) AMDGPU(0): 00ffffffffffff0026cd306600060000
[ 9.371] (II) AMDGPU(0): 281b0103803c2278ea0c9dab554ca024
[ 9.371] (II) AMDGPU(0): 0d5254254b009500a9c0a940b300d1c0
[ 9.371] (II) AMDGPU(0): d100e1000101565e00a0a0a029503020
[ 9.371] (II) AMDGPU(0): 350055502100001a000000ff00313135
[ 9.371] (II) AMDGPU(0): 32313734303031353336000000fd0032
[ 9.371] (II) AMDGPU(0): 4c1e591b000a202020202020000000fc
[ 9.371] (II) AMDGPU(0): 00504c32373932510a202020202001f1
[ 9.371] (II) AMDGPU(0): 020324f14f1005040302011112131406
[ 9.371] (II) AMDGPU(0): 0715161f230907078301000067030c00
[ 9.371] (II) AMDGPU(0): 10003836023a801871382d40582c4500
[ 9.371] (II) AMDGPU(0): 55502100001e011d8018711c1620582c
[ 9.371] (II) AMDGPU(0): 250055502100009e011d007251d01e20
[ 9.371] (II) AMDGPU(0): 6e28550055502100001e8c0ad08a20e0
[ 9.371] (II) AMDGPU(0): 2d10103e960055502100001800000000
[ 9.371] (II) AMDGPU(0): 0000000000000000000000000000005b
[ 9.372] (--) AMDGPU(0): HDMI max TMDS frequency 270000KHz
[ 9.372] (II) AMDGPU(0): Printing probed modes for output DisplayPort-1
[ 9.372] (II) AMDGPU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 9.372] (II) AMDGPU(0): Modeline "2048x1280"x60.0 221.28 2048 2192 2416 2784 1280 1281 1284 1325 -hsync +vsync (79.5 kHz)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.372] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.372] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 9.372] (II) AMDGPU(0): Output DisplayPort-1 connected
[ 9.372] (II) AMDGPU(0): Using exact sizes for initial modes
[ 9.372] (II) AMDGPU(0): Output DisplayPort-1 using initial mode 2560x1440 +0+0
[ 9.372] (II) AMDGPU(0): mem size init: gart size :6c41b800 vram size: s:1ea75000 visible:ea75000
[ 9.372] (==) AMDGPU(0): DPI set to (96, 96)
[ 9.372] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.373] (II) Loading sub module "ramdac"
[ 9.373] (II) LoadModule: "ramdac"
[ 9.373] (II) Module "ramdac" already built-in
[ 9.373] (II) UnloadModule: "modesetting"
[ 9.373] (II) Unloading modesetting
[ 9.373] (II) UnloadModule: "fbdev"
[ 9.373] (II) Unloading fbdev
[ 9.373] (II) UnloadSubModule: "fbdevhw"
[ 9.373] (II) Unloading fbdevhw
[ 9.373] (II) UnloadModule: "vesa"
[ 9.373] (II) Unloading vesa
[ 9.376] (II) AMDGPU(0): [DRI2] Setup complete
[ 9.376] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 9.376] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 9.377] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[ 9.378] (II) AMDGPU(0): SYNC extension fences enabled
[ 9.379] (II) AMDGPU(0): Present extension enabled
[ 9.379] (==) AMDGPU(0): DRI3 enabled
[ 9.380] (==) AMDGPU(0): Backing store enabled
[ 9.380] (II) AMDGPU(0): Direct rendering enabled
[ 9.396] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 9.396] (II) AMDGPU(0): Acceleration enabled
[ 9.396] (==) AMDGPU(0): DPMS enabled
[ 9.396] (==) AMDGPU(0): Silken mouse enabled
[ 9.397] (II) AMDGPU(0): Set up textured video (glamor)
[ 9.436] (II) Initializing extension Generic Event Extension
[ 9.436] (II) Initializing extension SHAPE
[ 9.436] (II) Initializing extension MIT-SHM
[ 9.437] (II) Initializing extension XInputExtension
[ 9.439] (II) Initializing extension XTEST
[ 9.439] (II) Initializing extension BIG-REQUESTS
[ 9.440] (II) Initializing extension SYNC
[ 9.440] (II) Initializing extension XKEYBOARD
[ 9.440] (II) Initializing extension XC-MISC
[ 9.441] (II) Initializing extension SECURITY
[ 9.441] (II) Initializing extension XFIXES
[ 9.442] (II) Initializing extension RENDER
[ 9.442] (II) Initializing extension RANDR
[ 9.443] (II) Initializing extension COMPOSITE
[ 9.443] (II) Initializing extension DAMAGE
[ 9.444] (II) Initializing extension MIT-SCREEN-SAVER
[ 9.444] (II) Initializing extension DOUBLE-BUFFER
[ 9.444] (II) Initializing extension RECORD
[ 9.445] (II) Initializing extension DPMS
[ 9.445] (II) Initializing extension Present
[ 9.446] (II) Initializing extension DRI3
[ 9.446] (II) Initializing extension X-Resource
[ 9.446] (II) Initializing extension XVideo
[ 9.447] (II) Initializing extension XVideo-MotionCompensation
[ 9.447] (II) Initializing extension SELinux
[ 9.447] (II) SELinux: Disabled on system
[ 9.447] (II) Initializing extension GLX
[ 9.457] (II) AIGLX: Loaded and initialized radeonsi
[ 9.457] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.457] (II) Initializing extension XFree86-VidModeExtension
[ 9.457] (II) Initializing extension XFree86-DGA
[ 9.458] (II) Initializing extension XFree86-DRI
[ 9.458] (II) Initializing extension DRI2
[ 9.465] (II) AMDGPU(0): Setting screen physical size to 677 x 381
[ 9.665] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.666] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.666] (II) LoadModule: "libinput"
[ 9.666] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 9.678] (II) Module libinput: vendor="X.Org Foundation"
[ 9.678] compiled for 1.20.1, module version = 0.28.1
[ 9.678] Module class: X.Org XInput Driver
[ 9.678] ABI class: X.Org XInput driver, version 24.1
[ 9.678] (II) Using input driver 'libinput' for 'Power Button'
[ 9.678] (**) Power Button: always reports core events
[ 9.678] (**) Option "Device" "/dev/input/event1"
[ 9.679] (**) Option "_source" "server/udev"
[ 9.685] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.685] (II) event1 - Power Button: device is a keyboard
[ 9.685] (II) event1 - Power Button: device removed
[ 9.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 9.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.712] (**) Option "xkb_model" "pc105"
[ 9.712] (**) Option "xkb_layout" "us"
[ 9.715] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 9.715] (II) event1 - Power Button: device is a keyboard
[ 9.716] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 9.716] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.716] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.716] (**) Video Bus: always reports core events
[ 9.716] (**) Option "Device" "/dev/input/event2"
[ 9.716] (**) Option "_source" "server/udev"
[ 9.718] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.718] (II) event2 - Video Bus: device is a keyboard
[ 9.718] (II) event2 - Video Bus: device removed
[ 9.752] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event2"
[ 9.752] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.752] (**) Option "xkb_model" "pc105"
[ 9.752] (**) Option "xkb_layout" "us"
[ 9.755] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 9.755] (II) event2 - Video Bus: device is a keyboard
[ 9.756] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 9.756] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.756] (II) Using input driver 'libinput' for 'Power Button'
[ 9.756] (**) Power Button: always reports core events
[ 9.756] (**) Option "Device" "/dev/input/event0"
[ 9.756] (**) Option "_source" "server/udev"
[ 9.758] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.758] (II) event0 - Power Button: device is a keyboard
[ 9.758] (II) event0 - Power Button: device removed
[ 9.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 9.784] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 9.784] (**) Option "xkb_model" "pc105"
[ 9.784] (**) Option "xkb_layout" "us"
[ 9.787] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 9.787] (II) event0 - Power Button: device is a keyboard
[ 9.789] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 9.789] (II) No input driver specified, ignoring this device.
[ 9.789] (II) This device may have been added with another device file.
[ 9.790] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[ 9.790] (II) No input driver specified, ignoring this device.
[ 9.790] (II) This device may have been added with another device file.
[ 9.790] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event9)
[ 9.791] (II) No input driver specified, ignoring this device.
[ 9.791] (II) This device may have been added with another device file.
[ 9.791] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event10)
[ 9.791] (II) No input driver specified, ignoring this device.
[ 9.791] (II) This device may have been added with another device file.
[ 9.792] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event11)
[ 9.792] (II) No input driver specified, ignoring this device.
[ 9.792] (II) This device may have been added with another device file.
[ 9.793] (II) config/udev: Adding input device Chicony HP Elite USB Keyboard (/dev/input/event3)
[ 9.793] (**) Chicony HP Elite USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.793] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard'
[ 9.793] (**) Chicony HP Elite USB Keyboard: always reports core events
[ 9.793] (**) Option "Device" "/dev/input/event3"
[ 9.793] (**) Option "_source" "server/udev"
[ 9.795] (II) event3 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.795] (II) event3 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.795] (II) event3 - Chicony HP Elite USB Keyboard: device removed
[ 9.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:03F0:034A.0001/input/input6/event3"
[ 9.808] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard" (type: KEYBOARD, id 9)
[ 9.808] (**) Option "xkb_model" "pc105"
[ 9.808] (**) Option "xkb_layout" "us"
[ 9.811] (II) event3 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.811] (II) event3 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.813] (II) config/udev: Adding input device Chicony HP Elite USB Keyboard (/dev/input/event4)
[ 9.813] (**) Chicony HP Elite USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.813] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard'
[ 9.813] (**) Chicony HP Elite USB Keyboard: always reports core events
[ 9.813] (**) Option "Device" "/dev/input/event4"
[ 9.813] (**) Option "_source" "server/udev"
[ 9.816] (II) event4 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.816] (II) event4 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.816] (II) event4 - Chicony HP Elite USB Keyboard: device removed
[ 9.832] (II) libinput: Chicony HP Elite USB Keyboard: needs a virtual subdevice
[ 9.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input7/event4"
[ 9.832] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard" (type: MOUSE, id 10)
[ 9.832] (**) Option "AccelerationScheme" "none"
[ 9.832] (**) Chicony HP Elite USB Keyboard: (accel) selected scheme none/0
[ 9.832] (**) Chicony HP Elite USB Keyboard: (accel) acceleration factor: 2.000
[ 9.833] (**) Chicony HP Elite USB Keyboard: (accel) acceleration threshold: 4
[ 9.836] (II) event4 - Chicony HP Elite USB Keyboard: is tagged by udev as: Keyboard
[ 9.836] (II) event4 - Chicony HP Elite USB Keyboard: device is a keyboard
[ 9.838] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/event5)
[ 9.838] (**) PixArt HP USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 9.838] (II) Using input driver 'libinput' for 'PixArt HP USB Optical Mouse'
[ 9.838] (**) PixArt HP USB Optical Mouse: always reports core events
[ 9.838] (**) Option "Device" "/dev/input/event5"
[ 9.838] (**) Option "_source" "server/udev"
[ 9.841] (II) event5 - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse
[ 9.841] (II) event5 - PixArt HP USB Optical Mouse: device is a pointer
[ 9.841] (II) event5 - PixArt HP USB Optical Mouse: device removed
[ 9.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:134A.0003/input/input8/event5"
[ 9.872] (II) XINPUT: Adding extended input device "PixArt HP USB Optical Mouse" (type: MOUSE, id 11)
[ 9.873] (**) Option "AccelerationScheme" "none"
[ 9.873] (**) PixArt HP USB Optical Mouse: (accel) selected scheme none/0
[ 9.873] (**) PixArt HP USB Optical Mouse: (accel) acceleration factor: 2.000
[ 9.873] (**) PixArt HP USB Optical Mouse: (accel) acceleration threshold: 4
[ 9.876] (II) event5 - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse
[ 9.876] (II) event5 - PixArt HP USB Optical Mouse: device is a pointer
[ 9.878] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/mouse0)
[ 9.878] (II) No input driver specified, ignoring this device.
[ 9.878] (II) This device may have been added with another device file.
[ 9.879] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 9.879] (II) No input driver specified, ignoring this device.
[ 9.879] (II) This device may have been added with another device file.
[ 9.880] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[ 9.880] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 9.880] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 9.880] (**) HP WMI hotkeys: always reports core events
[ 9.880] (**) Option "Device" "/dev/input/event12"
[ 9.880] (**) Option "_source" "server/udev"
[ 9.881] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.881] (II) event12 - HP WMI hotkeys: device is a keyboard
[ 9.881] (II) event12 - HP WMI hotkeys: device removed
[ 9.916] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event12"
[ 9.916] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 9.916] (**) Option "xkb_model" "pc105"
[ 9.916] (**) Option "xkb_layout" "us"
[ 9.918] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 9.918] (II) event12 - HP WMI hotkeys: device is a keyboard
[ 9.927] (**) Chicony HP Elite USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.927] (II) Using input driver 'libinput' for 'Chicony HP Elite USB Keyboard'
[ 9.927] (**) Chicony HP Elite USB Keyboard: always reports core events
[ 9.927] (**) Option "Device" "/dev/input/event4"
[ 9.927] (**) Option "_source" "_driver/libinput"
[ 9.927] (II) libinput: Chicony HP Elite USB Keyboard: is a virtual subdevice
[ 9.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:03F0:034A.0002/input/input7/event4"
[ 9.927] (II) XINPUT: Adding extended input device "Chicony HP Elite USB Keyboard" (type: KEYBOARD, id 13)
[ 9.927] (**) Option "xkb_model" "pc105"
[ 9.927] (**) Option "xkb_layout" "us"
[ 39.555] (II) AMDGPU(0): EDID vendor "IVM", prod id 26160
[ 39.555] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 39.555] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 39.555] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 39.555] (II) AMDGPU(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 39.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 39.555] (II) AMDGPU(0): Modeline "2048x1280"x60.0 221.33 2048 2192 2416 2784 1280 1281 1284 1325 -hsync +vsync (79.5 kHz e)
[ 39.556] (--) AMDGPU(0): HDMI max TMDS frequency 270000KHz
Reply to: