[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#867701: Radeon HD 6450, black screen, cursor, no console



On 07/10/2017 04:03 AM, Michel Dänzer wrote:

Sorry for the delay.

On 09/07/17 03:06 AM, Ivan Sergio Borgonovo wrote:
Package: xserver-xorg-video-radeon
Version: 1:7.9.0-1
Severity: grave

I doubt this severity is justified.

Why?
X doesn't start so it "makes the package in question unusable", not to mention that it makes all packages requiring X unusable.

I don't want to ‎polemicize but before assigning the severity I read the guidelines and grave seemed to fit. I think "grave" is the less serious severity level that will block upgrade if you have apt-listbugs installed.
You're welcome to correct me so I'll do a better work in next bug reports.

Upgrading from 1:7.8.0-1+b1 to 1:7.9.0-1, PC boot but I get a black
screen with cursor on the top left, I can't switch to console, xorg log
just say

[    28.383] (II) glamor: OpenGL accelerated X.org driver based.
[    28.441] (EE)
[    28.441] (EE) Backtrace:

Please attach the full Xorg log file and output of dmesg corresponding
to the problem.

dmesg doesn't report any error, only difference between the working box is different way to load fb since one box doesn't use grub efi and a slightly different video board. All software is at the same version level, the motherboard is the same and the CPU are nearly identical (AMD FX(tm)-6300 vs 6100).

Is there more information in the Xorg stderr output? Maybe try setting
the environment variable EGL_LOG_LEVEL=debug as well for that.

See atachments.

Does the same problem happen with 1:7.8.0-1+b1 with

	Option "AccelMethod" "glamor"

in /etc/X11/xorg.conf ?

Older xserver-xorg-video-radeon with that option DOESN'T WORK.
Black screen, text cursor at the top right corner ( _ ).

Newer xserver-xorg-video-radeon with that option DOESN'T WORK.
But I can't see the text cursor (_) anymore. Just black screen.

X log is the same.

Recent upgrade to 4.11.0-1 kernel didn't improve the situation.

Downgrading xserver-xorg-video-radeon and removing that option makes X work.

Thanks.

--
Ivan Sergio Borgonovo
http://www.webthatworks.it http://www.borgonovo.net

[    0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba9c7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba9c8000-0x00000000bab4bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bab4c000-0x00000000bab5bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bab5c000-0x00000000bb95cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb95d000-0x00000000bca39fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bca3a000-0x00000000bca3afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bca3b000-0x00000000bcc40fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcc41000-0x00000000bd082fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 LE R2.0, BIOS 2103 11/06/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EBFFF uncachable
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BD800000 mask FFFFFF800000 uncachable
[    0.000000]   3 base 0000BE000000 mask FFFFFE000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000023f000000 aka 9200M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff898580098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x7b141000, 0x7b141fff] PGTABLE
[    0.000000] BRK [0x7b142000, 0x7b142fff] PGTABLE
[    0.000000] BRK [0x7b143000, 0x7b143fff] PGTABLE
[    0.000000] BRK [0x7b144000, 0x7b144fff] PGTABLE
[    0.000000] BRK [0x7b145000, 0x7b145fff] PGTABLE
[    0.000000] BRK [0x7b146000, 0x7b146fff] PGTABLE
[    0.000000] BRK [0x7b147000, 0x7b147fff] PGTABLE
[    0.000000] BRK [0x7b148000, 0x7b148fff] PGTABLE
[    0.000000] BRK [0x7b149000, 0x7b149fff] PGTABLE
[    0.000000] BRK [0x7b14a000, 0x7b14afff] PGTABLE
[    0.000000] BRK [0x7b14b000, 0x7b14bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x375f4000-0x37af1fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BAB54070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BAB5AEB8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000BAB54168 006D50 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BB957F80 000040
[    0.000000] ACPI: APIC 0x00000000BAB5AFC8 00008E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BAB5B058 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BAB5B0A0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BAB5B0E0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: IVRS 0x00000000BAB5B3C0 0000C0 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000BAB5B170 00024C (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23eff9000-0x23effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ba9c7fff]
[    0.000000]   node   0: [mem 0x00000000bca3a000-0x00000000bca3afff]
[    0.000000]   node   0: [mem 0x00000000bcc41000-0x00000000bd082fff]
[    0.000000]   node   0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000023effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
[    0.000000] On node 0 totalpages: 2071987
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11897 pages used for memmap
[    0.000000]   DMA32 zone: 761367 pages, LIFO batch:31
[    0.000000]   Normal zone: 20416 pages used for memmap
[    0.000000]   Normal zone: 1306623 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xba9c8000-0xbab4bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab4c000-0xbab5bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab5c000-0xbb95cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb95d000-0xbca39fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbca3b000-0xbcc40fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] percpu: Embedded 37 pages/cpu @ffff8987bec00000 s111512 r8192 d31848 u262144
[    0.000000] pcpu-alloc: s111512 r8192 d31848 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2039589
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[    0.000000] Memory: 8069084K/8287948K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 218864K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:33024 nr_irqs:1016 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3575.890 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7151.78 BogoMIPS (lpj=14303560)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170119
[    0.009242] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009293] Security Framework initialized
[    0.009294] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009299] AppArmor: AppArmor disabled by boot time parameter
[    0.009756] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011620] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012463] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012471] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012700] CPU: Physical Processor ID: 0
[    0.012701] CPU: Processor Core ID: 0
[    0.012702] mce: CPU supports 7 MCE banks
[    0.012707] LVT offset 1 assigned for vector 0xf9
[    0.012711] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.012712] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.013746] Freeing SMP alternatives memory: 24K
[    0.016006] ftrace: allocating 25929 entries in 102 pages
[    0.024061] smpboot: Max logical packages: 1
[    0.028397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072000] smpboot: CPU0: AMD FX(tm)-6100 Six-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
[    0.072000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              48
[    0.072000] ... generic registers:      6
[    0.072000] ... value mask:             0000ffffffffffff
[    0.072000] ... max period:             00007fffffffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             000000000000003f
[    0.072000] smp: Bringing up secondary CPUs ...
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.072155] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.150022]  #2 #3 #4 #5
[    0.470022] smp: Brought up 1 node, 6 CPUs
[    0.470022] smpboot: Total of 6 processors activated (42909.79 BogoMIPS)
[    0.476092] sched_clock: Marking stable (476000000, 0)->(809727183, -333727183)
[    0.476492] devtmpfs: initialized
[    0.476543] x86/mm: Memory block size: 128MB
[    0.479389] PM: Registering ACPI NVS region [mem 0xbab5c000-0xbb95cfff] (14684160 bytes)
[    0.479708] PM: Registering ACPI NVS region [mem 0xbca3b000-0xbcc40fff] (2121728 bytes)
[    0.479805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.479816] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.479885] pinctrl core: initialized pinctrl subsystem
[    0.479991] NET: Registered protocol family 16
[    0.480179] cpuidle: using governor ladder
[    0.480235] cpuidle: using governor menu
[    0.480238] PCCT header not found.
[    0.480330] ACPI: bus type PCI registered
[    0.480331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.480408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.480410] PCI: not using MMCONFIG
[    0.480411] PCI: Using configuration type 1 for base access
[    0.480411] PCI: Using configuration type 1 for extended access
[    0.480761] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.480762] mtrr: probably your BIOS does not setup all CPUs.
[    0.480762] mtrr: corrected configuration.
[    0.481538] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.481539] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.481852] ACPI: Added _OSI(Module Device)
[    0.481853] ACPI: Added _OSI(Processor Device)
[    0.481854] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.481855] ACPI: Added _OSI(Processor Aggregator Device)
[    0.482013] ACPI: Executed 2 blocks of module-level executable AML code
[    0.484582] ACPI : EC: EC started
[    0.484582] ACPI : EC: interrupt blocked
[    0.484588] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.484590] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.484591] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.484591] ACPI: Interpreter enabled
[    0.484606] ACPI: (supports S0 S3 S4 S5)
[    0.484607] ACPI: Using IOAPIC for interrupt routing
[    0.484732] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.484765] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.484776] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.489941] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.489945] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.489948] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.490257] PCI host bridge to bus 0000:00
[    0.490259] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.490260] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.490261] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.490262] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.490263] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.490264] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.490266] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.490267] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.490276] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.490381] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    0.490481] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.490516] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.490565] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.490595] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.490627] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.490675] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.490706] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.490738] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.490787] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.490826] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.490839] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.490846] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.490853] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.490859] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.490866] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.490873] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    0.490971] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.490981] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    0.491067] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.491099] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.491111] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    0.491171] pci 0000:00:12.2: supports D1 D2
[    0.491172] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.491218] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.491258] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.491268] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    0.491354] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.491385] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.491398] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    0.491458] pci 0000:00:13.2: supports D1 D2
[    0.491459] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.491505] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.491537] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.491656] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.491671] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.491721] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.491767] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.491795] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.491913] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.491983] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.492015] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.492025] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    0.492112] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.492143] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.492153] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    0.492240] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.492271] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.492284] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    0.492344] pci 0000:00:16.2: supports D1 D2
[    0.492345] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.492391] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.492424] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.492497] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.492567] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.492636] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.492710] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.492779] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.492890] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[    0.492905] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.492915] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    0.492922] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.492935] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    0.492975] pci 0000:01:00.0: supports D1 D2
[    0.493025] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[    0.493040] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    0.493108] pci 0000:01:00.1: supports D1 D2
[    0.506053] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.506056] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.506058] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.506061] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.506103] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.506116] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.506135] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.506147] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.506211] pci 0000:02:00.0: supports D1 D2
[    0.506212] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.518053] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.518056] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.518059] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.518104] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.518123] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    0.518216] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.530050] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.530054] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.530119] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.530126] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.530127] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.530128] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.530129] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.530130] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.530131] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.530132] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.530478] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.530537] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.530597] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.530655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[    0.530704] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.530742] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.530780] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.530818] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.530953] ACPI : EC: interrupt unblocked
[    0.530959] ACPI : EC: event unblocked
[    0.530963] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.530965] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.531052] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.531054] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.531055] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.531056] vgaarb: loaded
[    0.531128] PCI: Using ACPI for IRQ routing
[    0.537600] PCI: pci_cache_line_size set to 64 bytes
[    0.537645] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.537646] e820: reserve RAM buffer [mem 0xba9c8000-0xbbffffff]
[    0.537646] e820: reserve RAM buffer [mem 0xbca3b000-0xbfffffff]
[    0.537647] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[    0.537648] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[    0.537649] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[    0.537793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.537796] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.539853] clocksource: Switched to clocksource hpet
[    0.549939] VFS: Disk quotas dquot_6.6.0
[    0.549961] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.550029] pnp: PnP ACPI init
[    0.550122] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.550125] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.550366] system 00:01: [io  0x040b] has been reserved
[    0.550367] system 00:01: [io  0x04d6] has been reserved
[    0.550368] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.550370] system 00:01: [io  0x0c14] has been reserved
[    0.550371] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.550372] system 00:01: [io  0x0c52] has been reserved
[    0.550373] system 00:01: [io  0x0c6c] has been reserved
[    0.550374] system 00:01: [io  0x0c6f] has been reserved
[    0.550375] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.550377] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.550378] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.550379] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.550380] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.550382] system 00:01: [io  0x0800-0x089f] has been reserved
[    0.550383] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.550384] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.550387] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.550388] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.550390] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.550392] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.550393] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.550395] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.550396] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.550398] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.550399] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.550401] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550529] system 00:02: [io  0x0290-0x02af] has been reserved
[    0.550530] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550556] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.550608] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.550610] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550648] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.550796] pnp 00:06: [dma 0 disabled]
[    0.550833] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.550957] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[    0.550959] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.551052] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.551054] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.551162] pnp: PnP ACPI: found 9 devices
[    0.557625] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.557642] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.557644] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.557646] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.557648] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.557650] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.557652] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.557654] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.557657] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.557659] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.557662] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.557671] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.557673] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.557674] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.557675] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.557676] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.557677] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.557678] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.557679] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.557680] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.557681] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.557682] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.557683] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.557684] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.557686] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.557687] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.557688] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.557689] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.557690] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.557691] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.557692] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.557791] NET: Registered protocol family 2
[    0.557936] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.558075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.558269] TCP: Hash tables configured (established 65536 bind 65536)
[    0.558310] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.558341] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.558420] NET: Registered protocol family 1
[    0.880094] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.880248] PCI: CLS 64 bytes, default 64
[    0.880285] Unpacking initramfs...
[    0.951736] Freeing initrd memory: 5112K
[    0.952217] iommu: Adding device 0000:00:00.0 to group 0
[    0.952283] iommu: Adding device 0000:00:02.0 to group 1
[    0.952346] iommu: Adding device 0000:00:04.0 to group 2
[    0.952410] iommu: Adding device 0000:00:07.0 to group 3
[    0.952475] iommu: Adding device 0000:00:11.0 to group 4
[    0.952546] iommu: Adding device 0000:00:12.0 to group 5
[    0.952560] iommu: Adding device 0000:00:12.2 to group 5
[    0.952630] iommu: Adding device 0000:00:13.0 to group 6
[    0.952645] iommu: Adding device 0000:00:13.2 to group 6
[    0.952710] iommu: Adding device 0000:00:14.0 to group 7
[    0.952776] iommu: Adding device 0000:00:14.2 to group 8
[    0.952840] iommu: Adding device 0000:00:14.3 to group 9
[    0.952907] iommu: Adding device 0000:00:14.4 to group 10
[    0.952973] iommu: Adding device 0000:00:14.5 to group 11
[    0.953047] iommu: Adding device 0000:00:16.0 to group 12
[    0.953063] iommu: Adding device 0000:00:16.2 to group 12
[    0.953157] iommu: Adding device 0000:01:00.0 to group 13
[    0.953180] iommu: Adding device 0000:01:00.1 to group 13
[    0.953254] iommu: Adding device 0000:02:00.0 to group 14
[    0.953323] iommu: Adding device 0000:03:00.0 to group 15
[    1.037298] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.037298] AMD-Vi: Interrupt remapping enabled
[    1.037421] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.039128] perf: AMD NB counters detected
[    1.039274] LVT offset 0 assigned for vector 0x400
[    1.039343] perf: AMD IBS detected (0x000000ff)
[    1.039635] audit: initializing netlink subsys (disabled)
[    1.039684] audit: type=2000 audit(1500067802.032:1): state=initialized audit_enabled=0 res=1
[    1.039990] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.040065] zbud: loaded
[    1.041004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.041046] io scheduler noop registered
[    1.041047] io scheduler deadline registered
[    1.041062] io scheduler cfq registered (default)
[    1.041062] io scheduler mq-deadline registered
[    1.041822] GHES: HEST is not enabled!
[    1.041891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.062308] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.062637] Linux agpgart interface v0.103
[    1.062689] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.062690] AMD IOMMUv2 functionality not available on this system
[    1.063206] i8042: PNP: No PS/2 controller found.
[    1.063299] mousedev: PS/2 mouse device common for all mice
[    1.063325] rtc_cmos 00:03: RTC can wake from S4
[    1.063415] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.063439] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.063586] ledtrig-cpu: registered to indicate activity on CPUs
[    1.063964] NET: Registered protocol family 10
[    1.064161] Segment Routing with IPv6
[    1.064170] mip6: Mobile IPv6
[    1.064172] NET: Registered protocol family 17
[    1.064173] mpls_gso: MPLS GSO support
[    1.064505] microcode: CPU0: patch_level=0x0600063d
[    1.064511] microcode: CPU1: patch_level=0x0600063d
[    1.064519] microcode: CPU2: patch_level=0x0600063d
[    1.064525] microcode: CPU3: patch_level=0x0600063d
[    1.064531] microcode: CPU4: patch_level=0x0600063d
[    1.064536] microcode: CPU5: patch_level=0x0600063d
[    1.064566] microcode: Microcode Update Driver: v2.2.
[    1.064682] registered taskstats version 1
[    1.064696] zswap: loaded using pool lzo/zbud
[    1.064822] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.065047] rtc_cmos 00:03: setting system clock to 2017-07-14 21:30:02 UTC (1500067802)
[    1.065095] PM: Hibernation image not present or could not be loaded.
[    1.066322] Freeing unused kernel memory: 1436K
[    1.066323] Write protecting the kernel read-only data: 12288k
[    1.066884] Freeing unused kernel memory: 1712K
[    1.069690] Freeing unused kernel memory: 1308K
[    1.071079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.084301] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.084415] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.084427] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.084442] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.085364] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.085393] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.086883] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.086947] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.087008] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.087073] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.117175] SCSI subsystem initialized
[    1.117715] ACPI: bus type USB registered
[    1.117738] usbcore: registered new interface driver usbfs
[    1.117750] usbcore: registered new interface driver hub
[    1.117785] usbcore: registered new device driver usb
[    1.118589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.118799] libata version 3.00 loaded.
[    1.118876] ehci-pci: EHCI PCI platform driver
[    1.119015] QUIRK: Enable AMD PLL fix
[    1.119037] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.119044] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.119048] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.119056] ehci-pci 0000:00:12.2: debug port 1
[    1.119101] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    1.119257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.123252] AVX version of gcm_enc/dec engaged.
[    1.123253] AES CTR mode by8 optimization enabled
[    1.131870] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.131971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.131974] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.131975] usb usb1: Product: EHCI Host Controller
[    1.131976] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[    1.131977] usb usb1: SerialNumber: 0000:00:12.2
[    1.132143] hub 1-0:1.0: USB hub found
[    1.132161] hub 1-0:1.0: 5 ports detected
[    1.132509] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.132515] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.132520] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.132528] ehci-pci 0000:00:13.2: debug port 1
[    1.132569] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[    1.147958] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.148083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.148084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148086] usb usb2: Product: EHCI Host Controller
[    1.148086] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[    1.148087] usb usb2: SerialNumber: 0000:00:13.2
[    1.148210] hub 2-0:1.0: USB hub found
[    1.148225] hub 2-0:1.0: 5 ports detected
[    1.148421] ahci 0000:00:11.0: version 3.0
[    1.148580] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.148581] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.148935] scsi host0: ahci
[    1.149035] scsi host1: ahci
[    1.149076] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    1.149078] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    1.149218] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.149223] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.149226] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.149234] ehci-pci 0000:00:16.2: debug port 1
[    1.149270] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[    1.163978] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.164148] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.164149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.164151] usb usb3: Product: EHCI Host Controller
[    1.164151] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[    1.164152] usb usb3: SerialNumber: 0000:00:16.2
[    1.164284] hub 3-0:1.0: USB hub found
[    1.164298] hub 3-0:1.0: 4 ports detected
[    1.164813] ohci-pci: OHCI PCI platform driver
[    1.164957] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.164970] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.165005] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    1.227995] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.227996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.227997] usb usb4: Product: OHCI PCI host controller
[    1.227998] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[    1.227999] usb usb4: SerialNumber: 0000:00:12.0
[    1.228200] hub 4-0:1.0: USB hub found
[    1.228209] hub 4-0:1.0: 5 ports detected
[    1.228424] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.228428] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.228453] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[    1.291993] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.291995] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.291996] usb usb5: Product: OHCI PCI host controller
[    1.291997] usb usb5: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[    1.291998] usb usb5: SerialNumber: 0000:00:13.0
[    1.292178] hub 5-0:1.0: USB hub found
[    1.292189] hub 5-0:1.0: 5 ports detected
[    1.292388] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.292393] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.292411] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    1.355999] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.356001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.356002] usb usb6: Product: OHCI PCI host controller
[    1.356003] usb usb6: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[    1.356004] usb usb6: SerialNumber: 0000:00:14.5
[    1.356125] hub 6-0:1.0: USB hub found
[    1.356134] hub 6-0:1.0: 2 ports detected
[    1.356312] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.356316] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.356343] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[    1.420015] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.420017] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.420018] usb usb7: Product: OHCI PCI host controller
[    1.420019] usb usb7: Manufacturer: Linux 4.11.0-1-amd64 ohci_hcd
[    1.420020] usb usb7: SerialNumber: 0000:00:16.0
[    1.420206] hub 7-0:1.0: USB hub found
[    1.420215] hub 7-0:1.0: 4 ports detected
[    1.499997] usb 3-2: new high-speed USB device number 2 using ehci-pci
[    1.623979] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.624007] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.639801] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.639802] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.648604] usb 3-2: New USB device found, idVendor=1a40, idProduct=0201
[    1.648606] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.648607] usb 3-2: Product: USB 2.0 Hub [MTT]
[    1.648749] hub 3-2:1.0: USB hub found
[    1.648848] hub 3-2:1.0: 7 ports detected
[    1.675137] ata2.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[    1.675140] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.675536] ata1.00: configured for UDMA/133
[    1.675786] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  3B1Q PQ: 0 ANSI: 5
[    1.715979] usb 4-3: new low-speed USB device number 2 using ohci-pci
[    1.733436] ata2.00: configured for UDMA/133
[    1.733748] scsi 1:0:0:0: Direct-Access     ATA      ST3160815AS      B    PQ: 0 ANSI: 5
[    1.787967] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    1.789458] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.789482] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.789483] sd 1:0:0:0: [sdb] Write Protect is off
[    1.789485] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.789501] sd 0:0:0:0: [sda] Write Protect is off
[    1.789503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.789525] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.789544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.828194]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.828688] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.906087] usb 4-3: New USB device found, idVendor=046d, idProduct=c062
[    1.906089] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.906090] usb 4-3: Product: USB Laser Mouse
[    1.906091] usb 4-3: Manufacturer: Logitech
[    1.910649] hidraw: raw HID events driver (C) Jiri Kosina
[    1.917228] usbcore: registered new interface driver usbhid
[    1.917229] usbhid: USB HID core driver
[    1.917811] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:046D:C062.0001/input/input0
[    1.917892] hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-3/input0
[    1.984004] usb 5-1: New USB device found, idVendor=047d, idProduct=105e
[    1.984006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.984007] usb 5-1: Product: BCM92045B3 ROM
[    1.984008] usb 5-1: Manufacturer: Broadcom Corp
[    1.984009] usb 5-1: SerialNumber: 0019155FF861
[    2.003645]  sda: sda1 sda2 sda3
[    2.004199] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.051976] tsc: Refined TSC clocksource calibration: 3575.911 MHz
[    2.051986] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x338b6f5cb4d, max_idle_ns: 440795301032 ns
[    2.367963] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    2.403975] usb 4-4: new low-speed USB device number 3 using ohci-pci
[    2.456696] PM: Starting manual resume from disk
[    2.456699] PM: Hibernation image partition 8:18 present
[    2.456699] PM: Looking for hibernation image.
[    2.456949] PM: Image not found (code -22)
[    2.456951] PM: Hibernation image not present or could not be loaded.
[    2.605088] usb 4-4: New USB device found, idVendor=1c4f, idProduct=0002
[    2.605090] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.605092] usb 4-4: Product: USB Keykoard
[    2.605092] usb 4-4: Manufacturer: USB
[    2.612322] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:1C4F:0002.0002/input/input1
[    2.650718] usb 2-5: New USB device found, idVendor=048d, idProduct=1336
[    2.650720] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.650721] usb 2-5: Product: Mass Storage Device
[    2.650722] usb 2-5: Manufacturer: Generic   
[    2.650723] usb 2-5: SerialNumber: 00000000000006
[    2.672192] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:12.0-4/input0
[    2.676355] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:1C4F:0002.0003/input/input2
[    2.736184] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:12.0-4/input1
[    2.856826] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.885626] random: fast init done
[    3.076046] clocksource: Switched to clocksource tsc
[    4.785008] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.838654] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[    4.838810] systemd[1]: Detected architecture x86-64.
[    4.843349] systemd[1]: Set hostname to <dawn>.
[    6.302625] systemd[1]: Configuration file /etc/systemd/system/postfix.service.d/override.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    6.778745] systemd[1]: Listening on udev Control Socket.
[    6.778891] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.779788] systemd[1]: Created slice System Slice.
[    6.779837] systemd[1]: Listening on Journal Socket.
[    6.779867] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.779876] systemd[1]: Reached target System Time Synchronized.
[    6.821214] EXT4-fs (sda3): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    6.827803] lp: driver loaded but no devices found
[    6.833531] ppdev: user-space parallel port driver
[    6.837671] RPC: Registered named UNIX socket transport module.
[    6.837672] RPC: Registered udp transport module.
[    6.837672] RPC: Registered tcp transport module.
[    6.837673] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.858050] loop: module loaded
[    6.873097] it87: Found IT8721F chip at 0x290, revision 1
[    8.152492] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    8.152567] ACPI: Power Button [PWRB]
[    8.152610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.152646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.152686] ACPI: Power Button [PWRF]
[    8.152841] wmi: Mapper loaded
[    8.224630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.224636] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    8.224770] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.225634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.225671] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    8.250408] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    8.250415] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[    8.311619] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    8.311864] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    8.311866] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.311867] usb usb8: Product: xHCI Host Controller
[    8.311868] usb usb8: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[    8.311869] usb usb8: SerialNumber: 0000:03:00.0
[    8.312028] hub 8-0:1.0: USB hub found
[    8.312037] hub 8-0:1.0: 2 ports detected
[    8.312128] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    8.312131] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[    8.312154] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.312176] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    8.312178] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.312179] usb usb9: Product: xHCI Host Controller
[    8.312180] usb usb9: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[    8.312180] usb usb9: SerialNumber: 0000:03:00.0
[    8.312301] hub 9-0:1.0: USB hub found
[    8.312312] hub 9-0:1.0: 2 ports detected
[    8.328456] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.328516] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[    8.328520] sp5100_tco: I/O address 0x0cd6 already in use
[    8.329654] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.329664] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.329869] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    8.330464] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffa6bdc0d89000, 50:46:5d:59:88:b8, XID 08000800 IRQ 37
[    8.330466] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    8.360297] Bluetooth: Core ver 2.22
[    8.360310] NET: Registered protocol family 31
[    8.360311] Bluetooth: HCI device and connection manager initialized
[    8.360314] Bluetooth: HCI socket layer initialized
[    8.360315] Bluetooth: L2CAP socket layer initialized
[    8.360325] Bluetooth: SCO socket layer initialized
[    8.403693] [drm] radeon kernel modesetting enabled.
[    8.414536] kvm: Nested Virtualization enabled
[    8.414539] kvm: Nested Paging enabled
[    8.414644] usbcore: registered new interface driver btusb
[    8.417852] EDAC MC: Ver: 3.0.0
[    8.418891] CRAT table not found
[    8.418892] Finished initializing topology ret=0
[    8.418904] kfd kfd: Initialized module
[    8.430788] MCE: In-kernel MCE decoding enabled.
[    8.430910] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1682:0x3200 0x00).
[    8.430920] [drm] register mmio base: 0xFEA20000
[    8.430920] [drm] register mmio size: 131072
[    8.430977] ATOM BIOS: Caicos
[    8.431501] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    8.431503] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    8.431507] [drm] Detected VRAM RAM=1024M, BAR=256M
[    8.431508] [drm] RAM width 64bits DDR
[    8.431891] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.431892] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    8.432461] [TTM] Zone  kernel: Available graphics memory: 4072314 kiB
[    8.432462] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    8.432463] [TTM] Initializing pool allocator
[    8.432467] [TTM] Initializing DMA pool allocator
[    8.432487] [drm] radeon: 1024M of VRAM memory ready
[    8.432488] [drm] radeon: 1024M of GTT memory ready.
[    8.432498] [drm] Loading CAICOS Microcode
[    8.433083] usb-storage 2-5:1.0: USB Mass Storage device detected
[    8.433962] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.433964] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.433965] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.433966] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.433967] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    8.433968] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.433969] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.433970] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.433971] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.435907] scsi host2: usb-storage 2-5:1.0
[    8.436030] usbcore: registered new interface driver usb-storage
[    8.437885] usbcore: registered new interface driver uas
[    8.448584] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_pfp.bin
[    8.448651] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    8.448713] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    8.448780] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    8.448834] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    8.448965] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    8.449660] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_me.bin
[    8.450655] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin
[    8.456597] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_mc.bin
[    8.457282] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CAICOS_smc.bin
[    8.457287] [drm] Internal thermal controller without fan control
[    8.461625] [drm] radeon: dpm initialized
[    8.471013] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[    8.471048] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    8.472236] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    8.487691] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    8.487794] radeon 0000:01:00.0: WB enabled
[    8.487796] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8987ae1e7c00
[    8.487798] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8987ae1e7c0c
[    8.488584] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa6bdc1e32118
[    8.488586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.488586] [drm] Driver supports precise vblank timestamp query.
[    8.488587] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    8.488632] radeon 0000:01:00.0: radeon: using MSI.
[    8.488658] [drm] radeon: irq initialized.
[    8.504972] [drm] ring test on 0 succeeded in 2 usecs
[    8.504983] [drm] ring test on 3 succeeded in 6 usecs
[    8.680836] [drm] ring test on 5 succeeded in 1 usecs
[    8.680847] [drm] UVD initialized successfully.
[    8.681096] [drm] ib test on ring 0 succeeded in 0 usecs
[    8.681155] [drm] ib test on ring 3 succeeded in 0 usecs
[    8.843054] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.997241] Adding 9765884k swap on /dev/sdb2.  Priority:-1 extents:1 across:9765884k FS
[    9.207010] random: crng init done
[    9.348118] [drm] ib test on ring 5 succeeded
[    9.348475] [drm] Radeon Display Connectors
[    9.348476] [drm] Connector 0:
[    9.348476] [drm]   HDMI-A-1
[    9.348477] [drm]   HPD4
[    9.348478] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    9.348478] [drm]   Encoders:
[    9.348479] [drm]     DFP1: INTERNAL_UNIPHY1
[    9.348479] [drm] Connector 1:
[    9.348480] [drm]   DVI-I-1
[    9.348480] [drm]   HPD1
[    9.348481] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    9.348481] [drm]   Encoders:
[    9.348482] [drm]     DFP2: INTERNAL_UNIPHY
[    9.348482] [drm] Connector 2:
[    9.348482] [drm]   VGA-1
[    9.348483] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    9.348484] [drm]   Encoders:
[    9.348484] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.444587] scsi 2:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    9.444996] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    9.447036] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    9.465179] [drm] fb mappable at 0xC0363000
[    9.465180] [drm] vram apper at 0xC0000000
[    9.465180] [drm] size 8294400
[    9.465181] [drm] fb depth is 24
[    9.465181] [drm]    pitch is 7680
[    9.465310] fbcon: radeondrmfb (fb0) is primary device
[    9.654100] Console: switching to colour frame buffer device 210x65
[    9.658995] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    9.672063] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[    9.672195] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    9.693582] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[    9.726754] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.907811] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.922706] systemd-journald[276]: Received request to flush runtime journal from PID 1
[    9.946189] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.009452] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[   10.134908] r8169 0000:02:00.0 eth0: link down
[   10.134947] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.134958] r8169 0000:02:00.0 eth0: link down
[   10.966926] vboxdrv: loading out-of-tree module taints kernel.
[   10.970767] vboxdrv: Found 6 processor cores
[   10.988161] vboxdrv: TSC mode is Invariant, tentative frequency 3575908702 Hz
[   10.988162] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[   11.212210] VBoxNetFlt: Successfully started.
[   11.223122] VBoxNetAdp: Successfully started.
[   11.234292] VBoxPciLinuxInit
[   11.242827] vboxpci: IOMMU found
[   11.393485] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   11.396806] br0: port 1(eth0) entered blocking state
[   11.396807] br0: port 1(eth0) entered disabled state
[   11.396905] device eth0 entered promiscuous mode
[   11.400254] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   11.567252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.567254] Bluetooth: BNEP filters: protocol multicast
[   11.567257] Bluetooth: BNEP socket layer initialized
[   13.033377] r8169 0000:02:00.0 eth0: link up
[   13.033856] br0: port 1(eth0) entered blocking state
[   13.033857] br0: port 1(eth0) entered forwarding state
[   13.033921] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   18.879865] input: lircd-uinput as /devices/virtual/input/input12
[   87.695684] FS-Cache: Loaded
[   87.707935] Key type dns_resolver registered
[   87.782164] FS-Cache: Netfs 'cifs' registered for caching
[   87.782215] Key type cifs.spnego registered
[   87.782218] Key type cifs.idmap registered
[   87.841112] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   87.841117] CIFS VFS: Send error in SessSetup = -13
[   87.841225] CIFS VFS: cifs_mount failed w/return code = -13
[   87.884857] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   87.884862] CIFS VFS: Send error in SessSetup = -13
[   87.884954] CIFS VFS: cifs_mount failed w/return code = -13

X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
Current Operating System: Linux dawn 4.11.0-1-amd64 #1 SMP Debian 4.11.6-1 (2017-06-19) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
Build Date: 07 July 2017  06:22:09AM
xorg-server 2:1.19.3-2 (https://www.debian.org/support) 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/ivan/.local/share/xorg/Xorg.0.log", Time: Fri Jul 14 23:50:13 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
libEGL debug: EGL search path is /usr/lib/x86_64-linux-gnu/egl
libEGL debug: added egl_dri2 to module array
(EE) 
(EE) Backtrace:
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
[    22.469] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    22.469] X Protocol Version 11, Revision 0
[    22.469] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[    22.469] Current Operating System: Linux dawn 4.11.0-1-amd64 #1 SMP Debian 4.11.6-1 (2017-06-19) x86_64
[    22.469] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-1-amd64 root=UUID=dcd7e032-24f6-4b6c-bd4a-0f2fd179a15e ro quiet splash
[    22.469] Build Date: 07 July 2017  06:22:09AM
[    22.469] xorg-server 2:1.19.3-2 (https://www.debian.org/support) 
[    22.469] Current version of pixman: 0.34.0
[    22.469] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    22.469] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.469] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 14 23:30:23 2017
[    22.469] (==) Using config file: "/etc/X11/xorg.conf"
[    22.469] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.469] (==) No Layout section.  Using the first Screen section.
[    22.469] (==) No screen section available. Using defaults.
[    22.469] (**) |-->Screen "Default Screen Section" (0)
[    22.469] (**) |   |-->Monitor "<default monitor>"
[    22.470] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    22.470] (**) |   |-->Device "Radeon"
[    22.470] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    22.470] (**) Option "Xinerama" "off"
[    22.470] (==) Automatically adding devices
[    22.470] (==) Automatically enabling devices
[    22.470] (==) Automatically adding GPU devices
[    22.470] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    22.470] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.470] 	Entry deleted from font path.
[    22.470] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    22.470] (==) ModulePath set to "/usr/lib/xorg/modules"
[    22.470] (==) |-->Input Device "Generic Keyboard"
[    22.470] (==) No Layout section. Using the first core keyboard device.
[    22.470] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.470] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    22.470] (WW) Disabling Generic Keyboard
[    22.470] (II) Loader magic: 0x555d68b22e00
[    22.470] (II) Module ABI versions:
[    22.470] 	X.Org ANSI C Emulation: 0.4
[    22.470] 	X.Org Video Driver: 23.0
[    22.470] 	X.Org XInput driver : 24.1
[    22.470] 	X.Org Server Extension : 10.0
[    22.470] (++) using VT number 7

[    22.470] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    22.471] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.472] (--) PCI:*(0:1:0:0) 1002:6779:1682:3200 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    22.472] (II) LoadModule: "glx"
[    22.472] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.473] (II) Module glx: vendor="X.Org Foundation"
[    22.473] 	compiled for 1.19.3, module version = 1.0.0
[    22.473] 	ABI class: X.Org Server Extension, version 10.0
[    22.473] (II) LoadModule: "radeon"
[    22.473] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    22.474] (II) Module radeon: vendor="X.Org Foundation"
[    22.474] 	compiled for 1.19.3, module version = 7.9.0
[    22.474] 	Module class: X.Org Video Driver
[    22.474] 	ABI class: X.Org Video Driver, version 23.0
[    22.474] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    22.476] (II) [KMS] Kernel modesetting enabled.
[    22.476] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    22.476] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    22.476] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    22.476] (==) RADEON(0): Default visual is TrueColor
[    22.476] (**) RADEON(0): Option "AccelMethod" "glamor"
[    22.476] (==) RADEON(0): RGB weight 888
[    22.476] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    22.476] (--) RADEON(0): Chipset: "CAICOS" (ChipID = 0x6779)
[    22.476] (II) Loading sub module "fb"
[    22.476] (II) LoadModule: "fb"
[    22.476] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.476] (II) Module fb: vendor="X.Org Foundation"
[    22.476] 	compiled for 1.19.3, module version = 1.0.0
[    22.476] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.476] (II) Loading sub module "dri2"
[    22.476] (II) LoadModule: "dri2"
[    22.476] (II) Module "dri2" already built-in
[    22.476] (II) Loading sub module "glamoregl"
[    22.476] (II) LoadModule: "glamoregl"
[    22.476] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    22.481] (II) Module glamoregl: vendor="X.Org Foundation"
[    22.481] 	compiled for 1.19.3, module version = 1.0.0
[    22.481] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.481] (II) glamor: OpenGL accelerated X.org driver based.
[    22.539] (EE) 
[    22.539] (EE) Backtrace:

Reply to: